Search NASA⌕ Search

SEARCH · Search NASA

Results for “Information processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

A Scalable Readout for Microwave SQUID Multiplexing of Transition-Edge Sensors

The readout requirements for instruments based on transition-edge sensors (TESs) have dramatically increased over the last decade as demand for systems with larger arrays and faster sensors has grown. Emerging systems are expected to contain many thousands of sensors and/or sensors with time constants as short as 100 ms. These requirements must be satisfied while maintaining low noise, high dynamic range, and low crosstalk. A promising readout candidate for future TES arrays is the microwave SQUID multiplexer, which offers several gigahertz of readout bandwidth per pair of coaxial cables. In microwave SQUID multiplexing, sensor signals are coupled to RF-SQUIDs embedded in superconducting microwave resonators, which are probed via a common microwave feedline and read out using gigahertz signals. This form of SQUID multiplexing moves complexity from the cryogenic stages to room temperature hardware and digital signal processing firmware which must synthesize the microwave tones and process the information contained within them. To demultiplex signals from the microwave SQUID multiplexer, we have implemented an FPGA-based firmware architecture that is flexible enough to read out a variety of differently optimized TESs. A gamma-ray spectrometer targeted at nuclear materials accounting applications, known as SLEDGEHAMMER, is an early adopter of microwave SQUID multiplexing and is driving our current firmware development effort. This instrument utilizes 300 kHz full-width half-maximum resonators with 256 channels in a one gigahertz wide band. We have recently demonstrated undegraded readout of 128 channels using two ROACH2s on a single pair of coaxial cables. This manuscript describes the firmware implementation for the readout electronics of these early array-scale demonstrations.

42 ENGINEERING↗

Information-theoretic discrepancy based iterative reconstructions (IDIR) for polychromatic x-ray tomography

Purpose: X-ray photons generated from a typical x-ray source for clinical applications exhibit a broad range of wavelengths, and the interactions between individual particles and biological substances depend on particles' energy levels. Most existing reconstruction methods for transmission tomography, however, neglect this polychromatic nature of measurements and rely on the monochromatic approximation. In this study, we developed a new family of iterative methods that incorporates the exact polychromatic model into tomographic image recovery, which improves the accuracy and quality of reconstruction.Methods: The generalized information-theoretic discrepancy (GID) was employed as a new metric for quantifying the distance between the measured and synthetic data. By using special features of the GID, the objective function for polychromatic reconstruction which contains a double integral over the wavelength and the trajectory of incident x-rays was simplified to a paraboloidal form without using the monochromatic approximation. More specifically, the original GID was replaced with a surrogate function with two auxiliary, energy-dependent variables. Subsequently, the alternating minimization technique was applied to solve the double minimization problem. Based on the optimization transfer principle, the objective function was further simplified to the paraboloidal equation, which leads to a closed-form update formula. Numerical experiments on the beam-hardening correction and material-selective reconstruction were conducted to compare and assess the performance of conventional methods and the proposed algorithms.Results: The authors found that the GID determines the distance between its two arguments in a flexible manner. In this study, three groups of GIDs with distinct data representations were considered. The authors demonstrated that one type of GIDs that comprises “raw” data can be viewed as an extension of existing statistical reconstructions; under a particular condition, the GID is equivalent to the Poisson log-likelihood function. The newly proposed GIDs of the other two categories consist of log-transformed measurements, which have the advantage of imposing linearized penalties over multiple discrepancies. For all proposed variants of the GID, the aforementioned strategy was used to obtain a closed-form update equation. Even though it is based on the exact polychromatic model, the derived algorithm bears a structural resemblance to conventional methods based on the monochromatic approximation. The authors named the proposed approach as information-theoretic discrepancy based iterative reconstructions (IDIR). In numerical experiments, IDIR with raw data converged faster than previously known statistical reconstruction methods. IDIR with log-transformed data exhibited superior reconstruction quality and faster convergence speed compared with conventional methods and their variants.Conclusions: The authors' new framework for tomographic reconstruction allows iterative inversion of the polychromatic data model. The primary departure from the traditional iterative reconstruction was the employment of the GID as a new metric for quantifying the inconsistency between the measured and synthetic data. The proposed methods outperformed not only conventional methods based on the monochromatic approximation but also those based on the polychromatic model. The authors have observed that the GID is a very flexible means to design an objective function for iterative reconstructions. Hence, the authors expect that the proposed IDIR framework will also be applicable to other challenging tasks.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The role of information structures in game-theoretic multi-agent learning

Multi-agent learning (MAL) studies how agents learn to behave optimally and adaptively from their experience when interacting with other agents in dynamic environments. The outcome of a MAL process is jointly determined by all agents’ decision-making. Hence, each agent needs to think strategically about others’ sequential moves, when planning future actions. The strategic interactions among agents makes MAL go beyond the direct extension of single-agent learning to multiple agents. With the strategic thinking, each agent aims to build a subjective model of others decision-making using its observations. Such modeling is directly influenced by agents’ perception during the learning process, which is called the information structure of the agent’s learning. As it determines the input to MAL processes, information structures play a significant role in the learning mechanisms of the agents. This review creates a taxonomy of MAL and establishes a unified and systematic way to understand MAL from the perspective of information structures. Here we define three fundamental components of MAL: the information structure (i.e., what the agent can observe), the belief generation (i.e., how the agent forms a belief about others based on the observations), as well as the policy generation (i.e., how the agent generates its policy based on its belief). In addition, this taxonomy enables the classification of a wide range of state-of-the-art algorithms into four categories based on the belief-generation mechanisms of the opponents, including stationary, conjectured, calibrated, and sophisticated opponents. We introduce Value of Information (VoI) as a metric to quantify the impact of different information structures on MAL. Finally, we discuss the strengths and limitations of algorithms from different categories and point to promising avenues of future research.

97 MATHEMATICS AND COMPUTING↗

Hybrid Oscillator-Qubit Quantum Processors: Instruction Set Architectures, Abstract Machine Models, and Applications

This tutorial offers a pedagogical guide to hybrid quantum processors that integrate discrete-variable (DV) qubits and continuous-variable (CV) oscillators. Aimed at computer scientists, engineers, and physicists, it provides an overview of the experimental, algorithmic, and architectural aspects of this novel and rapidly developing hardware model. Experimental realizations of this model include superconducting, trapped-ion, and neutral-atom platforms. By combining DV and CV components, hybrid oscillator-qubit processors enable a powerful new paradigm that offers complementary strengths for quantum control, error correction, computation, and simulation. Working toward the goal of a full-stack system connecting applications to CV-DV hardware, we define and formulate abstract machine models and instruction set architectures. These essential abstractions enable codesign of hardware and software, and resource estimation for exploring the potential of current and future hardware for computational and simulation tasks. Using these abstractions, we present both new and existing examples that illustrate the benefits of hybrid CV-DV processors relative to traditional DV-only hardware in computation as well as quantum simulation of physical models. Examples include algorithms for transferring states between DV and CV systems, performing the quantum Fourier transform, and simulation of lattice gauge theories. Relative to qubit-only hardware, the bosonic degrees of freedom natively available in hybrid architectures can substantially reduce the circuit complexity of simulations for physical models containing bosons. A key technique is the extension of quantum signal processing ideas to CV-DV systems. This work is intended to serve as a timely and comprehensive guide to this relatively unexplored yet promising approach to quantum computation and to provide a road map to guide future development.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Variational Optical Phase Learning on a Continuous-Variable Quantum Compiler

Quantum process learning is a fundamental primitive that draws inspiration from machine learning with the goal of better studying the dynamics of quantum systems. One approach to quantum process learning is quantum compilation, whereby an analog quantum operation is digitized by compiling it into a series of basic gates. While there has been significant focus on quantum compiling for discrete-variable systems, the continuous-variable (CV) framework has received comparatively less attention. We present an experimental implementation of a CV quantum compiler that uses two-mode squeezed light to learn a Gaussian unitary operation. We demonstrate the compiler by learning a parameterized linear phase unitary through the use of target and control phase unitaries to demonstrate a factor of 5.4 increase in the precision of the phase estimation and a 3.6-fold acceleration in the time-to-solution metric when leveraging quantum resources. We further show how our approach can be extended to higher-dimensional compilation tasks. Our results are enabled by the tunable control of our cost landscape via variable squeezing, thus providing a critical framework to simultaneously increase precision and reduce time-to-solution.

97 MATHEMATICS AND COMPUTING↗

Anisotropic Excitons Reveal Local Spin Chain Directions in a van der Waals Antiferromagnet

A long‐standing pursuit in materials science is to identify suitable magnetic semiconductors for integrated information storage, processing, and transfer. Van der Waals magnets have brought forth new material candidates for this purpose. Recently, sharp exciton resonances in antiferromagnet NiPS 3 have been reported to correlate with magnetic order, that is, the exciton photoluminescence intensity diminishes above the Néel temperature. Here, it is found that the polarization of maximal exciton emission rotates locally, revealing three possible spin chain directions. This discovery establishes a new understanding of the antiferromagnet order hidden in previous neutron scattering and optical experiments. Furthermore, defect‐bound states are suggested as an alternative exciton formation mechanism that has yet to be explored in NiPS 3 . The supporting evidence includes chemical analysis, excitation power, and thickness dependent photoluminescence and first‐principles calculations. This mechanism for exciton formation is also consistent with the presence of strong phonon side bands. This study shows that anisotropic exciton photoluminescence can be used to read out local spin chain directions in antiferromagnets and realize multi‐functional devices via spin‐photon transduction.

36 MATERIALS SCIENCE↗

Discovery of Calcium-Metal Alloy Anodes for Reversible Ca-Ion Batteries

Ca-ion batteries (CIBs) show promise to achieve the high energy density required by emerging applications like electric vehicles because of their potentially improved capacities and high operating voltages. The development of CIBs is hindered by the failure of traditional graphite and calcium metal anodes due to the intercalation difficulty and the lack of efficient electrolytes. Recently, a high voltage (4.45 V) CIB cell using Sn as the anode has been reported to achieve a remarkable cyclability (>300 cycles). The calciation of Sn is observed to end at Ca 7 Sn 6 , which is surprising, since higher Ca-content compounds are known (e.g., Ca 2 Sn). In our paper, the Sn electrochemical calciation reaction process is investigated computationally and the reaction driving force as a function of Ca content is explored using density functional theory (DFT) calculations. This exploration allows the identification of threshold voltages which govern the limits of the calciation process. This information is then used to design a four-step screening strategy and high-throughput DFT is utilized to search for anode materials with higher properties. Finally, many metalloids (Si, Sb, Ge), (post-)transition metals (Al, Pb, Cu, Cd, CdCu 2 ) are predicted to be promising inexpensive anode candidates and warrant further experimental investigations.

25 ENERGY STORAGE↗

Contextualizing context for synthetic biology - identifying causes of failure of synthetic biological systems

Despite the efforts that bioengineers have exerted in designing and constructing biological processes that function according to a predetermined set of rules, their operation remains fundamentally circumstantial. The contextual situation in which molecules and single-celled or multicellular organisms find themselves shapes the way they interact, respond to the environment and process external information. Since the birth of the field, synthetic biologists have had to grapple with contextual issues, particularly when the molecular and genetic devices inexplicably fail to function as designed when tested in vivo. In this review, we set out to identify and classify the sources of the unexpected divergences between design and actual function of synthetic systems and analyze possible methodologies aimed at controlling, if not preventing, unwanted contextual issues.

59 BASIC BIOLOGICAL SCIENCES↗

Gobbling chronology of eastern wild turkeys in South Carolina

Eastern wild turkeys ( Meleagris gallopavo silvestris ) use a polygynous-promiscuous mating system, wherein males compete for mating opportunities and communicate with females via courtship behaviors. One courtship behavior is vocalization (gobbling), which attracts females and signals dominance to other males. However, temporal variation in gobbling activity may be influenced by external stimuli, environmental variation, and hunter activity. Gobbling activity is a key determinant of hunter satisfaction, and gobbling chronology is often used by state agencies to inform regulatory processes. To identify factors influencing gobbling activity, we evaluated daily gobbling chronology on 3 sites in South Carolina, USA (Webb Wildlife Management Area [WMA] Complex, Savannah River Site, Crackerneck WMA) with different levels of hunter activity.We used autonomous recording units (ARUs; n = 45) across 8,280 days to collect 53,937 hours of ambient sound recordings and identified 68,426 gobbles. Gobbling activity varied daily and site interacting with minutes since sunrise best predicted daily gobbling activity. Furthermore, we noted distinct differences in predicted numbers of gobbles between hunted sites and an unhunted site, suggesting that hunting may be an important determinant of gobbling activity.Across our study sites, we observed that ≥72% of gobbling activity occurred between 30minutes before and 60minutes after sunrise. We found no clear evidence of well-defined unimodal or bimodal peaks in daily or weekly gobbling activity. Across sites, <44% of gobbling activity occurred during legal hunting seasons in South Carolina, with between 30% and 48% of gobbling activity occurring after legal hunting seasons. Because hunter satisfaction is primarily influenced by gobbling activity, wildlife managers in South Carolina may consider adjusting dates of turkey hunting seasons to correspond hunting with periods when most gobbling occurs.

60 APPLIED LIFE SCIENCES↗

Chaos in quantum channels

For this research, we study chaos and scrambling in unitary channels by considering their entanglement properties as states. Using out-of-time-order correlation functions to diagnose chaos, we characterize the ability of a channel to process quantum information. We show that the generic decay of such correlators implies that any input subsystem must have near vanishing mutual information with almost all partitions of the output. Additionally, we propose the negativity of the tripartite information of the channel as a general diagnostic of scrambling. This measures the delocalization of information and is closely related to the decay of out-of-time-order correlators. We back up our results with numerics in two non-integrable models and analytic results in a perfect tensor network model of chaotic time evolution. In conclusion, these results show that the butterfly effect in quantum systems implies the information-theoretic definition of scrambling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Expected Power-Utility Maximization Under Incomplete Information and with Cox-Process Observations

We consider the problem of maximization of expected terminal power utility (risk sensitive criterion). The underlying market model is a regime-switching diffusion model where the regime is determined by an unobservable factor process forming a finite state Markov process. The main novelty is due to the fact that prices are observed and the portfolio is rebalanced only at random times corresponding to a Cox process where the intensity is driven by the unobserved Markovian factor process as well. This leads to a more realistic modeling for many practical situations, like in markets with liquidity restrictions; on the other hand it considerably complicates the problem to the point that traditional methodologies cannot be directly applied. The approach presented here is specific to the power-utility. For log-utilities a different approach is presented in Fujimoto et al. (Preprint, 2012).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Toxicity of Irinotecan-Eluting Beads in the Treatment of Hepatic Malignancies: Results of a Multi-Institutional Registry

PurposeTo evaluate the predictors of toxicity of drug-eluting beads loaded with irinotecan (DEBIRI) in the treatment of hepatic malignancies.Materials and MethodsA total of 330 patients were enrolled in a prospective, open-label, multicenter, multinational, single-arm study administering two types of drug-eluting beads (DEBIRI and drug-eluting beads loaded with doxorubicin). Complications were graded by Cancer Therapy Evaluation Program's Common Terminology Criteria for Adverse Events (CTCAE) version 3.0. All events requiring additional physician treatment or requiring extended hospital stay or readmission within 30 days were included.ResultsA total of 109 patients received 187 DEBIRI treatments (range 1 to 5 per patient). The most common histology was metastatic colorectal cancer in 76% of patients, cholangiocarcinoma in 7% of patients, and other metastatic disease in 17% of patients. There were 35 patients (19%) with irinotecan treatments who sustained 158 treatment-related adverse events, with the median CTCAE event grade being CTCAE grade 2 (range 1 to 5). The most common adverse events were postembolic symptoms (42%). Multivariate analysis identified pretreatment and treatment-related risk factors as follows: lack of pretreatment with hepatic arterial lidocaine (p = 0.005), {>=}3 treatments (p = 0.05), achievement of complete stasis (p = 0.04), treatment with >100 mg DEBIRI in 1 treatment (p = 0.03), and bilirubin >2.0 {mu}g/dl with >50% liver involvement (p = 0.05). These factors were predictive of adverse events and significantly greater hospital length of stay.ConclusionsDEBIRI is safe when appropriate technique and treatment are used. Adverse events can be predicted based on pretreatment- and treatment-related factors, and their occurrence can become part of the informed consent process. Continued standardization of this treatment will lead to fewer adverse events and improved patient quality of life.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Spallation-induced roughness promoting high spatial frequency nanostructure formation on Cr

Interaction of ultrafast laser pulses with metal surfaces in the spallation regime can result in the formation of anisotropic nanoscale surface morphology commonly referred to as laser-induced periodic surface structures (LIPSS) or ripples. The surface structures generated by a single pulse irradiation of monocrystalline Cr samples are investigated experimentally and computationally for laser fluences that produce high spatial frequency nanostructures in the multi-pulse irradiation regime. Electron microscopy reveals distinct response of samples with different crystallographic surface orientations, with (100) surfaces exhibiting the formation of more refined nanostructure by a single pulse irradiation and a more pronounced LIPSS after two laser pulses as compared to (110) surfaces. A large-scale molecular dynamics simulation of laser interaction with a (100) Cr target provides detailed information on processes responsible for spallation of a liquid layer, redistribution of molten material, and rapid resolidification of the target. The nanoscale roughness of the resolidified surface predicted in the simulation features elongated frozen nanospikes, nanorims and nanocavities with dimensions and surface density similar to those in the surface morphology observed for (100) Cr target with atomic force microscopy. The results of the simulation suggest that the types, sizes and dimensions of the nanoscale surface features are defined by the competition between the evolution of transient liquid structures generated in the spallation process and the rapid resolidification of the surface region of the target. The spallation-induced roughness is likely to play a key role in triggering the generation of high-frequency LIPSS upon irradiation by multiple laser pulses.

Materials Science↗

Inverse modeling of ground surface uplift and pressure with iTOUGH-PEST and TOUGH-FLAC: The case of CO2 injection at In Salah, Algeria

Ground deformation, commonly seen in storage projects, carries useful information about processes occurring in the injection formation. The Krechba gas field at In Salah (Algeria) is one of the best-known sites for studying ground surface deformation during geological carbon storage. At this first industrial-scale on-shore CO 2 demonstration project, satellite-based ground-deformation monitoring data of high quality are available and used to study the large-scale hydrological and geomechanical response of the system to injection. In this work, we carry out coupled fluid flow and geomechanical simulations to understand the uplift at three different CO 2 injection wells (KB-501, KB-502, KB-503). Previous numerical studies focused on the KB-502 injection well, where a double-lobe uplift pattern has been observed in the ground-deformation data. The observed uplift patterns at KB-501 and KB-503 have single-lobe patterns, but they can also indicate a deep fracture zone mechanical response to the injection.The current study improves the previous modeling approach by introducing an injection reservoir and a fracture zone, both responding to a Mohr-Coulomb failure criterion. In addition, we model a stress-dependent permeability and bulk modulus, according to a dual continuum model. Mechanical and hydraulic properties are determined through inverse modeling by matching the simulated spatial and temporal evolution of uplift to InSAR observations as well as by matching simulated and measured pressures. The numerical simulations are in agreement with both spatial and temporal observations. The estimated values for the parameterized mechanical and hydraulic properties are in good agreement with previous numerical results. In addition, the formal joint inversion of hydrogeological and geomechanical data provides measures of the estimation uncertainty.

58 GEOSCIENCES↗

Mitigation for one & all: An integrated framework for mitigation of development impacts on biodiversity and ecosystem services

Emerging development policies and lending standards call for consideration of ecosystem services when mitigating impacts from development, yet little guidance exists to inform this process. Here we propose a comprehensive framework for advancing both biodiversity and ecosystem service mitigation. We have clarified a means for choosing representative ecosystem service targets alongside biodiversity targets, identified servicesheds as a useful spatial unit for assessing ecosystem service avoidance, impact, and offset options, and discuss methods for consistent calculation of biodiversity and ecosystem service mitigation ratios. We emphasize the need to move away from area- and habitat-based assessment methods for both biodiversity and ecosystem services towards functional assessments at landscape or seascape scales. Such comprehensive assessments more accurately reflect cumulative impacts and variation in environmental quality, social needs and value preferences. The integrated framework builds on the experience of biodiversity mitigation while addressing the unique opportunities and challenges presented by ecosystem service mitigation. These advances contribute to growing potential for economic development planning and execution that will minimize impacts on nature and maximize human wellbeing. - Highlights: • This is the first framework for biodiversity and ecosystem service mitigation. • Functional, landscape scale assessments are ideal for avoidance and offsets. • Servicesheds define the appropriate spatial extent for ecosystem service mitigation. • Mitigation ratios should be calculated consistently and based on standard factors. • Our framework meets the needs of integrated mitigation assessment requirements.

54 ENVIRONMENTAL SCIENCES↗

On legitimacy in impact assessment: An epistemologically-based conceptualisation

Highlights: • Impact assessment (IA) has lost its roots in provision of reliable evidence. • IA is theoretically position ontologically and epistemologically • Theory is used to examine the understanding of legitimacy and finds it to be inadequate. • Recent political decisions show knowledge is missing from understanding of legitimacy. • Knowledge legitimacy is conceptualised to redress the current misunderstandings. - Abstract: Impact assessment (IA) is carried out as an ex ante process to inform decision-making. It includes requirements for engagement with stakeholders (including the public) regarding actions proposed by a proponent. A key issue with the various stakeholders involved is the perceived legitimacy of the IA, which can have implications both for the reputation of the proponent, and the likelihood of conflict over the decision. But the understanding of legitimacy in the IA literature has changed over time in line with an ontological shift from positivism (that scientifically generated information leads to better informed decisions) to the post-positivist acknowledgement of the limitations of scientific method whereby assumptions must be subject to transparency, deliberation and openness. This has led to an epistemological shift towards greater subjectivism which, we suggest, has created new opportunities (which have been realised in political decision-making) to subvert knowledge through the increased use of the Internet and social media. To address the potential for such subversion of legitimacy, we seek to conceptualise legitimacy in the IA context through framing IA around a critical realist ontology and a reliabilist virtue epistemology. This allows us to identify ‘knowledge legitimacy’ as an equally important component of IA legitimacy along with organisational legitimacy. We conceptualise knowledge legitimacy through literature review drawing on rich understandings of knowledge from IA and other fields of research in order to develop a four-dimensional typology. This includes the dimensions of: knowledge accuracy; knowledge restriction; knowledge diffusion; and knowledge spectrum. This is the first theoretically grounded attempt to understand legitimacy in IA. It is hoped that it will provoke discussion in the IA community to further advance theoretical understandings of IA and legitimacy of practice.

54 ENVIRONMENTAL SCIENCES↗

Siting bioenergy facilities in the United States: Measuring participation in decisions and distribution of effects

Scientists and stakeholders can inform the process of siting renewable energy facilities in ways that do not perpetuate socioeconomic disparities associated with fossil fuel industries or create new ones. Procedural justice indicators and distributional justice indicators that incorporate environmental, social, and economic objectives can be used to site energy facilities in ways that increase benefits and reduce negative impacts to disadvantaged and underserved populations. A generic list of potential energy justice indicators for siting bioenergy facilities was developed collaboratively between U.S. bioenergy researchers and diverse agriculture, energy, and energy and environmental justice stakeholders and experts. From this list smaller numbers of indicators can be selected or modified with communities for local siting of bioenergy facilities. Groups of indicators can be used to guide biorefinery or biopower siting and permitting decisions, e.g., to compare siting options, to draw early attention to key problems, or to track progress toward justice-related targets.

09 BIOMASS FUELS↗

Gas hydrate deposit formation in transient flowloop tests and mitigation with a surface treatment

Thermodynamic and thermal mitigation strategies are traditionally utilized to prevent gas hydrate formation but may be rendered ineffective for certain unplanned, extended shut-in scenarios. Unfortunately, the current knowledge regarding transient gas hydrate formation has been extremely limited to only a few studies and unable to address this complex issue adequately. This work, conducted in a lab-scale flowloop, aims to add to the understanding of this area by delving into the implications of transient conditions on gas hydrate formation mechanisms, while also exploring a possible mitigation strategy of a surface treatment. Specifically, the effects of phase separation on gas hydrate formation locations, transportability, and plugging are presented for an oil-dominated system. An omniphobic surface treatment is shown to affect initial gas hydrate deposition and its wall adherence strength, as well as the overall plugging outcome. Overall, this work combines observational information with process data measurements to provide a better understanding of phase separated gas hydrate systems and passive deposition mitigation strategies. This can further aid advanced gas hydrate modeling efforts, which currently do not adequately address transient flow effects on phase separation/dispersion. Here, it offers representative gas hydrate testing for coatings, which have exclusively been limited to non-flowing and/or bench-scale analysis, to give confidence in their potential application as advanced deposition prevention tools.

03 NATURAL GAS↗