Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Path-integral and Ornstein-Zernike study of quantum fluid structures on the crystallization line

Liquid neon, liquid para-hydrogen, and the quantum hard-sphere fluid are studied with path integral Monte Carlo simulations and the Ornstein-Zernike pair equation on their respective crystallization lines. The results cover the whole sets of structures in the r-space and the k-space and, for completeness, the internal energies, pressures and isothermal compressibilities. Comparison with experiment is made wherever possible, and the possibilities of establishing k-space criteria for quantum crystallization based on the path-integral centroids are discussed. In this regard, the results show that the centroid structure factor contains two significant parameters related to its main peak features (amplitude and shape) that can be useful to characterize freezing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Confocal Raman Microscopy of the Interfacial Regions of Liquid Chromatographic Stationary-Phase Materials

The influence of organic modifiers on the structure of reversed-phase liquid chromatographic (RPLC) stationary phases has been a topic of considerable investigation. Retention of organic modifiers in the stationary phase has previously been determined by chromatographic measurements, and the polarity and heterogeneity of the resulting solvation environment has been studied using solvatochromic, fluorescent, and spin probes. In the present work, the composition and solvation environment of a stationary phase is investigated using confocal Raman microscopy, which allows the in situ examination of the solvation environment within individual chromatographic stationary phase particles without the use of probe molecules. The accumulation of organic modifiers in the stationary phase can be quantified, and the environment of the modifier in the stationary phase can be determined. Specifically, we have investigated the interactions of acetonitrile with C 18 -functionalized silica particles using confocal Raman microscopy, which enables the sampling of small (~1 fL) volumes within individual 10 μm particles. Bare chromatographic silica was also studied in order to investigate the interactions of acetonitrile with surface silanols. The nitrile-stretching (ν CN ) frequency of acetonitrile responds sensitively to the dipolarity of its local microenvironment. The populations of solution-phase and interfacial acetonitrile are thus spectroscopically distinguishable. Scattering from ν CN shows contributions from three different environments within a single RPLC chromatographic particle: acetonitrile in the interparticle mobile phase, C 18 -chain associated acetonitrile, and acetonitrile that is interacting with residual surface silanols. Here, data are presented quantifying these populations and characterizing their environments within single stationary phase particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymerization of sodium-doped liquid nitrogen under pressure

First-principles molecular dynamics (FPMD) simulations are performed on 6 and 12% Na in dense liquid N. A detailed description of structural and electronic properties leading to an understanding of the effect of Na doping on the polymerization phase transition of N is presented. Additionally, compression of the mixtures from 5 to 90 GPa shows three distinct regions of characteristic local order separated by pressures near 30 and 65 GPa. Computation of Gibbs free energies of mixing shows that these mixtures are thermodynamically stable beyond 20 and 15 GPa for 6 and 12% Na, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Technical Report - Final report

This project was a collaborative effort between Dr Teresa Burns and Dr John Larese to study the physisorption of polar molecules on ionic substrates. The work will be completed at both Coastal Carolina University and Brookhaven National Laboratory. The goals of the research are: 1) to provide detailed thermodynamic information about dipolar molecules adsorbed on ionic substrates, critical to accurately modeling the systems of interest using a spin-1 Ising model; 2) to study the structure of the adsorbed layer from the gas phase, experimentally verifying the application of the model to these systems; 3) to extend the modeling studies and structural measurements to systems adsorbed from the liquid phase. The systems will be studied using thermodynamic techniques, e.g., adsorption isotherm both from the gas and liquid phase, and x-ray structural measurements. This project will strengthen the physical science research efforts at CCU, and hence in South Carolina.

36 MATERIALS SCIENCE↗

Two coexisting liquid phases in switchable ionic liquids

Switchable ionic liquids (SWILs) derived from organic bases and alcohols are attractive due to their applications in gas capture, separations, and nanomaterial synthesis. However, their exact solvent structure still remains a mystery. Here, we present the first chemical mapping of a SWIL solvent structure using in situ time-of-flight secondary ion mass spectrometry. In situ chemical mapping discovers two coexisting liquid phases and molecular structures vastly different from conventional ionic liquids. SWIL chemical speciation is found to be more complex than the known stoichiometry. Dimers and ionic clusters have been identified in SIMS spectra; and confirmed to be the chemical species differentiating from non-ionic liquids via spectral principal component analysis. Our unique in situ molecular imaging has advanced the understanding of SWIL chemistry and how this “heterogeneous” liquid structure may impact SWILs’ physical and thermodynamic properties and associated applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and analysis of composite primary structures for advanced launch vehicles

The current status of the Lightweight Composite Intertank Structures (LCIS) study, a program aimed at developing technologies required to apply advanced composite materials to launch vehicle primary structures, is reviewed. The launch system concept used for establishing design requirements consisted of a fully reusable winged booster and a partially reusable core vehicle. The component selected from this system for design and manufacturing studies was the core vehicle intertank adapter, a component consisting of approximately 26-ft diameter by 25 ft long stiffened cylindrical structure that separates the liquid hydrogen and liquid oxygen tanks on the core vehicle. The discussion covers the program approach, design requirements, material properties, structural analysis, and the test program.

Rix, C.↗

Thermophysical Properties of Liquid Te: Density, Electrical Conductivity, and Viscosity

The thermophysical properties of liquid Te, namely, density, electrical conductivity, and viscosity, were determined using the pycnometric and transient torque methods from the melting point of Te (723 K) to approximately 1150 K. A maximum was observed in the density of liquid Te as the temperature was increased. The electrical conductivity of liquid Te increased to a constant value of 2.89 x 10(exp 5 OMEGA-1m-1) as the temperature was raised above 1000 K. The viscosity decreased rapidly upon heating the liquid to elevated temperatures. The anomalous behaviors of the measured properties are explained as caused by the structural transitions in the liquid and discussed in terms of Eyring's and Bachiskii's predicted behaviors for homogeneous liquids. The Properties were also measured as a function of time after the liquid was coded from approximately 1173 or 1123 to 823 K. No relaxation phenomena were observed in the properties after the temperature of liquid Te was decreased to 823 K, in contrast to the relaxation behavior observed for some of the Te compounds.

Li, C.↗

Three-dimensionally modulated anisotropic structure for diffractive optical elements created by one-step three-beam polarization holographic photoalignment

A diffractive optical element with a three-dimensional liquid crystal (LC) alignment structure for advanced control of polarized beams was fabricated by a highly efficient one-step photoalignment method. This study is of great significance because different two-dimensional continuous and complex alignment patterns can be produced on two alignment films by simultaneously irradiating an empty glass cell composed of two unaligned photocrosslinkable polymer LC films with three-beam polarized interference beam. The polarization azimuth, ellipticity, and rotation direction of the diffracted beams from the resultant LC grating widely varied depending on the two-dimensional diffracted position and the polarization states of the incident beams. These polarization diffraction properties are well explained by theoretical analysis based on Jones calculus.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomically precise lateral modulation of a two-dimensional electron liquid in anatase TiO 2 thin films

Engineering the electronic band structure of two-dimensional electron liquids (2DELs) confined at the surface or interface of transition metal oxides is key to unlocking their full potential. Here we describe a new approach to tailoring the electronic structure of an oxide surface 2DEL demonstrating the lateral modulation of electronic states with atomic scale precision on an unprecedented length scale comparable to the Fermi wavelength. To this end, we use pulsed laser deposition to grow anatase TiO 2 films terminated by a (1 x 4) in-plane surface reconstruction. Employing photo-stimulated chemical surface doping we induce 2DELs with tunable carrier densities that are confined within a few TiO 2 layers below the surface. Subsequent in situ angle resolved photoemission experiments demonstrate that the (1 x 4) surface reconstruction provides a periodic lateral perturbation of the electron liquid. Furthermore, this causes strong backfolding of the electronic bands, opening of unidirectional gaps and a saddle point singularity in the density of states near the chemical potential.

36 MATERIALS SCIENCE↗

Atomic Cluster Aggregates in Nucleation of Solid Alumina Inclusion in the Aluminum Deoxidation for Liquid Iron

Nucleation plays a decisive role in determining the structure and size distribution of a solid inclusion particle in liquid iron. The literature does not yet provide a clear picture about the pathway leading to solid alumina inclusion from liquid iron. The main confusion surrounds the little-known structures and thermodynamic properties of metastable alumina phase (MAP) that appear in the nucleation of alumina inclusion. In this work, it is suggested that MAP could appear in the Al-deoxidation reaction, based on the summaries and analysis in terms of various equilibrium experimental results and thermodynamic modeling of the Al deoxidation in liquid iron since the 1950s. The structures and thermodynamic properties of a species of MAP, alumina atomic cluster aggregates (AACAs), are calculated by density functional theory (DFT) methods. The thermodynamics on formation and transformation of AACAs shows that AACAs are in equilibrium with Al and O with various contents measured in the Al-deoxidation equilibrium experiments for liquid iron. It is suggested that the residual Al and O, which cannot nucleate, appear in the form of AACAs in Al-deoxidized liquid iron. It can be concluded that AACAs are the metastable intermediates and structural units for alumina inclusion nucleating from liquid iron. Thus, the behaviors of AACAs are important to the control of the nucleation rate of alumina inclusions in the Al deoxidation for liquid iron.

36 MATERIALS SCIENCE↗

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

CO 2 capture requires materials with high adsorption selectivity and an industrial ease of implementation. To address these needs, a new class of porous materials was recently developed that combines the fluidity of solvents with the porosity of solids. Type 3 porous liquids (PLs) composed of solvents and metal–organic frameworks (MOFs) offer a promising alternative to current liquid carbon capture methods due to the inherent tunability of the nanoporous MOFs. However, the effects of MOF structural features and solvent properties on CO 2 –MOF interactions within PLs are not well understood. Herein experimental and computational data of CO 2 gas adsorption isotherms were used to elucidate both solvent and pore structure influences on ZIF-based PLs. The roles of the pore structure including solvent size exclusion, structural environment, and MOF porosity on PL CO 2 uptake were examined. A comparison of the pore structure and pore aperture was performed using ZIF-8, ZIF-L, and amorphous-ZIF-8. Adsorption experiments here have verified our previously proposed solvent size design principle for ZIF-based PLs (1.8× ZIF pore aperture). Furthermore, the CO 2 adsorption isotherms of the ZIF-based PLs indicated that judicious selection of the pore environment allows for an increase in CO 2 selectivity greater than expected from the individual PL components or their combination. This nonlinear increase in the CO 2 selectivity is an emergent behavior resulting from the complex mixture of components specific to the ZIF-L + 2'-hydroxyacetophenone-based PL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗