Search NASA⌕ Search

SEARCH · Search NASA

Results for “bit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Performance results for a hybrid coding system.

Results of computer simulation studies of the hybrid pull-up bootstrap decoding algorithm, using a constraint length 24, nonsystematic, rate 1/2 convolutional code for the symmetric channel with both binary and eight-level quantized outputs. Computational performance was used to measure the effect of several decoder parameters and determine practical operating constraints. Results reveal that the track length may be reduced to 500 information bits with small degradation in performance. The optimum number of tracks per block was found to be in the range from 7 to 11. An effective technique was devised to efficiently allocate computational effort and identify reliably decoded data sections. Long simulations indicate that a practical bootstrap decoding configuration has a computational performance about 1.0 dB better than sequential decoding and an output bit error rate about .0000025 near the R sub comp point.

Hoffman, L. B.↗

A simple branch synchronizer for convolutional decoders.

A simple branch synchronizer for rate 1/3, constraint length five, nonsystematic convolutional code is described. The scheme derives the sync information from the received channel bits, thus avoiding the extra formatting of the sync data at the transmitter and receiver, and increasing the data rate. The synchronizer detects the proper sync bits for both the in-phase and phase ambiguous cases. The design is adaptable to nonsystematic codes of different constraint lengths.

Taqvi, S. Z. H.↗

Spatial transform coding of color images.

The application of the transform-coding concept to the coding of color images represented by three primary color planes of data is discussed. The principles of spatial transform coding are reviewed and the merits of various methods of color-image representation are examined. A performance analysis is presented for the color-image transform-coding system. Results of a computer simulation of the coding system are also given. It is shown that, by transform coding, the chrominance content of a color image can be coded with an average of 1.0 bits per element or less without serious degradation. If luminance coding is also employed, the average rate reduces to about 2.0 bits per element or less.

Pratt, W. K.↗

Data-matched filter

After amplification and normalization, incoming data bits are fed, alternately, to pair of integrators. While one integrator is operating, content of other is on hold, sample, and dump. Clock derived in bit-timing extractor times and controls integrators. Frequency of clock is one-half data rate.

Scheinberg, N. R.↗

Input-output, expandable-parity network

Large-scale integrated circuit generates and checks parity of four eight-bit registers. In addition, circuit will indicate by output signal whether parity error exists. Circuit can also generate or check parity of words up to 32 bits. This is done by making appropriate internal wiring connections on the large-scale integrated chip.

Mckevitt, J. F., III↗

A translator and simulator for the Burroughs D machine

The D Machine is described as a small user microprogrammable computer designed to be a versatile building block for such diverse functions as: disk file controllers, I/O controllers, and emulators. TRANSLANG is an ALGOL-like language, which allows D Machine users to write microprograms in an English-like format as opposed to creating binary bit pattern maps. The TRANSLANG translator parses TRANSLANG programs into D Machine microinstruction bit patterns which can be executed on the D Machine simulator. In addition to simulation and translation, the two programs also offer several debugging tools, such as: a full set of diagnostic error messages, register dumps, simulated memory dumps, traces on instructions and groups of instructions, and breakpoints.

Roberts, J.↗

Pulsed plasma solid propellant microthruster for the synchronous meteorological satellite. Task 4: Engineering model fabrication and test report

Two flight prototype solid propellant pulsed plasma microthruster propulsion systems for the SMS satellite were fabricated, assembled and tested. The propulsion system is a completely self contained system requiring only three electrical inputs to operate: a 29.4 volt power source, a 28 volt enable signal and a 50 millsec long command fire signal that can be applied at any rate from 50 ppm to 110 ppm. The thrust level can be varied over a range 2.2 to 1 at constant impulse bit amplitude. By controlling the duration of the 28 volt enable either steady state thrust or a series of discrete impulse bits can be generated. A new technique of capacitor charging was implemented to reduce high voltage stress on energy storage capacitors.

Guman, W. J.↗

A programmable computer interface for CAMAC

An interface has been developed for CAMAC instrumentation systems that implements data transfers controlled either by the computer CPU or by an autonomous (data-channel) processor in the interface unit. The data channel processor executes programs stored in the computer memory. These programs consist of standard CAMAC module commands plus special control characters and commands for the processor itself. The interface was built for the PDP-15 computer, which has an 18-bit word structure, but both 18- and 24-bit data transfers can be made. A software system has been written that exploits the many features of the processor.

Bercaw, R. W.↗

Remote haze monitoring by satellite: A study to demonstrate the feasibility and determine the optimum method

The author has identified the following significant results. A general purpose flexible computer program for the analysis of ERTS MSS data has been written for the Control Data 7600 computer. By putting all of the analysis operations into a separate subroutine the user may concentrate on the analysis. The problems of getting the information into the computer in convenient format is solved once and need not be tampered with each time a new analysis procedure is desired. The problems of getting information written by the XDS computers in 8 bit byte format into a convenient format for analysis on the 60 bit word format CDC 7600 computer are not trivial. A general purpose program to accomplish this has been written and is available from the investigators upon request.

Rogers, E. H.↗

Design of communication systems using short-constraint-length convolutional codes.

A method is presented for calculating the effect of carrier-phase reference error in a receiver phase-locked loop on bit error rates in convolutionally coded data, for the practical design of systems using short-constraint-length convolutional codes. A set of design curves shows the relation between design bit error rate, uplink carrier tracking loop SNR, downlink total SNR, and downlink modulation index. These curves make possible rapid and simple system optimization.

Merrill, H. M.↗

Performance of correlation receivers in the presence of impulse noise.

An impulse noise model, which assumes that each noise burst contains a randomly weighted version of a basic waveform, is used to derive the performance equations for a correlation receiver. The expected number of bit errors per noise burst is expressed as a function of the average signal energy, signal-set correlation coefficient, bit time, noise-weighting-factor variance and probability density function, and a time range function which depends on the crosscorrelation of the signal-set basis functions and the noise waveform. Unlike the performance results for additive white Gaussian noise, it is shown that the error performance for impulse noise is affected by the choice of signal-set basis function, and that Orthogonal signaling is not equivalent to On-Off signaling with the same average energy. Furthermore, it is demonstrated that the correlation-receiver error performance can be improved by inserting a properly specified nonlinear device prior to the receiver input.

Moore, J. D.↗

The transmission of low frequency medical data using delta modulation techniques.

The transmission of low-frequency medical data using delta modulation techniques is described. The delta modulators are used to distribute the low-frequency data into the passband of the telephone lines. Both adaptive and linear delta modulators are considered. Optimum bit rates to minimize distortion and intersymbol interference are discussed. Vibrocardiographic waves are analyzed as a function of bit rate and delta modulator configuration to determine their reproducibility for medical evaluation.

Arndt, G. D.↗

Pseudorandom noise for telemetry error rate measurement applications and limitations.

A pseudorandom noise (PRN) generator functional design has been developed which is superior to the commercially available instrument in usable bandwidth and in the closeness of fit to the gaussian probability distribution in the 'tails' of the curve. The principal disadvantage of PRN sources for bit error rate (BER) measurements is that the probability distribution is truncated in the tails. This truncation of the probability distribution results in a similar truncation of the BER curve - i.e., there is a minimum BER which can be measured, below which the only possible result is zero. The minimum nonzero BER actually computed with the PRN source developed was 0.00001 with a pseudorandom sequence of 131,071 bits. It is theoretically possible, with a longer sequence, to achieve a minimum BER of 0.000001 with the same design.

Hopkins, P. M.↗

Design relationships for holographic memories.

The maximum capacity of a block-oriented, random-access memory is determined primarily by the geometrical parameters of the lenses required to create a Fourier transform of a spatial bit pattern and to image the reconstructed bits onto a photodetector array. Furthermore, the maximum packing density is determined primarily by the same parameters. Several important relationships are developed that are useful in the preliminary design of holographic memories.

Lugt, A. V.↗

Maximum likelihood synchronizer for binary overlapping PCM/NRZ signals.

A maximum likelihood parameter estimation technique for the self bit synchronization problem is investigated. The input sequence to the bit synchronizer is a sequence of binary overlapping PCM/NRZ signal in the presence of white Gaussian noise with zero mean and known variance. The resulting synchronizer consists of matched filters, a transition device and a weighting function. Finally, the performance is examined by Monte Carlo simulations.

Wang, C. D.↗

Data processor with conditionally supplied clock signals

Parallel data processor clock pulses are conditionally supplied to processing unit in response to relative values of binary bit of control source and binary bit derived on single lead. Use of single lead simplifies fabrication of large-scale integrated networks.

Lesniewski, R. J.↗

Method and apparatus for a single channel digital communications system

A method and apparatus are described for synchronizing a received PCM communications signal without requiring a separate synchronizing channel. The technique provides digital correlation of the received signal with a reference signal, first with its unmodulated subcarrier and then with a bit sync code modulated subcarrier, where the code sequence length is equal in duration to each data bit.

Couvillon, L. A., Jr.↗

Testing and evaluation of the LES-6 pulsed plasma thruster by means of a torsion pendulum system

Performance characteristics of the LES-6 pulsed plasma thruster over a range of input conditions were investigated by means of a torsion pendulum system. Parameters of particular interest included the impulse bit and time average thrust (and their repeatability), specific impulse, mass ablated per discharge, specific thrust, energy per unit area, efficiency, and variation of performance with ignition command rate. Intermittency of the thruster as affected by input energy and igniter resistance were also investigated. Comparative experimental data correlation with the data presented. The results of these tests indicate that the LES-6 thruster, with some identifiable design improvements, represents an attractive reaction control thruster for attitude contol applications on long-life spacecraft requiring small metered impulse bits for precise pointing control of science instruments.

Hamidian, J. P.↗