Search NASA⌕ Search

SEARCH · Search NASA

Results for “error fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Simulations of Large-Scale Zero Boiloff, Densification, and Solidification of Hydrogen

An Integrated Refrigeration and Storage (IRAS) experimental system called the Ground Operations and Demonstration Unit for Liquid Hydrogen (GODU-LH2) demonstrated the ability store cryogens in a zero boiloff (ZBO) process, and to densify liquid hydrogen by reducing the temperature and pressure down to the triple point resulting in solidification. The incompressible Navier-Stokes was utilized to simulate ZBO, densification, and solidification of liquid hydrogen (LH2) in the IRAS tank. The simulations were performed using a commercially available Computational Fluid Dynamics (CFD) pressure-based mass and momentum flow model and an enthalpy-porosity energy model. Results demonstrated the simulation’s ability to predict time-dependent flow and temperature fields and solid-liquid phase locations for hydrogen during ZBO, densification, and solidification. The simulations showed good agreement with experimental data, with errors within acceptable ranges for temperature and pressure predictions, provided detailed insights into natural convection and solid-liquid phase change dynamics. These findings are critical for the design of future cryogenic fluid management systems.

Computational Fluid Dynamics↗

Development and Validation of a High-Vacuum Thermal Conductivity Testbed for Aerospace Interface Materials

Spacecraft thermal margins depend on the temperature penalty of installed interfaces, yet catalog conductivity omits bondline thickness, mating surfaces, preload, and environment. The Testbed for Advanced Interface Materials in Vacuum (TAIMV) addresses this engineering-data gap by converting ambient/vacuum temperature fields from a four-coupon stack into quantities usable in spacecraft thermal models. Its 17-node steady-state model resolves axial conduction, parasitic fixture paths, grease-filled contact, radiation, and ambient convection. Four monolithic checks gave axial heat-rate ratios of 0.90–1.02, and Braycote calibration self-recovery gave 2.20% casewise mean absolute percentage error (MAPE) and 2.85% maximum difference. With transferable fixture terms frozen, Krytox LVP tested cross-material transfer against a manufacturer-derived external relation. The six Krytox cases gave 2.28% MAPE, 5.10% maximum difference, and full-field residual root-mean-square values of 0.553 °C ambient and 1.306 °C vacuum. Installed-joint resistance spanned 6.39–7.15 × 10⁻⁴ m²·K/W for Braycote and 4.09–4.49 × 10⁻⁴ m²·K/W for Krytox, corresponding to 2.33–6.66 K per modeled interface over the tested heat-flux range. TAIMV therefore supplies directly usable installed-joint resistance and conductance, plus apparent installed conductivity and explicitly model-conditioned grease conductivity/contact terms.

heat transfer↗

Using Computational Flow Imaging to Optimize Filtered Rayleigh Scattering Measurements of an Isolator Shock Train

Filtered Rayleigh scattering (FRS) is a laser diagnostic where the intensity of elastically scattered light is measured after it passes through a molecular absorption filter. The filter removes background interference that overwhelms the relatively weak scattering from the gas molecules. However, with a filter, the measured light intensity depends on many of the scattering gas properties, including pressure, density, temperature, and velocity. In this work, CFD simulations of an isolator shock train flow field are input into a physics-based model to predict the values of FRS intensity measurements in a proposed experiment. The goal is to evaluate if a simplistic FRS setup (that utilizes one camera, laser, and absorption filter) can be used to accurately quantify number density despite the fact that the scattered light intensity also depends on other gas properties. It is found that the experimental setup can be optimized such that a linear relationship describes the number density with an average prediction error of 2%. The vast majority of the flow exhibits prediction errors of less than 3%, but small regions of the flow reach up to 11% error. A sensitivity analysis shows that the prediction error increases with the central wavelength of the incident laser light and decreases with the angle between the camera and laser propagation directions. The optimal experimental parameters are chosen based on a compromise between the prediction error, spatial resolution, and the amount of unfiltered light. In the future, the proposed FRS setup will be implemented to acquire new and valuable information on an isolator shock train, a flow field that has been traditionally studied using wall static pressure measurements and path-integrated visualization techniques, such as schlieren and shadowgraphy.

Hunt, Robin L.↗

Accuracy of Geophysical Parameters Derived from AIRS/AMSU as a Function of Fractional Cloud Cover

AIRS was launched on EOS Aqua on May 4,2002, together with AMSU A and HSB, to form a next generation polar orbiting infrared and microwave atmospheric sounding system. The primary products of AIRS/AMSU are twice daily global fields of atmospheric temperature-humidity profiles, ozone profiles, sea/land surface skin temperature, and cloud related parameters including OLR. The sounding goals of AIRS are to produce 1 km tropospheric layer mean temperatures with an rms error of 1K, and layer precipitable water with an rms error of 20%, in cases with up to 80% effective cloud cover. The basic theory used to analyze AIRS/AMSU/HSB data in the presence of clouds, called the at-launch algorithm, was described previously. Pre-launch simulation studies using this algorithm indicated that these results should be achievable. Some modifications have been made to the at-launch retrieval algorithm as described in this paper. Sample fields of parameters retrieved from AIRS/AMSU/HSB data are presented and validated as a function of retrieved fractional cloud cover. As in simulation, the degradation of retrieval accuracy with increasing cloud cover is small. HSB failed in February 2005, and consequently HSB channel radiances are not used in the results shown in this paper. The AIRS/AMSU retrieval algorithm described in this paper, called Version 4, become operational at the Goddard DAAC in April 2005 and is being used to analyze near-real time AIRS/AMSU data. Historical AIRS/AMSU data, going backwards from March 2005 through September 2002, is also being analyzed by the DAAC using the Version 4 algorithm.

Susskind, Joel↗

Upset Characterization of the PowerPC405 Hard-core Processor Embedded in Virtex-II Pro Field Programmable Gate Arrays

Shown in this presentation are recent results for the upset susceptibility of the various types of memory elements in the embedded PowerPC405 in the Xilinx V2P40 FPGA. For critical flight designs where configuration upsets are mitigated effectively through appropriate design triplication and configuration scrubbing, these upsets of processor elements can dominate the system error rate. Data from irradiations with both protons and heavy ions are given and compared using available models.

radiation effects↗

Synoptic Mapping of Chemical Composition, Thermal Structure, and Air Motion from UARS Observations

An operational mapping algorithm was developed to process measurements of individual species observed by different satellite instruments on board UARS. Based on Fast Fourier Synoptic Mapping (FFSM), the algorithm accounts for the precessing orbit of UARS, the error of individual instruments, and gaps associated with instrument duty cycle and the satellite yaw maneuver. It provides synoptic structure and evolution on periods as short as 1 day, derived collectively from all observations of an individual species. The algorithm was applied to synoptically map temperature, thickness, and several chemical constituents observed by the instruments: MLS, CLAES, ISAMS, and HALOE. Each field variable observed by these instruments was mapped twice-daily in continuous global time series several months long. Mapped behavior produced via FFSM was compared against standard archived products generated via Kalman filtering. The standard map products reveal similar behavior, but are limited to features of larger scale. Tracer structure that develops through flow deformation and attending transport is therefore represented in those products more coarsely, eventually being sheared down to scales that are no longer represented properly. The synoptic time series also reveal a diurnal cycle for several of the constituents, one that emerges clearly in their space-time spectra. The zonal and meridional structure of diurnal variability was mapped by filtering the space-time spectrum, an intermediate product of FFSM, to those scales resolved by the UARS sampling. Geographical variations of the diurnal cycle have also been evaluated in its seasonal-mean structure by compositing distributions at individual local times. Both were compared to diurnal variations in chemical models and in dynamical models that account for transport by the diurnal tide. Diurnal variations were found to introduce spurious behavior into the archived products generated via Kalman filtering, behavior that is misrepresented in those synoptic time series. Aliasing by under-sampled diurnal variations introduces a bias into the time-mean structure of archived products. That systematic error is manifested as anomalous wave structure in the time-mean fields. By contrast, synoptic time series generated via FFSM faithfully represent such behavior as varying diurnally, so it does not corrupt time-mean structure. Tracer structure mapped via the above algorithm was being applied to determine the Brewer-Dobson circulation of the stratosphere through Lagrangian considerations. Preliminary results are encouraging: They reveal diabatic ascent in the tropics, balanced by diabatic descent over the winter hemisphere. This Lagrangian description of transport derived from UARS tracer measurements would be potentially valuable for diagnosing interannual changes of transport, specifically, in relation to interannual changes of total ozone. Regrettably, support was reduced to 50% of the approved funding level, leaving this component incomplete.

Salby, Murry L.↗

Aircraft wake vortex velocity measurements using a scanning CO2 laser Doppler velocimeter

A CO2 laser Doppler velocimeter was employed in the study of pairs of counterrotating vortices trailing aircraft in an airport air space. A laser positioned on an extended runway centerline scans a vertical plane perpendicular to the centerline. Vortex location, measurement of vortex transport, and measurement of the properties of aircraft wake vortex flow fields are achieved via spectral analysis of the data. Highest amplitude in the spectrum, the associated maximum velocity, the highest velocity above the amplitude threshold, and the total number of frequency (velocity) cells above thresholds are studied as parameters in analysis of the vortex-associated flow field. The profile of the radial variation of tangential velocity is studied, and two special problems are examined: location of the vortex center and error introduced by crosswind.

Dimarzio, C. A.↗

Report of secondary flows, boundary layers, turbulence and wave team, report 1

General criteria for a flight test option are that: (1) there be a good opportunity for comparison with other measurement techniques; (2) the flow to be measured is of considerable scientific or practical interest; and (3) the airborne laser Doppler system is well suited to measure the required quantities. The requirement for comparison, i.e., ground truth, is particularly important because this is the first year of operation for the system. It is necessary to demonstrate that the system does actually measure the winds and compare the results with other methods to provide a check on the system error analysis. The uniqueness of the laser Doppler system precludes any direct comparison, but point measurements from tower mounted wind sensors and two dimensional fields obtained from radars with substantially different sampling volumes are quite useful.

Scoggins, J. R.↗

A survey of nongravitational forces and space environmental torques with applications to the Galileo spacecraft

A detailed survey of nongravitational forces and space environmental torques acting upon the Galileo spacecraft during its interplanetary flight to Jupiter is given. It includes simple analytic equations to model the first order effect of: solar, planetary and spacecraft radiation, solar wind, meteoroids, cosmic rays, magnetic fields, atmospheric forces and gas leakage of the propulsion system. The model parameters are taken from recent spaceflight data. The result is a probabilistic error model of the magnitudes of the disturbing forces and torques. It provides a useful tool for the analysis of the Galileo and future spaceflight missions.

Longuski, J. M.↗

Use of interactive graphics to analyze QUICK-geometry

The QUICK InterActive Graphics Analysis (QUIAGA) program and its advantages for displaying aircraft QUICK-geometry to aid in detection and analysis of errors are described. The QUICK-geometry system generates a completely analytical aircraft geometry description for use by finite-difference flow codes. The QUIAGA program was developed to exercise the QUICK-geometry subroutines to examine the analytic definition of a configuration by plotting cross sections and body lines on a graphics terminal. A number of options are available, including multiple cross-section views, hidden-line removal, and display of control point locations. Use of these options for the detection and analysis of errors in the QUICK-geometry definition can be of great assistance in speedily arriving at a correct analytical geometry description for flow-field computation. The QUIAGA program has been used in developing a QUICK-geometry model of the NASA Space Shuttle Orbiter, and examples from this experience are given to show some of the program's features. Details of program usage and an example session are given in the appendixes.

Townsend, J. C.↗

An investigation of the crustal properties of Australia and surrounding regions derived from interpretation of MAGSAT anomaly field data

The 2 deg averaged data set was analyzed and filtered to produce a magnetic anomaly map of the Australian continental region. The map was overlain on a tectonic map of Australia and correlations were made. A data set was selected that is dominated by relatively low elevation profiles with small changes of elevation within the Australian area in an effort to maximize the crustal anomaly field signal and reduce the effect of variation in satellite elevation. Support systems, both hardware and software are described and best-worst case errors encountered during processing of MAGSAT investigator tapes are summarized. The Broken Ridge anomaly was studied for model development purposes.

Johnson, B. D.↗

Use of satellite data in agricultural surveys

The state-of-the-art of crop surveying by satellite is reviewed with an emphasis on the signature extension problem. Registration and preprocessing procedures are discussed with refereence to: normalization of the radiometric values of each scene for scene-to-scene differences; registration techniques, implemented at the NASA Johnson Space Center, capable of 0.5 pixel root-mean-square error; and current research in this direction. Data transformation and modeling techniques applied to the Landsat MSS images and a solution for the field-to-field variations of the greenness and brightness temporal trajectories are included. Finally, a review of the mixture decomposition method of labeling and estimating the areal proportions is given.

Hall, F. G.↗

Adaptive optics

An estimation of the costs and potential resolution and sensitivity benefits of adaptive optics systems is presented. The effects of atmospheric disturbances on the peak-to-peak wavefront errors are assessed. Definitions are included of the maximum permissible controlled patch of entrance pupil of the system, the permissible response time, the permissible field radius, and the required magnitude and frequency of a reference star. It is pointed out that adaptive optics system for visible of near-visible wavelengths is likely to be very expensive, whereas operation at 2-3 microns under best seeing conditions is expected to be useful and have reasonable cost.

Woolf, N. J.↗

Optimized three-dimensional lenses for wide-angle scanning

Three-dimensional bootlace lens antennas with two and four focal points can be optimized to produce high-quality scanned beams over a wide field of view. For two-dimensional scanning, the planar feed locus is replaced by a curved feed locus designed to minimize path length errors. Comparisons with previous bootlace lens designs demonstrate the advantages of this focal distribution. The bifocal lens shows good scanning performance in both principal and orthogonal planes. The quadrufocal lens performs better in its principal plane than in its orthogonal plane. It is also shown that the quadrufocal lens can be realized with a planar outer surface and a circular focal arc, and improved scanning performance is still achievable. Further optimization of the focal arc and/or relaxation of the planar outer surface condition results in quadrufocal lenses with negligible phase errors in the principal plane.

Rappaport, C. M.↗

Airborne Doppler lidar techniques for observing severe thunderstorms

On 30 June 1981 the wind fields around an Oklahoma severe thunderstorm were observed in detail using an airborne Doppler lidar operated by NASA. Desipte uncertainties caused by inertial navigation errors and problems in sampling some of the aircraft attitude and motion parameters, reasonably clear picures of the distributions of relative reflectivity, horizontal wind velocity, and velocity spectral width near the cloud base have been obtained. Aspects of the design and functioning of the NASA lidar relevant to the collection and analysis of the data are described.

Mccaul, E. W., Jr.↗

The LAGEOS Lense-Thirring precession and the LAGEOS non-gravitational nodal perturbations. I

After a brief description of the experiment to detect the gravitomagnetic field using high altitude laser ranged artificial satellites, several nongravitational perturbations that affect the LAGEOS nodal longitude are studied. It is shown that the error in the calculated value of the secular nodal precession or the value of the secular nodal precession itself is, for each perturbation, less than 1 percent of the gravitomagnetic drag.

Ciufolini, Ignazio↗

Introduction to total- and partial-pressure measurements in vacuum systems

An introduction to the fundamentals of total and partial pressure measurement in the vacuum regime (760 x 10 to the -16th power Torr) is presented. The instrument most often used in scientific fields requiring vacuum measurement are discussed with special emphasis on ionization type gauges and quadrupole mass spectrometers. Some attention is also given to potential errors in measurement as well as calibration techniques.

Outlaw, R. A.↗

Remote sensing of ocean currents

A method of remotely measuring near-surface ocean currents with a synthetic aperture radar (SAR) is described. The apparatus consists of a single SAR transmitter and two receiving antennas. The phase difference between SAR image scenes obtained from the antennas forms an interferogram that is directly proportional to the surface current. The first field test of this technique against conventional measurements gives estimates of mean currents accurate to order 20 percent, that is, root-mean-square errors of 5 to 10 centimeters per second in mean flows of 27 to 56 centimeters per second. If the full potential of the method could be realized with spacecraft, then it might be possible to routinely monitor the surface currents of the world's oceans.

Goldstein, R. M.↗