Search NASA⌕ Search

SEARCH · Search NASA

Results for “identification problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Learning characteristics of a space-time neural network as a tether skiprope observer

The Software Technology Laboratory at the Johnson Space Center is testing a Space Time Neural Network (STNN) for observing tether oscillations present during retrieval of a tethered satellite. Proper identification of tether oscillations, known as 'skiprope' motion, is vital to safe retrieval of the tethered satellite. Our studies indicate that STNN has certain learning characteristics that must be understood properly to utilize this type of neural network for the tethered satellite problem. We present our findings on the learning characteristics including a learning rate versus momentum performance table.

Lea, Robert N.↗

Learning characteristics of a space-time neural network as a tether skiprope observer

The Software Technology Laboratory at JSC is testing a Space Time Neural Network (STNN) for observing tether oscillations present during retrieval of a tethered satellite. Proper identification of tether oscillations, known as 'skiprope' motion, is vital to safe retrieval of the tethered satellite. Our studies indicate that STNN has certain learning characteristics that must be understood properly to utilize this type of neural network for the tethered satellite problem. We present our findings on the learning characteristics including a learning rate versus momentum performance table.

Lea, Robert N.↗

Stakeholder-Engaged Structured Decision Making for the Los Alamos Legacy Cleanup Mission - 20501

The Los Alamos National Laboratory (LANL) environmental legacy cleanup program requires decisions to be made for environmental remediation, decommissioning and disposal or management of radioactive waste. This legacy cleanup program was established to address groundwater contamination, material disposal areas (MDAs) that have been used to dispose of radioactive and other waste material, and 'aggregate areas' that might produce radioactive or other chemical waste as a result of remediation activities. The LANL site is regulated for environmental concerns under the Resource Conservation and Recovery Act (RCRA). However, some parts of LANL, such as material disposal area G (MDA G), have disposed of radioactive waste under DOE Order 435.1, and are subject to other regulations. For example, decommissioning the remote-handled TRU material stored in 33 shafts at MDA G falls under EPA's 40 CFR 191. Collectively, the regulations are all aimed in the same direction of finding the best solution, either through constructs such as 'as low as reasonably achievable' (ALARA), considering balancing factors as opposed to only cost and human health risk, and, under EPA regulations such as RCRA and NEPA, evaluating impact from all chemicals and both human health and ecological endpoints. Despite the basic goals and objectives of the regulations or their guidance, the main challenge is in their implementation. Arguably perhaps, but really in principle, all of these (and similar) regulations are asking for a decision analysis to be performed. Implementation challenges encountered have included lack of understanding of decision analysis in the industry, lack of effective stakeholder engagement in the decision analysis process, and lack of appreciation of the need to separate value judgments from science, the latter leading to developing conservative, or protective, science-based models. Conservative models lead to poor solutions, lack of effective stakeholder engagement leads to long drawn out protracted approaches to finding a solution (which also might never be found with this approach), and lack of understanding of decision analysis and Bayesian statistics causes poor models to be built, which creates unfortunate situations of 'garbage in, garbage out' becoming the basis for decision making. Stakeholder-engaged structured decision making (SDM) is an approach to solving problems that relies on the theory of decision science to involve stakeholders in the decision-making process. This approach incorporates stakeholder values using a scientifically rigorous methodology that separates value judgments from science in a way that helps avoid the pitfalls of biased, protective, or conservative modeling. This approach has its foundation in Keeney's 1992 treatise on value-focused thinking [1]. Keeney advocated a paradigm shift in decision making based on the idea that the standard way of thinking about decisions is backwards. The standard approach of focusing first on identifying alternatives rather than on articulating values results in a reactive approach with the emphasis on mechanics and fixed choices instead of the core values that have meaning to stakeholders. This paradigm shift effectively engages all stakeholders in the decision-making process while using a values focused thinking approach that can lead to the identification of decision opportunities and the creation of better alternatives. The intent is to be proactive and generate solutions that are related directly to values and objectives as identified by stakeholders. There are, perhaps, two overarching reasons why SDM can be used to benefit LANL's environmental legacy cleanup. Some of LANL's remaining waste management and environmental management problems are challenging and complex (for example, the Cr and RDX plumes, and MDAs) and while the traditional approach has, arguably, worked well for relatively simple risk-based problems, it cannot, or should not, be applied to more complex problems if the most effective and efficient solutions are desired. The second reason is cost. This has perhaps become more critical since publication of the Government Accountability Office (GAO) reports that DoE's environmental liability is considered a high-risk concern for the nation [2]. The focus of SDM is on structuring solutions to decision risk problems by first addressing stakeholder and decision maker values and subsequently developing decision objectives and ways to measure those objectives, preference weighting across objectives, identifying decision alternatives that best achieve those values, and characterizing uncertainty in predictions of the measures. Because a complete decision model is created using SDM, it can be evaluated to find the main elements of the model that drive, or predict, the best solution. This approach creates complete decision models that are transparent, traceable, reproducible and technically defensible. The science behind SDM, or decision analysis, is well founded, yet it is not unusual to see ad hoc approaches to decision making implemented under various environmental regulations that are pertinent to the LANL site, including NEPA, RCRA and DOE Order 435.1. Such ad hoc approaches are often not transparent or traceable, and lack reproducibility and technical defensibility. The LANL legacy cleanup program has embarked on using SDM to address the complex problems that remain. Stakeholder meetings have been held, and a prototype version of the stakeholder value system has been developed. Further meetings are expected in the future to address specific project needs. This is a long-term endeavor considering the complex environmental problems faced by DOE EM in Los Alamos (EM-LA), and careful planning, consideration of stakeholder value systems, and engagement with stakeholders throughout the SDM process is expected to lead to a successful endpoint. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Application of Bound-to-Bound Data Collaboration approach for development and uncertainty quantification of a reduced char combustion model

The development of efficient industrial oxy-coal boilers can be significantly aided by Computational Fluid Dynamics (CFD) tools, as far as fidelity in modeling coal combustion is also complemented by feasible computational costs. Reduced and predictive models are the most suitable for this application scale. Reduced models feature predictivity when they are validated against a broad range of experiments and targeted by Uncertainty Quantification (UQ) procedures. This work proposes a numerical procedure that uses Bound-to-Bound Data Collaboration (B2B-DC) to derive a reduced char combustion model describing transport phenomena and reactions between char carbon and O 2 , CO 2 and H 2 O, in both conventional and oxy-conditions. The approach determines the consistency between a numerical model and an experimental dataset. The latter is made up of the experiments carried out in an optically accessible laminar entrained flow reactor, operated by Sandia National Laboratories. The procedure follows five steps towards predictive modeling capability, namely: quantification of the uncertainty in the experiments, via instrument verification and modeling; development of a physics model and continuous improvement of its fidelity, via model-form uncertainty; identification of the uncertain and most sensitive parameters and of their prior bounds; sampling of the initial uncertain parameter space and training of a surrogate model; validation of the physics model via inference from the data. The last step, also known as inverse problem, is performed by applying the Bound-to-Bound Data Collaboration approach. A char combustion model is found consistent with the experimental data and its validity stands for conventional and oxy-combustion conditions. It accounts for heterogeneous reactions at the particle surface, mass transport of species in the particle boundary layer, pore diffusion and surface area changes. The consistent reduced model overcomes the differences in mass transport and kinetics observed in the experimental campaign. In conclusion, a reduction of the initial degree of uncertainty in both model and experiments is achieved.

42 ENGINEERING↗

Eleventh Annual Conference on Manual Control

This volume contains a compilation of written versions of papers presented at the Eleventh Annual Conference on Manual Control in a meeting held at NASA-Ames Research Center, May 21-23, 1975. Five main topics were discussed during this three-day conference. These were covered in sessions on Concurrent Tasks, Physiological Systems, Controls and Displays, Performance/Workload Evaluation, and System Identification. Forty-nine papers are included with presentations on results of analytical studies to develop and evaluate human operator models for a range of control task, vehicle dynamics and display situations; results of tests of physiological control systems and applications to medical problems; and on results of simulator and flight tests to determine display, control and dynamics effects on operator performance and workload for aircraft, automobile and remote control systems.

Source record↗

An Empirical Bayes Approach to Spatial Analysis

Multi-channel LANDSAT data are collected in several passes over agricultural areas during the growing season. How empirical Bayes modeling can be used to develop crop identification and discrimination techniques that account for spatial correlation in such data is considered. The approach models the unobservable parameters and the data separately, hoping to take advantage of the fact that the bulk of spatial correlation lies in the parameter process. The problem is then framed in terms of estimating posterior probabilities of crop types for each spatial area. Some empirical Bayes spatial estimation methods are used to estimate the logits of these probabilities.

Morris, C. N.↗

Precision pointing and control of flexible spacecraft

The problem and long term objectives for the precision pointing and control of flexible spacecraft are given. The four basic objectives are stated in terms of two principle tasks. Under Task 1, robust low order controllers, improved structural modeling methods for control applications and identification methods for structural dynamics are being developed. Under Task 2, a lab test experiment for verification of control laws and system identification algorithms is being developed. For Task 1, work has focused on robust low order controller design and some initial considerations for structural modeling in control applications. For Task 2, work has focused on experiment design and fabrication, along with sensor selection and initial digital controller implementation. Conclusions are given.

Bantell, M. H., Jr.↗

Thermographic Leak Detection of the Space Shuttle Main Engine Nozzle

The Space Shuttle Main Engines Nozzles consist of over one thousand tapered Inconel coolant tubes brazed to a stainless steel structural jacket. Liquid Hydrogen flows through the tubing, from the aft to forward end of the nozzle, under high pressure to maintain a thermal balance between the rocket exhaust and the nozzle wall. Three potential problems occur within the SSME nozzle coolant tubes as a result of manufacturing anomalies and the highly volatile service environment including poor or incomplete bonding of the tubes to the structural jacket, cold wall leaks and hot wall leaks. Of these conditions the identification of cold wall leaks has been the most problematic. The methods and results presented in this summary addresses the thermographic identification of cold wall "interstitial" leaks between the structural jacket and coolant tubes of the Space Shuttle Main Engines Nozzles.

Walker, James L.↗

Acoustic emission Bayesian source location: Onset time challenge

Robust identification of the most accurate observed input data among a pool of observations is key in modeling and decision making. A statistically biased observed measurement deteriorates the predictive power of a model and affects decision-making ability based on the prediction of the model. When two competing methods of measurement are available, such as methods which identify arrival times in acoustic emission (AE) signals, a principal question is whether one of the two obtained datasets, or a combination of the two, should be used later on, for example, to localize an AE source. This question becomes more important when collecting not repeatable data such as AE signals created by a propagating crack. Here this paper considers an inverse source location problem in a concrete block to address the mentioned issue, a proposed methodology which also has wider application in competitive data selection. Elastic energy released by an AE event, such as a propagating crack, is recorded by acoustic emission data acquisition system. The onset time of AE signals is often used to locate the source of the event, and its accuracy directly affects the precision of source identification. This research proposes an innovative approach to select the most probable onset time obtained from two automatic picker methods. The proposed method selects the most probable onset times, which are observed by each picker for each sensor, in a probabilistic fashion. To validate the proposed method, the most accurate onset time observed by each picker is identified by visual inspection and is compared with the one is selected by the proposed method. Finally, the dataset is used for source location identification. Results show that picked onset times determined by the proposed method generate more accurate source identification when compared with coordinates obtained using each dataset individually.

97 MATHEMATICS AND COMPUTING↗

Identification of aircraft stability and control derivatives in the presence of turbulence

A maximum likelihood estimator for a linear system with state and observation noise is developed to determine stability and control derivatives from flight data obtained in the presence of turbulence. The formulation for the longitudinal short-period mode is presented briefly, including a special case that greatly simplifies the problem if the measurement noise on one signal is negligible. The effectiveness and accuracy of the technique are assessed by applying it first to simulated flight data, in which the true parameter values and state noise are known, then to actual flight data obtained in turbulence. The results are compared with data obtained in smooth air and with wind-tunnel data. The complete maximum likelihood estimator, which accounts for both state and observation noise, is shown to give the most accurate estimate of the stability and control derivatives from flight data obtained in turbulence. It is superior to the techniques that ignores state noise and to the simplified method that neglects the measurement noise on the angle-of-attack signal.

Iliff, K. W.↗

THE NONLINEAR AND NONLOCAL LINK BETWEEN MACROSCOPIC ALFVÉNIC AND MICROSCOPIC ELECTROSTATIC SCALES IN THE SOLAR WIND

The local heating of the solar-wind gas during its expansion represents one of the most intriguing problems in space plasma physics and is at present the subject of a relevant scientific effort. The possible mechanisms that could account for local heat production in the interplanetary medium are most likely related to the turbulent character of the solar-wind plasma. Nowadays, many observational and numerical analyses are devoted to the identification of fluctuation channels along which energy is carried from large to short wavelengths during the development of the turbulent cascade; these fluctuation channels establish the link between macroscopic and microscopic scales. In this Letter, by means of a quantitative comparison between in situ measurements in the solar wind from the STEREO spacecraft and numerical results from kinetic simulations, we identify an electrostatic channel of fluctuations that develops along the turbulent cascade in a direction parallel to the ambient magnetic field. This channel appears to be efficient in transferring the energy from large Alfvénic to short electrostatic acoustic-like scales up to a range of wavelengths where it can finally be turned into heat, even when the electron to proton temperature ratio is of the order of unity.

79 ASTRONOMY AND ASTROPHYSICS↗

Automatic Attribute Profiles

Morphological attribute profiles are multilevel decompositions of images obtained with a sequence of transformations performed by connected operators. They have been extensively employed in performing multi-scale and region-based analysis in a large number of applications. One main, still unresolved, issue is the selection of filter parameters able to provide representative and non-redundant threshold decomposition of the image. This paper presents a framework for the automatic selection of filter thresholds based on Granulometric Characteristic Functions (GCFs). GCFs describe the way that non-linear morphological filters simplify a scene according to a given measure. Since attribute filters rely on a hierarchical representation of an image (e.g., the Tree of Shapes) for their implementation, GCFs can be efficiently computed by taking advantage of the tree representation. Eventually, the study of the GCFs allows the identification of a meaningful set of thresholds. Therefore, a trial and error approach is not necessary for the threshold selection, automating the process and in turn decreasing the computational time. It is shown that the redundant information is reduced within the resulting profiles (a problem of high occurrence, as regards manual selection). The proposed approach is tested on two real remote sensing data sets, and the classification results are compared with strategies present in the literature.

97 MATHEMATICS AND COMPUTING↗

Earth resources data processor

The recent development of manned and unmanned space vehicles has brought about an almost unprecedented advance in studies concerned with remotely sensed earth observations. With this advance comes an unprecedented amount of data. The problem arises of how to efficiently analyze and compress unmanageable amounts of data into manageable amounts of useful information. A recently developed computer program is proposed as a partial solution to the above problem. The computer program is designed to determine the ground scene location and distribution of features extracted from remotely sensed earth observation data without human involvement in the data processing or a priori knowledge of ground truth. Human involvement and judgement are reserved for identification of the features presented in the compressed data.

Phillips, M. R.↗

United States manned spacecraft reliability experience

Attention is given to the reliability controls in manned spacecraft programs, taking into account the project Mercury, the Gemini program, the Apollo program, the Skylab program, and the Apollo-Soyuz test project. Reliability controls used in these programs are related to reliability management, parts and materials control, failure mode and effects analysis, reliability quantitative analysis, problem reporting and corrective action control, test control, limited-life control, and milestone reviews. A summary is presented of the major reliability tasks and innovations being used on the Space Shuttle program. Examples of these innovations include improved management techniques and an early identification of specific certification tests.

Kleinknecht, K. S.↗

Insensitive control technology development

THe investigation of two insensitive controller synthesis techniques was reported. The finite dimensional inverse approach produces a time varying insensitive controller and/or parameter identifier by constructing inverse functions derived from a finite number of input output pair relationships. The MD/IM concept relies on the information matrix theory that was developed in the estimation and identification field. The MD/IM synthesis technique is based on the hypothesis that minimizing the information matrix will reduce system identifiability and consequently system sensitivity to uncertain parameters. The controllers designed with both techniques were evaluated on a realistic C-5A aircraft flight control problem. Results indicate that the FDI controller is more suited to trajectory type problems because of its time varying nature. The MD/IM controller performed as well as the top-rated controllers of the initial effort and has direct application to aircraft flight control problems.

Harvey, C. A.↗

Electrical conduction in polymer dielectrics

The use of polymer dielectrics with moderate resistivities could reduce or eliminate problems associated with spacecraft charging. The processes responsible for conduction and the properties of electroactive polymers are reviewed, and correlations drawn between molecular structure and electrical conductivity. These structure-property relationships led to the development of several new electroactive polymer compositions and the identification of several systems that have the requisite thermal, mechanical, environmental and electrical properties for use in spacecraft.

Cotts, D. B.↗

A preliminary evaluation of the generalized likelihood ratio for detecting and identifying control element failures in a transport aircraft

The application of the Generalized Likelihood Ratio technique to the detection and identification of aircraft control element failures has been evaluated in a linear digital simulation of the longitudinal dynamics of a B-737 aircraft. Simulation results show that the technique has potential but that the effects of wind turbulence and Kalman filter model errors are problems which must be overcome.

Bundick, W. T.↗

Aerodynamic instability: A case history

The identification, diagnosis, and final correction of complex machinery malfunctions typically require the correlation of many parameters such as mechanical construction, process influence, maintenance history, and vibration response characteristics. The progression is reviewed of field testing, diagnosis, and final correction of a specific machinery instability problem. The case history presented addresses a unique low frequency instability problem on a high pressure barrel compressor. The malfunction was eventually diagnosed as a fluidic mechanism that manifested as an aerodynamic disturbance to the rotor assembly.

Eisenmann, R. C.↗