Search NASA⌕ Search

SEARCH · Search NASA

Results for “tandem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Optimizing energy yield of monolithic perovskite/silicon tandem solar cells in real-world Conditions: The impact of luminescent coupling

Efficient light management is key to maximizing power conversion efficiency (PCE) in monolithic perovskite/silicon tandem solar cells. Achieving peak efficiency requires closely matched current generation in all junctions, especially in integrated configurations. However, real-world conditions vary significantly due to factors such as sunlight spectrum, diffuse-to-direct sunlight ratio, angular distribution of light, subcell temperature coefficients, and ground reflection. This study introduces a comprehensive optical and device simulation to optimize perovskite/silicon tandem cells, considering experimental luminescent coupling (LC) efficiency and its dependence on working conditions, alongside variations in radiative recombination, effect of temperature on absorptivity spectra, and cloud cover. Our results show potential energy yield improvements of up to 1.4 % with LC, based on current perovskite radiative recombination records, and up to 4 % with direct bandgap materials. Although radiative recombination's dependence on excitation intensity reduces output power and requires thicker absorbers, LC compensates for these losses. LC also lowers the optimized bandgap for the perovskite top cell from 1.72 eV to 1.64–1.68 eV, or even lower in regions with redshifted irradiance. Additionally, optimization revealed that thinner silicon bottom cells require a higher perovskite top cell bandgap, impacting the balance between fabrication cost and cell stability.

14 SOLAR ENERGY↗
DOE OSTI2021

Characterization of multiterminal tandem photovoltaic devices and their subcell coupling

Three-terminal (3T) and four-terminal (4T) tandem photovoltaic (PV) devices using various materials have been increasingly reported in the literature, but measurement standards are lacking. Here, multiterminal devices measured as functions of two load variables are characterized unambiguously as functions of three device voltages or currents on hexagonal plots. We demonstrate these measurement techniques using two GaInP/GaAs tandem solar cells, with a middle contact between the two subcells, as example 3T devices with both series-connected and reverse-connected subcells. Coupling mechanisms between the subcells are quantified within the context of a simple equivalent optoelectronic circuit. Electrical and optical coupling mechanisms are most clearly revealed using coupled dark measurements. These measurements are sensitive enough to observe very small luminescent coupling from the bottom subcell to the top subcell in the prototype 3T device. Quick simplified measurement techniques are also discussed within the context of the complete characterization.

14 SOLAR ENERGY↗
DOE OSTI2026

Hole-Transport Layer for High Current Density and Stability of Sn-Pb Perovskites and All-Perovskite Tandem Solar Cells

Sn-Pb perovskites are essential for achieving efficient single-junction solar cells and all-perovskite tandem solar cells (APTSCs). Although Sn oxidation and defective surfaces were once major limitations, recent advances in intrinsic material quality have largely mitigated these issues. As a result, the HTL-related interface is now regarded as the primary bottleneck for device performance. To address the intrinsic drawbacks of PEDOT:PSS, chemical surface modification and additive strategies have been widely applied, and alternative HTLs, like polymeric, inorganic, or small-molecule HTLs, have also gained attention. These approaches offer improved energy-level alignment, high transparency, and enhanced chemical durability, leading to higher short-circuit current density and longer operational lifetime in both single-junction and tandem devices. In this Perspective, we highlight the key criteria and practical effects of HTL materials suitable for Sn-Pb perovskites.

14 SOLAR ENERGY↗
DOE OSTI2021

Prospects for metal halide perovskite-based tandem solar cells

Over the past decade, metal halide perovskite photovoltaics have been a major focus of research, with single-junction perovskite solar cells evolving from an initial power conversion efficiency of 3.8% to reach 25.5%. The broad bandgap tunability of perovskites makes them versatile candidates as the subcell in a tandem photovoltaics architecture. Stacking photovoltaic absorbers with cascaded bandgaps in a multi-junction device can potentially overcome the Shockley–Queisser efficiency limit of 33.7% for single-junction solar cells. There is now intense activity in developing tandem solar cells that pair perovskite with either itself or with a variety of mature photovoltaic technologies such as silicon and Cu(In,Ga)(S,Se) 2 (CIGS). In this review, we survey recent advances in the field and discuss its outlook.

14 SOLAR ENERGY↗
DOE OSTI2022

Regulating surface potential maximizes voltage in all-perovskite tandems

The open circuit voltage (V OC ) deficit in perovskite solar cells (PSCs) is greater in wide bandgap (>1.7 eV) cells than in ~1.5 eV perovskites. Quasi-Fermi level splitting (QFLS) measurements reveal V OC -limiting recombination at the electron transport layer (ETL) contact. This, we find, stems from inhomogeneous surface potential and poor perovskite-ETL energetic alignment. Common monoammonium surface treatments fail to address this; instead we introduce diammonium molecules to modify the perovskite surface states and achieve a more uniform spatial distribution of surface potential. Using 1,3-propane diammonium (PDA), QFLS increases by 90 meV, enabling 1.79 eV PSCs with a certified 1.33 V V OC , and > 19% power conversion efficiency (PCE). Incorporating this layer into a monolithic all-perovskite tandem, we report a record V OC of 2.19 V (89% of the Detailed Balance V OC limit) and > 27% PCE (26.3% certified quasi-steady-state). Furthermore, these tandems retain more than 86% of their initial PCE after 500 hrs operation.

14 SOLAR ENERGY↗
DOE OSTI2020

A molecular tandem cell for efficient solar water splitting

Artificial photosynthesis provides a way to store solar energy in chemical bonds. Achieving water splitting without an applied external potential bias provides the key to artificial photosynthetic devices. We describe here a tandem photoelectrochemical cell design that combines a dye-sensitized photoelectrosynthesis cell (DSPEC) and an organic solar cell (OSC) in a photoanode for water oxidation. When combined with a Pt electrode for H 2 evolution, the electrode becomes part of a combined electrochemical cell for water splitting, 2H 2 O → O 2 + 2H 2 , by increasing the voltage of the photoanode sufficiently to drive bias-free reduction of H + to H 2 . The combined electrode gave a 1.5% solar conversion efficiency for water splitting with no external applied bias, providing a mimic for the tandem cell configuration of PSII in natural photosynthesis. The electrode provided sustained water splitting in the molecular photoelectrode with sustained photocurrent densities of 1.24 mA/cm 2 for 1 h under 1-sun illumination with no applied bias.

14 SOLAR ENERGY↗
DOE OSTI2025

Closing the Accuracy Gap in Tandem Photovoltaic Testing: An Accessible and Efficient Spectral Tuning Method Using LED-Based Simulators for Research Laboratories and Industry

Accurate performance calibration of multijunction (MJ) solar cells is critical for advancing this technology toward large-scale terrestrial application, yet existing testing methods developed by photovoltaics calibration laboratories remain prohibitively complex and resource intensive for most research laboratories. Current approaches rely on expensive multisource simulators and/or intricate spectral tuning algorithms, limiting accessibility and hindering standardized comparisons of emerging MJ technologies such as perovskite-based tandems. This paper introduces a streamlined spectral irradiance adjustment method for light-emitting diode (LED)-based solar simulators, which are increasingly adopted in the photovoltaics community due to their versatility and cost-effectiveness. The method we present bins LED channels into groups based on the number of junctions of the MJ photovoltaic device under test (DUT) and their corresponding band gaps and incorporates an automated tuning algorithm that eliminates the need to adjust each channel’s irradiance individually. This tuning algorithm requires the relative spectral responsivities of both the DUT and a broadband reference cell, as well as a calibrated spectroradiometer. Measurement validation across various MJ devices, including III-V and perovskite/silicon tandems, demonstrates excellent agreement within 1% with well-established xenon-tungsten multisource simulators and associated tuning algorithms. By enabling precise spectral tuning with readily available equipment and a simple tuning algorithm, our approach bridges the measurement accuracy gap between research laboratories and accredited testing facilities, fostering more reliable device comparisons and accelerating the translation of MJ technologies into real-world energy systems.

14 SOLAR ENERGY↗
DOE OSTI2020

Designing an Epitaxially-Integrated DBR for Dislocation Mitigation in Monolithic GaAsP/Si Tandem Solar Cells

This work explores epitaxially-integrated distributed Bragg reflectors (DBR) as a strategy to mitigate the impact of threading dislocations on the performance of monolithic GaAs 0.75 P 0.25 /Si tandem solar cells. The constraints present due to materials availability and the optical transmission profile of the GaAs 0.75 P 0.25 top cell require the use of an enhanced bandwidth DBR design achieved by combining two narrow-band DBR’s with different central wavelengths. Here, the impact of this DBR structure on JSC, along with the competing effects of threading dislocation density (TDD), are investigated using a robust, experimentally informed analytical model. Implementing this DBR within the GaAs 0.75 P 0.25 /Si tandem cell structure is predicted to yield a short circuit current enhancement equivalent to an ~1.8× reduction in TDD, providing a clear demonstration of its promise as a design methodology for mitigating the impact of non-negligible defect populations.

14 SOLAR ENERGY↗
DOE OSTI2021

Fundamentals of Three-Terminal Tandem Solar Cells: a Comprehensive Taxonomy

Three-terminal tandem (3TT) solar cells can overcome some of the limitations of two- and four-terminal tandem designs. However, the coupled nature of the cells adds a degree of complexity to the devices themselves and the ways that their performance can be measured and reported. To facilitate understanding, we have developed a taxonomy which encompasses all types of 3TT devices, enabling a common nomenclature for discussing devices and performance. Once the physical devices, contact nodes, and loading circuitry have been self-consistently described, it becomes apparent that a wide range of 3TT devices share a common set of design and operating principles.

3T↗
DOE OSTI2020

Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems

Wide–band gap metal halide perovskites are promising semiconductors to pair with silicon in tandem solar cells to pursue the goal of achieving power conversion efficiency (PCE) greater than 30% at low cost. However, wide–band gap perovskite solar cells have been fundamentally limited by photoinduced phase segregation and low open-circuit voltage. Here, we report efficient 1.67–electron volt wide–band gap perovskite top cells using triple-halide alloys (chlorine, bromine, iodine) to tailor the band gap and stabilize the semiconductor under illumination. We show a factor of 2 increase in photocarrier lifetime and charge-carrier mobility that resulted from enhancing the solubility of chlorine by replacing some of the iodine with bromine to shrink the lattice parameter. We observed a suppression of light-induced phase segregation in films even at 100-sun illumination intensity and less than 4% degradation in semitransparent top cells after 1000 hours of maximum power point (MPP) operation at 60°C. By integrating these top cells with silicon bottom cells, we achieved a PCE of 27% in two-terminal monolithic tandems with an area of 1 square centimeter.

14 SOLAR ENERGY↗
DOE OSTI2020

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Maximizing the power conversion efficiency (PCE) of perovskite/silicon tandem solar cells that can exceed the Shockley-Queisser single-cell limit requires a high-performing, stable perovskite top cell with a wide bandgap. We developed a stable perovskite solar cell with a bandgap of ~1.7 electron volts that retained more than 80% of its initial PCE of 20.7% after 1000 hours of continuous illumination. Anion engineering of phenethylammonium-based two-dimensional (2D) additives was critical for controlling the structural and electrical properties of the 2D passivation layers based on a lead iodide framework. The high PCE of 26.7% of a monolithic two-terminal wide-bandgap perovskite/silicon tandem solar cell was made possible by the ideal combination of spectral responses of the top and bottom cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Subcell Coupling in Tandem Solar Cells: Measurements and Modeling

Closely stacking two or more photovoltaic (PV) subcells together to form tandem solar cells inevitably results in subcell coupling that is important to understand. Here we describe how this coupling can be modeled and characterized for two-, three-, and four-terminal tandems (hereafter 2T, 3T or 4T).

2T↗
DOE OSTI2026

Review on Perovskite Solar Cells: From Single‐Junction Devices to Tandem Deployment in Space

Perovskite solar cells (PSCs) have emerged as a transformative photovoltaic technology, offering high power conversion efficiency (PCE) and the potential for cost-effective manufacturing. However, stability and large-scale manufacturing remain critical challenges that must be addressed for widespread adoption. This review provides a roadmap from single-junction perovskite solar cells to tandem deployment in space. First, material-level innovations are discussed, including mixed-cation and low-dimensional perovskites, transport materials, and additives that improve thermal and structural stability while enhancing efficiency. Then, we examine both established industrial standards and emerging scientific protocols aimed at stabilizing PSCs under operational conditions, including tandem cell integration strategies and encapsulation techniques to mitigate performance degradation. Manufacturing scalability is a focal point, where deposition methods and green solvents are explored to improve large-area film uniformity and reduce environmental impact. Additionally, the increasing viability of PSCs in extraterrestrial environments is assessed, with emphasis on their performance in space applications, radiation resistance, and flexible lamination methods for deployment in extreme conditions. Progress across materials innovation, device architectures, stability testing protocols, and both terrestrial and extraterrestrial applications collectively drives perovskite photovoltaics toward higher efficiency, stability, and cost-effectiveness.

flexible PSCs↗
DOE OSTI2024

Photoluminescence Excitation Spectroscopy of Monolithic Perovskite/Silicon Tandem Solar Cells

The contributions of each subcell to the total photoluminescence (PL) spectrum of a monolithic perovskite/silicon tandem solar cell are distinguished using a variable wavelength excitation laser source. Here, in the results, a strong overlap of the PL spectrum is shown, originating from the sub‐bandgap region of the perovskite top cell with the emission from the silicon bottom cell, even with near‐infrared excitation wavelengths. Consequently, an excitation laser wavelength of at least 815 nm is required for a dominant PL signal from the silicon bottom cell, and a wavelength no longer than 750 nm is needed for a dominant PL signal from the perovskite top cell in the investigated tandem solar cell. Moreover, a shoulder in the sub‐bandgap emission of the perovskite top cell almost coincides with the PL response region of the silicon bottom cell, which can cause signal confusion in subcell characterization.

14 SOLAR ENERGY↗
DOE OSTI2025

Low temperature polyolefin deconstruction via tandem cracking-hydrogenation

The use of aluminum chloride in dichloromethane to crack polyolefin chains in tandem with alkylation of the resulting products has been previously reported as an efficient polyolefin recycling route. Building off this work, we report that a tandem cracking-hydrogenation system also efficiently converts polyolefins into gasoline-range light alkanes at mild temperatures without needing a hydrocarbon co-reactant. This Lewis acid and hydrogenation bifunctional system uses anhydrous aluminum chloride as the acid catalyst and Pd/C as a hydrogenation catalyst to achieve nearly 80 % conversion of low-density polyethylene (LDPE) at 70 °C in three hours, with 90+% selectivity towards gasoline-range (C 4 -C 12 ) branched alkanes. By combining the endothermic cracking reaction with the exothermic hydrogenation reaction, the thermodynamic limitations to low-temperature polyolefin deconstruction can be overcome. In using hydrogenation instead of alkylation, the system’s carbon efficiency is greatly improved, the cost of the reactants is reduced and the overall mass of both reactants and products reduced as well.

Alkylation↗
DOE OSTI2022

Anion exchange and extraction chromatography tandem column isolation of zirconium-89 ( 89 Zr) from cyclotron bombarded targets using an automated fluidic platform

The long-lived positron emitter 89 Zr is a highly promising nuclide employed in diagnostic Positron Emission Tomography (PET) imaging. Methods of radiochemical processing to obtain 89 Zr for clinical use are traditionally performed with a single hydroxamate resin column. In this work, we present a tandem column purification method for the preparation of high-purity 89 Zr from cyclotron bombarded Y metal foils. The primary column is a macroporous, strongly basic anion exchange resin on styrene divinylbenzene co-polymer. The secondary microcolumn, with an internal volume of 33 µL, is packed with an extraction chromatography resin (ExCR) loaded with HDEHP. A condition of “inverted selectivity” is presented, wherein the 89 Zr elution from the primary column is synonymous with the load condition on the secondary column. The ability to transfer 89 Zr from one column to the next allows two sequential column clean-up methods to be performed prior to the final elution of the 89 Zr product. This approach assures delivery of very high purity 89 Zr . The tandem column purification process has been implemented into a prototype automated fluidic system. Optimization of the method is presented, followed by evaluation of the process using seven cyclotron bombarded Y metal foil targets. Once optimized, we found that 93.7±2.3% of the 89 Zr present in the foils was recovered in the secondary column elution fraction (0.8 M oxalic acid). Radiochromatograms of the product elution peaks enabled determination of full width at half-maximum (FWHM) and 89 Zr collection yields as a function of volume. Because of the small size of the secondary microcolumn, a 89 Zr product volume of ~0.28 mL is reported, which provides a substantially increased nuclide concentration over traditional methods. Finally, we evaluated the transchelation of the resulting 89 Zr oxalate product to deferoxamine mesylate (DFOM) salt. We observed effective specific activities (ESA) and bindable metals concentrations ([M B ]) that exceed those reported by the traditional single hydroxamate column method.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

High‑performance cold‑climate heat pump using tandem compressors with and without vapor injection: Laboratory investigation and field demonstration

Cold‑climate air‑source heat pumps must maintain heating capacity and stable operation at low ambient temperatures for residential applications. This study adapts tandem single-speed compressors—proven in commercial systems —for residential CCHPs, integrating VI and validating performance across laboratory and extreme field conditions to achieve cold-climate targets. That is to achieve ≥75% of the rated heating capacity at −25.0 °C relative to 8.3 °C and heating coefficient of performance (COP) greater than 4.0 at 8.3 °C. Laboratory testing confirmed that both configurations met these targets while operating within acceptable discharge‑temperature limits. Relative to the non‑VI configuration, the VI system provided up to 15% higher heating capacity and up to 9% higher heating COP under identical conditions, yielding a 5.6–9.1% increase in heating seasonal performance factor (HSPF). Field tests in Ohio and Alaska, with minimum outdoor temperatures of −25.0 °C and −34.0 °C, respectively, showed stable operation, minimal supplemental heating (<3.2%), low defrost penalties, and consistent output. Tandem‑compressor architectures proves promising for cold-climate residential heating.

Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗