Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integrated Applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

LSST system analysis and integration task for an advanced science and application space platform

To support the development of an advanced science and application space platform (ASASP) requirements of a representative set of payloads requiring large separation distances selected from the Science and Applications Space Platform data base. These payloads were a 100 meter diameter atmospheric gravity wave antenna, a 100 meter by 100 meter particle beam injection experiment, a 2 meter diameter, 18 meter long astrometric telescope, and a 15 meter diameter, 35 meter long large ambient deployable IR telescope. A low earth orbit at 500 km altitude and 56 deg inclination was selected as being the best compromise for meeting payload requirements. Platform subsystems were defined which would support the payload requirements and a physical platform concept was developed. Structural system requirements which included utilities accommodation, interface requirements, and platform strength and stiffness requirements were developed. An attitude control system concept was also described. The resultant ASASP concept was analyzed and technological developments deemed necessary in the area of large space systems were recommended.

Source record↗
NASA NTRS1987

Robust eigenstructure assignment by a projection method: Application using multiple optimization criteria

New ideas which lead to feedback control laws for large flexible structures which are insensitive to model uncertainty are presented. A pole placement method is presented which leads to near-unitary closed loop eigenvectors, and a new method is introduced to design the control while simultaneously considering three competing measures of optimality. Robustness versus Integral algorithms are applicable to at least moderately high-dimensioned systems. In the present discussion, controls for two coupled flexible bodies are considered. A 6x24 gain matrix is designed to control a 12 modes system using 6 actuators. Researchers also developed control laws for the R2P2 simulator at Martin Marietta; in this case 3 actuators are used to control a 12th order system. Simulation studies indicate that researchers indeed achieved robust designs without significant difficulties associated with spillover into the uncontrolled modes. Here, several key ideas and numerical results are given. In the references, details of the formulation, discussions of salient features, and connection to the availiable literature are given.

Junkins, J. L.↗
NASA NTRS1991

Process control integration requirements for advanced life support systems applicable to manned space missions

An overview of recent developments in process-control technology which might have applications in future advanced life support systems for long-duration space operations is presented. Consideration is given to design criteria related to control system selection and optimization, and process-control interfacing methodology. Attention is also given to current life support system process control strategies, innovative sensors, instrumentation and control, and innovations in process supervision.

Spurlock, Paul↗
NASA NTRS1992

Active CPW-fed slot antennas for power combining applications

We have combined integrated circuit antenna technology with microwave oscillator design to build an active slot-oscillator. The design is planar, does not require via holes and is compatible with monolithic transistor technology. The CPW-fed antenna impedance is calculated using a full-wave analysis technique. Slot-oscillators were built at 7, 13, and 22 GHz, and the predicted oscillation frequencies agree well with experiments. The design is easily scaled to millimeter-wave frequencies and can be extended to power combining arrays.

Kormanyos, Brian K.↗
NASA NTRS1995

A new RF package suitable for aeronautical commercial and DSCS satellite applications

Higher levels of integration through the use of GaAs and silicon MMIC devices, a die-cast housing, and the reduction of the number of subassemblies has enabled a large reduction of the size and weight of the electronics package for commercial and military satellite communications. This paper presents an electronics architecture and hardware that utilizes many new integrated circuits and design techniques, and allows flexibility for future satellite frequency changes and expansion. Key features of the radio are extended C-band, InSat, Defense Satellite Communications System (DSCS), and Ku-band coverage options; 70 (or 140) MHz transponder bandwidth or L-band block bandwidth IFs; integrated RS-232 control through local handheld terminal or remote computer; remote control of crystal reference oscillator for aging and temperature compensation; integrated 2 or 5 watt solid-state power amplifiers (SSPA); optional integrated solid-state booster amplifiers to 40 watts; optional external amplifiers to 100 watts; integral beacon tracking with second integrated downcoverter for antenna positioning; radio, including low-noise block converter (LNB) and SSPA, weighs 8.5 kg and measures 32 x 23 x 16.5 cm; environmentally ruggedized for -40 to +60 C; O-ring sealed for waterproofing; passive (convection) cooling; and simple cabling and installation, with a single cable between radio and LNB, and two cables between radio and IF interface. The small size and light weight of the radio make it ideal for mounting on stabilized antenna platforms (gyroscopic or servo). Several input power options (110 or 220 VAC; +48, +12, or -24 VDC) facilitate operation on multiple platforms.

Hamilton, Robert J., Jr.↗
NASA NTRS2003

The Application of Lidar to Synthetic Vision System Integrity

One goal in the development of a Synthetic Vision System (SVS) is to create a system that can be certified by the Federal Aviation Administration (FAA) for use at various flight criticality levels. As part of NASA s Aviation Safety Program, Ohio University and NASA Langley have been involved in the research and development of real-time terrain database integrity monitors for SVS. Integrity monitors based on a consistency check with onboard sensors may be required if the inherent terrain database integrity is not sufficient for a particular operation. Sensors such as the radar altimeter and weather radar, which are available on most commercial aircraft, are currently being investigated for use in a real-time terrain database integrity monitor. This paper introduces the concept of using a Light Detection And Ranging (LiDAR) sensor as part of a real-time terrain database integrity monitor. A LiDAR system consists of a scanning laser ranger, an inertial measurement unit (IMU), and a Global Positioning System (GPS) receiver. Information from these three sensors can be combined to generate synthesized terrain models (profiles), which can then be compared to the stored SVS terrain model. This paper discusses an initial performance evaluation of the LiDAR-based terrain database integrity monitor using LiDAR data collected over Reno, Nevada. The paper will address the consistency checking mechanism and test statistic, sensitivity to position errors, and a comparison of the LiDAR-based integrity monitor to a radar altimeter-based integrity monitor.

Campbell, Jacob L.↗
NASA NTRS2014

Asteroid Crewed Segment Mission Lean Development

The next generation of human spaceflight missions presents numerous challenges to designers that must be addressed to produce a feasible concept. The specific challenges of designing an exploration mission utilizing the Space Launch System and the Orion spacecraft to carry astronauts beyond earth orbit to explore an asteroid stored in a distant retrograde orbit around the moon will be addressed. Mission designers must carefully balance competing constraints including cost, schedule, risk, and numerous spacecraft performance metrics including launch mass, nominal landed mass, abort landed mass, mission duration, consumable limits and many others. The Asteroid Redirect Crewed Mission will be described along with results from the concurrent mission design trades that led to its formulation. While the trades presented are specific to this mission, the integrated process is applicable to any potential future mission. The following trades were critical in the mission formulation and will be described in detail: 1) crew size, 2) mission duration, 3) trajectory design, 4) docking vs grapple, 5) extravehicular activity tasks, 6) launch mass and integrated vehicle performance, 7) contingency performance, 8) crew consumables including food, clothing, oxygen, nitrogen and water, and 9) mission risk. The additional Orion functionality required to perform the Asteroid Redirect Crewed Mission and how it is incorporated while minimizing cost, schedule and mass impacts will be identified. Existing investments in the NASA technology portfolio were leveraged to provide the added functionality that will be beneficial to future exploration missions. Mission kits are utilized to augment Orion with the necessary functionality without introducing costly new requirements to the mature Orion spacecraft design effort. The Asteroid Redirect Crewed Mission provides an exciting early mission for the Orion and SLS while providing a stepping stone to even more ambitious missions in the future.

Gard, Joe↗
DOE OSTI2017

Determination of a Generic Human Error Probability Distribution, Part 2: A Dynamic SPAR-H Example Application

Humans are an integral part of a nuclear power plant (NPP) from its construction, to its everyday maintenance and operation. In the nuclear industry there are many approaches to quantifying component reliability, which is called probability risk assessment (PRA). In PRA there are two considerations given to the quantification, static and dynamic. Static is quantified before or after an operation; and dynamic is time dependent, in that the probability changes as real time data are provided. In PRA, the importance of the components is calculated, but what of the importance of the human component? There are several methods for human reliability analysis (HRA), which include but are not limited to: THERP, ATHEANA, CREAM, SPAR-H, ASEP, and SLIM. Each of these methods aims to provide a more accurate and objective human error probability (HEP) quantification. Of the methods listed above, ASEP, THERP, and SPAR-H are all inextricably linked. The Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) method was generated to better generalize the Technique for Human Error Rate Prediction (THERP) and Accident Sequence Precursor (ASEP). THERP is mapped to specific scenario templates, and ASEP is a simplified screening method, while SPAR-H employs generalizations to describe the spectrum of human behavior while maintaining the same theoretical underpinnings. SPAR-H is a well-known and accepted HRA method that uses performance shaping factors (PSFs) to classify inputs to the human component. PSFs capture a wide variety of input data, including plant status, crew dynamics, task description, and psychological aspects of the human operator. Current efforts have been focused to further generalize SPAR-H in to a dynamic framework. These methods can fit into dynamic NPP simulations such as RAVEN / RELAP-7. In order to do this, a dynamic methodology is applied to model the human as would be applied to the components. This method is applied in part one in the accompanying paper.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗