Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A graded catalytic–protective layer for an efficient and stable water-splitting photocathode

Achieving solar-to-hydrogen efficiencies above 15% is key for the commercial success of photoelectrochemical water splitting devices. While tandem cells can reach those efficiencies, increasing the catalytic activity and long-term stability remains a significant challenge. We show that annealing a bilayer of amorphous titanium dioxide (TiO x ) and molybdenum sulfide (MoS x ) deposited onto GaInP 2 results in a photocathode with high catalytic activity (current density of 11 mA/cm -2 at 0 V vs. the reversible hydrogen electrode under 1 sun illumination) and stability (retention of 80% of initial photocurrent density over a 20 h durability test) for the hydrogen evolution reaction. Microscopy and spectroscopy reveal that annealing results in a graded MoS x /MoO x /TiO 2 layer that retains much of the high catalytic activity of amorphous MoS x but with stability similar to crystalline MoS 2 . These findings demonstrate the potential of utilizing a hybridized, heterogeneous surface layer as a cost-effective catalytic and protective interface for solar hydrogen production.

14 SOLAR ENERGY↗

Interaction of hydrogen with actinide dioxide (011) surfaces

The corrosion and oxidation of actinide metals, leading to the formation of metal-oxide surface layers with the catalytic evolution of hydrogen, impacts the management of nuclear materials. In this work, the interaction of hydrogen with actinide dioxide (AnO 2 , An = U, Np, or Pu) (011) surfaces by Hubbard corrected density functional theory (PBEsol+U) has been studied, including spin–orbit interactions and non-collinear 3k anti-ferromagnetic behavior. The actinide dioxides crystalize in the fluorite-type structure, and although the (111) surface dominates the crystal morphology, the (011) surface energetics may lead to more significant interaction with hydrogen. The dissociative adsorption of hydrogen on the UO 2 (0.44 eV), NpO 2 (-0.47 eV), and PuO 2 (-1.71 eV) (011) surfaces has been calculated. It is found that hydrogen dissociates on the PuO 2 (011) surface; however, UO 2 (011) and NpO 2 (011) surfaces are relatively inert. Recombination of hydrogen ions is likely to occur on the UO 2 (011) and NpO 2 (011) surfaces, whereas hydroxide formation is shown to occur on the PuO 2 (011) surface, which distorts the surface structure.

36 MATERIALS SCIENCE↗

Interface creation on a mixed-terminated perovskite surface

In the field of complex oxide heterostructures, understanding of the initial substrate surface can be critical to fundamental studies regarding the development of emergent properties at the film–substrate interface. For this reason, a considerable amount of effort has gone into the development of techniques to achieve surfaces with single termination for a variety of perovskite single crystals. However, a decisive understanding of how an interface is created when epitaxial growth occurs on a mixed terminated surface remains lacking. Employing in situ synchrotron X-ray scattering during thin film growth by molecular beam epitaxy, we investigate the initial stages of growth on (LaAlO 3 )(Sr 2 AlTaO 6 ) (001) substrates with mixed termination. Using LaNiO 3 as a model system, we find that the surface layers of the substrate restructure during deposition such that while a NiO 2 monolayer is weakly bound, a LaO monolayer bonds strongly, effectively incorporating with (Al, Ta)O 2 from the surface and forming a La(Al, Ta)O 3 ultrathin film. <!--/abstract content--><!--fulltext content--> With regard to the synthesis of high-quality complex oxide heterostructures, it is important that the substrate meet an array of criteria related to the crystal structure, lattice parameter, thermodynamic properties, electrical and optical properties, and so on. In particular, the surface of the substrate should be atomically smooth and exhibit the step-terrace structure ideal for epitaxial thin film growth. Perovskite oxides with the formula ABO 3 have two possible (001) surfaces: AO (A-site termination) and BO 2 (B-site termination). The ability to consistently achieve one of these surface terminations on SrTiO 3 , i.e., TiO 2 , has helped SrTiO 3 become the predominant oxide in the field.

36 MATERIALS SCIENCE↗

Determination of the parameters of a holographic layer from its spectral characteristics

Methods for estimating the main parameters of holographic sensors (refractive index modulation depth and hologram thickness) from transmission spectra in the absence of absorption and light scattering are discussed. The consideration is performed for layers oriented parallel to the holographic layer surface under normal light incidence. Direct numerical solution of the problem of light propagation in a periodic nonabsorbing medium is used to study the reflection and transmission spectra of the holographic layer in a wide range of variation in its thickness and the refractive index modulation depth. A classification of the reflection regimes from the holographic layer is proposed (from weak reflection to the photonic crystal regime). A comparison with the results obtained by the coupled-wave analysis is performed, and the limitations of this method at a significant spectral detuning from resonance and under conditions of strong reflection are revealed. It is shown that the main hologram parameters can be estimated from the experimental transmission spectrum of the phase hologram (in the case of strong reflection) based on the spectral dip parameters. (holographic sensors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evidence for anti-synergism between ion-assisted etching and in-plasma photoassisted etching of silicon in a high-density chlorine plasma

Etching of p-Si in 60 mTorr 10%Cl2/90%Ar Faraday-shielded inductively coupled high density plasmas was investigated under both ionassisted etching (IAE) and photoassisted etching (PAE) conditions. Real-time etching rates and after-etching Si surface chemical compositions were obtained by laser interferometry and vacuum-transfer x-ray photoelectron spectroscopy (XPS), respectively. Precisely controlled ion energy distributions (IEDs) were generated by applying pulsed negative DC bias on the conductive sample stage. Above a 36 eV threshold at a total flow rate of 250 SCCM, the IAE rate increased with the square root of the ion energy. In contrast to the DC bias, etching under RF bias did not exhibit a threshold ion energy because of the wide IED. XPS spectra revealed that the surface layer under PAE conditions had a significantly lower chlorine content, composed of only SiCl. Under IAE conditions, however, silicon dangling bonds (Si•), SiCl 2 , and SiCl 3 were found on the surface, in addition to SiCl, with a relative abundance of SiCl > SiCl 2 , and SiCl 3 . The absence of higher chlorides and Si• under PAE conditions suggested that vacuum ultraviolet photons and above threshold-energy ions interact with the surface very differently. By varying the duty cycle of the pulsed DC bias, it was found that the IAE rate scaled with the energetic ion dose, but only for low duty cycles. For higher duty cycles, the apparent IAE yield fell off with an increasing Cl coverage on the surface, as the duty cycle went up, which pointed to a negative synergy (antisynergism) between PAE and IAE as the explanation. This antisynergism was further supported by the observed decrease of the total etching rate with an increasing period of the pulsed DC bias. A plausible mechanism is that increasing the pulsing period causes more near-surface damage, creating more recombination centers that lead to a higher loss rate of electron-hole pairs through recombination, thereby reducing the PAE rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of surface roughness on the microwave emission from soils

The effect of surface roughness on the brightness temperature of a moist terrain was studied through the modification of Fresnel reflection coefficient and using the radiative transfer equation. The modification involves introduction of a single parameter to characterize the roughness. It is shown that this parameter depends on both the surface height variance and the horizontal scale of the roughness. Model calculations are in good quantitative agreement with the observed dependence of the brightness temperature on the moisture content in the surface layer. Data from truck mounted and airborne radiometers are presented for comparison. The results indicate that the roughness effects are greatest for wet soils where the difference between smooth and rough surfaces can be as great as 50K.

Choudhury, B. J.↗

Effect of surface roughness on the microwave emission from soils

The effect of surface roughness on the brightness temperature of a moist terrain has been studied through the modification of Fresnel reflection coefficient and using the radiative transfer equation. The modification involves introduction of a single parameter to characterize the roughness. It is shown that this parameter depends on both the surface height variance and the horizontal scale of the roughness. Model calculations are in good quantitative agreement with the observed dependence of the brightness temperature on the moisture content in the surface layer. Data from truck mounted and airborne radiometers are presented for comparison. The results indicate that the roughness effects are great for wet soils where the difference between smooth and rough surfaces can be as great as 50 K.

Choudhury, B. J.↗

The evolution and growth of Al2O3 scales on beta-NiAl

The formation and growth of Al2O3 scales on (beta)-NiAl were studied using electron microscopy and other analytical techniques to gain an understanding of the oxidation properties of (beta)-NiAl and of alumina-forming alloys, in general. The transient and mature stages of oxidation were studied as well as the transformation stage during which the oxide scale transforms from metastable Al2O3 phases to the thermodynamically stable alpha-Al2O3 phase. The transient oxidation stages were studied at 800 deg C and for short times at 1100C. At 800C, the scales consist predominantly of delta-Al2O3 which forms by cation vacancy ordering in the defective spinel lattice of gamma-Al2O3. At 1100C, a fast-growth morphology of theta-Al2O3 forms as a surface layer over delta-Al2O3. For both oxidation temperatures, the scales are often epitaxially oriented with respect to the metal. The transient scales grow by outward cation diffusion as evidenced by surface growth morphologies. The transformation to alpha-Al2O3 occurs within 1 hour at 1100C by a nucleation and radial growth process. The large volume decrease associated with the transformation results in a highly strained alpha-Al2O3 microstructure. A change in scale growth mechanism from outward cation to inward anion diffusion allows transient surface morphologies to be smoothed by surface diffusion. The mature stage of oxidation involves the growth of an alpha-Al2O3 scale having the lacey morphology formed as a result of the gamma yields alpha transformation. Growth of the scale occurs by counterdiffusion along grain boundaries resulting in ridges formed by impingement of alpha-Al2O3 nuclei during the transformation stage. Also scale growth occurs by inward oxygen diffusion through healed cracks; the cracks result from transformation stresses. The measured growth rates of scales having the lacey morphology are an order of magnitude less than fine-grained alpha-Al2O3 scales. Metal orientations were found to have a large effect on oxide morpholoies during all stages of oxidation.

Doychak, J. K.↗

Microstructure Experiments-Enabled MARMOT Simulations of SiC/SiC-based Accident Tolerant Nuclear Fuel System

We have undertaken an experimental-computational project that addresses a few key technology gaps associated with the use of SiC/SiC composites for light water reactor fuel cladding. Two principal endeavors in this project are to assess the irradiation-induced microstructural changes and swelling in SiC/SiC composites, and to characterize and model the porous oxide surface layer (when exposed to steam) along SiC recession that is detrimental to the clad integrity under accident conditions. The project tasks are: (i) ion irradiation and characterization (University of Tennessee, Knoxville), (ii) mechanical tests and analysis (University of South Carolina), (iii) steam exposure tests (Oak Ridge National Laboratory), (iv) electron microscopy and spectroscopic characterization (NC State University), (v) x-ray microscopy and reconstruction (University of South Carolina and NC State University), (vi) phase field modeling and simulations (NC State University and Idaho National Laboratory). The effects of 10 MeV Au ion irradiation at 350°C on the microstructure evolution in SiC/SiC composites are investigated at doses up to 400 displacements per atom (dpa) at the University of Tennessee, Knoxville. Atomic force microscopy and optical profilometry reveal irradiation induced axial and radial shrinkage of the fibers for doses greater than 10 dpa. Based on detailed electron microscopy characterization, the primary cause of the fiber shrinkage is attributed to irradiation-induced loss of carbon packets. Additionally, the multilayer PyC interface is observed to portray high resistance to irradiation damage. The mechanical response and failure mechanisms of un-irradiated samples is also assessed through loading tests and X-ray imaging at the University of South Carolina. Steam exposure tests are performed at the Oak Ridge National Laboratory in a facility that represents a reactor pressure vessel under a loss-of-coolant-accident scenario. The samples that are analyzed methodically in this report are tested for 32/31 hours at 1200°C with a velocity of 0.25 cm/s for the pressures: 0.1 MPa, 0.45 MPa, 0.92 MPa and 1.38 MPa. Scanning/transmission electron microscopy analysis conducted at the NC State University (NCSU) shows that the oxide layer thickness increases with the steam pressure. While the oxide layer is crystalline (α- cristobalite) for the pressures 0.45 MPa, 0.92 MPa and 1.38 MPa, the layer is amorphous at 0.1 MPa. Results from Raman spectroscopy have also confirmed the formation of α-cristobalite phase of SiO₂. The abrupt increase in the integrated Raman intensity ratio between steam pressures 0.1 and 0.45 MPa suggests the onset of accelerated crystallization. Non-destructive three dimensional X-ray microscopy/tomography (XCT) and computational image processing techniques are employed by the University of South Carolina to probe the porous oxidation features on SiC samples at varying pressures. Interestingly, most pores are observed to be located away from the surface as well as the oxide-SiC interface. The average oxide layer thickness assessed from the XCT analysis is seen to be in excellent agreement with the values determined through scanning electron microscopy analysis for the highest pressures where the oxide layer is relatively more uniform. A phase-field model developed by the NC State University and Idaho National Laboratory for simulating oxidation of SiC by steam captures the paralinear kinetics of SiC oxidation with a high degree of fidelity. Results from quasi-one-dimensional and two dimensional simulations show that the pores with oxidizing species lead to a higher volatilization rate. These simulations indicate that the enhanced apparent volatilization rates at higher pressures observed in experiments can be rationalized by the increased volatilization from the pores. The project team has also successfully developed the capability to import images from experiments for realistic evolution of the oxidizing microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laser formation of luminescence bubble microstructures in polymer films

The results of laser-induced formation of luminescent structures on the surface of poly-2.2’-n-oxydiphenylene-5.5’-bis-benzimidazole films, obtained by the coating method from a formic acid solution, are presented. The structures are formed using cw 405-nm laser radiation with intensities of 10{sup 2} – 10{sup 4} W cm{sup –2}. It is shown (using methods of optical, atomic-force, and electron microscopy) that the structures formed on the surface are microbubble foam-like aggregations. Their formation is modelled as a sequence of the following processes: release of formic acid molecules, their condensation on matrix defects in the surface layer, and explosive boiling as a result of heating this layer of polymer film by the laser beam. The luminescence of these structures is due to the weakening of the concentration quenching from closely spaced luminescence centres in benzimidazole cycles during their emergence to the surface and the increase in the distance between them due to the extension on bubble aggregates on the surface. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma damage mechanisms in low k organosilicate glass and their inhibition by Ar ion bombardment

In-situ x-ray photoelectron spectroscopy and ex-situ Fourier transform infrared spectroscopy studies of vacuum ultraviolet (VUV) photons with or without O{sub 2}, and O radicals point to distinct mechanisms of carbon abstraction in nanoporous organosilicate glass (OSG) films. VUV alone in the absence of O{sub 2} results in Si-CH{sub 3} bond scission and recombination preferentially at silicon monomethyl sites, obeying diffusion kinetics. In contrast, the presence of O{sub 2} interferes with recombination, resulting in diffusion-dominated carbon loss kinetics, enhanced Si oxidation, and greatly accelerating the rate of carbon loss in both the near surface and bulk regions of the OSG, at both monomethyl and dimethyl sites. Carbon abstraction due to exposure to (O({sup 3}P)) does not follow diffusion kinetics, and such interactions yield a SiO{sub 2}-like surface layer inhibiting further O diffusion. Results indicate that diffusion-dominated carbon abstraction kinetics previously observed for OSG exposure to O{sub 2} plasma damage is primarily attributable to the diffusion of O{sub 2} down OSG nanopores, reacting at photoactivated sites, rather than the diffusion of O radicals. OSG pretreatment by 900 eV Ar{sup +} bombardment effectively inhibits both VUV + O{sub 2} and O damage mechanisms by formation of ∼1 nm thick SiO{sub 2}-like surface region that inhibits both O and O{sub 2} diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Corrosion resistance, chemistry, and mechanical aspects of Nitinol surfaces formed in hydrogen peroxide solutions

Ti oxides formed naturally on Nitinol surfaces are only a few nanometers thick. To increase their thickness, heat treatments are explored. The resulting surfaces exhibit poor resistance to pitting corrosion. As an alternative approach to accelerate surface oxidation and grow thicker oxides, the exposure of Nitinol to strong oxidizing H2O2 aqueous solutions (3 and 30%) for various periods of time was used. Using X-Ray Photoelectron Spectroscopy (XPS) and Auger spectroscopy, it was found that the surface layers with variable Ti (6–15 at %) and Ni (5–13 at %) contents and the thickness up to 100 nm without Ni-enriched interfaces could be formed. The response of the surface oxides to stress in superelastic regime of deformations depended on oxide thickness. In the corrosion studies performed in both strained and strain-free states using potentiodynamic and potentiostatic polarizations, the surfaces treated in H2O2 showed no pitting in corrosive solution that was assigned to higher chemical homogeneity of the surfaces free of secondary phases and inclusions that assist better biocompatibility of Nitinol medical devices. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 100B: 1490–1499, 2012

36 MATERIALS SCIENCE↗

Comparative Studies of Constitutive Properties of nanocrystalline and Bulk Iron During Compressive Deformation

We present a comparative study of the mechanical properties of body-centered cubic nanocrystalline iron (nano-Fe) and microcrystalline iron (micro-Fe) by in situ high-pressure synchrotron X-ray diffraction under triaxial compression. For nano-Fe with a starting high dislocation density of 10{sup 16} m{sup -2}, the peak broadening is almost reversible upon unloading from 8.6 GPa to atmospheric pressure, indicating that no additional dislocations are built up during compressive deformation inside grains, at grain boundaries or twin boundaries. Furthermore, an orientation-dependent surface strain is found to be stored in the surface layer of the bcc nano-Fe, which is in agreement with the core-shell model of the nanocrystals. For micro-Fe, a significant and continuous peak sharpening and the associated work softening were observed after the sample is yielded at pressures above 2.0 GPa, which can be presumably attributed to a pressureinduced dislocation annihilation. This finding/interpretation supports the hypothesis that the annihilation of dislocations is one of the dominant mechanisms underlying the plastic energy dissipation. The determined yield strength of 2.0 GPa for nano-Fe is more than 15 times higher than that for micro-Fe (0.13 GPa), indicating that the nanoscale grain-size reduction is a substantially more effective strengthening mechanism than conventional carbon infusion in iron.

36 MATERIALS SCIENCE↗

Tritium species diffusion on and desorption from γ-LiAlO 2 (100) surface: A first-principles investigation

γ-LiAlO 2 enriched in the 6 Li isotope is a good candidate for tritium (T, 3 H) production in nuclear reactor. In this work, to better understand its 3 H production performance, first-principles calculations are performed to study the 3 H-related species diffusion on and desorption from the γ-LiAlO 2 (100) surface. For the diffusion process, we investigate the pathways and energy barriers for the T and OT diffusion on the pristine and defective γ-LiAlO 2 (100) surfaces. Our results reveal that the O and Li/Al atoms of the surface layer play important roles for T and OT diffusion, respectively. By comparing with its diffusion barrier in bulk γ-LiAlO 2 , the order of energy barrier for T diffusion is: bulk < surface < defective surface, which is reversed for OT diffusion. Space is the prime factor for OT diffusion, while diffusion-mediating atom instead of space becomes the key factor for T diffusion. For the desorption process, we investigate the 3 H-related species (T, OT, T 2 , and T 2 O) desorption from the γ-LiAlO 2 (100) surface. The desorption energies we obtained are so high that the desorption behavior of all the 3 H-related species is nearly prohibited. We expect the possible T 2 or T 2 O release from the large accumulation of 3 H atoms on the surface.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced X-ray Scattering and Spectroscopy Characterization of an Antisoiling Coating for Solar Module Glass

When dust and other particulates accumulate on the surface of solar modules, the power output of these soiled modules is significantly reduced. To combat this issue, antisoiling coatings can be placed on the top glass surface of solar modules. While there exists some understanding of how antisoiling coatings reduce soiling and reflection losses, approaches to characterize the durability and stability of the chemistry and morphology of antisoiling PV glass module coatings and how they evolve in response to soiling interactions are currently underdeveloped. Here we present the use of small-angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS) as a methodology for studying the morphology and chemistry of pristine and soiled antisoiling coatings. Here, this work demonstrates the effectiveness of SAXS in observing coating morphology despite the presence of soil surface layers—a capability which sets it apart as a strong characterization tool for antisoiling coatings on PV glass. XPS and XAS are used as complementary techniques to characterize the evolution of coating surface chemistry before and after soiling. XAS is shown to detect subtle chemical changes in the coating surface that cannot be detected by XPS.

14 SOLAR ENERGY↗

Atomistic simulation of laser-pulse surface modification: Predictions of models with various length and time scales

In this work, the femtosecond laser pulse modification of surface is studied for aluminium (Al) and gold (Au) by use of two-temperature atomistic simulation. The results are obtained for various atomistic models with different scales: from pseudo-one-dimensional to full-scale three-dimensional simulation. The surface modification after laser irradiation can be caused by ablation and melting. For low energy laser pulses, the nanoscale ripples may be induced on a surface by melting without laser ablation. In this case, nanoscale changes of the surface are due to a splash of molten metal under temperature gradient. Laser ablation occurs at a higher pulse energy when a crater is formed on the surface. There are essential differences between Al ablation and Au ablation. In the first step of shock-wave induced ablation, swelling and void formation occur for both metals. However, the simulation of ablation in gold shows an additional athermal type of ablation that is associated with electron pressure relaxation. This type of ablation takes place at the surface layer, at a depth of several nanometers, and does not induce swelling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of ion energy and ion species on ion channeling in LiNbO{sub 3}

Ion irradiation of LiNbO{sub 3} causes the formation of defects due to nuclear as well as electronic energy deposition {epsilon}{sub n} and {epsilon}{sub e}, respectively. However, the defect formation is influenced by the orientation of the crystal. If the irradiation is performed along a low index crystallographic direction (on-axis) the defect distributions are strongly affected by ion channeling because the ions are prevented from close collisions with the target atoms so that the penetration range of the impinging ions is increased. In order to investigate the effect of {epsilon}{sub n} and {epsilon}{sub e} on damage formation LiNbO{sub 3} crystals were irradiated on- and off-axes using Si{sup +} and Cu{sup +} ions with energies ranging from 550 keV to 2 MeV. We demonstrate for on-axis irradiation that at low ion energies where {epsilon}{sub n} dominates the formation of defects, the defect distribution is shifted to larger depths compared to off-axis irradiation. The investigation of the shift shows a square-root dependence on both ion energy and ion species. Furthermore, on-axis irradiation was done using high-ion energies where defects are formed in the near-surface region due to electronic energy loss. Compared to off-axis irradiation a thinner amorphous surface layer was formed as a result of the reduced electronic energy loss in the case of on-axis irradiation. For on-axis irradiation {epsilon}{sub e} could be estimated in two different ways considering the layer thickness and the penetration range of the incident ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗