Search NASA⌕ Search

SEARCH · Search NASA

Results for “Project Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

CHARACTERISTICS OF KINEMATICS OF A CORONAL MASS EJECTION DURING THE 2010 AUGUST 1 CME-CME INTERACTION EVENT

We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and heliospheric imager (HI) data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field of view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; {approx}1200 km s{sup -1}) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; {approx}700 km s{sup -1}). By applying a drag-based model we are able to reproduce the kinematical profile of CME2, suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag.

79 ASTRONOMY AND ASTROPHYSICS↗

ISOTHERMAL DISTRIBUTIONS IN MONDian GRAVITY AS A SIMPLE UNIFYING EXPLANATION FOR THE UBIQUITOUS{rho}{proportional_to}r {sup -3} DENSITY PROFILES IN TENUOUS STELLAR HALOS

That the stellar halo of the Milky Way has a density profile which, to first approximation, satisfies{rho}{proportional_to}r {sup -3} and has been known for a long time. More recently, it has become clear that M31 also has such an extended stellar halo, which approximately follows the same radial scaling. Studies of distant galaxies have revealed the same phenomenology. Also, we now know that the density profiles of the globular cluster systems of our Galaxy and Andromeda to first approximation follow{rho}{proportional_to}r {sup -3},{Sigma}{proportional_to}R {sup -2} in projection. Recently, diffuse populations of stars have been detected spherically surrounding a number of Galactic globular clusters, extending much beyond the Newtonian tidal radii, often without showing any evidence of tidal features. Within the standard Newtonian and general relativity scenario, numerous and diverse particular explanations have been suggested, individually tailored to each of the different classes of systems described above. Here we show that in a MONDian gravity scenario any isothermal tenuous halo of tracer particles forming a small perturbation surrounding a spherically symmetric mass distribution will have an equilibrium configuration which to first approximation satisfies a{rho}{proportional_to}r {sup -3} scaling.

79 ASTRONOMY AND ASTROPHYSICS↗

TIDAL INTERACTION AS THE ORIGIN OF EARLY-TYPE DWARF GALAXIES IN GROUP ENVIRONMENTS

We present a sample of dwarf galaxies that suffer ongoing disruption by the tidal forces of nearby massive galaxies. By analyzing structural and stellar population properties using the archival imaging and spectroscopic data from the Sloan Digital Sky Survey (SDSS), we find that they are likely a ''smoking gun'' example of the formation through tidal stirring of early-type dwarf galaxies (dEs) in the galaxy group environment. The inner cores of these galaxies are fairly intact and the observed light profiles are well fit by the Sérsic functions while the tidally stretched stellar halos are prominent in the outer parts. They are all located within a sky-projected distance of 50 kpc from the centers of the host galaxies and no dwarf galaxies have relative line-of-sight velocities larger than 205 km s{sup –1} to their hosts. We derive the Composite Stellar Population properties of these galaxies by fitting the SDSS optical spectra to a multiple-burst composite stellar population model. We find that these galaxies accumulate a significant fraction of stellar mass within the last 1 Gyr and contain a majority stellar population with an intermediate age of 2 to 4 Gyr. Based on this evidence, we argue that tidal stirring, particularly through the galaxy-galaxy interaction, might have an important role in the formation and evolution of dEs in the group environment where the influence of other gas stripping mechanism might be limited.

79 ASTRONOMY AND ASTROPHYSICS↗

The Concentration–Mass relation of massive, dynamically relaxed galaxy clusters: agreement between observations and ΛCDM simulations

ABSTRACT The relationship linking a galaxy cluster’s total mass with the concentration of its mass profile and its redshift is a fundamental prediction of the Cold Dark Matter (CDM) paradigm of cosmic structure formation. However, confronting those predictions with observations is complicated by the fact that simulated clusters are not representative of observed samples where detailed mass profile constraints are possible. In this work, we calculate the symmetry-peakiness-alignment (SPA) morphology metrics for maps of X-ray emissivity from the three hundred project hydrodynamical simulations of galaxy clusters at four redshifts, and thereby select a sample of morphologically relaxed, simulated clusters, using observational criteria. These clusters have on average earlier formation times than the full sample, confirming that they are both morphologically and dynamically more relaxed than typical. We constrain the concentration–mass–redshift relation of both the relaxed and complete sample of simulated clusters, assuming power-law dependences on mass (κm) and 1 + z (κζ), finding κm = −0.12 ± 0.07 and κζ = −0.27 ± 0.19 for the relaxed subsample. From an equivalently selected sample of massive, relaxed clusters observed with Chandra, we find κm = −0.12 ± 0.08 and κζ = −0.48 ± 0.19, in good agreement with the simulation predictions. The simulated and observed samples also agree well on the average concentration at a pivot mass and redshift providing further validation of the ΛCDM paradigm in the properties of the largest gravitationally collapsed structures observed. This also represents the first clear detection of decreasing concentration with redshift, a longstanding prediction of simulations in data.

79 ASTRONOMY AND ASTROPHYSICS↗

On the relationship between uncertainties in tropical divergence and the hydrological cycle in global models

A survey of tropical divergence from three GCMs, three global reanalyses and four insitu soundings from field campaigns shows the existence of large uncertainties in the ubiquity of shallow divergent circulation as well as the depth and strength of the deep divergent circulation. More specifically, only two GCMs out of the three GCMs and three global reanalyses show significant shallow divergent circulation, which is present in all in-situ soundings, and of the three GCMs and three global reanalyses, only two global reanalyses have deep divergence profiles that lie within the range of uncertainty of the soundings. The relationships of uncertainties in the shallow and deep divergent circulation to uncertainties in present day and projected strength of the hydrological cycle from the GCMs are assessed. In the tropics and subtropics, deep divergent circulation is the largest contributor to moisture convergence that balances the net precipitation, and inter-model differences in the present day simulations carry over onto the future projections. In comparison to the soundings and reanalyses, the GCMs are found to have deeper and stronger divergent circulation. While these two characteristics of GCM divergence affect the strength of the hydrological cycle, they tend to compensate for each other so that their combined effect is relatively modest.

54 ENVIRONMENTAL SCIENCES↗

Radiosonde Observations of Environments Supporting Deep Moist Convection Initiation during RELAMPAGO-CACTI

The Remote Sensing of Electrification, Lightning, and Mesoscale/Microscale Processes with Adaptive Ground Observations (RELAMPAGO) and Cloud, Aerosol, and Complex Terrain Interactions (CACTI) projects deployed a high-spatiotemporal-resolution radiosonde network to examine environments supporting deep convection in the complex terrain of central Argentina. This study aims to characterize atmospheric profiles most representative of the near-cloud environment (in time and space) to identify the mesoscale ingredients affecting storm initiation and growth. Spatiotemporal autocorrelation analysis of the soundings reveals that there is considerable environmental heterogeneity, with boundary layer thermodynamic and kinematic fields becoming statistically uncorrelated on scales of 1–2 h and 30 km. Using this as guidance, we examine a variety of environmental parameters derived from soundings collected within close proximity (30 km in space and 30 min in time) of 44 events over 9 days where the atmosphere either: 1) supported the initiation of sustained precipitating convection, 2) yielded weak and short-lived precipitating convection, or 3) produced no precipitating convection in disagreement with numerical forecasts from convection-allowing models (i.e., Null events). There are large statistical differences between the Null event environments and those supporting any convective precipitation. Null event profiles contained larger convective available potential energy, but had low free-tropospheric relative humidity, higher freezing levels, and evidence of limited horizontal convergence near the terrain at low levels that likely suppressed deep convective growth. Here, we also present evidence from the radiosonde and satellite measurements that flow–terrain interactions may yield gravity wave activity that affects CI outcome.

54 ENVIRONMENTAL SCIENCES↗

Severe Accident Test Station Design Document

The purpose of the ORNL severe accident test station (SATS) is to provide a platform for evaluation of advanced fuels under projected beyond design basis accident (BDBA) conditions. The SATS delivers the capability to map the behavior of advanced fuels concepts under accident scenarios across various temperature and pressure profiles, steam and steam-hydrogen gas mixtures, and thermal shock. The overall facility will include parallel capabilities for examination of fuels and irradiated materials (in-cell) and non-irradiated materials (out-of-cell) at BDBA conditions as well as design basis accident (DBA) or loss of coolant accident (LOCA) conditions. Also, a supporting analytical infrastructure to provide the data-needs for the fuel-modeling components of the Fuel Cycle Research and Development (FCRD) program will be put in place in a parallel manner. This design report contains the information for the first, second and third phases of design and construction of the SATS. The first phase consisted of the design and construction of an out-of-cell BDBA module intended for examination of non-irradiated materials. The second phase of this work was to construct the BDBA in-cell module to test irradiated fuels and materials as well as the module for DBA (i.e. LOCA) testing out-of-cell, The third phase was to build the in-cell DBA module. The details of the design constraints and requirements for the in-cell facility have been closely captured during the deployment of the out-of-cell SATS modules to ensure effective future implementation of the in-cell modules.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Data Fusion to Enhance Quality Control and Analysis with Instruments at the Marine and Coastal Research Laboratory

Deploying environmental monitoring instruments in the marine environment can be challenging, facing challenges around device survivability, biofouling and corrosion, and consistent data collection. This project explores the use of data fusion – the process of integrating multiple data sources to produce more consistent, accurate, and useful information – to build a consistent long-term monitoring system at the Marine and Coastal Research Laboratory (MCRL) in Sequim, Washington. Unused instruments that had been acquired from past projects were inventoried and deployments planned on the MCRL pier and floating dock. A total of 8 instruments were deployed including a tide gauge, hydrophone, acoustic Doppler current profiler (ADCP), photosynthetically active radiation (PAR) sensors, meteorological station, and three water quality sensors. Deployments were planned to be well-protected around the pier structure and a maintenance schedule was created for cleaning and recalibration. An automated data pipeline was created to aggregate data on edge computers that push data to Amazon Web Services (AWS) cloud storage every 15 minutes, performing automated quality control and data transformations using the Time Series Data Analytical Toolkit (TSDAT). Continued efforts are underway to maintain this system into the future, take a data-driven approach to maintenance scheduling, improve the reliability of the system, and share the data with a variety of end-users.

54 ENVIRONMENTAL SCIENCES↗

Electromagnetic Energy-Assisted Thermal Conversion of Fossil-Based Hydrocarbons to Low-Cost Hydrogen

The goal of this project was to develop and optimize catalysts for methane decomposition, particularly focusing on regeneration via an electromagnetic energy-assisted mechanism, to produce hydrogen more cost-effectively compared to electrolysis routes. To achieve this goal, the project pursued several key objectives. The project began with the preparation and testing of various catalysts. A nickel-silica based catalyst was identified as the most promising material for the pyrolysis of methane into carbon and hydrogen. Kinetic parameters for methane decomposition were determined, aiding in computational modeling efforts. Structured catalysts were investigated, highlighting the need for frequent cleaning or regeneration to maintain performance, with methane conversion rates exceeding 70% in tube furnace tests. Computational fluid dynamics modeling was employed to optimize reactor designs and electrode angles, leading the project team to propose a multi-compartment thermal conversion system for larger setups. This modeling work was important in understanding reaction characteristics, carbon deposition rates, and temperature profiles under various conditions. A bench-scale reactor system was assembled to evaluate catalyst regeneration using electromagnetic energy-assisted mechanisms. Experiments demonstrated the potential for carbon removal, though further optimization is needed. The carbon produced from the methane conversion process was evaluated for potential use in lithium-ion battery electrodes. The carbon exhibited properties similar to commercially available high-purity multi-walled carbon nanotubes and nanofibers, with a carbon content greater than 95%. Coin cell batteries assembled with this carbon showed that lower replacement levels (10% to 33%) outperformed the control group, improving specific capacity density and stability. However, higher replacement levels (100%) demonstrated poorer performance, suggesting that excessive carbon substitution negatively impacts battery performance. These findings indicate the potential marketability of the produced carbon as a component in lithium-ion batteries, though further testing is necessary to confirm long-term advantages and disadvantages associated with the use of the carbon product. These results however justified further technoeconomic assessments to determine if the process can provide low-cost hydrogen. The economic feasibility and technical performance of methane decomposition for hydrogen production were assessed, focusing on three plant configurations: 100E (electrically heated), 100C (combustion heated using produced hydrogen), and PE-Hybrid (a combination of pyrolysis (indicating decomposition) and electrolysis). The Levelized Cost of Hydrogen (LCOH) for the pyrolysis configurations was found to be approximately 25% lower than that of electrolysis. The 100E configuration had the lowest LCOH at $\$$3.12/kg. Including carbon product sales significantly improved the economics, with the 100C configuration achieving a negative LCOH of -$\$$0.35/kg. The PE-Hybrid configuration was not economically advantageous compared to pure pyrolysis plants due to its complexity and additional equipment requirements. Ultimately, methane pyrolysis presents a viable method for near carbon dioxide-free hydrogen production, with significant economic advantages over electrolysis, especially when considering the sale of carbon byproducts. The 100E and 100C configurations showed the most promise, with the choice between them ultimately depending on the prices of power and natural gas. In conclusion, this technology has the potential to lower hydrogen production costs by leveraging the methane decomposition process with the sale of valuable carbon byproducts. By optimizing catalyst performance and integrating electromagnetic energy-assisted regeneration, the process can achieve higher efficiency and economic viability, making it a competitive alternative to traditional hydrogen production methods.

08 HYDROGEN↗

The RINGS Survey. III. Medium-resolution Hα Fabry–Pérot Kinematic Data Set

The distributions of stars, gas, and dark matter in disk galaxies provide important constraints on galaxy formation models, particularly on small spatial scales (<1 kpc). We have designed the RSS Imaging spectroscopy Nearby Galaxy Survey (RINGS) to target a sample of 19 nearby spiral galaxies. For each of these galaxies, we obtain and model Hα and H i 21 cm spectroscopic data as well as multi-band photometric data. We intend to use these models to explore the underlying structure and evolution of these galaxies in a cosmological context, as well as whether the predictions of ΛCDM are consistent with the mass distributions of these galaxies. In this paper, we present spectroscopic imaging data for 14 of the RINGS galaxies observed with the medium spectral resolution Fabry–Pérot etalon on the Southern African Large Telescope. From these observations, we derive high spatial resolution line-of-sight velocity fields of the Hα line of excited hydrogen, as well as maps and azimuthally averaged profiles of the integrated Hα and [N ii] emission and oxygen abundances. We then model these kinematic maps with axisymmetric models, from which we extract rotation curves and projection geometries for these galaxies. We show that our derived rotation curves agree well with other determinations, and the similarity of the projection angles with those derived from our photometric images argues against these galaxies having intrinsically oval disks.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultraviolet observations of 31 and 32 Cygni

Some observations of 31 and 32 Cygni, started in September 1978, at phases 0.62 and 0.17, respectively, are presented. The UV spectrum of 32 Cyg is described both qualitatively and quantitatively. Numerous lines of Si II, O I, C II, Al II and III and Fe II appear with P Cygni characteristics. The LWR-2275 image is dominated by the Mg II 2800 A resonance doublet and numerous Fe II lines in the 2200 - 2700 A region, all showing P Cygni profiles. More quantitatively, ionization modeling for the B star environs was made by comparing observed and computed equivalent widths to deduce density, temperature and turbulence values. At the projected separation between the stars, the log particle density obtained was 7.2, neglecting dust and molecule formation.

Stencel, R. E.↗

An ER-2 aircraft airborne lidar as part of the development program of a spaceborne system: A potential NASA/CNES cooperative project

A lidar system for atmospheric investigations to fly aboard a high altitude aircraft is introduced. Scientific objectives of the program are reviewed in terms of the expected accuracy and temporal and/or spatial resolution of measurements such as ozone vertical profiles in the troposphere and stratosphere, cirrus clouds studies, tropospheric and stratospheric aerosol monitoring and water vapor measurements in the boundary layer and at the troposphere stratosphere interface. The instrument is conceived as an autonomous, space qualified system as a first step towards a fully automated system for spaceborne applications.

Megie, G.↗

Solar concentrator advanced development project

A solar dynamic concentrator design developed for use with a solar-thermodynamic power generation module intended for the Space Station is considered. The truss hexagonal panel reflector uses a modular design approach and is flexible in attainable flux profiles and assembly techniques. Preliminary structural, thermal, and optical analysis results are discussed. Accuracy of the surface reflectors should be within 5 mrad rms slope error, resulting in the need for close fabrication tolerances. Significant fabrication issues to be addressed include the facet reflective and protective coating processes and the surface specularity requirements.

Corrigan, Robert D.↗

Laser annealing of amorphous/poly: Silicon solar cell material flight experiment

The preliminary design proposed for the microelectronics materials processing equipment is presented. An overall mission profile, description of all processing steps, analysis methods and measurement techniques, data acquisition and storage, and a preview of the experimental hardware are included. The goal of the project is to investigate the viability of material processing of semiconductor microelectronics materials in a micro-gravity environment. The two key processes are examined: (1) Rapid Thermal Annealing (RTA) of semiconductor thin films and damaged solar cells, and (2) thin film deposition using a filament evaporator. The RTA process will be used to obtain higher quality crystalline properties from amorphous/poly-silicon films. RTA methods can also be used to repair radiation-damaged solar cells. On earth this technique is commonly used to anneal semiconductor films after ion-implantation. The damage to the crystal lattice is similar to the defects found in solar cells which have been exposed to high-energy particle bombardment.

Cole, Eric E.↗

Human Exploration Initiative

The planning and development of elements of the Human Exploration Initiative (HEI) program are described including mission designs, launch vehicles, and program phasing. Attention is given to the objective of the lunar and Martian projects as well as to the phased exploration strategy involving the Space Station Freedom, the lunar surface, and ultimately permanently manned bases on the moon and Mars. Mission profiles are illustrated for piloted and cargo missions, and the development of earth-to-orbit launch vehicles is reviewed emphasizing the uses of the Shuttle-C and the heavy-lift launch vehicle. Launch-site operations flow concepts are described for the lunar and lunar/Mars phases, and the baseline ground-processing scenarios are shown to define the preliminary facility requirements. The overview demonstrates the areas of development required for achieving the goals of the HEI program.

Goldsby, William D.↗

Multiple Waveband Temperature Sensor (MWTS)

This slide presentation reviews the development of Multiple Waveband Temperature Sensor (MWTS). The MWTS project will result in a highly stable, monolithically integrated, high resolution infrared detector array sensor that records registered thermal imagery in four infrared wavebands to infer dynamic temperature profiles on a laser-irradiated ground target. An accurate surface temperature measurement of a target in extreme environments in a non-intrusive manner is required. The development challenge is to: determine optimum wavebands (suitable for target temperatures, nature of the targets and environments) to measure accurate target surface temperature independent of the emissivity, integrate simultaneously readable multiband Quantum Well Infrared Photodetectors (QWIPs) in a single monolithic focal plane array (FPA) sensor and to integrate the hardware/software and system calibration for remote temperature measurements. The charge was therefore to develop and demonstrate a multiband infrared imaging camera with the detectors simultaneously sensitive to multiple distinct color bands for front surface temperature measurements Wavelength ( m) measurements. Amongst the requirements are: that the measurement system will not affect target dynamics or response to the laser irradiation and that the simplest criterion for spectral band selection is to choose those practically feasible spectral bands that create the most contrast between the objects or scenes of interest in the expected environmental conditions. There is in the presentation a review of the modeling and simulation of multi-wave infrared temperature measurement and also a review of the detector development and QWIP capacities.

infrared photodector↗

Overview of the Altair Lunar Lander Thermal Control System Design

NASA's Constellation Program has been developed to successfully return humans to the Lunar surface prior to 2020. The Constellation Program includes several different project offices including Altair, which is the next generation Lunar Lander. The planned Altair missions are very different than the Lunar missions accomplished during the Apollo era. These differences have resulted in a significantly different thermal control system architecture. The Altair project has employed a rather unique development approach as compared with previous manned spacecraft programs. Altair started the design process by developing a single-string (no fault tolerance), minimum functionality design. This first design and analysis cycle resulted in the baseline design for the entire process. From this point of departure, Altair continued the development process by adding vehicle functionality for the purposes of minimizing the risk of Loss Of Crew (LOC) and Loss Of Mission (LOM). Through the subsequent design and analysis cycles, the project office compared the added mass associated with the reduction of LOC/LOM and selected the most mass efficient design solutions. The current paper will summarize the Altair mission profile, the operational phases, and the LOC/LOM decisions that were made during the various design cycles. The evolution of the thermal control system design through Lunar Design and Analysis Cycle 3 (LDAC-3) will also be described in this paper.

Stephan, Ryan A.↗

Human and Robotic Exploration of Near-Earth Objects

A study in late 2006 was sponsored by the Advanced Projects Office within NASA's Constellation Program to examine the feasibility of sending the Orion Crew Exploration Vehicle to a near-Earth object (NEO). The ideal mission profile would involve two or three astronauts on a 90 to 180 day flight, which would include a 7 to 14 day stay for proximity operations at the target NEO. More recently U.S. President Obama stated on April 15, 2010 that the next goal for human spaceflight will be to send human beings to a near-Earth asteroid by 2025. Given this direction from the White House, NASA has been involved in studying various strategies for NEO exploration in order to follow U.S. space exploration policy. Prior to sending a human mission, a series of robotic spacecraft would be launched to reduce the risk to crew, and enhance the planning for the proximity and surface operations at the NEO. The human mission would ideally follow five or more years later. This mission would be the first human expedition to an interplanetary body beyond the Earth-Moon system and would prove useful for testing technologies required for human missions to Mars and other solar system destinations. Piloted missions to NEOs would undoubtedly provide a great deal of technical and engineering data on spacecraft operations for future human space exploration while conducting in-depth scientific investigations of these primitive objects. The main scientific advantage of sending piloted missions to NEOs would be the flexibility of the crew to perform tasks and to adapt to situations in real time. A crewed vehicle would be able to test several different sample collection techniques and target specific areas of interest via extra-vehicular activities (EVAs) more efficiently than robotic spacecraft. Such capabilities greatly enhance the scientific return from these missions to NEOs, destinations vital to understanding the evolution and thermal histories of primitive bodies during the formation of the early solar system. Data collected from these missions would help constrain the suite of materials possibly delivered to the early Earth, and would identify potential source regions from which NEOs originate. In addition, the resulting scientific investigations would refine designs for future extraterrestrial resource extraction and utilization, and assist in the development of hazard mitigation techniques for planetary defense.

Abell, Paul A.↗