Search NASA⌕ Search

SEARCH · Search NASA

Results for “synchrotron light source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

Four different compositionally complex multicomponent M 3 O 4 spinels containing 5–8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe 2 O 4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. Finally, the improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.

25 ENERGY STORAGE↗
DOE OSTI2026

Coupling Redox Compensation and Interfacial Stabilization in Low-Ni O3-Type Sodium Layered Oxide Cathodes

Low-Ni O3-type sodium layered oxides are attractive cathodes for cost-robust sodium-ion batteries, yet high-voltage cycling is often limited by Fe-driven degradation, including cation migration/dissolution, irreversible slab gliding with large strain, particle cracking, and accelerated interfacial parasitic reactions. Here, in this study, we introduce a redox-interface codesign strategy using stoichiometric, charge-balanced Cu 2+ /Ti 4+ cosubstitution while preserving full Na stoichiometry, transitioning from NaNi 1/4 Fe 1/2 Mn 1/4 O 2 to NaNi 1/4 Fe 1/5 Mn 1/4 Cu 3/20 Ti 3/20 O 2 . With the cosubstitution, Cu and Ti suppress Fe migration and dissolution and facilitate sustained Fe oxidation at high voltage. Meanwhile, Cu is also shown to be redox-active, providing reversible cationic charge compensation that mitigates the capacity penalty typically associated with reducing Fe participation. Operando diffraction and spectroscopy collectively indicate a more reversible high-voltage structural evolution with suppressed Fe-related irreversibility. Particularly, spontaneous Ti enrichment at surface/grain-boundary regions stabilizes the cathode−electrolyte interface and promotes a more NaF-rich interphase signature. This work establishes a generalizable route to reconcile stability and capacity in low-Ni, Fe-containing O3 sodium layered oxide cathodes via compositionally encoded bulk-interfacial coupling.

25 ENERGY STORAGE↗
DOE OSTI2026

Learning neural representations for X-ray ptychography reconstruction with unknown probes

X-ray ptychography provides exceptional nanoscale resolution and is widely applied in materials science, biology, and nanotechnology. However, its full potential is constrained by the critical challenge of accurately reconstructing images when the illuminating probe is unknown. Conventional iterative methods and deep learning approaches are often suboptimal, particularly under the low-signal conditions inherent to low-dose and high-speed experiments. These limitations compromise reconstruction fidelity and restrict the broader adoption of the technique. In this work, we introduce the Ptychographic Implicit Neural Representation (PtyINR), a self-supervised framework that simultaneously addresses the object- and probe-recovery problem. By parameterizing both as continuous neural representations, PtyINR performs end-to-end reconstruction directly from raw diffraction patterns without requiring any pre-characterization of the probe. Extensive evaluations demonstrate that PtyINR achieves superior reconstruction quality on both simulated and experimental data, with remarkable robustness under challenging low-signal conditions. Furthermore, PtyINR offers a generalizable, physics-informed framework for addressing probe-dependent inverse problems, making it applicable to a wide range of computational microscopy problems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscopic strain evolution in single-crystal battery positive electrodes

Single-crystal Ni-rich layered oxides (SC-NMC) with a grain-boundary-free configuration have effectively addressed the long-standing cracking issue of conventional polycrystalline Ni-rich materials (PC-NMC) in lithium-ion batteries, prompting a shift in optimization strategies. However, continued reliance on anisotropic lattice volume change—a well-established failure indicator in PC-NMC—as a metric for understanding strain and guiding compositional design for SC-NMC becomes controversial. Here, in this study, by leveraging multiscale diagnostic techniques, we unravelled the distinct nanoscopic strain evolution in SC-NMC during battery operation, challenging the conventional composition-driven strategies and mechanical degradation indicators used for PC-NMC. Through particle-level chemomechanical analysis, we reveal a decoupling between mechanical stability and lattice volume change in SC-NMC, identifying that structural instability in SC materials is primarily driven by multidimensional lattice distortions induced by kinetics-driven reaction heterogeneity and progressively deactivating chemical phases. Using this mechanical failure mode, we redefine the roles of cobalt and manganese in maintaining mechanical stability. Unlike cobalt’s detrimental role in PC-NMC, we find cobalt to be critical in enhancing the longevity of SC-NMC by mitigating localized strain along the extended diffusion pathway, whereas manganese exacerbates mechanical degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Optimized manufacturing process for multilayer two-dimensional focusing mirrors in laboratory X-ray applications

Recent advances in laboratory X-ray applications require high-performance optical components that achieve exceptional imaging resolution and beam uniformity within compact experimental setups. Montel mirrors have become a preferred solution due to their unique dual-reflection focusing mechanism and a space-efficient design. Here, in this study, we present an effective manufacturing process for producing Montel mirrors tailored to focus laboratory X-ray beams. The mirrors were fabricated from single-crystal silicon substrates, chosen for their high mechanical stability and compatibility with precision polishing techniques. Our approach begins with the integration of a deterministic chemo-mechanical polishing (CMP)-based pre-shaping step followed by ion beam figuring (IBF), significantly improving manufacturing efficiency. Subsequently, our custom-developed advanced metrology and IBF techniques were employed for fabricating an off-axis, elliptical cylinder Montel mirror system with a 6-mrad total slope, with stringent optical specifications. While post-IBF processes, including multilayer coating, dicing, and gluing, introduced minor surface errors, yet their impact on performance remained negligible. The Montel mirrors manufactured with the optimized process exhibited significantly improved beam uniformity and a reduced focal spot size. These findings validate our approach as a viable solution for high-precision Montel mirror fabrication and facilitate further advancements in laboratory X-ray applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reversible Disorder-to-Order Transition Induced by Aqueous Lithiation in Vanadate Electrode Materials

Vanadium-based oxides are intriguing electrode materials in aqueous electrochemical systems owing to their low cost and high theoretical capacity for alkali storage, especially lithium (Li) ions. However, a sequence of phase transformations and irreversible structure distortion upon Li-ion intercalation causes structural instability and has been a lingering problem for vanadium oxide electrodes. Here, in this work, we investigate lithium vanadate (Li–V 3 O 8 ) for aqueous Li-ion intercalation and deintercalation processes. Unlike its crystalline V 2 O 5 polymorph, Li–V 3 O 8 retains monophasic lithiation, which is attributed to its disordered crystalline nature and large interplanar distance. Importantly, we show a unique and reversible sequence of disorder-to-order structural transition induced by the extent of lithiation, which indicates sequential interlayer and intralayer lithiation process, and vice versa in delithiation process, supported by electrokinetic analysis, in situ X-ray diffraction (XRD), and Debye scattering simulations. The absence of distortive phase transitions and multilithiation pathways facilitates Li-ion diffusion across the vanadate electrode materials to improve storage capacity. This work opens a new dimension for vanadium-based disordered oxides, accelerating the development of low-cost, aqueous electrochemical systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Flat band driven itinerant magnetism in the Co-pnictides CaCo 2⁢ As 2 and LaCo 2 ⁢P 2

Flat bands can induce strong electron correlation effects that help stabilize both magnetic and superconducting states. Here, in this study, we carry out angle-resolved photoemission spectroscopy and density functional theory calculations to study the electronic structure of the Co-pnictides CaCo 2 ⁢As 2 and LaCo 2 ⁢P 2 . We find that the 𝑘 𝑧 Fermi topology of ferromagnetic LaCo 2 ⁢P 2 is markedly two-dimensional, while the antiferromagnetic CaCo 2 ⁢As 2 develops a 3D Fermi surface described by a zigzaglike band dispersion perpendicular to the Co-As plane. Furthermore, the magnetism is driven by the electronic correlations of the flat bands with 𝑑 𝑥⁢𝑦 and 𝑑 𝑧 2 orbital character at the Fermi level. Our results link the electronic dimensionality and the magnetic order and emphasize the critical role of the As-As and P-P bond strength along the 𝑐 direction to understand the electronic band structure and the rich phase diagram of transition metal pnictides.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unraveling the origin of air-stability in single-crystalline layered oxide positive electrode materials

Single-crystalline Ni-rich layered oxides present compelling advantages over conventional polycrystalline counterparts toward large-scale applications, including enhanced mechanical stability and higher energy density. Nevertheless, the deleterious effects of air exposure, which is inevitable in industrial processing, on their structure and electrochemical performance remain poorly understood. Herein, we reveal that air exposure is more detrimental to the electrochemical performance of single-crystalline layered oxide positive electrodes than polycrystalline counterparts. It is found that air-induced surface structural distortions are primarily responsible for the electrochemical performance decay of single-crystalline samples rather than the generally believed surface residual lithium. Leveraging multiscale diffraction and imaging techniques, we identify an undesirable structural transition to a metastable O1* phase, which introduces substantial lattice defects and localized strain concentrations within the layered structure. These adverse structural evolutions compromise structural integrity and promote crack initiation during electrochemical cycling, ultimately accelerating capacity fade. Our findings provide critical insights into the air-induced degradation mechanisms and emphasize the urgent need for developing effective stabilization strategies to facilitate the commercial implementation of single-crystalline Ni-rich positive electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Halide segregation to boost all-solid-state lithium-chalcogen batteries

Mixing electroactive materials, solid-state electrolytes, and conductive carbon to fabricate composite electrodes is the most practiced but least understood process in all-solid-state batteries, which strongly dictates interfacial stability and charge transport. Here, we report on universal halide segregation at interfaces across various halogen-containing solid-state electrolytes and a family of high-energy chalcogen cathodes enabled by mechanochemical reaction during ultrahigh-speed mixing. Bulk and interface characterizations by multimodal synchrotron x-ray probes and cryo–transmission electron microscopy show that the in situ segregated lithium halide interfacial layers substantially boost effective ion transport and suppress the volume change of bulk chalcogen cathodes. Various all-solid-state lithium-chalcogen cells demonstrate utilization close to 100% and extraordinary cycling stability at commercial-level areal capacities.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Manganese Oxidation during Vegetation Burning

Redox recycling of manganese (Mn) plays a key role in organic matter decomposition and nutrient cycling in terrestrial vegetated ecosystems, and it is expected to be changed by fires. This study revealed how Mn is oxidized during vegetation burning, by characterizing the chemical speciation of Mn in fire ash from wildland fires and laboratory burning and evaluating the factors governing its average oxidation state (AOS) and speciation. Manganese in wildland fire ash from different ecosystems showed variable AOS that ranges from 2.5 to 3.3. Laboratory burning experiments showed that Mn oxidation was primarily controlled by fire thermal intensity (temperature × duration) and burning completeness. As heating time increased from 5 min to 5 h at 550 and 700 °C, Mn AOS in the lab-burned vegetation ash increased from 2.7 to 4.0 and the oxidation rate was faster at higher temperature. Diverse Mn species can present in wildland fire ash and differ structurally from biogenic Mn oxides. The oxidized Mn species enable fire ash to mediate oxidative degradation of catechol, demonstrating its potential in mediating organic matter decomposition. This study revealed a new paradigm of Mn redox recycling, as compared to the microbe-mediated Mn redox cycling in the absence of fires.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Correlation-driven topological band inversion in VSe 2

Recent spectroscopic studies have uncovered topological surface states and band inversion in 1⁢T−VSe 2 , positioning this material at the intersection of correlated electron physics and nontrivial band topology. While previous interpretations attribute these features to surface strain, the microscopic origin of the topological band structure remains unresolved. Here, we present an alternative explanation based on electronic correlations, showing that a negative effective Hubbard interaction (𝑈 eff < 0) applied to the Se 4p orbitals can reproduce the experimentally observed band inversion at both the Γ and 𝑀 points. Using density functional theory (DFT) calculations with orbital-selective interactions, we demonstrate that this approach naturally gives rise to topological surface states without invoking structural distortions. In conclusion, our results highlight the crucial role of ligand orbital correlations in shaping band topology and provide a novel framework for understanding and engineering topological phases in chalcogenide-based quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Resonant inelastic x-ray scattering in the topological semimetal FeSi

The energy spectrum of topological semimetals contains protected degeneracies in reciprocal space that correspond to Weyl, Dirac, or multifold fermionic states. To exploit the unconventional properties of these states, one has to access the electronic structure of the three-dimensional bulk. In this paper, we present a joint theory-experiment study of the electronic structure of a candidate topological semimetal with resonant inelastic x-ray scattering (RIXS). We resolve the bulk electronic states of FeSi using momentum-dependent RIXS at the Fe L 3 edge. We observe a broad excitation continuum devoid of sharp features, consistent with particle-hole scattering in an underlying electronic band structure. Using density functional theory (DFT), we calculate the electronic structure of FeSi and derive a band theory formulation of RIXS in the fast collision approximation to model the scattering process with zero adjustable parameters. While band theory predicts an excitation continuum with broad spectral features similar to the observed ones, discrepancies between theory and experiment suggest the presence of low-energy processes that DFT alone does not account for. Further, this study of RIXS in a topological semimetal shows that RIXS is a useful tool for revealing unanticipated behavior of bulk electronic states in this class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Dynamics of Thermally Driven Domain Transformation in Ferroelectric Thin Films

An important feature in ultrathin ferroelectric films is the spontaneous formation of nanoscale polarization domain patterns. Epitaxial strain can greatly increase the ferroelectric transition temperature such that films can be in the ferroelectric state during growth. On the other hand, depolarization fields compete with ferroelectricity in ultrathin films, and, consequently, the optimal domain configuration during growth is a moving target. Under these conditions it is readily possible for a grown film to be in a nonequilibrium domain configuration. As the energy landscape in the system is quite complex, the relaxation dynamics by which a system can evolve towards the true equilibrium configuration are also quite interesting. Here, to capture the details of this process we used Bragg-geometry x-ray photon correlation spectroscopy (XPCS), in which x-ray scattering speckle patterns contain the information from the domain arrangements inside the film. With modest heating (∼15⁢0 °C) domain relaxation from 𝑇 (tetragonal) to 𝑀 𝐶 (monoclinic) was observed in BaTiO 3 films grown on ultrathin ferroelectric PbTiO 3 layers. Two-time correlation analysis reveals fascinating details associated with sticking points and reversals in the process.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Five-volt-class high-capacity all-solid-state lithium batteries

Advances in battery technology have been impeded by the voltage constraints of electrolytes. Here, in this study, we present a high-energy all-solid-state battery design featuring >5 V operation and an ultrahigh areal capacity of 35.3 mAh cm −2 ; these attributes were enabled by a highly conductive and ultrahigh-voltage stable fluoride solid electrolyte, LiCl–4Li 2 TiF 6 (1.7 × 10 −5 S cm −1 at 30 °C). LiCl–4Li 2 TiF 6 shields high-voltage spinel oxide cathodes, achieving 106 mAh g −1 at 2C with 75.2% retention over 500 cycles for LiNi 0.5 Mn 1.5 O 4 , sharply contrasting with the conventional LiNbO 3 counterpart, which decomposes and fails to prevent detrimental interfacial degradation. The efficacy of LiCl–4Li 2 TiF 6 is validated across various systems, including LiCoMnO 4 , LiFe 0.5 Mn 1.5 O 4 and pouch-type LiNi 0.5 Mn 1.5 O 4 ||Li (or Ag–C) all-solid-state batteries, and further demonstrated by operability down to 2.3 V with 258 mAh g −1 and ultrathick 1.8-mm electrodes. This shielding layer with >5 V stability introduces a transformative design paradigm by revisiting the previously forbidden high-voltage cathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Revealing key structures for reversible sulfur redox in amorphous polymeric sulfur

Amorphous polymeric sulfur cathodes, such as sulfurized polyacrylonitrile (SPAN), enable high-energy lithium-sulfur batteries without cobalt or nickel, leveraging abundant sulfur. However, the limited in situ understanding of their synthesis and electrochemistry has impeded targeted optimization. Here, in this study, we integrate operando high-energy total scattering with sulfur K-edge X-ray absorption spectroscopy to monitor SPAN's formation and cycling in real time. Our results show that S-C bond formation halts further fusion of cyclized polyacrylonitrile, fostering π-π stacking and a transition from long-chain to short-chain sulfur-critical for reversible sulfur redox. These features synergistically minimize polysulfide dissolution and charge-transfer resistance, enabling optimized SPAN to achieve high capacity retention over 1,000 cycles. Operando X-ray absorption spectroscopy reveals that residual protons drive thiol-thione tautomerism, with lithium replacement during the first discharge causing ~20% irreversible capacity loss. To enhance performance, minimizing -NH groups and expanding pyridine networks are key. These findings transform SPAN optimization from empirical tuning to mechanism‑guided engineering and point the way towards sulfur loadings and energy densities competitive with state‑of‑the‑art Li‑ion cathodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Topological excitonic insulator with tunable momentum order

Correlated topological materials often maintain a delicate balance among physical symmetries. Many topological orders are symmetry protected, whereas most correlated phenomena arise from spontaneous symmetry breaking. Cases where symmetry breaking induces a non-trivial topological phase are rare. Here we demonstrate the presence of two such phases in Ta 2 Pd 3 Te 5 , where Coulomb interactions form excitons that condense below 100 K, one with zero and the other with finite momentum. We observed a full spectral bulk gap, which stems from exciton condensation. This topological excitonic insulator state spontaneously breaks mirror symmetries but involves a weak structural coupling. Scanning tunnelling microscopy shows gapless boundary modes in the bulk insulating phase. Their magnetic field response, together with theoretical modelling, indicates a topological origin. These observations establish Ta 2 Pd 3 Te 5 as a topological excitonic insulator in a three-dimensional crystal. Finally, our results manifest a unique sequence of topological exciton condensations in a bulk crystal, offering exciting opportunities to study critical behaviour and excitations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Exploring a New Regime of Molecular Orbital Physics in 4⁢d Cluster Magnets with Resonant Inelastic X-Ray Scattering

Molecular orbital systems with clusters of heavy transition metal (TM) ions are one of the most important classes of model materials for studying the interplay between local physics and effects of itinerancy. Despite a large number of candidates identified in the family of 4⁢d TM materials, an understanding of their physics from competing microscopic energy scales is still missing. Here, we bridge this gap by reporting the first resonant inelastic x-ray scattering (RIXS) measurement on a well-known series of Ru cluster magnets with a 6⁢H-perovskite structure Ba 3 ⁢M⁢Ru 2 ⁢O 9 (M 3+ = In 3+ , Y 3+ , La 3+ ) comprised of Ru dimers. In addition to providing a microscopic explanation for their anomalous magnetic properties, our RIXS measurements combined with theoretical modeling uncover a new regime of molecular orbital physics where the combined effect of large hopping and small spin-orbit coupling results in highly fragile electronic states in the Ru-dimer compounds directly manifested as an abrupt change in the RIXS spectrum accompanying a tiny change in the local structure tuned by the M-site ion. This unique combination of energy scales found only in the 4⁢d but not the 5⁢d cluster magnets highlights the value of these materials as a new platform for studying quantum phase transition involving molecular orbitals.

36 MATERIALS SCIENCE↗