Search NASA⌕ Search

SEARCH · Search NASA

Results for “REDOX PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electroluminescence from Single-Walled Carbon Nanotubes with Quantum Defects

Individual single-walled carbon nanotubes with covalent sidewall defects have emerged as a class of photon sources whose photoluminescence spectra can be tailored by the carbon nanotube chirality and the attached functional group/molecule. Here we present electroluminescence spectroscopy data from single-tube devices based on (7, 5) carbon nanotubes, functionalized with dichlorobenzene molecules, and wired to graphene electrodes. We observe electrically generated, defect-induced emissions that are controllable by electrostatic gating and strongly red-shifted compared to emissions from pristine nanotubes. The defect-induced emissions are assigned to excitonic and trionic recombination processes by correlating electroluminescence excitation maps with electrical transport and photoluminescence data. At cryogenic conditions, additional gate-dependent emission lines appear, which are assigned to phonon-assisted hot-exciton electroluminescence from quasi-levels. Similar results were obtained with functionalized (6, 5) nanotubes. We also compare functionalized (7, 5) electroluminescence data with photoluminescence of pristine and functionalized (7, 5) nanotubes redox-doped using gold(III) chloride solution. This work shows that electroluminescence excitation is selective toward neutral defect-state configurations with the lowest transition energy, which in combination with gate-control over neutral versus charged defect-state emission leads to high spectral purity.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Biological modulation of planetary atmospheres: The early Earth scenario

The establishment and subsequent evolution of life on Earth had a profound impact on the chemical regime at the planet's surface and its atmosphere. A thermodynamic gradient was imposed on near-surface environments that served as the driving force for a number on important geochemical transformations. An example is the redox imbalance between the modern atmosphere and the material of the Earth's crust. Current photochemical models predict extremely low partial pressures of oxygen in the Earth's prebiological atmosphere. There is widespread consensus that any large-scale oxygenation of the primitive atmosphere was contingent on the advent of biological (autotrophic) carbon fixation. It is suggested that photoautotrophy existed both as a biochemical process and as a geochemical agent since at least 3.8 Ga ago. Combining the stoichiometry of the photosynthesis reaction with a carbon isotope mass balance and current concepts for the evolution of the stationary sedimentary mass as a funion of time, it is possible to quantify, the accumulation of oxygen and its photosynthetic oxidation equivalents through Earth history.

Schidlowski, M.↗
DOE OSTI2022

Allosteric control of electron transfer in nitrogenase and nitrogenase-like enzymes (Final Report)

More than a third of all known proteins to date are either oxidoreductases or metalloproteins. The diversity of metal cofactors and redox centers in these proteins make them attractive candidates for engineering protein-based biocatalysts, biosensors, and biofuel cells, among other necessary tools for the bioeconomy. Many of these enzymes function as large multi-subunit complexes arranged as symmetric or asymmetric assemblies, and the purpose of this architecture is unclear. The goal of the project was to address this fundamental question by investigating the mechanism of action of two oxidoreductases: Nitrogenase and DPOR (Dark-Operative Protochlorophyllide Oxidoreductase, a nitrogenase-like oxidoreductase). Nitrogenase and DPOR play key roles in nitrogen fixation and photosynthesis, processes essential to sustaining life. Both proteins are arranged as two symmetrical halves with each half capable of substrate reduction. For more than half a century, substrate reduction by nitrogenase has been presumed to occur independently within the two identical halves. Funded by this DOE grant we have now shown that both nitrogenase and DPOR function asymmetrically. Electron transfer in one half suppresses activity in the other. Thus, we have demonstrated that the two halves do not function in an independent manner; rather, catalytic events in one-half allosterically suppress activity and electron transfer (ET) in the other. This alternating-site mechanism has significant implications on our current understanding of substrate reduction by these enzymes and offers a new mechanistic paradigm for the reactions they catalyze. Our work now provides a mechanistic map of the how the two symmetric catalytic halves work together to establish and maintain the sequential-site mechanism through multiple ET cycles to achieve substrate reduction. There is substantive need for bio-inspired tools that enable reduction of nitrogen and other substrates, as well as photosynthesis, for energy and food production. Understanding the workings of enzymes like nitrogenase and DPOR that mediate multi-electron redox chemistry is vital for designing such synthetic tools. The timing of our research coincides with the biotechnological breakthrough of light-driven artificial N2 reduction by nitrogenase, achieved using the native enzyme with both halves arranged in a mirror-like architecture as catalyst. Together with such discoveries, our research now reveal unknown facets of the reaction mechanism and hold promise for designing more effective catalysts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Identification of key oxidative intermediates and the function of chromium dopants in PKU-8: catalytic dehydrogenation of sec-alcohols with tert-butylhydroperoxide

Catalytic oxidation using green oxidants has played an important role in modern chemical engineering, however the in-situ generated active groups and the related catalytic mechanism need to be further understood. Combined with several measurements, such as isotopic tracers, molecular probes and cycle voltammetry, chromium ions were observed to undergo a Cr 3+ –Cr 2+ –Cr 3+ redox cycle. Simultaneously, t-BuOO* groups are generated in a large quantity and seem to function as the most critical active species to enhance the dehydrogenation of sec-alcohols when using TBHP as oxidant. DFT calculations give an energetically favorable pathway for TBHP activation, agreeing well with the obtained catalytic results. Here, a reaction scheme was finally proposed to interpret the probable mechanistic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Highly Selective Oxygen Reduction to Hydrogen Peroxide on a Carbon-Supported Single-Atom Pd Electrocatalyst

Selective electrochemical two-electron oxygen reduction is a promising route for renewable and on-site H 2 O 2 generation as an alternative to the anthraquinone process. In this study, we report a high-performance nitrogen-coordinated single-atom Pd electrocatalyst, which is derived from Pd-doped zeolitic imidazolate frameworks (ZIFs) through one-step thermolysis. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) combined with X-ray absorption spectroscopy verifies atomically dispersed Pd atoms on nitrogen-doped carbon (Pd-NC). The single-atom Pd-NC catalyst exhibits excellent electrocatalytic performance for two-electron oxygen reduction to H 2 O 2 , which shows ~95% selectivity toward H 2 O 2 and an unprecedented onset potential of ~0.8 V versus revisable hydrogen electrode (RHE) in 0.1 M KOH. Density functional theory (DFT) calculations demonstrate that the Pd-N 4 catalytic sites thermodynamically prefer *–O bond breaking to O–O bond breaking, corresponding to a high selectivity for H 2 O 2 production. This work provides a deep insight into the understanding of the catalytic process and design of high-performance 2e– ORR catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ternary and Quaternary Nickel-Iron-Oxide-Based Thin Films as Oxygen Evolution Reaction Catalysts in Alkaline Media

Alkaline water electrolyzers are a promising technology for energy storage and conversion through the electrochemical production of hydrogen, however the slow kinetics of the oxygen evolution reaction (OER) pose a major challenge. The alkaline environment enables the use of non-Pt-group metals as OER catalysts, in particular NiFe-based materials. In this study, Mn and/or Cr were elementally mixed with NiFe to further improve the OER catalyst properties through a controlled, systematic synthesis process involving thin films prepared by electron beam-induced physical vapor deposition (PVD). By exploring both simultaneous co-deposition and serial deposition of the different metals, the OER performance was investigated as a function of both the location of Mn or Cr in the multi-metal NiFe-based catalysts and the difference between surface versus bulk mixing. The distinct differences in the redox dynamics, surface oxidation, and stability of the seven studied catalysts reveal metal Cr- and/or Mn-overlayers as a promising synthesis approach for fine-tuning of catalyst properties and improving the OER performance.

Alkaline Water Electrolysis↗
DOE OSTI2023

Defect Quantification in Metal Halide Perovskites Anticipates Photoluminescence and Photovoltaic Performance

Semiconductor material optimization requires quantification of performance and stability-dependent near-valence maximum and near-conduction minimum defects with sufficient energy resolution and sensitivity. In this work, we utilize a spectroscopy-electrochemistry approach to resolve the energy-distinct donor and acceptor defect concentrations in wide-gap (Cs .05 FA .79 MA .16 )Pb(I .87 Br .13 ) 3 perovskites, benchmarked against photoluminescence and photovoltaic device performance. Monitoring charge transfer events to electron acceptor and donor molecules within solid electrolyte top contacts enables defect quantification below 10 15 cm –3 at an energy resolution of 10 meV under device-relevant bias, well below levels reported by other methods. Further method sensitivity is demonstrated for defects arising from <2% formamidinium concentration modifications, mimicking compositional imperfections resulting from nonoptimized processing. This method provides the first complete perovskite energetic diagrams with small changes in composition, is nondestructive, compatible with in-line processing characterization, and will enable the semiconductor community to link molecular origins of defects with limitations in device performance across a wide array of optoelectronic platforms.

14 SOLAR ENERGY↗
DOE OSTI2016

Different Functions of Phylogenetically Distinct Bacterial Complex I Isozymes

ABSTRACT NADH:quinone oxidoreductase (complex I) is a bioenergetic enzyme that transfers electrons from NADH to quinone, conserving the energy of this reaction by contributing to the proton motive force. While the importance of NADH oxidation to mitochondrial aerobic respiration is well documented, the contribution of complex I to bacterial electron transport chains has been tested in only a few species. Here, we analyze the function of two phylogenetically distinct complex I isozymes in Rhodobacter sphaeroides , an alphaproteobacterium that contains well-characterized electron transport chains. We found that R. sphaeroides complex I activity is important for aerobic respiration and required for anaerobic dimethyl sulfoxide (DMSO) respiration (in the absence of light), photoautotrophic growth, and photoheterotrophic growth (in the absence of an external electron acceptor). Our data also provide insight into the functions of the phylogenetically distinct R. sphaeroides complex I enzymes (complex I A and complex I E ) in maintaining a cellular redox state during photoheterotrophic growth. We propose that the function of each isozyme during photoheterotrophic growth is either NADH synthesis (complex I A ) or NADH oxidation (complex I E ). The canonical alphaproteobacterial complex I isozyme (complex I A ) was also shown to be important for routing electrons to nitrogenase-mediated H 2 production, while the horizontally acquired enzyme (complex I E ) was dispensable in this process. Unlike the singular role of complex I in mitochondria, we predict that the phylogenetically distinct complex I enzymes found across bacterial species have evolved to enhance the functions of their respective electron transport chains. IMPORTANCE Cells use a proton motive force (PMF), NADH, and ATP to support numerous processes. In mitochondria, complex I uses NADH oxidation to generate a PMF, which can drive ATP synthesis. This study analyzed the function of complex I in bacteria, which contain more-diverse and more-flexible electron transport chains than mitochondria. We tested complex I function in Rhodobacter sphaeroides , a bacterium predicted to encode two phylogenetically distinct complex I isozymes. R. sphaeroides cells lacking both isozymes had growth defects during all tested modes of growth, illustrating the important function of this enzyme under diverse conditions. We conclude that the two isozymes are not functionally redundant and predict that phylogenetically distinct complex I enzymes have evolved to support the diverse lifestyles of bacteria.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Sequence Programmable Order–Disorder Transitions in Supramolecular Assembly of Peptide Nanofibers

Protein–protein interactions determine the assembly of complexes that are responsible for numerous key biological processes. The assembly of many natural protein complexes is mediated by post-translational structural changes and environmental stimuli. In this study, we show that incorporation of adjacent lysine residues results in the pH-tunable stability of peptide secondary structure and assembly, allowing for the incorporation of complementary order-inducing motifs. The strategic placement of cysteine pairs in the same peptide sequence results in redox-dependent disulfide staple formation, inducing a transition from random coil to β-sheet conformation and subsequent supramolecular nanofiber assembly from otherwise disordered peptide monomers. Spectroscopic, imaging, molecular dynamics, and kinetic studies highlight the critical role of sequence motif location, oligomerization, and the competitive interplay between intra- and interpeptide disulfide bonding in determining assembly outcomes. We extend this approach to demonstrate phosphorylation-dependent assembly from the design of the same parent peptide sequence, suggesting a general approach to the design of diverse stimulus-responsive peptide sequences for supramolecular assembly. Furthermore, these findings also provide a framework for investigating sequence-dependent pathways in amyloid fiber formation with potential implications for neurodegenerative disease research.

Disulfides↗
DOE OSTI2020

Operando structural and chemical evolutions of TiS 2 in Na-ion batteries

Titanium disulfide (TiS 2 ) with high electric conductivity, fast rate capability, and good cycling performance is a promising candidate for electrode material in sodium (Na)-ion batteries. Despite the well-studied electrochemical behaviors of TiS 2 in Li-ion batteries, the detailed reaction mechanism of TiS 2 in Na-ion batteries is not yet fully understood due to a more complex multi-phase conversion process. In this work, reactions of TiS 2 in Na-ion batteries are investigated via a multi-modal synchrotron approach: operando X-ray Absorption Spectroscopy (XAS) – including X-ray Absorption Near-Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) – and ex situ X-ray Powder Diffraction (XPD), coupled with computational modeling. Operando XANES spectra indicate that the redox reactions occur in both Ti and S during the electrochemically driven phase transformation. Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) analysis of XAS suggests that different numbers of components are involved in the lithiation and sodiation of TiS 2 , with the sodiation including at least one intermediate phase in addition to the starting material and the final sodiation product. Ex situ XPD and Rietveld refinement further determined and quantified the unknown phases, showing that three phases, TiS 2 , Na 0.55 TiS 2 , and NaTiS 2 , participate in the sodiation of TiS 2 . Operando EXAFS results show the changes in the Ti–Ti coordination number and interatomic distance. This explains the coulombic efficiency decay due to the incomplete recovery of the coordination number of Ti after cycling. Overall, this work reveals the reaction mechanism occurring in Na–TiS 2 batteries with a greater quantitative understanding of the structural evolution. By combining the multi-modal synchrotron approach and computational work, this study provides a framework for studying a broader range of electrochemically driven phase-transformation systems towards advanced energy storage and conversion applications.

25 ENERGY STORAGE↗
DOE OSTI2026

Integrative SP3 Workflow for Multi-PTM Proteomics Profiling (TZ-DP0)

The goal of the experiment was to demonstrate that the optimized multiplexed multi-PTM profiling workflow can comprehensively and quantitatively capture dynamic changes in protein abundance, cysteine oxidation, phosphorylation, and acetylation in cytokine-induced inflammatory stress in mouse pancreatic ß-cells. Global proteomic, redox proteomic, phosphoproteomic, and acetylomic were data collected from mouse Beta-TC-6 pancreatic Beta-cells, untreated (mock) and cytokine-treated Beta-cells at 4, 8, and 24 hours with 4 biological replicates. Samples were digested with trypsin and Lys-C, then analyzed by LC-MS/MS. Data were searched with MS-GF+, MASIC, and MaxQuant using PNNL's DMS processing pipeline.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Electrochemical Random-Access Memory: Progress, Perspectives, and Opportunities

Non-von Neumann computing using neuromorphic systems based on analogue synaptic and neuronal elements has emerged as a potential solution to tackle the growing need for more efficient data processing, but progress toward practical systems has been stymied due to a lack of materials and devices with the appropriate attributes. Recently, solid state electrochemical ion-insertion, also known as electrochemical random access memory (ECRAM) has emerged as a promising approach to realize the needed device characteristics. ECRAM is a three terminal device that operates by tuning electronic conductance in functional materials through solid-state electrochemical redox reactions. This mechanism can be considered as a gate-controlled bulk modulation of dopants and/or phases in the channel. Early work demonstrating that ECRAM can achieve nearly ideal analogue synaptic characteristics has sparked tremendous interest in this approach. More recently, the realization that electrochemical ion insertion can be used to tune the electronic properties of many types of materials including transition metal oxides, layered two-dimensional materials, organic and coordination polymers, and that the changes in conductance can span orders of magnitude has further attracted interest in ECRAM as the basis for analogue synaptic elements for inference accelerators as well as for dynamical devices that can emulate a wide range of neuronal characteristics for implementation in analogue spiking neural networks. At its core, ECRAM shares many fundamental aspects with rechargeable batteries, where ion insertion materials are used extensively for their ability to reversibly store charge and energy. Computing applications, however, present drastically different requirements: systems will require many millions of devices, scaled down to tens of nanometers, all while achieving reliable electronic-state tuning at scaled-up rates and endurances, and with minimal energy dissipation and noise. Further, in this review, we discuss the history, basic concepts, recent progress, as well as the challenges and opportunities for different types of ECRAM, broadly grouped by their primary mobile ionic charge carrier, including Li, protons, and oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

From tides to seasons: How cyclic tidal drivers and plant physiology interact to affect carbon cycling at the terrestrial-estuarine boundary (Final technical report)

Coastal ecosystems are among the most biologically and biogeochemically active and diverse systems on Earth. Because they act as important linkages between terrestrial ecosystems and the open ocean, their incorporation in Earth system models (ESMs) is critical to predict coastal and global responses to environmental changes. However, they vary greatly in the magnitude of tides and the volume and timing of freshwater input from land, making it challenging to model the major biogeochemical reactions that control productivity and greenhouse gas emissions across coastal terrestrial aquatic interfaces (TAIs). Our overall objective was to improve mechanistic process understanding and modeling of tidal wetland hydro-biogeochemistry in coastal TAIs. We established a new flux tower site (Ameriflux US-PLo) in the oligohaline part of the Parker River to continuously monitor ecosystem-scale carbon fluxes under temporally varying salinity conditions. The site is co-located with long-term monitoring plots of the Plum Island Ecosystems LTER project. We installed wells and redox sensors in the marsh interior and creek bank, established biomass monitoring plots and deployed novel optode sensors in both locations. We used this data to parameterize plant-mediated transport in PFLOTRAN and tested the impact of soil heterogeneity on porewater constituents and gas fluxes. We collected observations of root oxygen release with a novel planar optode system in the field. Flux data collected during the measurement period encompasses a large variation in salinity ranging from drought to record precipitation years. We developed a method to extract functional relationships from the flux data using artificial neural networks, identifying salinity thresholds for CH 4 fluxes. Finally, we are using the coupled ELM-PFLOTRAN model to test the impact of antecedent hydrological conditions on the salinity-CH 4 flux relationship. This grant contributed to the professional development of one postdoc, three research assistants and one graduate student. The sensor data has been shared with external collaborators.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2007

NASA Tech Briefs, August 2007

Topics include: Program Merges SAR Data on Terrain and Vegetation Heights; Using G(exp 4)FETs as a Data Router for In-Plane Crossing of Signal Paths; Two Algorithms for Processing Electronic Nose Data; Radiation-Tolerant Dual Data Bus; General-Purpose Front End for Real-Time Data Processing; Nanocomposite Photoelectrochemical Cells; Ultracapacitor-Powered Cordless Drill, Cumulative Timers for Microprocessors; Photocatalytic/Magnetic Composite Particles; Separation and Sealing of a Sample Container Using Brazing; Automated Aerial Refueling Hitches a Ride on AFF; Cobra Probes Containing Replaceable Thermocouples; High-Speed Noninvasive Eye-Tracking System; Detergent-Specific Membrane Protein Crystallization Screens; Evaporation-Cooled Protective Suits for Firefighters; Plasmonic Antenna Coupling for QWIPs; Electronic Tongue Containing Redox and Conductivity Sensors; Improved Heat-Stress Algorithm; A Method of Partly Automated Testing of Software; Rover Wheel-Actuated Tool Interface; and Second-Generation Electronic Nose.

Source record↗
DOE OSTI2016

Battery Relevant Electrochemistry of Ag 7 Fe 3 (P 2 O 7 ) 4 : Contrasting Contributions from the Redox Chemistries of Ag + and Fe 3+

Ag 7 Fe 3 (P 2 O 7 ) 4 is an example of an electrochemical displacement material which contains two different electrochemically active metal cations, where one cation (Ag + ) forms metallic silver nanoparticles external to the crystals of Ag 7 Fe 3 (P 2 O 7 ) 4 via an electrochemical reduction displacement reaction, while the other cation (Fe +3 ) is electrochemically reduced with the retention of iron cations within the anion structural framework concomitant with lithium insertion. These contrasting redox chemistries within one pure cathode material enable high rate capability and reversibility when Ag 7 Fe 3 (P 2 O 7 ) 4 is employed as cathode material in a lithium ion battery (LIB). Further, pyrophosphate materials are thermally and electrically stable, desirable attributes for cathode materials in LIBs. In this article, a bimetallic pyrophosphate material Ag 7 Fe 3 (P 2 O 7 ) 4 is synthesized and confirmed to be a single phase by Rietveld refinement. Electrochemistry of Ag 7 Fe 3 (P 2 O 7 ) 4 is reported for the first time in the context of lithium based batteries using cyclic voltammetry and galvanostatic discharge–charge cycling. The reduction displacement reaction and the lithium (de)insertion processes are investigated using ex situ X-ray absorption spectroscopy and X-ray diffraction of electrochemically reduced and oxidized Ag 7 Fe 3 (P 2 O 7 ) 4 . Ag 7 Fe 3 (P 2 O 7 ) 4 exhibits good reversibility at the iron centers indicated by ~80% capacity retention over 100 cycles following the initial formation cycle and excellent rate capability exhibited by ~70% capacity retention upon a 4-fold increase in current.

25 ENERGY STORAGE↗
DOE OSTI2017

Fluorination of Lithium‐Excess Transition Metal Oxide Cathode Materials

Abstract Fluorination of Li‐ion cathode materials is of significant interest as it is claimed to lead to significant improvements in long‐term reversible capacity. However, the mechanism by which LiF incorporates and improves performance remains uncertain. Indeed, recent evidence suggests that fluorine is often present as a coating layer rather than incorporated into the bulk of the material. In this work, first‐principles calculations are used to investigate the thermodynamics of fluorination in transition metal oxide cathodes to determine the conditions under which bulk fluorination is possible. It is found that unlike classic well‐ordered cathodes, which cannot incorporate fluorine, disordered rock salt‐structured materials achieve significant fluorination levels due to the presence of locally metal‐poor, lithium‐rich environments that are highly preferred for fluorine. As well as explaining the fluorination process in known materials, this finding is encouraging for the development of new disordered rock salt lithium‐excess transition metal oxides, a promising new class of Li‐ion battery cathode materials that offer superior practical capacity to traditional layered oxides. In particular, it is found that bulk fluorination may serve as an alternative source of Li‐excess in these compounds that can replace the conventional substitution of a heavy redox‐inactive element on the transition metal sublattice.

Richards, William D.↗
DOE OSTI2021

Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.

CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.

Wang, Wennie↗
DOE OSTI2021

Enhancing the performance of lithium oxygen batteries through combining redox mediating salts with a lithium protecting salt

Li–O 2 batteries have recently emerged to meet nowadays elevated electric energy demands. Redox mediators (RMs) for solution-inducing decomposition of discharge products are one approach to increase energy efficiency and reduce high overpotentials in these batteries. However, multiple obstacles hinder their usage such as redox shuttling, capacity fading, electrolyte degradation, etc. Herein, we present a new chemistry based on a combination of LiNO 3 , TEGDME and an ionic liquid that enables LiI (1 M) to lower the charge potential (3.5V) with a long cycle life of 270 cycles. 0.1 M LiI increases the cyclability up to 500 with a slightly increased charge potential (~4V) for a fixed capacity of 1000 mAh/g. Up to 100 cycles, this battery system retained ~95% Li 2 O 2 capacity with a ~0.8 V charge-discharge polarization gap. The addition of LiNO 3 to the electrolyte provides a protective solid electrolyte interface (SEI) on anode that works in synergy with the LiI RM. Moreover, we found that this electrolyte blend results in domain formation of ionic and neutral species enhancing the discharge and charge processes. Finally, DFT calculations provide a better understanding of the role of the anode SEI layer and the Li 2 O 2 decomposition promoted by the LiI during charge on the cathode.

25 ENERGY STORAGE↗