Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analytical Methods (AM)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization

Abstract Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon‐supported single atom catalysts focused on nitrogen‐doped carbons, which, unlike classic carbon materials, have a fairly well‐defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting‐edge analytical methods.

Vidal, Mathieu↗

Analysis of Chloroquine and Metabolites Directly from Whole-body Animal Tissue Sections by Liquid Extraction Surface Analysis (LESA) and Tandem Mass Spectrometry

The rapid and direct analysis of the amount and spatial distribution of exogenous chloroquine and chloroquine metabolites from tissue sections by liquid extraction surface sampling analysis coupled with tandem mass spectrometry (LESA-MS) was demonstrated. LESA-MS results compared well with previously published chloroquine quantification data collected by organ excision, extraction and fluorescent detection. The ability to directly sample and analyze spatially-resolved exogenous molecules from tissue sections with minimal sample preparation and analytical method development has the potential to facilitate the assessment of target tissue penetration of pharmaceutical compounds, to establish pharmacokinetic/pharmacodynamic (PK/PD) relationships, and to complement established pharmacokinetic methods used in the drug discovery process during tissue distribution assessment.

chloroquine↗

Investigation of tattoo pigments by Raman spectroscopy

As a result of the increase in the practice of tattooing, the US Food and Drug Administration has identified a need for improved analytical methods to detect the pigments and potential impurities in the inks. Raman spectroscopy allows for nondestructive identification of compounds and is commonly used in art, archaeology, and forensics; however, the technique has only limitedly been applied to the identification of tattoo pigments. In this study, approximately 30 inorganic, organometallic, and organic pigments were evaluated with Raman spectroscopy by using 532, 633, and 780‐nm lasers. Individual optimization of the instrumental parameters was performed for each pigment in order to enhance spectral quality. This research highlights the need for multiple laser interrogation, as the spectra of some pigments were difficult to obtain by using a particular wavelength due to interferences from absorption or fluorescence. However, by using these multiple wavelengths, all pigments could be identified by their unique spectral features. A spectral library of the pigments was created for each laser wavelength and then challenged with pigments from multiple manufacturers. All pigments were identified correctly, and the method is poised to be an effective, noninvasive means for qualitatively identifying tattoo pigments. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Yakes, Betsy Jean↗

Multinuclear 1 H/ 13 C/ 15 N chemical shift assignment of therapeutic octreotide acetate performed at natural abundance

Abstract Octreotide acetate, the active pharmaceutical ingredient in the long‐acting release (LAR) drug product Sandostatin®, is a cyclic octapeptide that mimics the naturally occurring somatostatin peptide hormone. Modern NMR can be a robust analytical method to identify and quantify octreotide molecules. Previous 1 H chemical shift assignments were mostly performed in organic solvents, and no assignments for heteronuclear 13 C, 15 N, and aromatic 1 H nuclei are available. Here, using state‐of‐the‐art 1D and 2D homo‐ and heteronuclear NMR experiments, octreotide was fully assigned, including water exchangeable amide protons, in aqueous buffer except for 13 CO and 15 NH of F1, 15 NH of C2, and 15 NζHζof K5 that were not observed because of water exchange or conformational exchange. The solution NMR spectra were then directly compared with 1D 1 H/ 13 C/ 15 N solid‐state NMR (SSNMR) spectra showing the potential applicability of 13 C/ 15 N SSNMR for octreotide drug product characterization.

Chemistry↗

Improving the picture of atomic structure in nonoriented polymer domains using the pair distribution function: A study of polyamide 6

Abstract Investigations of the atomic structures within polyamides started over 80 years ago and continue today. These weakly ordered materials diffract X‐rays poorly and typically require postprocessing to obtain idealized samples for structural studies. An important goal remains to develop techniques to study the local structure in its natural state, with atomic resolution, and with sensitivity to subtle changes due to synthesis conditions or other technologically relevant processing procedures. Here, we compare the structures of as‐produced, nonoriented polyamide 6 ([C 6 H 11 NO] n ) from both hydrolytic and anionic processes. A total scattering pair distribution function approach is used to elucidate information about the atomic bonding, molecular conformation, chain packing, crystallite size, and ratio of ordered to disordered domain content. The results are compared with those from standard analytical methods.

Terban, Maxwell W.↗

Compatibility Screening of Explosive‐Inert Mixtures

Inert materials are necessary components in explosive devices and they must be tested for compatibility with the explosive materials to ensure that the device will function as expected over its lifetime in representative environments. True compatibility testing is time-consuming and expensive and so compatibility screening is often used as an early assessment. The screening is carried out with analytical methods run at temperatures exceeding those that the device will encounter in its lifetime. Shortcomings of this approach are discussed and improvements using a transient contact method and microcalorimetry are proposed. Typical screening results and microcalorimetry results are compared for a polyurethane adhesive—PBX 9502 combination.

36 MATERIALS SCIENCE↗

Leveraging The Open Provenance Model as a Multi-Tier Model for Global Climate Research

Global climate researchers rely upon many forms of sensor data and analytical methods to help profile subtle changes in climate conditions. The U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) program provides researchers with curated Value Added Products (VAPs) resulting from continuous sensor data streams, data fusion, and modeling. The ARM operations staff and software development teams (data producers) rely upon a number of techniques to ensure strict quality control (QC) and quality assurance (QA) standards are maintained. Climate researchers (data consumers) are highly interested in obtaining as much provenance (data quality, data pedigree) as possible to establish data trustworthiness. Currently all the provenance is not easily attainable or identifiable without significant efforts to extract and piece together information from configuration files, log files, codes, and status information from ARM databases. The need for a formalized approach to managing provenance became paramount with the planned addition of 120 new instruments, new data products, and data collection scaling to half a terabyte daily. Last year our research identified the need for a multi-tier provenance model to enable the data consumer easy access to the provenance for their data. This year we are leveraging the Open Provenance Model as a foundational construct that serves the needs of both the VAP producers and consumers, we are organizing the provenance in different tiers of granularity to model VAP lineage, causality at the component level within a VAP, and the causality for each time step as samples are being assembled within the VAP. This paper shares our implementation strategy and how the ARM operations staff and the climate research community can greatly benefit from this approach to more effectively assess and quantify VAP provenance.

54 ENVIRONMENTAL SCIENCES↗

The geometry of the modular bootstrap

Abstract We explore the geometry behind the modular bootstrap and its image in the space of Taylor coefficients of the torus partition function. In the first part, we identify the geometry as an intersection of planes with the convex hull of moment curves onR + ⊗ℤ, with boundaries characterized by the total positivity of generalized Hankel matrices. We phrase the Hankel constraints as a semi-definite program, which has several advantages, such as the validity of bounds irrespective of spin truncation. We derive bounds on the gap, twist-gap, and the space of Taylor coefficients themselves. We find that if the gap is above$$ {\Delta }_{\textrm{gap}}^{\ast } $$ ∆ gap ∗ , where$$ \frac{c-1}{12}<{\Delta}_{\textrm{gap}}^{\ast }<\frac{c}{12} $$ c − 1 12 < Δ gap ∗ < c 12 , all coefficients become bounded on both sides and kinks develop in the space. In the second part, we propose an analytic method of imposing the integrality condition for the degeneracy number in the spinless bootstrap, which leads to a non-convex geometry. We find that even at very low derivative order this condition rules out regions otherwise allowed by bootstraps at high derivative order.

Physics↗

General gauge mediation at the weak scale

We completely characterize General Gauge Mediation (GGM) at the weak scale by solving all IR constraints over the full parameter space. This is made possible through a combination of numerical and analytical methods, based on a set of algebraic relations among the IR soft masses derived from the GGM boundary conditions in the UV. We show how tensions between just a few constraints determine the boundaries of the parameter space: electroweak symmetry breaking (EWSB), the Higgs mass, slepton tachyons, and left-handed stop/sbottom tachyons. While these constraints allow the left-handed squarks to be arbitrarily light, they place strong lower bounds on all of the right-handed squarks. Meanwhile, light EW superpartners are generic throughout much of the parameter space. This is especially the case at lower messenger scales, where a positive threshold correction to m h coming from light Higgsinos and winos is essential in order to satisfy the Higgs mass constraint.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Late-time dark matter oscillations and the core-cusp problem

The core-cusp problem persists as an unresolved tension between the pre- dictions of ΛCDM cosmology and observations of dark matter (DM) profiles in dwarf spheroidal and other galaxies. We present a novel scenario for converting cusps into cores through reactivation of DM annihilation in galaxies at late times. This can happen in asymmetric DM models when there is a very small DM-number violating mass term that causes oscillations between DM and its antiparticle. Using analytic methods as well as gravitational N-body simulations, we show that this mechanism can robustly eliminate cusps from galactic DM profiles for light fermionic DM of mass $m_χ$ ~ (0.1 – 1) GeV and a lighter mediator into which the DM can annihilate. We identify regions of parameter space where annihilation of DM particles is more efficient than elastic scattering at reducing the inner density of the DM profile. Dark matter annihilation is therefore a qualitatively distinct alternative to the mechanism of elastic self-interacting dark matter for addressing the cusp-core problem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Assessing Natural Isothiocyanate Air Emissions after Field Incorporation of Mustard Cover Crop

A regional air assessment was performed to characterize volatile natural isothiocyanate (NITC) compounds in air during soil incorporation of mustard cover crops in Washington State. Field air sampling and analytical methods were developed specific to three NITCs known to be present in air at appreciable concentrations during/after field incorporation. The maximum observed concentrations in air for the allyl, benzyl, and phenethyl isothiocyanates were respectively 188, 6.1, and 0.7 lg m-3 during mustard incorporation. Based on limited inhalation toxicity information, airborne NITC concentrations did not appear to pose an acute human inhalation exposure concern to field operators and bystanders.

54 ENVIRONMENTAL SCIENCES↗

Summary of Findings from the Biomass Refining Consortium for Applied Fundamentals and Innovation (CAFI): Corn Stover Pretreatment

The Biomass Refining Consortium for Applied Fundamentals and Innovation, with members from Auburn University, Dartmouth College, Michigan State University, the National Renewable Energy Laboratory, Purdue University, Texas A&M University, the University of British Columbia, and the University of California at Riverside, has developed comparative data on the conversion of corn stover to sugars by several leading pretreatment technologies. These technologies include ammonia fiber expansion pretreatment, ammonia recycle percolation pretreatment, dilute sulfuric acid pretreatment, flowthrough pretreatment (hot water or dilute acid), lime pretreatment, controlled pH hot water pretreatment, and sulfur dioxide steam explosion pretreatment. Over the course of two separate USDA- and DOE-funded projects, these pretreatment technologies were applied to two different corn stover batches, followed by enzymatic hydrolysis of the remaining solids from each pretreatment technology using identical enzyme preparations, enzyme loadings, and enzymatic hydrolysis assays. Identical analytical methods and a consistent material balance methodology were employed to develop comparative sugar yield data for each pretreatment and subsequent enzymatic hydrolysis. Although there were differences in the profiles of sugar release, with the more acidic pretreatments releasing more xylose directly in the pretreatment step than the alkaline pretreatments, the overall glucose and xylose yields (monomers + oligomers) from combined pretreatment and enzymatic hydrolysis process steps were very similar for all of these leading pretreatment technologies. Some of the water-only and alkaline pretreatment technologies resulted in significant amounts of residual xylose oligomers still remaining after enzymatic hydrolysis that may require specialized enzyme preparations to fully convert xylose oligomers to monomers.

09 BIOMASS FUELS↗

Ligand-Capped CdTe Quantum Dots as a Fluorescent Nanosensor for Detection of Copper Ions in Environmental Water Sample

In this work, as a novel fluorescent nano-sensor, a ligand-capped CdTe QDs (CdTe-L QDs) was designed for the detection and quantification of Cu{sup 2+} ions in environmental water samples. The synthesized QDs were characterized by transmission electron microscopy (TEM), thermo-gravimetric (TG) analysis, Fourier transform infrared (FTIR), UV–Vis spectrophotometry and fluorescence spectroscopy. Optical properties of the produced nanosensor were monitored by UV–Vis and fluorescence spectrophotometry. It was observed that fluorescence intensity of the produced nano-sensor selectively quenched by adding Cu{sup 2+} ions in comparison to other metal ions tested. Using CdTe-L QDs, a rapid and facile analytical method was developed to determine Cu{sup 2+} ions in the concentration range of 5.16 ± 0.07 × 10{sup − 8} mol L{sup − 1}–1.50 ± 0.03 × 10{sup − 5} mol L{sup − 1} with a detection limit of 1.55 ± 0.05 × 10{sup − 8} mol L{sup − 1}. The nanosensor was successfully applied for the determination of Cu{sup 2+} ions in various water samples, and the results were compared with the standard method. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of Creep and Damage for a Hollow Cylinder on the Basis of Space and Refined Shell Models

We consider the axisymmetric problem of creep and creep damage of a hollow cylinder and develop a numerical-analytic method for the solution of this nonlinear initial-boundary-value problem. We also present an example of evaluation of creep and the time to fracture for a cylinder loaded by internal pressure. The results accumulated by using a three-dimensional model are compared with the data obtained on the bases of the refined model of the theory of shells.

97 MATHEMATICS AND COMPUTING↗

Microscopic Evaluation of Contaminants in Ultra-High Purity Copper

Copper is one of the very few elements having no relatively long-lived radioisotopes and which can be electrodeposited to ultra-high levels of purity. Next generation experiments probing neutrino properties and searching for direct evidence of Dark Matter require ultra-clean materials, such as copper, containing the smallest quantities obtainable of naturally occurring radioactive contaminants. Copper is also of interest in the material science field for applications requiring low-activity materials, such as in electronics and semi-conductors, an example of which is reduced alpha activity, low-fault integrated circuits. Determining the purity of the copper is of great interest, but even more important is establishing the location of any contamination and its dispersion within the bulk material. Co-deposition of contaminants during copper electrodeposition and its relationship to nucleation and growth processes were investigated using a variety of analytical methods including scanning electron microscopy (SEM), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), and secondary ionization mass spectrometry (SIMS).

copper↗

Determination of Uranium Metal Concentration in Irradiated Fuel Storage Basin Sludge Using Selective Dissolution

Uranium metal corroding in water-saturated sludges now held in the US Department of Energy Hanford Site K West irradiated fuel storage basin can create hazardous hydrogen atmospheres during handling, immobilization, or subsequent transport and storage. Knowledge of uranium metal concentration in sludge thus is essential to safe sludge management and process design, requiring an expeditious routine analytical method to detect uranium metal concentrations as low as 0.03 wt% in sludge even in the presence of 30 wt% or higher total uranium concentrations.

Nuclear fuel storage basin sludge↗

Integrated approaches for reducing sample size for measurements of trace elemental impurities in plutonium by ICP-OES and ICP-MS

This study has demonstrated that bulk plutonium chemical analysis can be performed at small scales (\50 mg material) through three case studies. Analytical methods were developed for ICP-OES and ICP-MS instruments to measure trace impurities and gallium content in plutonium metals with comparable or improved detection limits, measurement accuracy and precision. In two case studies, the sample size has been reduced by 109, and in the third case study, by as much as 50009, so that the plutonium chemical analysis can be performed in a facility rated for lower-hazard and lower-security operations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗