Search NASA⌕ Search

SEARCH · Search NASA

Results for “preforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Enhancement of injection and acceleration of electrons in a laser wakefield accelerator by using an argon-doped hydrogen gas jet and optically preformed plasma waveguide

A systematic experimental study on injection of electrons in a gas-jet-based laser wakefield accelerator via ionization of dopant was conducted. The pump-pulse threshold energy for producing a quasi-monoenergetic electron beam was significantly reduced by doping the hydrogen gas jet with argon atoms, resulting in a much better spatial contrast of the electron beam. Furthermore, laser wakefield electron acceleration in an optically preformed plasma waveguide based on the axicon-ignitor-heater scheme was achieved. It was found that doping with argon atoms can also lower the pump-pulse threshold energy in this experimental configuration.

43 PARTICLE ACCELERATORS↗

Second harmonic generation by relativistic self-focusing of q-Gaussian laser beam in preformed parabolic plasma channel

This paper presents an investigation of relativistic self-focusing effect of a q-Gaussian laser beam on second harmonic generation in a preformed parabolic plasma channel. An expression has been derived for density perturbation associated with the plasma wave excited by the laser beam. This in turn acts as a source of second harmonic generation. The moment theory approach has been used to derive a differential equation that governs the evolution of spot size of the laser beam with the distance of propagation. The detailed effects of intensity distribution deviation from Gaussian distribution, intensity of laser beam, density, and depth of the channel have been studied on self-focusing as well as on second harmonic generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Second harmonic generation of q-Gaussian laser beam in preformed collisional plasma channel with nonlinear absorption

This paper presents a scheme for second harmonic generation of an intense q-Gaussian laser beam in a preformed parabolic plasma channel, where collisional nonlinearity is operative with nonlinear absorption. Due to nonuniform irradiance of intensity along the wavefront of the laser beam, nonuniform Ohmic heating of plasma electrons takes place. Due to this nonuniform heating of plasma, the laser beam gets self-focused and produces strong density gradients in the transverse direction. The generated density gradients excite an electron plasma wave at pump frequency that interacts with the pump beam to produce its second harmonics. The formulation is based on a numerical solution of the nonlinear Schrodinger wave equation in WKB approximation followed by moment theory approach. A second order nonlinear differential equation governing the propagation dynamics of the laser beam with distance of propagation has been obtained and is solved numerically by Runge Kutta fourth order technique. The effect of nonlinear absorption on self-focusing of the laser beam and conversion efficiency of its second harmonics has been investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical-field-ionization collisional-excitation x-ray lasers with an optically preformed plasma waveguide

Optical-field-ionization x-ray lasers in an optically preformed plasma waveguide for pure xenon, krypton, and argon gases, respectively, are achieved. In addition to the 46.9 nm main lasing line for Ne-like argon, the 45.1 and 46.5 nm lasing lines are also observed, indicative of the strong enhancement effect and the large gas density in the plasma waveguide. With this technique multispecies parallel x-ray lasing is also demonstrated in a Kr-Ar mixed-gas waveguide. Extensive experimental results including the pump-energy dependence, the density dependence, and the effects of parameters that control the waveguide fabrication are reported and discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Interacting preformed Cooper pairs in resonant Fermi gases

We consider the normal phase of a strongly interacting Fermi gas, which can have either an equal or an unequal number of atoms in its two accessible spin states. Due to the unitarity-limited attractive interaction between particles with different spin, noncondensed Cooper pairs are formed. The starting point in treating preformed pairs is the Nozieres-Schmitt-Rink (NSR) theory, which approximates the pairs as being noninteracting. Here, we consider the effects of the interactions between the Cooper pairs in a Wilsonian renormalization-group scheme. Starting from the exact bosonic action for the pairs, we calculate the Cooper-pair self-energy by combining the NSR formalism with the Wilsonian approach. We compare our findings with the recent experiments by Harikoshi et al. [Science 327, 442 (2010)] and Nascimbene et al. [Nature (London) 463, 1057 (2010)], and find very good agreement. We also make predictions for the population-imbalanced case, which can be tested in experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of phosphorus-related point defects in silica fiber preforms

We report an experimental study on phosphorus-related point defects in amorphous silica, based on photoluminescence, absorption, and electron spin resonance measurements carried out on P-doped SiO{sub 2} fiber preforms. By photoluminescence measurements excited by laser or synchrotron light we detect an emission band peaked at 3.0 eV with a lifetime in the range of ms. The excitation spectrum of the 3.0 eV emission consists of two transitions peaked at 4.8 and 6.4 eV, the former giving rise also to a measurable absorption band. We attribute this optical activity to a P-related point defect embedded in SiO{sub 2}, based on the spatial correlation between the emission intensity and the P doping level. A detailed spectroscopical investigation allows us to propose a scheme of the electronic levels of this P-related defect, in which the 4.8 and 6.4 eV excitation channels arise from transitions from the ground to two-excited singlet states, while the long-lived 3.0 eV emission is associated to a spin-forbidden transition from an excited triplet to the ground state. Finally, electron spin resonance measurements on X-irradiated samples lead us to propose a tentative microscopic model of the defect as a diamagnetic four-coordinated P impurity substitutional to a Si atom.

36 MATERIALS SCIENCE↗

Half-lives and cluster preformation factors for various cluster emissions in trans-lead nuclei

The generalized density-dependent cluster model (GDDCM) is extended to study cluster radioactivity in even-even and odd-A nuclei decaying to the doubly magic nucleus {sup 208}Pb or its neighboring nuclei. The microscopic cluster-daughter potential is numerically constructed in the double-folding model with M3Y nucleon-nucleon interactions plus proton-proton Coulomb interactions. Instead of the WKB barrier penetration probability, the exact solution of the Schroedinger equation with outgoing Coulomb wave boundary conditions is presented. The cluster preformation factor is well taken into account based on some available experimental cases. The calculated half-lives are found to be in good agreement with the experimental data. This indicates that a unified description of {alpha} decay and cluster radioactivity has been achieved by the GDDCM. Predictions of cluster emission half-lives are made for promising emitters, which may guide future experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spectroscopic evidence for preformed Cooper pairs in the pseudogap phase of cuprates.

Angle-resolved photoemission on underdoped La{sub 1.895}Sr{sub 0.105}CuO{sub 4} reveals that in the pseudogap phase, the dispersion has two branches located above and below the Fermi level with a minimum at the Fermi momentum. This is characteristic of the Bogoliubov dispersion in the superconducting state. We also observe that the superconducting and pseudogaps have the same d-wave form with the same amplitude. Our observations provide direct evidence for preformed Cooper pairs, implying that the pseudogap phase is a precursor to superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Investigation of CO2-Responsive Preformed Particle Gel for Conformance Control of CO2 Flooding in Reservoirs With Fractures or Fracture-Like Channels

Summary Gel treatment is an important technique to solve early CO2 breakthrough and excess–CO2–production problems, caused by the low viscosity and low density of CO2, as well as the heterogeneity of reservoirs with fractures or fracture–like channels. However, there is no reported work on gel that increases its volume after reacting with CO2 (termed CO2–responsive gel) for the conformance control of CO2 flooding. In this paper, the intrinsic properties of a CO2–responsive preformed particle gel (CR–PPG) were evaluated in a water/supercritical–CO2 (scCO2) environment in high–pressure vessels. Continuous scCO2 injection and CR–PPG treatment were conducted in fractured sandstone cores, to probe their plugging performance to scCO2 flow in a high–permeability–contrast system. The volumetric swelling ratio (VSR) of the CR–PPG increased by approximately two times in the presence of scCO2, compared with a sample under similar conditions in the absence of scCO2. The CR–PPG swelling ratio decreased with increasing NaCl concentration. Under the same conditions, the temperature did not have an apparent effect on the swelling ratio after 31 days of swelling. In coreflooding experiments, the placed CR–PPG resisted a considerable pressure up to 617.0 psi before breakthrough. After a shut–in process, CO2–breakthrough pressure was detected at 437.2 psi. It is observed that the shut–in process improved the plugging performance of CR–PPG to CO2 as revealed by the increase in the residual resistance factor. Controlling the shut–in time was found to be effective in augmenting the increase in the residual resistance factor, by increasing the VSR of placed CR–PPG. Resistance of CR–PPG to some real field challenges, including a high pressure gradient and long–term exposure to CO2, was also reported for field–applicability concerns.

Engineering↗

An automated process sequence using preformed cell contacts and interconnects with a total cost of $0.64 per peak watt in 1986

A process sequence is described which utilizes a preformed metal mesh electrostatically bonded to each cell to provide the front contact. Cells of 12 percent AM1 efficiency have been produced using this scheme. This method also permits access to both contacts on the cell from the back side. In addition, low cost cell interconnection is accomplished using a flexible 'printed circuit' sheet which is ultrasonically bonded to the cell contacts. The complete process sequence as well as automated equipment which also uses ion implantation and pulse annealing is described. The total cost for module fabrication is estimated at $0.64 per peak watt for a 30 MW/year plant.

Armini, A. J.↗

Preformed Superconductive Devices

Process forms high-temperature superconductors into electrical components as connectors, coils, and conductors. Brittleness no obstacle because material preformed before heated to turn it into ceramic. Substrates made of glass-fiber-reinforced circuit-board material, reduce leakage of heat into ceramic, unlike silver or copper substrates used in making sintered-in-place superconducting ceramics.

Haertling, Gene H.↗

High temperature, flexible, fiber-preform seal

A seal is mounted in a rectangular groove in a movable structural panel. The seal comprises a fiber preform constructed of multiple layers of fiber having a uniaxial core. Helical fibers are wound over the core. The fibers are of materials capable of withstanding high temperatures and are both left-hand and right-hand wound. An outer layer wrapped over said helical fibers prevents abrasion damage.

Steinetz, Bruce M.↗

High-Temperature, Flexible, Fiber-Preform Seals

High-temperature, flexible, fiber-preform seal includes axial core and helical windings, and abrasion-resistant sheath. Seals tailored to service in variety of environments. Used between movable and stationary panels in advanced aircraft engines or to seal gaps of high-temperature furnaces.

Steinetz, Bruce M.↗

Development of generalized 3-D braiding machines for composite preforms

The development of prototype braiding machines for the production of generalized braid patterns is described. Mechanical operating principles and control strategies are presented for two prototype machines which have been fabricated and evaluated. Both machines represent advances over current fabrication techniques for composite materials by enabling nearly ideal control of fiber orientations within preform structures. They permit optimum design of parts that might be subjected to complex loads or that have complex forms. Further, they overcome both the lack of general control of produced fiber architectures and the complexity of other weaving processes that have been proposed for the same purpose. One prototype, the Farley braider, consists of an array of turntables that can be made to oscillate in 90 degree steps. Yarn ends are transported about the surface formed by the turntables by motorized tractors which are controlled through an optical link with the turntables and powered through electrical contact with the turntables. The necessary relative motions are produced by a series of linear tractor moves combined with a series of turntable rotations. As the tractors move about, they weave the yarn ends into the desired pattern. The second device, the shuttle plate braider, consists of a braiding surface formed by an array of stationary square sections, each separated from its neighbors by a gap. A plate beneath this surface is caused to reciprocate in two perpendicular directions, first in one direction and then in the other. This movement is made possibly by openings in the plate that clear short columns supporting the surface segments. Yarn ends are moved about the surface and interwoven by shuttles which engage the reciprocating plate as needed to yield the desired movements. Power and control signals are transmitted to the shuttles through electrical contact with the braiding surface. The shuttle plate is a passively driven prime mover that supplies the power to move all shuttles and the shuttles are simple devices that employ only a solenoid to engage the shuttle plate on command. Each shuttle is assigned a unique identity and is controlled independently. When compared to each other, the Farley braider is felt to have the advantage of speed and the shuttle plate braider, the advantage of simplicity.

Huey, Cecil O., Jr.↗

Development of generalized 3-D braiding machines for composite preforms

The operating principles of two prototype braiding machines for the production of generalized braid patterns are described. Both processes afford previously unachievable control of the interlacing of fibers within a textile structure that make them especially amenable to the fabrication of textile preforms for composite materials. They enable independent control of the motion of the individual fibers being woven, thereby enabling the greatest possible freedom in controlling fiber orientation within a structure. This freedom enables the designer to prescribe local fiber orientation to better optimize material performance. The processes have been implemented on a very small scale but at a level that demonstrates their practicality and the soundness of the principles governing their operation.

Huey, Cecil O., Jr.↗

Development of a low-cost, modified resin transfer molding process using elastomeric tooling and automated preform fabrication

This paper describes the design and process development of low-cost structural parts made by a modified resin transfer molding process. Innovative application of elastomeric tooling to increase laminate fiber volume and automated forming of fiber preforms are discussed, as applied to fabrication of a representative section of a cruise missile fuselage.

Doane, William J.↗

Design of fabric preforms for double diaphragm forming

Resin Transfer Molding (RTM) has the potential of becoming one of the most cost effective ways of producing composite structures since the raw materials used, resin and dry fabric, are less costly than prepregs. Unfortunately these low material costs are offset by the high labor costs incurred to layup the dry fabric into 3D shapes. To reduce the layup costs, double diaphragm forming is being investigated as a potential technique for creating a complex 3D preform from a simple flat layup. As part of our effort to develop double diaphragm forming into a production capable process, we have undertaken a series of experiments to investigate the interactions between process parameters, mold geometry, fabric weave, tow size, and the quality of the formed part. The results of these tests will be used to determine the forming geometry limitations of double diaphragm forming and to characterize the formability of fabric configurations. An important part of this work was the development of methods to measure and analyze fiber orientations, deformation angles, tow spreading, and shape conformation of the formed parts. This paper will describe the methods used to mark plies, the double diaphragm forming process, the techniques used to measure the formed parts, and the calculation of the parameters of interest. The results can be displayed as 3D contour plots. These experimental results have also been used to verify and improve a computer model which simulates the draping of fabrics over 3D mold shapes.

Luby, Steven↗