SEARCH · Search NASA

Results for “oxide interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Chemical Analysis of Tantalum Thin Films compared to Niobium Thin Films using SIMS and XPS

Superconducting qubits are a leading platform for quantum computation. These circuits are typically made from superconducting materials like aluminum or niobium. However, the amorphous niobium oxide and aluminum oxide on the surface of these circuits introduce considerable RF loss due to the presence of two-level systems (TLS), which limits the maximum coherence times T1 to ~100 μs. Capping the niobium qubits with a tantalum layer leads to a 3- 5x improvement [Bal et al., 2024]. But even in this case, tantalum forms an amorphous surface oxide that introduces loss. In an effort to devise strategies to eliminate the presence of this oxide, we present a comprehensive study on the nature of Ta oxide using x-ray photoemission spectroscopy (XPS) and secondary ion mass spectrometry (ToF-SIMS) as a function of heat treatment. The thin films were annealed in ultra-high vacuum conditions and analyzed in situ to characterize the composition and evolution of the native tantalum oxide layer and oxide-metal interface. Our analysis reveals two critical differences between tantalum and niobium oxides: Nb2O5 completely dissolves at 400°C, while Ta2O5 persists even at 800°C. Additionally, tantalum oxide contains only a single suboxide (TaO), in contrast to niobium's two suboxides (NbO and NbO2). The suboxide of tantalum contributes minimally to the total oxide content and shows a relative increase with temperature. Understanding the oxide’s behavior will open new pathways for optimizing coherence times in tantalum qubits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1988

Diffusional transport during the cyclic oxidation of gamma + beta, Ni-Cr-Al(Y, Zr) alloys

The cyclic oxidation behavior of several cast gamma + beta, Ni-Cr-Al(Y, Zr) alloys and one low-pressure plasma spraying gamma + beta, Ni-Co-Cr-Al(Y) alloy was studied. Cyclic oxidation was found to result in a decreasing Al concentration at the oxide-metal interface due to a high rate of Al consumption coupled with oxide scale cracking and spalling. Diffusion paths plotted on the ternary phase diagram showed higher Ni concentrations with increasing cyclic oxidation exposures. The alloy with the highest rate of Al consumption and the highest Al content underwent breakaway oxidation following 500 1-hr cycles at 1200 C.

Nesbitt, J. A.↗

NASA NTRS1983

Developments toward an 18% efficient silicon solar cell

Limitations to increased open-circuit voltage were identified and experimentally verified for 0.1 ohm-cm solar cells with heavily doped emitters. After major reduction in the dark current contribution from the metal-silicon interface of the grid contacts, the surface recombination velocity of the oxide-silicon interface of shallow junction solar cells is the limiting factor. In deep junction solar cells, where the junction field does not aid surface collection, the emitter bulk is the limiting factor. Singly-diffused, shallow junction cells have been fabricated with open circuit voltages in excess of 645 mV. Double-diffusion shallow and deep junctions cells have displayed voltages above 650 mV. MIS solar cells formed on 0.1 ohm-cm substrates have exibited the lowest dark currents produced in the course of the contract work.

Meulenberg, A., Jr.↗

NASA NTRS1990

Oxidation characteristics of Ti-25Al-10Nb-3V-1Mo intermetallic alloy

Static oxidation kinetics of the super-alpha 2 titanium-aluminide alloy Ti-25Al-10Nb-3V-1Mo (at. percent) were investigated in air over the temperature range of 650 to 1000 C using thermogravimetric analysis. The oxidation kinetics were complex at all exposure temperatures and displayed up to three distinct oxidation rates. Breakaway oxidation occurred after long exposure times at high temperatures. Oxidation products were determined using x ray diffraction techniques, electron microprobe analysis, and energy dispersive x ray analysis. Oxide scale morphology was examined by scanning electron microscopy of the surfaces and cross sections of oxidized specimens. The oxides during the parabolic stages were compact and multilayered, consisting primarily of TiO2 doped with Nb, a top layer of Al2O3, and a thin bottom layer of TiN. The transition between the second and third parabolic stage was found to be linked to the formation of a TiAl layer at the oxide-metal interface. Porosity was formed during the third stage, causing degradation of the oxide and the beginning of breakaway oxidation.

Wallace, Terryl A.↗

NASA NTRS1992

Oxidation characteristics of Ti-25Al-10Nb-3V-1Mo

Static oxidation kinetics of the super-alpha 2 titanium-aluminide alloy Ti-25Al-10Nb-3V-1Mo (at. percent) were investigated in air over the temperature range of 650 to 1000 C using thermogravimetric analysis. The oxidation kinetics were complex at all exposure temperatures and displayed up to three distinct oxidation rates. Breakaway oxidation occurred after long exposure times at high temperatures. Oxidation products were determined using X-ray diffraction techniques, electron microprobe analysis, and energy dispersive X-ray analysis. Oxide scale morphology was examined by scanning electron microscopy of the surfaces and cross sections of oxidized specimens. The oxides during the parabolic stages were compact and multilayered, consisting primarily of TiO2 doped with Nb, a top layer of Al2O3, and a thin bottom layer of TiN. The transition between the second and third parabolic stage was found to be linked to the formation of a TiAl layer at the oxide-metal interface. Porosity was formed during the third stage, causing degradation of the oxide and the beginning of breakaway oxidation.

Wallace, T. A.↗

DOE OSTI2025

Novel inverse oxide/metal catalysts for methanol synthesis: impact of oxide–metal interactions and reversible morphological changes

Inverse oxide/metal catalysts have proved to be excellent systems for the generation of methanol by CO 2 hydrogenation or the partial oxidation of methane. These systems can exhibit unique structural and chemical properties due to the nano size of the oxide component and strong oxide–metal interactions. Recent studies for ZnO/Cu, CeO 2 /Cu, TiO 2/ Cu, MgO/Cu, In 2 O 3 /Cu, and In 2 O 3 /Au catalysts have shown large variations in the composition and morphology of the oxide overlayer as a function of temperature and chemical environment. These oxide–metal interfaces are able to react with CO 2 and CH 4 at room temperature, and both reactants have a strong influence on the physical and chemical properties of the catalysts. Under reaction conditions, switches between oxide–metal and metal–metal interfaces can take in the catalyst surface. A dynamic behavior that can be linked to a high selectivity for methanol production over systems such as ZnO/Cu, CeO 2 /Cu and In 2 O 3 /Au. Finally, this type of correlation deserves additional systematic studies since it could be a powerful tool for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Structure Prediction of Ionic Epitaxial Interfaces with Ogre Demonstrated for Colloidal Heterostructures of Lead Halide Perovskites

Colloidal epitaxial heterostructures are nanoparticles composed of two different materials connected at an interface, which can exhibit properties different from those of their individual components. Combining dissimilar materials offers exciting opportunities to create a wide variety of functional heterostructures. However, assessing structural compatibility–the main prerequisite for epitaxial growth–is challenging when pairing complex materials with different lattice parameters and crystal structures. This complicates both the selection of target heterostructures for synthesis and the assignment of interface models when new heterostructures are obtained. Here, we demonstrate Ogre as a powerful tool to accelerate the design and characterization of colloidal heterostructures. To this end, we implemented developments tailored for the high-efficiency prediction of epitaxial interfaces between ionic/polar materials, which encompass most colloidal semiconductors. These include the use of pre-screening candidate models based on charge balance at the interface and the use of a classical potential for fast energy evaluations, with parameters automatically calculated based on the input bulk structures. These developments are validated for perovskite-based CsPbBr 3 /Pb 4 S 3 Br 2 heterostructures, where Ogre produces interface models in excellent agreement with density functional theory and experiments. Furthermore, we use Ogre to rationalize the templating effect of CsPbCl 3 on the growth of lead sulfochlorides, where perovskite seeds induce the formation of Pb 4 S 3 Cl 2 rather than Pb 3 S 2 Cl 2 due to better epitaxial compatibility. Finally, combining Ogre simulations with experimental data enables us to unravel the structure and composition of the hitherto unsolved CsPbBr 3 /Bi x Pb y S z interface, and to assign a structure to several other reported metal halide- and oxide-based interfaces. The Ogre package is available on GitHub or via the OgreInterface desktop application, available for Windows, Linux, and Mac.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Investigating the Adsorption–Desorption Kinetics of a Molecular Water Oxidation Catalyst at an Electrode Interface

Probing the dynamics of molecular catalysts at electrode–electrolyte interfaces is essential for understanding catalytic mechanisms. Structure-specific spectroscopic methods are particularly powerful for examining electrocatalytic interfaces but are mostly used under steady-state conditions. Herein, we combined surface-enhanced infrared absorption spectroscopy (SEIRAS) with phase-sensitive detection (PSD) to investigate the dynamics of a molecular Ir-based water oxidation catalyst at the Au–electrolyte interface. We found that the amplitude of the absorbance of the catalyst is anticorrelated to that of interfacial water. This anticorrelation can be understood by the adsorption of the electrooxidized catalyst on the electrode and concurrent displacement of interfacial water. The infrared signals from the interface exhibit an increasing phase lag with respect to the electrode potential with an increasing scan rate of the potential. Kinetic modeling suggests that the potential-dependent adsorption–desorption kinetics of the molecular catalyst on the electrode gives rise to this phase lag. Furthermore, this study shows that PSD-SEIRAS is a powerful tool for investigating the interfacial dynamics of electrocatalytic systems.

Catalysts↗

DOE OSTI2026

Elucidating the impact of stress states on grain boundary passivation in Ni-5Cr using the Rhines pack method

The oxidation behavior of a Ni–5Cr (at.%) alloy was evaluated at 420 ° C using the Rhines pack method and simultaneous tensile and compressive stress states via a miniature four-point bending fixture. At this moderate temperature, grain boundaries dominate mass transport and the resulting oxidation response. Oxidation produced approximately 1μ⁢m-wide protective Cr 2 O 3 films capping some grain boundaries and penetrative, intergranular Cr-rich oxides at other grain boundaries. Externally applied tensile and compressive stress during oxidation increased the prevalence of Cr 2 O 3 cap formation compared to no applied stress, with tensile stress resulting in more Cr 2 O 3 caps than compressive stress. The observed oxide cap morphology was similar across all test conditions. Regions under compressive stress showed an order of magnitude greater Cr depletion depth along the grain boundary. Chromium nitrides (CrN), likely from N contamination of the Rhines pack cell, were observed both at the oxide–metal interface and intergranularly within the alloy. Collectively these results demonstrate that applied stress promotes localized protective oxide cap formation over grain boundaries, with compressive stress additionally promoting deeper Cr depletion. Furthermore the experimental approach helped separate out the effects of stress on local oxide formation and grain boundary passivation.

4 point bend↗

NASA NTRS1987

High-temperature oxidation/corrosion of iron-based superalloys

The oxidation and sulfidation of several novel iron-base superalloys were evaluated in high-temperature cyclic tests. The experimental austenitic alloys examined were modifications of NASAUT-4GA which were developed for Stirling-engine application. The weight gains and resulting surface scales were measured and analyzed. Mixed oxide scales were found to form on all specimens exposed above 871 C. The build-up of these scales led to a depletion of Mn and Cr in a zone adjacent to the oxides. In addition, the initial oxidation of the Fe-rich alloy was inhibited by a thin but tenacious Si layer which formed at the interface between oxides and the parent layer. Sulfidation tests using Na2SO4 coatings resulted in the formation of a protective spinel and alpha-Fe2O3 phases. Preferential attack of the carbide phase by hydrogen was not observed after 350 h at 871 C.

Lemkey, F. D.↗

NASA NTRS1984

Space-charge behavior of 'Thin-MOS' diodes with MBE-grown silicon films

Basic theoretical and experimental characteristics of a novel 'Thin-MOS' technology, which has promising aspects for integrated high-frequency devices up to several hundred gigahertz are presented. The operation of such devices depends on charge injection into undoped silicon layers of about 1000-A thickness, grown by molecular beam epitaxy on heavily doped substrates, and isolation by thermally grown oxides of about 100-A thickness. Capacitance-voltage characteristics measured at high and low frequencies agree well with theoretical ones derived from uni and ambipolar space-charge models. It is concluded that after oxidation the residual doping in the epilayer is less than approximately 10 to the 16th/cu cm and rises by 3 orders of magnitude at the substrate interface within less than 100 A and that interface states at the oxide interface can be kept low.

Lieneweg, U.↗

DOE OSTI2025

Shubnikov–de Haas oscillations reaching the quantum limit in two-dimensional electron systems at SrTi⁢O 3 (111) interfaces

Transition metal oxides in the (111) orientation have been predicted to harbor topological phases and unconventional quantum states because of their hexagonal crystal symmetry and strong interactions between charge, spin, and orbital degrees of freedom. We report Shubnikov–de Haas oscillations into the quantum limit at magnetic fields up to 35 T in high-mobility (>20 000 c⁢m 2 V −1 s −1 ) two-dimensional electron liquids at (111)-oriented SrTi⁢O 3 interfaces with controllable carrier densities. Spin splitting is observed at low Landau levels, which is attributed to the interplay between the Zeeman splitting and Rashba spin-orbit coupling according to our theoretical modeling, yielding Landé factor 𝑔 = 0.29 and Rashba coefficient 𝛼 = 0.6 meV nm. Furthermore, at high magnetic field after the system reaches the lowest Landau level, the temperature dependence of the resistance shows a metallic to insulating state transition with the magnetoresistance changing significantly from a primarily quadratic to a large linear field dependence.

Magnetoresistance↗

NASA NTRS1993

On-Chip p-MOSFET Dosimetry

On-chip p-FETs were developed to monitor the radiation dose of n-well CMOS ICs by monitoring threshold voltage shifts due to radiation induced oxide and interface charge.

FETs↗

NASA NTRS1979

Some TEM observations of Al2O3 scales formed on NiCrAl alloys

The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids have been observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. It was postulated that the voids resulted from an excess number of oxygen vacancies near the oxide-metal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidations of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al,Cr)2O3 and Ni(Al,Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationships between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

Smialek, J.↗

DOE OSTI2026

Oxide-nitride heteroepitaxy for low-loss dielectrics in superconducting quantum circuits

Superconducting qubits show great promise for the realization of fault-tolerant quantum computing, but lossy, amorphous dielectrics limit current technology. Identifying highly crystalline and stoichiometric dielectrics with intrinsically low microwave loss is therefore a central materials challenge, yet experimentally validated platforms remain scarce. In this work, we integrate a crystalline dielectric into a heteroepitaxial TiN/$γ$-Al$_2$O$_3$/TiN trilayer grown via pulsed laser deposition. Correlative high-resolution imaging, diffraction, and spectroscopy measurements confirm the single-crystal quality and chemical integrity of all layers, with minimal defects and limited anion interdiffusion across the oxide-nitride interfaces. Using microwave lumped-element resonators with parallel-plate capacitors, we report the first direct measurement of the dielectric loss of epitaxial $γ$-Al$_2$O$_3$, for which we find a low intrinsic two-level system loss, $δ_{\text{TLS}}^0 = (2.8 \pm 0.1) \times 10^{-5}$. These results establish heteroepitaxial oxides on transition metal nitrides as an attractive materials platform for superconducting quantum circuits, particularly for integration into compact device architectures such as merged-element transmons and microwave kinetic inductance detectors.

Garcia-Wetten, David A. [Northwestern U.]↗

DOE OSTI2025

Ab Initio Insights to Metal Passivation: Diffusion and Defect Formation in Amorphous Zirconia and Alumina

Metal passivation refers to the formation of protective oxide films on metals, which shield them from further corrosion and oxidation, playing a crucial role in maintaining their stability. The mesoscopic Point Defect Model has successfully predicted passivity as a steady state process where oxide growth from oxygen vacancies at the metal/film interface competes with oxide dissolution at the film/environment interface. In this work, informed by the Point Defect Model parameters, we use first-principles calculations to calculate defect formation and atomic diffusion in amorphous materials and correlate these descriptors with the behavior and growth of the oxide film. Focusing on amorphous zirconia and alumina, we demonstrate that defect formation energies exhibit significant variability in amorphous systems. In alumina, vacancies dominate, with cation and anion vacancies occurring at comparable concentrations. Diffusion calculations for stoichiometric amorphous alumina and zirconia, as well as oxygen-deficient zirconia, reveal faster diffusion in the oxygen-deficient case, highlighting the impact of defects on transport. Comparison of calculated self-diffusion coefficients for the dominant defect species with experimentally measured oxide thicknesses shows a clear correlation, suggesting that first-principles-derived diffusivity information can serve as a key descriptor for surface passivation film growth.

Farnell, Mackinzie S. [University of California, B↗

NASA NTRS1996

Mullite fiber reinforced reaction bonded Si3N4 composites

Fracture toughnesses of brittle ceramic materials have been improved by introducing reinforcements and carefully tailored interface layers. Silicon carbide and Si3N4 have been emphasized as matrices of structural composites intended for high temperature service because they combine excellent mechanical, chemical, thermal and physical properties. Both matrices have been successfully toughened with SiC fibers, whiskers and particles for ceramic matrix composite (CMC) parts made by sintering, hot pressing or reaction forming processes. These SiC reinforced CMCs have exhibited significantly improved toughnesses at low and intermediate temperature levels, as well as retention of properties at high temperatures for selected exposures; however, they are vulnerable to attack from elevated temperature dry and wet oxidizing atmospheres after the matrix has cracked. Property degradation results from oxidation of interface layers and/or reinforcements. The problem is particularly acute for small diameter (-20 tim) polymer derived SiC fibers used for weavable toes. This research explored opportunities for reinforcing Si3N4 matrices with fibers having improved environmental stability; the findings should also be applicable to SiC matrix CMCs.

Saleh, T.↗

DOE OSTI2025

The role of the droplet interface in controlling the multiphase oxidation of thiosulfate by ozone

Predicting reaction kinetics in aqueous microdroplets, including aerosols and cloud droplets, is challenging due to the probability that the underlying reaction mechanism can occur both at the surface and in the interior of the droplet. Additionally, few studies directly measure the surface activities of doubly charged anions, despite their prevalence in the atmosphere. Here, deep-UV second harmonic generation spectroscopy is used to probe surface affinities of the doubly charged anions thiosulfate, sulfate, and sulfite, key species in the thiosulfate ozonation reaction mechanism. Thiosulfate has an appreciable surface affinity with a measured Gibbs free energy of adsorption of -7.3 ± 2.5 kJ mol -1 in neutral solution, while sulfate and sulfite exhibit negligible surface propensity. The Gibbs free energy is combined with data from liquid flat jet ambient pressure X-ray photoelectron spectroscopy to constrain the concentration of thiosulfate at the surface in our model. Stochastic kinetic simulations leveraging these novel measurements show that the primary reaction between thiosulfate and ozone occurs at the interface and in the bulk, with the contribution of the interface decreasing from ~65% at pH 5 to ~45% at pH 13. Additionally, sulfate, the major product of thiosulfate ozonation and an important species in atmospheric processes, can be produced by two different pathways at pH 5, one with a contribution from the interface of >70% and the other occurring predominantly in the bulk (>98%). The observations in this work have implications for mining wastewater remediation, atmospheric chemistry, and understanding other complex reaction mechanisms in multiphase environments. Future interfacial or microdroplet/aerosol chemistry studies should carefully consider the role of both surface and bulk chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗