Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Deep learning insights into cosmological structure formation

The evolution of linear initial conditions present in the early Universe into extended halos of dark matter at late times can be computed using cosmological simulations. However, a theoretical understanding of this complex process remains elusive; in particular, the role of anisotropic information in the initial conditions in establishing the final mass of dark matter halos remains a long-standing puzzle. Here, we build a deep learning framework to investigate this question. We train a three-dimensional convolutional neural network to predict the mass of dark matter halos from the initial conditions, and quantify in full generality the amounts of information in the isotropic and anisotropic aspects of the initial density field about final halo masses. We find that anisotropies add a small, albeit statistically significant amount of information over that contained within spherical averages of the density field about final halo mass. However, the overall scatter in the final mass predictions does not change qualitatively with this additional information, only decreasing from 0.9 dex to 0.7 dex. Given such a small improvement, our results demonstrate that isotropic aspects of the initial density field essentially saturate the relevant information about final halo mass. Therefore, instead of searching for information directly encoded in initial conditions anisotropies, a more promising route to accurate, fast halo mass predictions is to add approximate dynamical information based e.g. on perturbation theory. More broadly, our results indicate that deep learning frameworks can provide a powerful tool for extracting physical insight into cosmological structure formation. Published by the American Physical Society 2024

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cosmological perturbations and structure formation in nonlocal infrared modifications of general relativity

We study the cosmological consequences of a recently proposed nonlocal modification of general relativity, obtained by adding a term m{sup 2}R □{sup −2}R to the Einstein-Hilbert action. The model has the same number of parameters as ΛCDM, with m replacing Ω{sub Λ}. At the background level, after fixing m so to reproduce the observed value of Ω{sub M}, we get a pure prediction for the equation of state of dark energy as a function of redshift, w{sub DE}(z), with w{sub DE}(0) in the range [−1.165,−1.135] as Ω{sub M} varies over the broad range Ω{sub M} element of [0.20,0.36]. We find that the cosmological perturbations are well-behaved, and the model fully fixes the dark energy perturbations as a function of redshift z and wavenumber k. The nonlocal model provides a good fit to supernova data and predicts deviations from General Relativity in structure formation and in weak lensing at the level of 3-4%, therefore consistent with existing data but readily detectable by future surveys. For the logarithmic growth factor we obtain γ ≅ 0.53, to be compared with γ ≅ 0.55 in ΛCDM. For the Newtonian potential on subhorizon scales our results are well fitted by Ψ(a;k) = [1+μ{sub s}a{sup s}]Ψ{sub GR}(a;k) with a scale-independent μ{sub s} ≅ 0.09 and s ≅ 2, while the anisotropic stress is negligibly small.

79 ASTRONOMY AND ASTROPHYSICS↗

The Atacama Cosmology Telescope DR6 and DESI: structure formation over cosmic time with a measurement of the cross-correlation of CMB lensing and luminous red galaxies

We present a high-significance cross-correlation of CMB lensing maps from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) with luminous red galaxies (LRGs) from the Dark Energy Spectroscopic Instrument (DESI) Legacy Survey spectroscopically calibrated by DESI. We detect this cross-correlation at a significance of 38σ; combining our measurement with the Planck Public Release 4 (PR4) lensing map, we detect the cross-correlation at 50σ. Fitting this jointly with the galaxy auto-correlation power spectrum to break the galaxy bias degeneracy with σ 8 , we perform a tomographic analysis in four LRG redshift bins spanning 0.4 ≤ z ≤ 1.0 to constrain the amplitude of matter density fluctuations through the parameter combination S 8 × = σ 8 (Ω m / 0.3) 0.4 . Prior to unblinding, we confirm with extragalactic simulations that foreground biases are negligible and carry out a comprehensive suite of null and consistency tests. Using a hybrid effective field theory (HEFT) model that allows scales as small as k max = 0.6 h/ Mpc, we obtain a 3.3% constraint on S 8 × = σ 8 (Ω m / 0.3) 0.4 = 0.792 +0.024 -0.028 from ACT data, as well as constraints on S 8 × (z) that probe structure formation over cosmic time. Our result is consistent with the early-universe extrapolation from primary CMB anisotropies measured by Planck PR4 within 1.2σ. Jointly fitting ACT and Planck lensing cross-correlations we obtain a 2.7% constraint of S 8 × = 0.776 +0.019 -0.021 , which is consistent with the Planck early-universe extrapolation within 2.1σ, with the lowest redshift bin showing the largest difference in mean. The latter may motivate further CMB lensing tomography analyses at z < 0.6 to assess the impact of potential systematics or the consistency of the ΛCDM model over cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

Gate‐Voltage Control of Borophene Structure Formation

Abstract Boron nanostructures are easily charged but how charge carriers affect their structural stability is unknown. We combined cluster expansion methods with first‐principles calculations to analyze the dependence of the preferred structure of two‐dimensional (2D) boron, or “borophene”, on charge doping controlled by a gate voltage. At a reasonable doping level of 3.12×10 14 cm −2 , the hollow hexagon concentration in the ground state of 2D boron increases to 1/7 from 1/8 in its charge‐neutral state. The numerical result for the dependence of hollow hexagon concentration on the doping level is well described by an analytical method based on an electron‐counting rule. Aside from in‐plane electronic bonding, the hybridization among out‐of‐plane boron orbitals is crucial for determining the relative stability of different sheets at a given doping level. Our results offer new insight into the stability mechanism of 2D boron and open new ways for the control of the lattice structure during formation.

Zhang, Zhuhua↗

Formation, Structure and Properties of Amorphous Carbon Char from Polymer Materials in Extreme Atmospheric Reentry Environments

Amorphous carbonaceous char produced from the pyrolysis of polymer solids has many desirable properties for ablative heat shields for space vehicles. Molecular dynamics simulations are presented to study the transformation of the local atomic structure from virgin polymer to a dense, disordered char [1]. Release of polymer hydrogen is found to be critical to allow the system to collapse into a highly coordinated char structure. Mechanisms of the char formation process and the morphology of the resulting structures are elucidated. Thermal conductivity and mechanical response of the resulting char are evaluated [2]. During reenty, the optical response and oxidative reactivity of char are also important properties. Results of ab initio computations of char optical functions [3] and char reactivity [4] are also presented.

Lawson, John W.↗

Formation, structure, and thermal stability evolution of ternesite based on a single-stage sintering process

Highlights: • The synthesis of high-purity ternesite based on a single-stage sintering process was firstly studied. • The formation mechanism and crystallization behaviour of ternesite during sintering were investigated. • The structure perfection and symmetry of ternesite crystals were increased with its growth. • The growth and structural development of ternesite crystals during sintering resulted in a higher thermal stability of itself. Ternesite was prepared via a single-stage solid-state reaction from stoichiometric quantities of the CaCO{sub 3}, SiO{sub 2} and CaSO{sub 4}·2H{sub 2}O precursors. In this paper, the formation, structure, and thermal stability evolution of ternesite during sintering were investigated ex situ after quenching. The optimal sintering temperature for the formation of high-purity ternesite was approximately 1200 °C for 12 h, of which the purity level can reach as high as 96.3%. The results from scanning electron microscopy analysis suggest that the formation of ternesite benefited from the preformation of the intermediate silicate phase. Increasing the sintering temperature from 1100 °C to approximately 1250 °C was favourable for the growth of ternesite crystals, and a prolonged duration can also promote this behaviour. The structural perfection and symmetry of ternesite crystals increased with its growth, which was demonstrated by a multimethod approach. By means of thermal analysis, the growth and structural development of ternesite crystals during sintering eventually resulted in a higher thermal stability.

36 MATERIALS SCIENCE↗

Model Development in MARMOT for High Burn-up Structure Formation

A phase field model for the formation of High Burn-up Structure (HBS) was developed and implemented in MARMOT. The model takes into consideration the chemical energy of gas atoms, interfacial energies of grain boundaries and bubble surfaces, and strain energy associated with dislocations, which renders the model capable of simulating the concurrent formation and growth of both bubbles and sub-grains. Moreover, in contrast to existing phase-field models of recrystallization, the current model makes no ad hoc or a priori assumptions for the nucleation rate or recrystallized grain size and shape. All the model parameters were quantified in terms of thermodynamic and kinetic properties. The model predicts a strong effect of magnitude and distribution of dislocation density, grain boundary energy, and bubble surface energy on the formation of sub-grains. The model results were shown to agree well with theoretical predictions. For polycrystalline UO 2 at 1200K, the recrystallized average grain size was found to be on the order of of 0.6-1.3 microns at a burn-up in the range of 98-105 GWD/tU. These values lie well within the range of reported data in literature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of solidification accelerators on structure formation of anhydrite-containing binders

The article presents results of scientific analysis of chemical additives influence on acid fluoride binder. It was found that the influence of sulfate nature additives on the process of hydration and solidification of the binder is similar to influence of additives on indissoluble anhydrite. Additives with SO{sub 4}{sup 2−} anion NO{sup −} are more efficient. The mentioned additives according to accelerating effect belong to the following succession: K{sub 2}SO{sub 4} > Na{sub 2}SO{sub 4} > FeSO{sub 4} > MgSO{sub 4}. Facilitation of the process of hydration and solidification of the binder, increase in density and durability of the binder (32 MPa) is to the greatest extent achieved with the introduction of 2% sodium sulfate additive of the binder’s mass into the composition of the binder along with the ultrasonic treatment of water solution. Directed crystal formation process with healing of porous structure by new growths presented as calcium sulfate dehydrate and hydroglauberite provides positive effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure formation by the fifth force: Segregation of baryons and dark matter

In this paper we present the results of N-body simulations with a scalar field coupled differently to cold dark matter (CDM) and baryons. The scalar field potential and coupling function are chosen such that the scalar field acquires a heavy mass in regions with high CDM density and thus behaves like a chameleon. We focus on how the existence of the scalar field affects the formation of nonlinear large-scale structures, and how the different couplings of the scalar field to baryons and CDM particles lead to different distributions and evolutions for these two matter species, both on large scales and inside virialized halos. As expected, the baryon-CDM segregation increases in regions where the fifth force is strong, and little segregation in dense regions. We also introduce an approximation method to identify the virialized halos in coupled scalar field models which takes into account the scalar field coupling and which is easy to implement numerically. It is found that the chameleon nature of the scalar field makes the internal density profiles of halos dependent on the environment in a very nontrivial way.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural formations in the interplanetary medium

Research on the fine structure of the interplanetary medium is reviewed. The characteristics of shock waves, filaments, and contact surfaces according to space probe measurements are discussed.

Bogdanov, A. V.↗

Supramolecular structure formation of Langmuir-Blodgett films of comblike precursor and polyimide

The surface structure of Langmuir-Blodgett films of a comblike polyimide precursor-a rigid-chain polyamic acid alkylamine salt bearing multichains of tertiary amine-and films of the corresponding polyimide were studied by atomic force microscopy (AFM). An analysis of the images of the surface of three-layer films revealed a domain structure. It was found that the Langmuir-Blodgett film formation of the precursor occurs as a result of the layer-by-layer deposition of two-dimensional domains (composed of polyamic acid salt molecules on the water surface) onto a substrate. The formation of domains in a monolayer is associated with the chemical structure of the precursor, to be more precise, with the rigidity of the main chain and the presence of closely spaced aliphatic side chains in the polymer chain, whose total cross-section area is close to the surface area of the projection onto the plane of the repeating unit of the main chain. Polyimide films inherit the domain structure of the precursor films; the inhomogeneity of the film thickness substantially decreases, whereas the domain size and character of their distribution in the film remain unchanged.

36 MATERIALS SCIENCE↗

Shear Pleasure: The Structure, Formation, and Thermodynamics of Crystallographic Shear Phases

A renaissance of interest in crystallographic shear structures and our recent work in this remarkable class of materials inspired this review. We first summarize the geometrical aspects of shear plane formation and possible transformations in ReO 3 , rutile, and perovskite-based structures. Then we provide a mechanistic overview of crystallographic shear formation, plane ordering, and propagation. Next we describe the energetics of planar defect formation and interaction, equilibria between point and extended defect structures, and thermodynamic stability of shear compounds. Finally, we emphasize the remaining challenges and propose future directions in this exciting area.

Materials Science↗

Short-pulse Laser Induced Transient Structure Formation and Ablation Studied with Time-resolved Coherent XUV-scattering

The structural dynamics of short-pulse laser irradiated surfaces and nano-structures has been studied with nm spatial and ultrafast temporal resolution by means of single-shot coherent XUV-scattering techniques. The experiments allowed us to time-resolve the formation of laser-induced periodic surface structures, and to follow the expansion and disintegration of nano-objects during laser ablation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear structure formation in nonlocal gravity

We study the nonlinear growth of structure in nonlocal gravity models with the aid of N-body simulation and the spherical collapse and halo models. We focus on a model in which the inverse-squared of the d'Alembertian operator acts on the Ricci scalar in the action. For fixed cosmological parameters, this model differs from ΛCDM by having a lower late-time expansion rate and an enhanced and time-dependent gravitational strength ∼ 6% larger today). Compared to ΛCDM today, in the nonlocal model, massive haloes are slightly more abundant (by ∼ 10% at M ∼ 10{sup 14} M{sub ⊙}/h) and concentrated ≈ 8% enhancement over a range of mass scales), but their linear bias remains almost unchanged. We find that the Sheth-Tormen formalism describes the mass function and halo bias very well, with little need for recalibration of free parameters. The fitting of the halo concentrations is however essential to ensure the good performance of the halo model on small scales. For k ∼> 1 h/Mpc, the amplitude of the nonlinear matter and velocity divergence power spectra exhibits a modest enhancement of ∼ 12% to 15%, compared to ΛCDM today. This suggests that this model might only be distinguishable from ΛCDM by future observational missions. We point out that the absence of a screening mechanism may lead to tensions with Solar System tests due to local time variations of the gravitational strength, although this is subject to assumptions about the local time evolution of background averaged quantities.

79 ASTRONOMY AND ASTROPHYSICS↗

Specific features of magnetic structure formation in orbitally degenerate BiMnO{sub 3} manganite

The orbital structure and magnetic ordering of the Jahn-Teller multiferroic BiMnO{sub 3} manganite have been theoretically studied. It is shown that the orbital structure depends not only on the nearest-neighbor oxygen environment of manganese ions, but also on their next-to-nearest neighbors. The orbital structure significantly influences the magnetic order that forms as a result of competition between ferromagnetic and antiferromagnetic exchange interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation, structure, and orientation of gold silicide on gold surfaces

The formation of gold silicide on Au films evaporated onto Si(111) surfaces is studied by Auger electron spectroscopy (AES) and low-energy electron diffraction (LEED). Surface condition, film thickness, deposition temperature, annealing temperature, and heating rate during annealing are varied. Several oriented crystalline silicide layers are observed.

Green, A. K.↗

Galaxy bias and non-linear structure formation in general relativity

Length scales probed by the large scale structure surveys are becoming closer and closer to the horizon scale. Further, it has been recently understood that non-Gaussianity in the initial conditions could show up in a scale dependence of the bias of galaxies at the largest possible distances. It is therefore important to take General Relativistic effects into account. Here we provide a General Relativistic generalization of the bias that is valid both for Gaussian and for non-Gaussian initial conditions. The collapse of objects happens on very small scales, while long-wavelength modes are always in the quasi linear regime. Around every small collapsing region, it is therefore possible to find a reference frame that is valid for arbitrary times and where the space time is almost flat: the Fermi frame. Here the Newtonian approximation is applicable and the equations of motion are the ones of the standard N-body codes. The effects of long-wavelength modes are encoded in the mapping from the cosmological frame to the local Fermi frame. At the level of the linear bias, the effect of the long-wavelength modes on the dynamics of the short scales is all encoded in the local curvature of the Universe, which allows us to define a General Relativistic generalization of the bias in the standard Newtonian setting. We show that the bias due to this effect goes to zero as the square of the ratio between the physical wavenumber and the Hubble scale for modes longer than the horizon, confirming the intuitive picture that modes longer than the horizon do not have any dynamical effect. On the other hand, the bias due to non-Gaussianities does not need to vanish for modes longer than the Hubble scale, and for non-Gaussianities of the local kind it goes to a constant. As a further application of our setup, we show that it is not necessary to perform large N-body simulations to extract information about long-wavelength modes: N-body simulations can be done on small scales and long-wavelength modes are encoded simply by adding curvature to the simulation, as well as rescaling the time and the scale.

79 ASTRONOMY AND ASTROPHYSICS↗