Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuse radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Jupiter's radiation belts

Fluxes of electrons and protons in Jupiter's radiation belts are calculated with the source (radial diffusion inward from the solar wind) and the loss (synchroton radiation). The calculations are tested against the measured radio-wave wavelength distribution, the radio-wave distribution with distance from Jupiter, and the degree of polarization of the radio waves. The Fokker-Planck equation is solved by using the method of Farley and Walt (1971) with the fixed flux at the outer boundary and the zero flux at Jupiter's surface. It is found, in agreement with Brice and McDonough (1973), Jacques and Davis (1973), and Birmingham et al. (1974), that the usual magnetic and electric diffusions, which vary as L to the 10th power and L to the 6th power, respectively, are insufficient to furnish the required electrons and that the diffusion driven by ionospheric winds of Brice and McDonough is strong enough to furnish Jupiter's belts. An additional loss mechanism close to Jupiter is required to remove the electrons, particularly those at low energies.

Stansberry, K. G.↗

Self-diffusion of Ti interstitial based point defects and complexes in TiC

To date, the mechanism of Ti atom self-diffusion is unproven. Prior theoretical work mostly focused on Ti vacancy based mediators, but these do not reproduce the experimental activation energy or entropy. In this work, in density functional theory calculations, Ti interstitials and related defect complexes are systematically considered as possible mediators of Ti self-diffusion. Among these defects, the defect complex of two C vacancies tightly bound to a Ti dumbbell is found to have the lowest formation energy. A sustainable migration of the complex, in a translational or rotational fashion, is enabled in the presence of another (free) carbon vacancy nearby the complex, and thus the rate of Ti self-diffusion by this mechanism is dependent on the concentration of carbon vacancies. The calculated activation energy of the complex agrees well with the experimental value in TiC 0.97 . Similar analyses of the Ti self-diffusion mechanisms mediated by Ti interstitials or dumbbells yield much higher activation energies, but the corresponding migration energies are evaluated to be less than 1 eV, which suggests they can be possible mediators of the radiation-enhanced Ti self-diffusion in TiC. To fully enable the comparison with experiments that are typically conducted at temperatures as high as 2500 K, we also consider the temperature dependent vibrational contribution to the activation energy of the defect complex. The vibrational contribution imposes an additive effect on the defect formation energy, while the migration energies are lowered due to the thermal expansion of the lattice. When combined, these factors give an excellent agreement with the experiments. Furthermore, this work gives strong support to the concept that Ti interstitial based defect complexes are likely diffusion mediators for Ti atom self-diffusion in TiC, further establishes a solid basis for large-scale modeling, and may eventually pave the way to accurately predicting defect-controlled diffusional processes.

36 MATERIALS SCIENCE↗

Slip conditions with wall catalysis and radiation for multicomponent, nonequilibrium gas flow

The slip conditions for a multicomponent mixture with diffusion, wall-catalyzed atom recombination and thermal radiation are derived, and simplified expressions for engineering applications are presented. The gas mixture may be in chemical nonequilibrium with finite-rate catalytic recombination occurring on the wall. These boundary conditions, which are used for rarefied flow regime flow field calculations, are shown to be necessary for accurate predictions of skin friction and heat transfer coefficients in the rarefied portion of the space shuttle trajectory.

Hendricks, W. L.↗

High-resolution planar electron beam induced current in bulk diodes using high-energy electrons

Understanding the impact of high-energy electron radiation on device characteristics remains critical for the expanding use of semiconductor electronics in space-borne applications and other radiation harsh environments. Here in this paper, we report on in situ measurements of high-energy electron radiation effects on the hole diffusion length in low threading dislocation density homoepitaxial bulk n-GaN Schottky diodes using electron beam induced current (EBIC) in high-voltage scanning electron microscopy mode. Despite the large interaction volume in this system, quantitative EBIC imaging is possible due to the sustained collimation of the incident electron beam. This approach enables direct measurement of electron radiation effects without having to thin the specimen. Using a combination of experimental EBIC measurements and Monte Carlo simulations of electron trajectories, we determine a hole diffusion length of 264 ± 11 nm for n-GaN. Irradiation with 200 kV electron beam with an accumulated dose of 24 × 10 16 electrons cm -2 led to an approximate 35% decrease in the minority carrier diffusion length.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Combustion Processes in Hybrid Rocket Engines

In recent years, there has been a resurgence of interest in the development of hybrid rocket engines for advanced launch vehicle applications. Hybrid propulsion systems use a solid fuel such as hydroxyl-terminated polybutadiene (HTPB) along with a gaseous/liquid oxidizer. The performance of hybrid combustors depends on the convective and radiative heat fluxes to the fuel surface, the rate of pyrolysis in the solid phase, and the turbulent combustion processes in the gaseous phases. These processes in combination specify the regression rates of the fuel surface and thereby the utilization efficiency of the fuel. In this paper, we employ computational fluid dynamics (CFD) techniques in order to gain a quantitative understanding of the physical trends in hybrid rocket combustors. The computational modeling is tailored to ongoing experiments at Penn State that employ a two dimensional slab burner configuration. The coordinated computational/experimental effort enables model validation while providing an understanding of the experimental observations. Computations to date have included the full length geometry with and with the aft nozzle section as well as shorter length domains for extensive parametric characterization. HTPB is sed as the fuel with 1,3 butadiene being taken as the gaseous product of the pyrolysis. Pure gaseous oxygen is taken as the oxidizer. The fuel regression rate is specified using an Arrhenius rate reaction, which the fuel surface temperature is given by an energy balance involving gas-phase convection and radiation as well as thermal conduction in the solid-phase. For the gas-phase combustion, a two step global reaction is used. The standard kappa - epsilon model is used for turbulence closure. Radiation is presently treated using a simple diffusion approximation which is valid for large optical path lengths, representative of radiation from soot particles. Computational results are obtained to determine the trends in the fuel burning or regression rates as a function of the head-end oxidizer mass flux, G=rho(e)U(e), and the chamber pressure. Furthermore, computation of the full slab burner configuration has also been obtained for various stages of the burn. Comparisons with available experimental data from small scale tests conducted by General Dynamics-Thiokol-Rocketdyne suggest reasonable agreement in the predicted regression rates. Future work will include: (1) a model for soot generation in the flame for more quantitative radiative transfer modelling, (2) a parametric study of combustion efficiency, and (3) transient calculations to help determine the possible mechanisms responsible for combustion instability in hybrid rocket motors.

Venkateswaran,S.↗

Charge Carrier Diffusion Length Determination in 4H-SiC Schottky Alpha Detectors

When developing semiconductor radiation detectors detailed characterization of the detector behavior is required. The ability of a semiconductor radiation detector to collect the charge liberated by incident ionizing radiation is a critical characteristic. Several factors influence the charge collection efficiency of a semiconductor radiation detector, including electron-hole trapping, applied electric field strength, and dopant concentrations and dimensions of low doped regions. Applying a reverse bias electric potential to a low doped semiconductor region creates a free charge carrier depleted region and establishes an electric field which can remove subsequently freed charge in the form of an electrical signal. When ionizing radiation is incident upon a semiconductor electron-hole pairs are generated. These charge carriers are created along the path of the ionizing radiation regardless of the doping concentration. However, only the charge freed in the low doped epitaxial region of a detector will be collected as a result of the applied electric field. When the electric field is insufficient to develop a depleted region equal to or larger than the range of the ionizing radiation in the detector material some charge freed by the ionizing radiation outside of the sensitive region will be lost, thus potentially resulting in less than complete charge collection. The incomplete collection of charge complicates the analysis of the incident particle energy spectrum. Charge freed in the highly doped bulk region beyond the low doped epitaxial region may diffuse back into the low doped depleted region and be subsequently included in the integral pulse. The amount of charge collected as a result of this diffusion mechanism is dependent upon the diffusion length of the charge carriers in the material. The diffusion length is subsequently dependent on the material properties of the detector including the number of defects, trapping centers, and temperature. In order to fully characterize the properties of 4H-SiC as a radiation detector the diffusion length was calculated by adjusting the theoretical diffusion length value used in the calculation of the charge collection efficiency to agree with empirically observed charge collection efficiencies. The discrepancy between the observed and theoretical charge collection efficiency at 50 to 150 volts applied bias indicates an unexplained charge collection phenomenon which is contributing to the larger than predicted charge collection efficiency of the detectors. This voltage range corresponds to an intermediate applied bias, indicating that either the theoretical depletion width is too short, the diffusion length varies with the composition of the region that the charge carriers are diffusing through, or some other phenomenon is involved. If the charge carrier diffusion length varies depending on whether or not the diffusing charge is freed in unbiased epitaxy or bulk layer, then a function describing the variation of the diffusion layer could be determined by measuring the diffusion length at the applied voltages used previously, but over a range of epitaxial layer thicknesses. Future work includes the characterization of the effects of high temperature operation on the diffusion length of 4H-SiC in addition to measuring the effects of varying energy alpha emitter electrodeposition on the observed diffusion length. Additional Schottky barrier contacts, namely those with a nickel-platinum contact, will be tested in various sizes which have been developed in order to eliminate certain failure mechanisms and explore the potential effects of Schottky contact size on charge collection efficiency. (authors)

36 MATERIALS SCIENCE↗

Mapping of fracture and ionic conductivity changes in ion implanted solid electrolytes: Insights from molecular dynamics

Ion implantation emerges as a promising technique to address the persistent challenge of lithium (Li) filament growth in solid-state electrolytes as it can induce compressive stresses inhibiting crack growth and deflect dendrites, de facto mitigating early electrolyte failure. In this study, we examine the potential paradox of ion implantation: while aiming to enhance electrolyte performance, the radiation damage associated with implantation might inadvertently compromise both the ionic conductivity and the intrinsic fracture toughness of the material, rendering the material unsuitable for battery applications. Specifically, we employed molecular dynamics simulations to examine the scope of the downsides of ion implantation, specifically: (i) reduced ionic conductivity (due to radiation-induced amorphization) and (ii) mechanical stability (due to radiation-induced embrittlement) in ion-implanted Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolytes. We explore how radiation damage impacts LLZO’s crystalline structure, Li-ion diffusion, and fracture properties at various temperatures and radiation damage levels. The study aims to provide insights into the competing effects of ion implantation and suggest potential engineering strategies for developing more robust solid-state electrolytes with improved conductivity and dendrite resistance.

Conductivity↗

Glass transition in thaumatin crystals revealed through temperature-dependent radiation-sensitivity measurements

Radiation damage to protein crystals exhibits two regimes of temperature-activated behavior between T = 300 and 100 K, with a crossover at the protein glass transition near 200 K. These results have implications for mechanistic studies of proteins and for structure determination when cooling to T = 100 K creates excessive disorder. The temperature-dependence of radiation damage to thaumatin crystals between T = 300 and 100 K is reported. The amount of damage for a given dose decreases sharply as the temperature decreases from 300 to 220 K and then decreases more gradually on further cooling below the protein-solvent glass transition. Two regimes of temperature-activated behavior were observed. At temperatures above ∼200 K the activation energy of 18.0 kJ mol{sup −1} indicates that radiation damage is dominated by diffusive motions in the protein and solvent. At temperatures below ∼200 K the activation energy is only 1.00 kJ mol{sup −1}, which is of the order of the thermal energy. Similar activation energies describe the temperature-dependence of radiation damage to a variety of solvent-free small-molecule organic crystals over the temperature range T = 300–80 K. It is suggested that radiation damage in this regime is vibrationally assisted and that the freezing-out of amino-acid scale vibrations contributes to the very weak temperature-dependence of radiation damage below ∼80 K. Analysis using the radiation-damage model of Blake and Phillips [Blake & Phillips (1962 ▶), Biological Effects of Ionizing Radiation at the Molecular Level, pp. 183–191] indicates that large-scale conformational and molecular motions are frozen out below T = 200 K but become increasingly prevalent and make an increasing contribution to damage at higher temperatures. Possible alternative mechanisms for radiation damage involving the formation of hydrogen-gas bubbles are discussed and discounted. These results have implications for mechanistic studies of proteins and for studies of the protein glass transition. They also suggest that data collection at T ≃ 220 K may provide a viable alternative for structure determination when cooling-induced disorder at T = 100 is excessive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Differential Gene Expression in A Cross-Feeding Two-Species Model Microbial Community Under Simulated Microgravity and Deep-Space Radiation

A long-term goal of space biology is to understand interspecies microbial interactions in space. Presently, little is known about the combined effect of microgravity and ionizing radiation on bacterial community response when species are interdependent through exchange of metabolites in fluid medium (cross-feeding). Microgravity is expected to slow interspecies mass transfer and growth in cross-feeding communities in the low-shear, diffusion-limited environment, while ionizing radiation may influence stress response to direct (DNA damage) and indirect damage (ROS). Using a well-understood, two-species (Escherichia coli and Salmonella enterica) microbial community engineered to be a model for studying cross-feeding, we simulated galactic cosmic rays (GCRsim) and microgravity to test the hypothesis: exposure to ionizing radiation causes cell damage or stress, altering transcriptomic community responses in metabolically interdependent cells, which is exacerbated by microgravity. We expect to see differential gene expression between cross-feeding and non-cross-feeding communities. We measured GCRsim effects on growth and gene expression in well-mixed versus simulated-microgravity conditions and in cross-feeding and non-cross-feeding medium. Microbial cultures were inoculated into liquid medium in rotating wall vessels (RWV) with different rotation rates: 5 RPM (simulated microgravity) and 50 RPM (well-mixed). The E. coli-S. enterica consortium, under simulated microgravity, were exposed to 500 mGy of Simplified 5-ion Galactic Cosmic Ray Simulation for 2 hours at Brookhaven National Lab. We harvested samples 40 minutes after irradiation for extraction and sequencing (NASA GeneLab). Here we present the differential gene expression analysis results, which reveal altered transcriptomic community responses, even where growth rate differences are not observed. Gene expression of these actively metabolizing microbial communities in GCRsim may illuminate molecular mechanisms of microbial interactions in space. Understanding how microbial community gene expression, metabolism, and other cellular processes are influenced by spaceflight stressors can inform the use of microbes in human life support for low Earth orbit missions and beyond.

microgravity↗

ON THE ABSENCE OF HIGH METALLICITY-HIGH COLUMN DENSITY DAMPED Ly{alpha} SYSTEMS: MOLECULE FORMATION IN A TWO-PHASE INTERSTELLAR MEDIUM

We argue that the lack of observed damped Ly{alpha} (DLA) systems that simultaneously have high H I column densities and high metallicities results naturally from the formation of molecules in the cold phase of a two-phase atomic medium in pressure balance. Our result applies equally well in diffuse systems where the ultraviolet radiation field is dominated by the extragalactic background and in dense star-forming ones, where the local radiation field is likely to be orders of magnitude higher. We point out that such a radiation-insensitive model is required to explain the absence of high column-high metallicity systems among DLAs observed using gamma-ray burst (GRB) afterglows, since these are likely subjected to strong radiation fields created by active star formation in the GRB host galaxy. Moreover, we show that the observed relationship between the maximum atomic gas column in DLAs sets a firm upper limit on the fraction of the mass in these systems that can be in the warm, diffuse phase. Finally, we argue that our result explains the observed lack of in situ star formation in DLA systems.

99 GENERAL AND MISCELLANEOUS↗

Interaction of atomic and low-energy deuterium with tungsten pre-irradiated with self-ions

Polycrystalline tungsten (W) specimens were pre-irradiated with self-ions to create identical samples with high density of defects up to ∼2.5 μm near the surface. Then, W specimens were exposed to either thermal atomic deuterium (D) beam with an incident energy of ∼0.2 eV or low energy D plasma with the incident energy varied between 5 and 200 eV at different sample temperatures. Each sample was exposed once at certain temperature and fluence. The D migration and accumulation in W were studied post-mortem by nuclear reaction method. It was shown that the rate of the D to occupy radiation-induced defects increases with increasing the incident energy, ion flux, and temperature. Experimental investigation was accompanied by modelling using the rate-equation model. Moreover, the analytical model was developed and benchmarked against numerical model. The calculations of the deuterium diffusion with trapping at radiation-induced defects in tungsten by analytical model are consistent with numerical calculations using rate-equation model. The data of reflection and penetration of atomic and low-energy D were taking from calculations using molecular dynamics (MD) with Juslin interatomic potentials and a binary collision code TRIM. MD calculations show an agreement with a binary collision code TRIM only in a very narrow range of deuterium energies between 1 and 20 eV. Incorporation of the data of reflection and penetration of deuterium in the macroscopic modelling has been done to verify the range of validity of calculations using MD and binary collision code TRIM by comparison of modelling results with experimental data. Modelling results are consistent with experiments using reflection and penetration data of D obtained from TRIM code for incident ion energy above 1 eV. Otherwise, the parameters obtained from MD should be incorporated in the rate-equation model to have a good agreement with the experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NONTHERMAL RADIATION FROM COSMIC-RAY MODIFIED SHOCKS

We calculate nonthermal radiation from cosmic-ray (CR) protons and electrons accelerated at CR modified plane and spherical shocks, using time-dependent, diffusive shock acceleration (DSA) simulations that include radiative losses of CR electrons. Strong non-relativistic shocks with physical parameters relevant for young supernova remnants (SNRs) are considered in both the plane-parallel and spherically symmetric geometries, and compared at times when their dynamical and CR properties are concordant. A thermal leakage injection model and a Bohm-like diffusion coefficient are adopted. After DSA energy gains balance radiative losses, the electron spectrum at the plane shock approaches a time-asymptotic spectrum with a super-exponential cutoff above the equilibrium momentum. The postshock electron spectrum cuts off at a progressively lower momentum downstream from the shock due to the energy losses. That results in the steepening of the volume integrated electron energy spectrum by one power of the particle energy. These features evolve toward lower energies in the spherical, SNR shocks. In a CR modified shock, pion decay gamma-ray emission reveals distinct signatures of nonlinear DSA due to the concave proton momentum spectrum. Although the electron momentum spectrum has a much weaker concavity, the synchrotron spectral slope at the shock may flatten by about 0.1-0.3 between radio and X-ray bands. The slope of the volume integrated emission spectrum behaves nonlinearly around the break frequency.

79 ASTRONOMY AND ASTROPHYSICS↗