Search NASA⌕ Search

SEARCH · Search NASA

Results for “stacking sequences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes

Despite the high energy density of lithium-rich layered-oxide electrodes, their real-world implementation in batteries is hindered by the substantial voltage decay on cycling. This voltage decay is widely accepted to mainly originate from progressive structural rearrangements involving irreversible transition-metal migration. As prevention of this spontaneous cation migration has proven difficult, a paradigm shift toward management of its reversibility is needed. Herein, we demonstrate that the reversibility of the cation migration of lithium-rich nickel manganese oxides can be remarkably improved by altering the oxygen stacking sequences in the layered structure and thereby dramatically reducing the voltage decay. The preeminent intra-cycle reversibility of the cation migration is experimentally visualized, and first-principles calculations reveal that an O2-type structure restricts the movements of transition metals within the Li layer, which effectively streamlines the returning migration path of the transition metals. Furthermore, we propose that the enhanced reversibility mitigates the asymmetry of the anionic redox in conventional lithium-rich electrodes, promoting the high-potential anionic reduction, thereby reducing the subsequent voltage hysteresis. Our findings demonstrate that regulating the reversibility of the cation migration is a practical strategy to reduce voltage decay and hysteresis in lithium-rich layered materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Polytypism in few-layer gallium selenide

Different stacking sequences due to polytypism in 2-dimensional few-layer GaSe were identified by Raman spectroscopy, HR-S/TEM, and theoretical calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Optoelectronic and structural characterization of trapezoidal defects in 4H-SiC epilayers and the effect on MOSFET reliability

To this day, trapezoidal defects are found in clusters and high counts in wafers representing the industry standard in terms of material quality being produced. This study sheds light on the nature, origin, behavior, and impact of this defect on device yield and reliability. Trapezoidal defects in 4H-SiC epitaxial layers were investigated by photoluminescence (PL) imaging, scanning electron microscopy (SEM), cathodoluminescence spectrum imaging (CLSI), SEM electron beam induced current (EBIC) imaging, and by transmission electron microscopy (TEM) observation. The bar-shaped stacking faults were identified by the PL and CL measurements with a peak emission wavelength of 420 and 450 nm. An optoelectronic behavioral study based on the recombination enhanced dislocation glide mechanism revealed how expanding dislocations and stacking faults interact with each other. Combining the luminescence and microscopy results, the nature of the stacking faults was identified as being a combination of Shockley-type and Frank-type stacking faults. The TEM analysis showed that these defects originate from the substrate and the stacking sequences of some of the faults were determined as (…2, 4, 2…) and (…2, 3, 2…) in the Zhdanov's notation by high-resolution TEM. The origin of this defect is speculated based on our results and previous reports. The EBIC imaging showed that the high density of SFs in these towers is a strong site of carrier recombination, which presumably has an impact on the transfer characteristics of SiC devices. Furthermore, these defects have shown to impact metal oxide semiconductor field effect transistors electrical performance via an increase in the on-state resistance depending on the coverage percentage of the tower of defects in the active area of the device.

4H-SiC↗
DOE OSTI2023

Chirality reversal of magnetic solitons in chiral Cr 1/3 TaS 2

Ferromagnetism in two-dimensional (2D) materials provides an ideal platform to study emergent electromagnetic phenomena in low dimensions for future spintronics. In magnetic-element intercalated transition metal dichalcogenides, topologically nontrivial spin textures, such as chiral helimagnetic spin states and chiral soliton lattices, are realized due to the chiral lattice distortions induced by intercalated magnetic ions. Consequently, the magnetic chirality is predictably determined by the sign of antisymmetric exchange interaction (or Dzyaloshinskii–Moriya interaction, DMI) vector that is coupled to the underlying crystal chirality. Here, using cryogenic Lorentz phase microscopy, we directly observed the chirality reversal behavior of the chiral soliton lattices in Cr 1/3 TaS 2 across the structural defects. We show that a partial 1 T stacking in 2H-TaS 2 locally reduces DMI, leading to magnetic chirality reversal with direct atomic resolution imaging. Furthermore, our experimental results show that manipulation of stacking sequence provides a viable way to control the chirality of topologically nontrivial soliton lattices in 2D magnets.

2D materials↗
DOE OSTI2022

Atomic structure and Mott nature of the insulating charge density wave phase of 1T-TaS 2

Here, using x-ray pair distribution function (PDF) analysis and computer modeling, we explore structure models for the complex charge density wave (CDW) phases of layered 1T-TaS 2 that both well capture their atomic-level features and are amenable to electronic structure calculations. The models give the most probable position of constituent atoms in terms of 3D repetitive unit cells comprising a minimum number of Ta–S layers. Structure modeling results confirm the emergence of star-of-David (SD) like clusters of Ta atoms in the high-temperature incommensurate (IC) CDW phase and show that, contrary to the suggestions of recent studies, the low-temperature commensurate (C) CDW phase expands upon cooling thus reducing lattice strain. The C-CDW phase is also found to preserve the stacking sequence of Ta–S layers found in the room temperature, nearly commensurate (NC) CDW phase to a large extent. DFT based on the PDF refined model shows that bulk C-CDW 1T-TaS 2 also preserves the insulating state of individual layers of SD clusters, favoring the Mott physics description of the metal-to-insulator (NC-CDW to C-CDW) phase transition in 1T-TaS 2 . Our work highlights the importance of using precise crystal structure models in determining the nature of electronic phases in complex materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Persistent short-range spin fluctuation in rare-earth substituted square lattice Sr 2 ⁢Ir 0.89 ⁢Tb 0.11⁢ O 4

Sr 2 ⁢IrO 4 , a prototypical 𝐽 eff = 1/2 square lattice system, is widely studied for novel physics. While transition metal substitution effects are well explored, rare-earth doping at the Ir 4+ site is less explored. Here we present a detailed magnetization and neutron diffraction study on Sr 2 ⁢Ir 1−𝑥 ⁢Tb 𝑥 ⁢O 4 (𝑥 = 0.11). The system tends to adopt an in-plane antiferromagnetic configuration with a “++++” stacking sequence. Strong spin fluctuations persist down to the lowest measured temperature, consistent with the concave shape order parameter. A pronounced magnetic diffuse scattering rod develops along the 𝐿 direction at low temperature, indicating the formation of short-range magnetic correlations with a characteristic length of ∼ 24⁢(2) ⁢Å. In conclusion, this work provides a new pathway to exotic quantum phases in the strongly spin-orbit-coupled iridates.

Iridates↗
DOE OSTI2021

Effect of surface steps on chemical ordering in the subsurface of Cu(Au) solid solutions

Atomic steps are typically assumed to only influence surface phenomena of solids. In contrast, in this paper we show, using in-situ atomic-resolution electron microscopy observations and atomistic modeling, the pronounced effect from surface stepsin inducing compositional and structural evolution in the subsurface of a Cu(Au) solid solution. We find that Au surface segregation results in a stacked sequence of Cu-Au ordered phases in the subsurface. The presence of a monatomic step at the surface induces the formation of an anti-phase boundary that extends from the surface step to deeper layers by maintaining the same composition profile associated with each terrace. The bunching of surface steps induces chemical disordering of the Cu-Au ordered phases in the subsurface region of the bunched steps. These results demonstrate the instant propagation of surface dynamics of atomic steps into the subsurface region and can find broader applicability in utilizing surface defects to tune the composition and structure in the subsurface of alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Local structure memory effects in the polar and nonpolar phases of MoTe 2

We use total scattering to study the reversible transition between the polar 1T' and nonpolar T d phases of layered MoTe 2 taking place at 240 K. Whereas, macroscopically, the transition appears to be first order, locally, it is not. In particular, a great deal of the stacking sequence of Te-Mo-Te layers characteristic of the polar 1T' phase persists locally in the nonpolar T d phase, and vice versa, over a broad temperature range extending about 100 K both below and above the transition. The intermixing ratio for the two sequences evolves gradually across the transition temperature, consistent with a second-order transition behavior. Here, the presence of coexisting local polar and nonpolar regions and the resulting variety of internal interfaces where the spatial inversion symmetry is broken may be behind some of the unusual electronic properties of T d –MoTe 2 , including its putative type-II Weyl semimetal state.

2-dimensional systems↗
DOE OSTI2023

Structures of elemental potassium at terapascal pressures

Here we investigate the pressure-temperature phase diagram of elemental potassium (K) up to multiterapascal (TPa) pressures using ab initio random structure searching (AIRSS), discovering eight structural phase transitions beyond the already known double hexagonal close-packed (dhcp) structure. Starting at 1.15 TPa, K transitions from the dhcp structure and passes through a variety of close-packed hexagonal and trigonal phases (dhcp → P6 3 /mmc → P3m1 → P$\bar{6}m2$), which differ only in their stacking sequence along the c axis. At 2.55 TPa, K adopts the hexagonal close-packed (hcp) structure, and at 7.21 TPa transitions into a complex orthorhombic phase of Fddd symmetry with 64 atoms in its (conventional) unit cell, before assuming an Ibam structure at 8.60 TPa, and, eventually, the face centered cubic (fcc) structure at 23.6 TPa, which persists well into the petapascal (PPa) regime. Further, we calculate the full pressure-temperature dependence of the melting line of K through extensive molecular dynamics simulations. We study the evolution of the bonding topology of K with pressure, finding that K passes through two quasi-molecular phases featuring diatomic pairs (the Fddd and Ibam structures), before ultimately becoming a high pressure electride (HPE) in the fcc phase. The electron-phonon and superconducting properties of K at these extreme pressures are also investigated, where we find the critical temperature T c rises to a maximum of between 7.65 K and 15.70 K in the hcp phase, before eventually decreasing to essentially zero in the fcc phase. Our results fully elucidate the structural and electronic behavior of K under the most extreme conditions, and provide new case studies for multi-TPa dynamic compression experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Perspective–The Elusive Quantum Anomalous Hall Effect in MnBi 2 Te 4 : Materials

Observation of the quantum anomalous Hall effect (QAHE) in MnBi 2 Te 4 flakes is one of the most exciting results in the study of the intrinsic magnetic topological insulator MnBi 2 Te 4 and related compounds. However, reproducing this fascinating result has been found to be challenging. The quality of starting MnBi 2 Te 4 single crystals is believed to be the key factor. An interesting and important question to address is what is the right quality to enable the QAHE. In this perspective, we present possible approaches to tuning the magnetic and topological properties of MnBi 2 Te 4 by using lattice imperfections, strain, stacking sequence, and interactions between the substrate and flakes/films. It is of critical importance to eventually identify the factor(s) responsible for the realization of QAHE. This paper is part of the JES/JSS Joint Focus Issue In Honor of John Goodenough: A Centenarian Milestone.

36 MATERIALS SCIENCE↗
DOE OSTI2026

HYBRID COMPOSITES VIA CO-EXTRUSION ADDITIVE MANUFACTURING-COMPRESSION MOLDING FOR PERFORMANCE OPTIMIZATION

The growing demand for hybrid polymer composites with multifunctional properties has led to the development of various hybridization techniques, such as multi-material compounding and controlled laminate stacking sequence. In this study, a novel hybrid manufacturing approach was used by integrating a multiplexing extrusion system (MExS) based on additive manufacturing with subsequent compression molding process. This technique enabled the co-extrusion of different materials during the additive manufacturing process to fabricate composites with tailored performance. The developed hybrid composite featured a skin layer of glass fiberreinforced polycarbonate (PC/GF) encapsulating a carbon fiber-reinforced acrylonitrile butadiene styrene (CF/ABS) core. The structure was engineered to promote improved thermal and impact resistance at the surface, supported by a stiff core for enhanced overall mechanical integrity. Mechanical, thermal and morphological properties of the hybrid composites were investigated to understand trade-offs in performance compared to a single-material system. The results demonstrate that this approach enables the production of multifunctional composites suitable for applications such as automotive body panels and protective housings, where a balance of weight, mechanical strength, and thermal performance is essential.

Wasti, Sanjita [ORNL]↗
NASA NTRS1972

Vibration and damping of laminated, composite-material plates including thickness-shear effects

An analytical investigation of sinusoidally forced vibration of laminated, anisotropic plates including bending-stretching coupling, thickness-shear flexibility, all three types of inertia effects, and material damping is presented. In the analysis the effects of thickness-shear deformation are considered by the use of a shear correction factor K, analogous to that used by Mindlin for homogeneous plates. Two entirely different approaches for calculating the thickness-shear factor for a laminate are presented. Numerical examples indicate that the value of K depends on the layer properties and the stacking sequence of the laminate.

Bert, C. W.↗
NASA NTRS1971

Distribution of mica polytypes among space groups.

All the possible space groups for mica polytypes are deduced by making use of the characteristics of the mica unit layer and stacking mode. The algebraic properties of the vector-stacking symbol of Ross et al. (1966) are examined, and a simple algorithm for deducing the space group from this symbol is presented. A method considered for enumerating all possible stacking sequences of mica polytypes makes use of a computer.

Takeda, H.↗
NASA NTRS1976

Symmetries in laminated composite plates

The different types of symmetry exhibited by laminated anisotropic fibrous composite plates are identified and contrasted with the symmetries of isotropic and homogeneous orthotropic plates. The effects of variations in the fiber orientation and the stacking sequence of the layers on the symmetries exhibited by composite plates are discussed. Both the linear and geometrically nonlinear responses of the plates are considered. A simple procedure is presented for exploiting the symmetries in the finite element analysis. Examples are given of square, skew and polygonal plates where use of symmetry concepts can significantly reduce the scope and cost of analysis.

Noor, A. K.↗
NASA NTRS1976

On thermal edge effects in composite laminates

Results are presented for a finite-element investigation of the combined influence of edge effects due to mechanical and thermal mismatch in composite laminates with free edges. Laminates of unidirectional boron/epoxy symmetrically bonded to sheets of aluminum and titanium were studied. It is shown that interlaminar thermal stresses may be more significant than the interlaminar stresses due to loading only. In addition, the stresses due to thermal mismatch may be of the same sign as those due to Poisson's mismatch or they may be of opposite sign depending upon material properties, stacking sequence, and direction of loading. The paper concludes with a brief discussion of thermal stresses in all-composite laminates.

Herakovich, C. T.↗
NASA NTRS1977

Two-dimensional hygrothermal diffusions into a finite width composite laminate

Two dimensional hygroscopic diffusion into composite laminates with free edges was obtained through the use of a second order finite difference scheme. A computer program was developed for the transient nonlinear coupled hygrothermal diffusion into finite width laminates with varying surface conditions along two edges. The formulation permits the diffusion coefficient to be a function of temperature, moisture concentration, and fiber orientation. The moisture distributions thus obtained are necessary for analysis of the moisture induced interlaminar stresses in the vicinity of free edges. It is shown that large diffusion times tend to eliminate the significance of stacking sequence, but gradients within and between layers are significant for all diffusion times.

Farley, G. L.↗