Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Study of ice cluster impacts on amorphous silica using the ReaxFF reactive force field molecular dynamics simulation method

We study the dynamics of the collisions between amorphous silica structures and amorphous and crystal ice clusters with impact velocities of 1 km/s, 4 km/s, and 7 km/s using the ReaxFF reactive molecular dynamics simulation method. The initial ice clusters consist of 150 water molecules for the amorphous ice cluster and 128 water molecules for the crystal ice cluster. The ice clusters are collided on the surface of amorphous fully oxidized and suboxide silica. These simulations show that at 1 km/s impact velocities, all the ice clusters accumulate on the surface and at 4 km/s and 7 km/s impact velocities, some of the ice cluster molecules bounce back from the surface. At 4 km/s and 7 km/s impact velocities, few of the water molecules dissociations are observed. The effect of the second ice cluster impacts on the surfaces which are fully covered with ice, on the mass loss/accumulation is studied. These studies show that at 1 km/s impacts, the entire ice cluster accumulates on the surface at both first and second ice impacts. At higher impact velocities, some ice molecules which after the first ice impacts have been attached to the surface will separate from the surface after the second ice impacts at 7 km/s impact velocity. For the 4 km/s ice cluster impact, ice accumulation is observed for the crystal ice cluster impacts and ice separation is observed for the amorphous ice impacts. Observing the temperatures of the ice clusters during the collisions indicates that the possibility of electron excitement at impact velocities less than 10 km/s is minimal and ReaxFF reactive molecular dynamics simulation can predict the chemistry of these hypervelocity impacts. However, at impact velocities close to 10 km/s the average temperature of the impacting ice clusters increase to about 2000 K, with individual molecules occasionally reaching temperatures of over 8000 K and thus it will be prudent to consider the concept of electron excitation at these higher impact velocities, which goes beyond the current ReaxFF ability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Early stage oxynitridation process of Si(001) surface by NO gas: Reactive molecular dynamics simulation study

Initial stage of oxynitridation process of Si substrate is of crucial importance in fabricating the ultrathin gate dielectric layer of high quality in advanced MOSFET devices. The oxynitridation reaction on a relaxed Si(001) surface is investigated via reactive molecular dynamics (MD) simulation. A total of 1120 events of a single nitric oxide (NO) molecule reaction at temperatures ranging from 300 to 1000 K are statistically analyzed. The observed reaction kinetics are consistent with the previous experimental or calculation results, which show the viability of the reactive MD technique to study the NO dissociation reaction on Si. We suggest the reaction pathway for NO dissociation that is characterized by the inter-dimer bridge of a NO molecule as the intermediate state prior to NO dissociation. Although the energy of the inter-dimer bridge is higher than that of the intra-dimer one, our suggestion is supported by the ab initio nudged elastic band calculations showing that the energy barrier for the inter-dimer bridge formation is much lower. The growth mechanism of an ultrathin Si oxynitride layer is also investigated via consecutive NO reactions simulation. The simulation reveals the mechanism of self-limiting reaction at low temperature and the time evolution of the depth profile of N and O atoms depending on the process temperature, which would guide to optimize the oxynitridation process condition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A fiber optic, ultraviolet light-emitting diode-based, two wavelength fluorometer for monitoring reactive adsorption

Construction and use of an ultraviolet light-emitting diode-based fluorometer for measuring photoluminescence (PL) from powder samples with a fiber optic probe is described. Fluorescence at two wavelengths is detected by miniature photomultiplier tubes, each equipped with a different band pass filter, whose outputs are analyzed by a microprocessor. Photoluminescent metal oxides and hydroxides, and other semiconducting nanoparticles, often undergo changes in their emission spectra upon exposure to reactive gases, and the ratio of the PL intensities at two wavelengths is diagnostic of adsorption. Use of this instrument for reactive gas sensing and gas filtration applications is illustrated by measuring changes in the PL ratio for zirconium hydroxide and zinc oxide particles upon exposure to air containing low concentrations of sulfur dioxide.

36 MATERIALS SCIENCE↗

Effects of irradiation distance on supply of reactive oxygen species to the bottom of a Petri dish filled with liquid by an atmospheric O{sub 2}/He plasma jet

The impact of irradiation distances on plasma jet-induced specific effects on the supply of reactive oxygen species (ROS) to the bottom of a Petri dish filled with liquid was investigated using a KI-starch gel reagent that can be employed as a ROS indicator even in water. O{sub 3} exposure experiments without plasma irradiation were also performed to elucidate the specific effects of the plasma jet. Relative concentrations of ROS transported to the bottom were evaluated using absorbance measurements. The results indicated that ROS supply to the bottom is markedly enhanced by the plasma jet irradiation at shorter irradiation distances, whereas similar results could not be obtained for the O{sub 3} exposure. In these cases, the liquid mixing in the depth direction was also enhanced by the plasma jet irradiation only, and the supply of reactive atomic oxygen to the liquid surface was markedly increased as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transport equations for partially ionized reactive plasma in magnetic field

Transport equations for partially ionized reactive plasma in magnetic field taking into account the internal degrees of freedom and electronic excitation of plasma particles are derived. As a starting point of analysis the kinetic equation with a binary collision operator written in the Wang-Chang and Uhlenbeck form and with a reactive collision integral allowing for arbitrary chemical reactions is used. The linearized variant of Grad’s moment method is applied to deduce the systems of moment equations for plasma and also full and reduced transport equations for plasma species nonequilibrium parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of reducible oxide–metal cluster charge transfer on the structure and reactivity of adsorbed Au and Pt atoms and clusters on anatase TiO 2

We carried out density functional theory calculations to study the influence of oxide–metal charge transfers on the structure, energetics, and reactivity of Au and Pt atoms, dimers, and trimers adsorbed on the (101) surface of reduced anatase TiO 2 . Pt clusters interact much more strongly with the TiO 2 support than Au clusters, and, with the exception of single Pt adatoms, generally behave as electron acceptors on reduced TiO 2 , whereas Au clusters can both accept and donate charge on the reduced surface. The reactivity of the supported clusters was probed by considering their interaction with CO and co-adsorbed O 2 . The effect of surface reduction on the interaction with CO is particularly significant when the CO adsorption site is an interfacial metal atom directly in contact with the TiO 2 surface and/or in the presence of co-adsorbed O 2 . Pt clusters interact strongly with co-adsorbed O 2 and form Pt–O 2 complexes that can easily accept electrons from reduced surfaces. In contrast, Au clusters donate charge to co-adsorbed O 2 even in the presence of excess electrons from a reduced support. In conclusion, the computed differences in the properties of the supported Pt and Au clusters are consistent with several experimental observations and highlight the important role of excess surface electrons in the behavior of supported metal catalysts on reducible oxides

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimized utilization of COMB3 reactive potentials in LAMMPS

An investigation to optimize the application of the third-generation charge optimized many-body (COMB3) interatomic potential and associated input parameters was carried out through the study of solid–liquid interactions in classical molecular dynamics simulations. The rates of these molecular interactions are understood through the wetting rates of water nano-droplets on a bare copper (111) surface. Implementing the Langevin thermostat, the influence of simulation time step, the number of atoms in the system, the frequency at which charge equilibration is performed, and the temperature relaxation rate are all examined. The results indicate that time steps of 0.4 fs are possible when using longer relaxation times for the system temperature, which is almost double the typical time step used for reactive potentials. Additionally, the use of the charge equilibration allows for a fewer atomic layers to be used in the Cu slab. In addition, charge equilibrium schemes do not need to be performed every time step to ensure accurate charge transfer. Interestingly, the rate of wetting for the nanodroplets is dominantly dependent on the temperature relaxation time, which is predicted to significantly change the viscosity of the water droplets. This work provides a pathway for optimizing simulations using the COMB3 reactive interatomic potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure and temperature neural network reactive force field for energetic materials

Reactive force fields for molecular dynamics have enabled a wide range of studies in numerous material classes. These force fields are computationally inexpensive compared with electronic structure calculations and allow for simulations of millions of atoms. However, the accuracy of traditional force fields is limited by their functional forms, preventing continual refinement and improvement. Therefore, we develop a neural network-based reactive interatomic potential for the prediction of the mechanical, thermal, and chemical responses of energetic materials at extreme conditions. The training set is expanded in an automatic iterative approach and consists of various CHNO materials and their reactions under ambient and shock-loading conditions. Further, this new potential shows improved accuracy over the current state-of-the-art force fields for a wide range of properties such as detonation performance, decomposition product formation, and vibrational spectra under ambient and shock-loading conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of substrate and growth method on vanadium dioxide thin films by RF magnetron sputtering: Vanadium metal oxidation vs reactive sputtering

Vanadium dioxide (VO 2 ) undergoes a metal–insulator phase transition at ~70 °C and has attracted substantial interest for potential applications in electronics, including those in neuromorphic computing. The vanadium–oxygen system has a rather complicated phase diagram, and controlling the stoichiometry and the phase of thin films of vanadium oxides is a well-known challenge. Here, we explore the novel combination of two methods of VO 2 thin film deposition using off-axis RF magnetron sputtering on (100)- and (111)-oriented yttria-stabilized zirconia (YSZ) substrates: reactive sputtering of vanadium in an oxygen environment and sputtering of vanadium metal followed by oxidation to VO 2 . Interestingly, the reactive sputtering process on both substrate orientations yields the metastable semiconducting VO 2 (B) phase, which is structurally stabilized by the YSZ surface. The metal sputtering and oxidation process on YSZ produces mainly the equilibrium monoclinic (or M1) phase of VO 2 that exhibits a metal–insulator transition. Using this method, we obtained thin films of (010)-textured polycrystalline VO 2 (M1) that show a metal–insulator transition with an on/off ratio larger than 1000.

36 MATERIALS SCIENCE↗

Advancing the mechanical integrity and fragmentation behavior of reactive projectiles

A multivariant statistical approach was used to identify treatment conditions that improve the survivability of structural reactive material (SRM) projectiles upon launch and enhance energy release upon impact. The study included both mechanical testing of projectiles as well as their reactive characterization. The projectiles were launched in a high-velocity impact-ignition testing system and impacted an anvil for vented chamber calorimetry. This study examined a link between ultimate compressive stress and combustion performance. Two treatments were applied to consolidated aluminum projectiles including annealing and addition of silica (SiO 2 ) inclusions. Results showed annealing at moderate temperatures resulted in intact SRM projectiles upon launch. Adding small concentrations (1–2 wt. %) of SiO 2 to the SRM promoted fragmentation and combustion performance upon impact. Compared to the untreated projectiles, annealing with SiO 2 inclusion processing treatments improved the energy conversion efficiency from 37–84% (for untreated projectiles) up to 54–98%. In conclusion, increasing interparticle dislocation recovery by annealing while balancing inclusions promoting fragmentation upon impact was the key to optimizing combustion performance for SRM ballistic impact applications.

42 ENGINEERING↗

Temperature-based reactive flow model for triaminotrinitrobenzene (TATB) plastic bonded explosives

A new reactive flow model is presented for triaminotrinitrobenzene (TATB)-based plastic bonded explosives, applicable to shock initiation and steady detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and reaction products. The model incorporates temperature-dependent decomposition reaction rates. Particularly, Arrhenius model parameters were derived from quantum-based molecular dynamics simulations of TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the slow release of energy inherent to detonation in TATB-based materials. Model parameters were calibrated against gas gun shock initiation experiments and steady detonation rate stick tests. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments. The model is found to perform equally well in predicting the size-effect curve of ambient, cold, and hot rate sticks. The present work demonstrates the viability of incorporating results from subscale simulations into a continuum-scale reactive flow model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AWSD reactive flow model for PBX 9404

An Arrhenius–Wescott–Stewart–Davis (AWSD) reactive flow model for high explosive PBX 9404 is developed. We specifically calibrate an AWSD model for PBX 9404 by fitting equations of state for reactants and detonation products to the results of thermochemical calculations and to experimental data from multiple sources. The calibrated equations of state are then coupled with an Arrhenius rate law based on shock temperature that describes the reaction progress during PBX 9404 detonation. The parameter values in the rate law are calibrated to experimental gas-gun data and diameter effect results. The results of the calibrated AWSD model are in strong agreement with available experimental data for PBX 9404. A similar level of agreement between predicted and experimental results is observed when the calibrated model is validated on data that were not used in the model parameterization procedure. Our results illustrate that the AWSD model is capable of accurately describing the many important properties and observables in the reactive burn of PBX 9404. Because of the historical significance of PBX 9404 in high explosives research and its current use in aging studies, this work provides an important model of a legacy material, which can be used to make comparisons to new high explosive formulations.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Analytical models for the enhancement of fusion reactivity by turbulence

The reactivity of fusion plasma depends not only on its local density and temperature but also, through a recently identified kinetic effect, on the relative velocities of nearby fluid elements. Turbulence on fine spatial scales, therefore, enhances fusion reactivity. The enhancement is quantified here for general subsonic turbulent flows. Leveraging this effect in the design of inertial confinement fusion experiments could enable substantial energy savings.

Fluid dynamics↗

A point-particle-based hydride shell-shedding model for ejecta particle transport in reactive environments

A shock wave passing over a rough or perturbed metal surface will induce a limiting case of Richtmyer–Meshkov instability and will cause small particles to eject from the surface and transport into the surrounding medium. These particles are known as ejecta and can be either solid or liquid in nature. Recent experiments have shown that liquid cerium ejecta clouds exhibit unexpected non-monotonic acceleration behaviors as well as temperature plateaus after a brief temperature rise if they are transporting in a chemically reactive, hydrogen-based medium while they act as expected in an inert medium. This work details a point-particle model developed for reactive cerium ejecta transport, which attempts to account for these new physics through the behavior of a developing solid hydride shell, which is believed to form as a product of the reaction. The overall model incorporates the effects of the reaction on the particle properties as well as the effects of potential shedding of the shell into sub-micrometer scale flakes and potential phase change of the hydride if the ejecta particles reach the melt point of the hydride layer. The model is tested by performing simulations of the original motivating experiments and comparing quantities, such as ejected mass, velocimetry, and temperature profiles, against the experimental data. While the model is able to capture many general features of the observed anomalies, some inaccuracies still exist. These point to both missing physics in the model (such as a deuterium adsorption mechanism on the hydride layer) as well as a lack of knowledge of certain material properties (such as the strength of cerium hydride to determine dynamic fracture thicknesses) needed to fully reduce the uncertainties in the model by up to an order of magnitude and perform a true attempt at model validation.

97 MATHEMATICS AND COMPUTING↗

Design improvements for a recirculating reactor: Enhanced temperature measurement and sample-isolated reactivity in steady-state kinetic studies

Building upon a previous recirculating reactor design [S.A. Tenney, K. Xie, J.R. Monnier, A. Rodriguez, R.P. Galhenage, S. Audrey, D.A. Chen, Rev. Sci. Instrum. 84, 104101 (2013)], we present significant improvements that address key limitations in steady-state kinetic measurements for heterogeneous catalysis. The enhanced reactor design features direct sample heating with a focused IR lamp and temperature measurement in direct contact with the sample, enabling more accurate temperature control and improved kinetic analysis. A critical advancement is the isolation of sample reactivity from reactor wall contributions, ensuring that only the sample contributes to measured reaction rates. This was a limitation in earlier designs where the entire reactor contributed to the observed reactivity. The system incorporates a bypass flow cell for direct comparison with powder catalysts under identical conditions using a standard plug-flow reactor configuration. We demonstrate these capabilities through CO oxidation experiments on Pt(111) single crystals and graphene-passivated Pt(111), highlighting the system's ability to differentiate catalytic activity in model systems and directly compare them with high surface area powder catalysts. This reactor is particularly suited for thin films and low surface area catalysts that are not effectively evaluated in traditional flow reactors, especially for samples with low numbers of active sites or slow reaction rates.

36 MATERIALS SCIENCE↗

An atypical lipoteichoic acid from Clostridium perfringens elicits a broadly cross-reactive and protective immune response

Clostridium perfringens is a leading cause of food-poisoning and causes avian necrotic enteritis, posing a significant problem to both the poultry industry and human health. No effective vaccine against C. perfringens is currently available. Using an antiserum screen of mutants generated from a C. perfringens transposon-mutant library, here we identified an immunoreactive antigen that was lost in a putative glycosyltransferase mutant, suggesting that this antigen is likely a glycoconjugate. Following injection of formalin-fixed whole cells of C. perfringens HN13 (a laboratory strain) and JGS4143 (chicken isolate) intramuscularly into chickens, the HN13-derived antiserum was cross-reactive in immunoblots with all tested 32 field isolates, whereas only 5 of 32 isolates were recognized by JGS4143-derived antiserum. The immunoreactive antigens from both HN13 and JGS4143 were isolated, and structural analysis by MALDI-TOF-MS, GC-MS, and 2D NMR revealed that both were atypical lipoteichoic acids (LTAs) with poly-(β1→4)-ManNAc backbones substituted with phosphoethanolamine. However, although the ManNAc residues in JGS4143 LTA were phosphoethanolamine-modified, a few of these residues were instead modified with phosphoglycerol in the HN13 LTA. The JGS4143 LTA also had a terminal ribose and ManNAc instead of ManN in the core region, suggesting that these differences may contribute to the broadly cross-reactive response elicited by HN13. In a passive-protection chicken experiment, oral challenge with C. perfringens JGS4143 lead to 22% survival, whereas co-gavage with JGS4143 and α-HN13 antiserum resulted in 89% survival. This serum also induced bacterial killing in opsonophagocytosis assays, suggesting that HN13 LTA is an attractive target for future vaccine-development studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive molecular dynamics simulations of an excess proton in polyethylene glycol-water solutions

We investigate the effects of both triethylene glycol (TEG) and polyethylene glycol (PEG) on the structure and transport of an excess proton (H + ) in aqueous solution. A new reactive force field (ReaxFF) parameterisation is carried out to better describe proton transfer of H + with PEG polymers in aqueous solution via training against density functional theory (DFT) calculations. Using this ReaxFF parameterisation, reactive molecular dynamics simulations are carried out for three different systems containing H + : bulk water, aqueous TEG, and aqueous PEG with a single, oriented polymer chain. The H + diffusivity is suppressed due to the presence of TEG and enhanced in the oriented chain PEG system, particularly along the axis parallel to the PEG chain, relative to bulk water. The enhancement in proton mobility along the chain axis is mainly due to the structural, rather than vehicular, component. From free energy calculations for H + transfer, the increase in proton mobility is not due to a reduction in activation energy. Finally, from pair distribution function analysis of the local structure for water and hydronium we hypothesise the increased mobility is due to an entropic effect, specifically a favourable hydrogen bond network for long range proton transport due to the oriented PEG chain.

36 MATERIALS SCIENCE↗

Type Ia supernovae deflagration-to-detonation transition explosions powered by the Zel’dovich reactivity gradient mechanism

ABSTRACT Our aim in this work is to identify and explain the necessary conditions required for an energetic explosion of a Chandrasekhar-mass white dwarf. We construct and analyse weakly compressible turbulence models with nuclear burning effects for carbon/oxygen plasma at a density expected for the deflagration-to-detonation transition (DDT) to occur. We observe the formation of carbon deflagrations and transient carbon detonations at early times. As turbulence becomes increasingly inhomogeneous, sustained carbon detonations are initiated by the Zel’dovich reactivity gradient mechanism. The fuel is suitably preconditioned by the action of compressive turbulent modes with wavelength comparable to the size of resolved turbulent eddies; no acoustic wave is involved in this process. Oxygen detonations are initiated, aided either by reactivity gradients or by collisions of carbon detonations. The observed evolutionary time-scales are found to be sufficiently short for the above process to occur in the expanding, centrally ignited massive white dwarf. The inhomogeneous conditions produced prior to the DDT might be of consequence for the chemical composition of the outer ejecta regions of Type Ia supernovae from the single degenerate channel, and offer the potential for validation of the proposed model.

Brooker, E.↗