Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS), phase 1

The large-signal behaviors of a regulator depend largely on the type of power circuit topology and control. Thus, for maximum flexibility, it is best to develop models for each functional block a independent modules. A regulator can then be configured by collecting appropriate pre-defined modules for each functional block. In order to complete the component model generation for a comprehensive spacecraft power system, the following modules were developed: solar array switching unit and control; shunt regulators; and battery discharger. The capability of each module is demonstrated using a simplified Direct Energy Transfer (DET) system. Large-signal behaviors of solar array power systems were analyzed. Stability of the solar array system operating points with a nonlinear load is analyzed. The state-plane analysis illustrates trajectories of the system operating point under various conditions. Stability and transient responses of the system operating near the solar array's maximum power point are also analyzed. The solar array system mode of operation is described using the DET spacecraft power system. The DET system is simulated for various operating conditions. Transfer of the software program CAMAPPS (Computer Aided Modeling and Analysis of Power Processing Systems) to NASA/GSFC (Goddard Space Flight Center) was accomplished.

Kim, S.↗
NASA NTRS2018

Solar Irradiance Variability, Influenced by r Modes

A spectrum of the four-decade solar irradiance record has a prominent cluster of power for periodicities near 1 yr. Correlating irradiance with a bandpass filter showed that periodicity values were not constant, but varied sinusoidally with each cycle lasting 14 ± 1 yr. The large modulation amplitude makes solar frequencies ≥1 yr(exp −1) hard to detect at the solar surface. After removing the modulation, a Lomb–Scargle spectrum exposed two true periodicities: 1.006 and 0.920 yr. They are interpreted as the synodic rotation periods of r modes of lowest angular degree (ℓ = 1). The first propagates in the stable interior and the second in the convective envelope perturbed by its several flow fields. The rotational beat period of the two modes is about 10.9 yr. This is close to the average length of a solar cycle and possibly controls this average. The 1.006 yr periodicity dominates most of the filtered irradiance record but an abrupt change to about 0.8 yr occurs in mid-2010. Also found was evidence for higher-degree r modes (ℓ = 2 to 8) and a curious sawtooth modulation with a recurrence period of 2.6 yr.

Wolff, Charles L.↗
NASA NTRS1975

A dynamic model for the time evolution of the modulated cosmic ray spectrum

A recently developed model predicts an energy dependent phase lag in the modulated cosmic ray density U(t) given by U(t) approximately equal to US (t - tau) where US is the solution to the Fokker-Planck equation under time independent conditions and tau is the average time spent by particles inside the modulating region. The delay times tau are functions of modulating parameters R (the radius of the modulating cavity), V (the solar wind velocity), and K (the effective average diffusion-coefficient which is a function of energy). This model is applied to predict the time evolution of the modulated cosmic ray proton spectrum over a simulated solar cycle. A modulation produced mostly by varying R over the solar cycle is less consistent with the observations.

Ogallagher, J. J.↗
DOE OSTI2015

TIME DEPENDENCE OF THE e{sup −} FLUX MEASURED BY PAMELA DURING THE 2006 JULY–2009 DECEMBER SOLAR MINIMUM

Precision measurements of the electron component of cosmic radiation provide important information about the origin and propagation of cosmic rays in the Galaxy not accessible from the study of cosmic-ray nuclear components due to their differing diffusion and energy-loss processes. However, when measured near Earth, the effects of propagation and modulation of Galactic cosmic rays in the heliosphere, particularly significant for energies up to at least 30 GeV, must be properly taken into account. In this paper the electron (e{sup −}) spectra measured by the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics down to 70 MeV from 2006 July to 2009 December over six-month time intervals are presented. Fluxes are compared with a state-of-the-art three-dimensional model of solar modulation that reproduces the observations remarkably well.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Solar Steam on Demand

INTRODUCTION: This Report summarizes the research and development project performed by Sunvapor and the subrecipient National Renewable Energy Laboratory (NREL) during the period of 10/01/2018-9/30/2021. The work was aimed at the economic integration of solar steam with an industrial process, and in particular, the advantages that a novel type of thermal energy storage and collector design could bring to the system. The completed work includes experimental research on the storage material, design of the collector, engineering of a complete solar steam plant, and economic analysis. The plant was, in the end, not constructed, due to COVID-19 impacts to the project host. PURPOSE: The purpose of the project was to test the hypothesis that a levelized cost of heat (LCOH) of 2¢/kWh delivered to a steam-consuming process, including energy discharged from storage, could be feasibly achieved. PROJECT OBJECTIVES: For Budget Period 1 our objectives were to engineer a prototype industrial solar steam generation system, and design and test a Latent Heat Energy Storage (LHES) lab-scale system. For Budget Period 2 our objectives were to construct and test the solar steam prototype plant, and to build and factory-test a full LHES module. For Budget Period 3 our objective was to integrate the storage module with the solar steam generator, show successful long duration energy tests of the combined system, and use the results to project the LCOH of delivered steam to a second-generation plant. PROJECT OUTCOMES: Various phase change materials (PCMs) for the LHES were tested for compatibility with industrial steam uses as measured by phase change temperature, stability of latent heat of fusion, and their corrosive effects on steel (the heat exchanger material). Two of these materials (sodium formate and sodium/ potassium) showed potential to meet the technical criteria. The estimated cost of a complete LHES module with these materials did not meet economic targets. The developmental collector design builds from previous work to exploit the potential cost advantages of a spaceframe of lumber construction. Design improvements were achieved in assembly efficiency and structural performance. A complete engineering package was completed for the solar steam system without storage that included the developmental as well as commercial arrays. The plant was permitted for construction. The storage CAPEX for a reference plant was estimate to be greater than $\$ 57$/kWh. The LCOH of the system without storage and with developmental collectors of lumber construction was projected to be 2¢/kWh, assuming a FCR of 8.2% over thirty years. PROJECT MILESTONES: The Milestones fully achieved in the first Budget Period includes obtaining a Letter of Intent from an industrial steam-consuming project host, issuance of a construction permit, and corrosion resistance. The Milestone that was partly achieved was the degradation in the latent heat of fusion. Milestones associated with Budget Periods 2 and 3, related to the construction and operation of the plant were not achieved as a result of the host shutting down the plant due to COVID-19 impacts. CONCLUSIONS: Sunvapor was able to secure an agreement with a host to build a fully engineered and permitted solar steam plant that met the host’s economic goals. As a basis for comparison, the solar field design was comprised of eight commercial collector arrays and one developmental Green Parabolic Trough Collector (GPTC) array. The projected LCOH with a solar field entirely populated with a second generation GPTC met the goal of 2¢/kWh. The experimental program concerning the PCM indicated the feasibility of meeting their technical requirements for industrial steam uses. The cost of the complete LHES exceeded its $\$ 14$/kWh target, and therefore the inclusion of LHES could not be economically justified. Due to COVID-19 impacts on the host, the solar steam plant was not constructed.

14 SOLAR ENERGY↗
NASA NTRS1990

A solar power system for an early Mars expedition

As NASA looks at missions that will expand human presence in the solar system, the power requirements for such missions need to be defined, developed and analyzed. One mission under consideration consists of a 40 day manned Mars surface expedition to perform science experiments. The mission time was centered around an aerocentric longitude (Ls) of 90 deg to lessen the probability of an occurrence of a local or planetary dust storm. The mission site was arbitrarily located at the Martian equator. The power requirements were assumed to be 40 kWe for life support and experiment power during the Martian day and 20 kWe for life support during the Martian night. A solar energy system consisting of roll-out amorphous silicon arrays and a hydrogen-oxygen regenerative fuel cell energy storage system was chosen for the study. The power available from a roll-out array, when plotted against time, approaches a cosine-like curve and depends on both array area and the amount of solar irradiance impinging on its horizontal surface. The array is sized to provide at least 20 KWe when the sun is 12.5 deg above the horizon and ramp up to 140 kWe peak power at Martian noon. In this configuration, the array is capable of supplying 40 KWe continuously to the user for the majority of the Martian day while supplying the excess energy to the electrolyzer portion of the energy storage system. A roll-out, pumped loop radiator system is used to dissipate the waste heat produced by the fuel cell. The power management and distribution system inverts the power from the individual solar array sub-modules and the fuel cell stacks and connects them to a 440 VAC single phase 20 kHz main bus. The total power system is comprised of 80 individual solar array modules with an integral bus and three energy storage modules consisting of fuel cell and electrolyzer stacks, reactant storage tanks, and a roll-out radiator. Power system mass, stowed volume, and deployed area were determined. Day/night power splits of 40/10 kWe, 40/30 kWe, and 40/40 kWe were also considered to determine the impact of a range of nighttime power requirements on the baseline system.

Mckissock, Barbara I.↗
DOE OSTI2017

Mitigation of Dust Impact on Solar Collectors by Water-Free Cleaning With Transparent Electrodynamic Films: Progress and Challenges

Energy-yield loss caused by soiling of photovoltaic modules and concentrated solar power (CSP) mirrors in utility- scale power plants installed in semiarid lands and deserts would result in unsustainable demands for fresh water needed for clean- ing. This paper reviews the progress of the electrodynamic screen (EDS) film technology for frequent water-free cleaning with low- energy requirements. Results presented here, based on laboratory- scale EDS-film-laminated solar panel cleaning, show that the output power can be restored higher than 95% of the initial power under clean conditions. For solar mirrors, the specular reflection efficiency can be maintained over 90% ensuring high efficiency of the CSP plants. Operation of the EDS film for main- taining high optical efficiency of solar collectors requires less than 0.2 Wh/ma 2 /cleaning cycle. Here, principles, optical modeling, construc- tion, lamination of the EDS films on modules and mirrors, and experimental data showing optical efficiency restoration without water consumption are presented. Lastly, current challenges in developing electrodes that would meet optical and conduction properties

14 SOLAR ENERGY↗
DOE OSTI2026

Open-Air Manufacturing of Efficient Large-Area Perovskite Solar Cells to Meet Stability and Cost Targets

This SETO-funded project (DE-EE0009516) developed a fully open-air manufacturing pathway for perovskite solar cells and modules, eliminating vacuum-based processing steps while improving device stability. Open-air ultrasonic spray deposition, solution combustion synthesis, rapid thermal processing, and atmospheric plasma curing were developed and optimized for all functional device layers — perovskite absorber, hole transport layers (HTLs), electron transport layers (ETLs), transparent conducting oxides (TCOs), and rear electrodes — without reliance on vacuum. Sprayed organic ETLs preserved perovskite crystal structure and enabled power conversion efficiencies exceeding 20%, and open-air processed TCOs and rear electrodes achieved optoelectronic performance comparable to sputtered alternatives at substantially lower manufacturing cost. Device stability was assessed through accelerated aging protocols aligned with IEC and ISOS standards, combined with high-throughput optical diagnostics that identified key degradation mechanisms and antagonistic interactions among heat, humidity, and illumination stressors. A comprehensive technoeconomic analysis quantified the cost and throughput advantages of open-air manufacturing over conventional vacuum-based processes, identifying vacuum deposition as the dominant cost driver and demonstrating a clear pathway toward the $0.02/kWh target. The project produced five peer-reviewed journal publications, eleven conference presentations, two patents/applications, and five Ph.D. dissertations.

14 SOLAR ENERGY↗
DOE OSTI2023

Thermal behaviors of ethylene vinyl acetate encapsulants in fielded silicon photovoltaic modules

Aging of silicon photovoltaic (PV) module packaging is one of the greatest limiters of PV module service lifetimes. Module characterization typically focuses on power degradation metrics, which do not convey the complexities of often simultaneous degradation mechanisms. In this work, PV modules with pristine references and known fielding histories were investigated by non-destructive and destructive methods. Modules from Canadian Solar, Mission Solar, and Hanwha Q-Cells were fielded for up to three years; select modules were removed from fielding each year for coring to allow for characterization of the encapsulant. Modules are commonly encapsulated with two protective layers of partially-crystalline ethylene vinyl acetate (EVA) polymer that must undergo a crosslinking reaction to achieve desired properties. The extent of crystallinity of the encapsulants as studied by differential scanning calorimetry showed differences between manufacturers and over time. Some encapsulants showed different magnitudes of crystal sizes which changed after fielding; encapsulants with the monodisperse crystal sizes did not change with fielding. This is due to differences in thermal history. In conclusion, these results have implications for stress development during module aging, since EVA crystal melting and crosslinking reactions can result in encapsulant density changes.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Thin film module development

The design of ARCO Solar, Inc.'s Genesis G100 photovoltaic module was driven by several criteria, including environmental stability (both electrical and mechanical), consumer aesthetics, low materials costs, and manufacturing ease. The module circuitry is designed as a 12 volt battery charger, using monolithic patterning techniques on a glass superstrate. This patterning and interconnect method proves amenable to high volume, low cost production throughput, and the use of glass serves the dual role of handling ease and availability. The mechanical design of the module centers on environmental stability. Packaging of the glass superstrate circuit must provide good resistance to thermal and humidity exposure along with hi-pot insulation and hailstone impact resistance. The options considered are given. Ethylene vinyl acetate (EVA) is chosen as the pottant material for its excellent weatherability.

Jester, T.↗
NASA NTRS1989

Structural configuration options for the Space Station Freedom solar dynamic radiator

In order to meet the growing power demands of the Space Station, the electrical power system design includes an option to provide additional power capability in increments of 50 kWe of power. Each increment consists of a pair of two solar dynamic power modules (SDPMs), each of which containing a closed Brayton Cycle (CBC) thermodynamic engine. A solar dynamic radiator (SDR) enables the CBC to reject the waste heat to the surrounding space environment. This paper analyzes three alternatives to the baseline configuration of the Space Station Freedom solar dynamic radiator and discusses their merits based on Space Shuttle cargo capabilities, location with respect to the SDPM supporting structure, thermal performance, drag, concentrator shading, mass, and other issues of concenrn. Results indicating the advantages and disadvantages of each option are presented along with diagrams of the alternative configurations.

Tylim, Adrian↗
NASA NTRS2002

SMEX-Lite Modular Solar Array Architecture

The NASA Small Explorer (SMEX) missions have typically had three years between mission definition and launch. This short schedule has posed significant challenges with respect to solar array design and procurement. Typically, the solar panel geometry is frozen prior to going out with a procurement. However, with the SMEX schedule, it has been virtually impossible to freeze the geometry in time to avoid scheduling problems with integrating the solar panels to the spacecraft. A modular solar array architecture was developed to alleviate this problem. This approach involves procuring sufficient modules for multiple missions and assembling the modules onto a solar array framework that is unique to each mission. The modular approach removes the solar array from the critical path of the SMEX integration and testing schedule. It also reduces the cost per unit area of the solar arrays and facilitates the inclusion of experiments involving new solar cell or panel technologies in the SMEX missions.

Lyons, John W.↗
NASA NTRS2005

Solar Wind Fluctuations and Their Consequences on the Magnetosphere

Efforts have been made to extract the physical meaning of each term in our prediction model of the Dst index using the solar wind as the only input. The work has been published Journal of Geophysical Research (Temerin and Li, 21002). We found different terms in the model representing different current in the magnetospheric system and each current has different rise and decay times, with the symmetric ring current the slowest, then the partial ring current, then the tail current. We also have been trying to understand the physical meaning of the diffusion coefficient used in our prediction model of relativistic electron fluxes at geostationary orbit. The model reproduced the observations of MeV electron flux variations well, the diffusion coefficient had be assumed only die to local magnetic field fluctuations, leading to its 10th power dependence on the L. We have studied the theoretical derivation of the diffusion coefficient and we believe that the effect electric field fluctuations at smaller L could become more significant. We have expanded our previous radiation belt electron prediction model, which predicted MeV electron geosynchronous orbit based on solar wind measurements, to predict MeV electrons inside geosynchronous orbit. The model results are compared with measurements from Polar/CEPPAD. Prediction efficiencies of 0.56 and 0.54, respectively, at L=6 and L=4, have been achieved over the entire year of 1998. This work wa reported at 2003 Fall AGU and has been accepted for publication in Space Weather (Barker et al., 2005). We also have used simultaneous measurements of the upstream solar wind and of energetic electrons at geosynchronous orbit to analyze the response of electrons over a very wide energy range, 50 keV-6MeV, to solar wind variations. Enhancements of energetic electron fluxes over this whole energy range are modulated by the solar wind speed and the polarity of the interplanetary magnetic field (IMF). The solar wind speed seems to be a dominant controlling parameter for electrons of all energy. This work has been published in Space Weather (Li et al., 2005).

Li, Xin-Lin↗
DOE OSTI2019

Field testing of a spectrum-splitting transmissive concentrator photovoltaic module

Hybrid photovoltaic-thermal systems can decouple IR light from visible light, allowing it to be collected separately by spectrum-optimized mechanisms for increased total efficiency. To demonstrate this, we have designed and prototyped a transmissive spectrum-splitting concentrator photovoltaic module that maximizes solar energy conversion by utilizing the entire solar spectrum. The system first collects visible light using IR-transmissive triple-junction photovoltaic cells to achieve an in-band module efficiency of η m I B = 34.7% for light of wavelengths λ < 870 nm. Simultaneously, 58.8% of light with λ > 870 nm is transmitted through the cells for collection by a thermal receiver. By combining electrical and thermal power collection, 75% of incident solar power is collected, far surpassing the collection capability of only photovoltaics. The module was tested on a dual-axis tracked parabolic concentrator dish at up to 160 suns for 60 cumulative on-sun hours while maintaining photovoltaic cell temperatures at an average of 50 °C via active cooling. The system performed as expected based on modeled values, and represents a cost-effective path forward for dual-generation of electricity and high-temperature heat with increased total efficiency. The capability is valuable in a wide range of commercial and industrial cogeneration applications.

14 SOLAR ENERGY↗
DOE OSTI2019

Modulations of the cosmic muon signal in ten years of Borexino data

We have measured the flux of cosmic muons in the Laboratori Nazionali del Gran Sasso at 3800\,m\,w.e. to be (3.432±0.003)∙10 -4 m -2 s -1 based on ten years of Borexino data acquired between May 2007 and May 2017. A seasonal modulation with a period of (366.3±0.6)d and a relative amplitude of (1.36±0.04)% is observed. The phase is measured to be (181.7±0.4)d, corresponding to a maximum at the 1st of July. Using data inferred from global atmospheric models, we show the muon flux to be positively correlated with the atmospheric temperature and measure the effective temperature coefficient α T =0.90±0.02. The origin of cosmic muons from pion and kaon decays in the atmosphere allows to interpret the effective temperature coefficient as an indirect measurement of the atmospheric kaon-to-pion production ratio rK/π=0.11 +0.11 -0.07 for primary energies above 18TeV. We find evidence for a long-term modulation of the muon flux with a period of ~3000d and a maximum in June 2012 that is not present in the atmospheric temperature data. A possible correlation between this modulation and the solar activity is investigated. The cosmogenic neutron production rate is found to show a seasonal modulation in phase with the cosmic muon flux but with an increased amplitude of (2.6±0.4)%.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

Magnetic measurements of the solar wind interaction with the moon

The magnetic signature of the interaction between the moon and the solar wind (as observed by the Apollo 15 subsatellite) is an enhanced field directly behind the moon, bounded on either side by two dips in the field strength. On occasion, compressions of the field strength are observed external to either one or sometimes both of these dips. Theories of the interaction postulate either that these compressions are a general feature of the solar wind-moon interaction modulated by changes in the solar wind parameters or that they are associated with the appearance of specific lunar regions at the limbs. The measurements of the lunar magnetic field with the Apollo 15 and 16 subsatellites, the mapping of projected source positions of limb compressions onto the lunar surface, and the study of the persistence of limb compressions supports the hypothesis that limb compressions are formed when regions of high magnetization are at the lunar limbs.

Lichtenstein, B. R.↗
DOE OSTI2022

A New Low-Temperature Approach for Efficient and Low-Cost Group V Doping in CdTe Thin Film Solar Cells (Final Technical Report)

The goal of this project is to develop a highly efficient low-temperature ex-situ Group V diffusion doping approach in the CdCl 2 treated polycrystalline CdTe film using the group V chlorides (i.e., PCl 3 , AsCl 3 , SbCl 3 , and BiCl 3 ) as dopants source. For the first time, our innovative doping strategies through the low-temperature ex-situ Group V doping process in polycrystalline CdSeTe successfully demonstrated a promising power conversion efficiency of ~19% compared to the Cu-doped counterparts. Our newly developed low-temperature ex-situ group V doping allows dedicated control of group V diffusion amount, generates a desirable depth profile, and is completely compatible with commercial CdTe module manufacturing. We built the partnership with the largest CdTe solar module manufacturing in the US, e.g., First Solar, Inc to further develop these low-temperature diffusion doped CdSeTe solar cells. Our technology was granted US Patent No. US11257977B2. In this project, we systematically investigate and characterize the new ex-situ group V doping mechanisms, defect chemistry, microstructure, and device physics in CdTe solar cells by combining experimental and theoretical means to pave the way to achieve lower cost toward $\$$0.02/kWh and higher power conversion efficiency (PCE) toward 25% in polycrystalline CdTe solar technology. This project will benefit the public by providing more affordable solar electricity and provide an effective way to address climate change.

14 SOLAR ENERGY↗
NASA NTRS1973

Cosmic-ray propagation and modulation in the interplanetary medium

An attempt is made to show the present state of the observations and theories relevant to the modulation within the solar cavity of galactic cosmic rays with kinetic energies in the range 10 MeV to 10 GeV. In particular it is shown that the modulation of electrons, protons, and helium nuclei over the last half-solar-cycle can well be reproduced with current models, and the radial gradients and anisotropics associated with these models are shown. The origin within the energy spectrum of the low energy particles and their properties is discussed, as well as the verification of energy loss processes.

Gleeson, L. J.↗