Search NASA⌕ Search

SEARCH · Search NASA

Results for “capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Oxygen‐Assisted Supercapacitive Swing Adsorption of Carbon Dioxide

We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O 2 in the CO 2 /N 2 gas mixture results in an up to 11 times higher CO 2 adsorption capacity with 3 M MgBr 2 (at 0.6 V) and up to 4–5 times higher adsorption capacity with 3 M MgCl 2 (at 1 V). A tradeoff between high CO 2 adsorption capacities and lower coulombic efficiencies was observed at voltages above 0.6 V. The energetic and adsorptive performance of the electrodes in the presence of oxygen below 0.5 V was similar to the performance with a CO 2 /N 2 mixture without oxygen at 1 V. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the electrodes demonstrate that the specific capacitance increases while the diffusion resistance decreases in the presence of oxygen. Oxygen concentrations ranging between 5–20 % give similar energetic and adsorptive performance. The electrodes exhibit stable performance for up to 100 cycles of operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Quinoidal Two‐Dimensional Metal–Organic Framework for High‐Performance Micro‐Supercapacitors and Solid‐State Lithium Batteries

Two-dimensional (2D) metal-organic frameworks (MOFs) integrating redox-active linkers enable dense charge sites and open ion pathways for microscale energy storage. We report a quinoidal dicarboxylate ligand, AQM-H2L, derived from p-azaquinodimethane, forming crystalline frameworks with Cu2+ and Zn2+ nodes. The Cu-based MOF (AQM-AQM-H2L-Cu) exhibits layered sheets (>14 Å spacing) constructed from dinuclear Cu-carboxylate units and conjugated AQM linkers, which narrow the bandgap and introduce Cu2+/Cu+ pseudocapacitance. Exfoliated nanosheets (∼5 nm) retain crystallinity and excellent processability. Integrated into graphene films, they deliver areal and volumetric capacitances of 29.6 mF cm-2 and 18.1 F cm-3, achieving 2.6 mWh cm-3 energy density at 160 mW cm-3. As ionic fillers (1 wt%) in PEO solid polymer electrolytes, the nanosheets markedly enhance LiFePO4 cell performance, affording 169.8 mAh g-1 at 0.2 C and 93% retention after 400 cycles. This work establishes quinoidal linkers as a compact and robust design motif for ionically active 2D frameworks toward high-performance miniature and solid-state energy devices.

Chen, Ziman↗
DOE OSTI2017

Nanographene Aerogels: Size Effect of the Precursor Graphene Oxide on Gelation Process and Electrochemical Properties

Improving the electrochemical properties of graphene aerogels (GAs) without doping or making composites is an attractive synthetic strategy. Here in this work we report on the effects of graphene sheet dimensions on the properties of GAs. Nanographene aerogels (nG-AGs) were synthesized using nanographene oxide (nGO) powder with a mean platelet diameter of 90 nm. In-situ Fourier transform infrared spectroscopy (FTIR) during gelation revealed a longer fast-gelation regime for nG-AGs than for stdG-AGs. The surface-area-normalized capacitance of nG-AGs calculated from cyclic voltammetry is 16% higher than that of stdG-AGs, and the onset of hydrogen evolution is observed at a lower over-potential. These observations can be attributed to increased density of edge sites and defects in nanographene sheets. Our results imply that the diameter of the precursor graphene sheets can be used as a parameter to optimize the electrochemical properties of graphene AGs depending on the application.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A Solvent-Free Synthesis of Lignin-Derived Renewable Carbon with Tunable Porosity for Supercapacitor Electrodes

Synthesis of multiphase materials from lignin, a biorefinery coproduct, offers limited success owing to the inherent difficulty in controlling dispersion of these renewable hyperbranched macromolecules in the product or its intermediates. Effective use of the chemically reactive functionalities in lignin, however, enables tuning morphologies of the materials. Here in this study, we bind lignin oligomers with a rubbery macromolecule followed by thermal crosslinking to form a carbon precursor with phase contrasted morphology at submicron scale. The solvent-free mixing is conducted in a high-shear melt mixer. With this, the carbon precursor is further modified with potassium hydroxide for a single-step carbonization to yield activated carbon with tunable pore structure. A typical precursor with 90 % lignin yields porous carbon with 2120 m 2 g -1 surface area and supercapacitor with 215 F g -1 capacitance. Lastly, the results show a simple route towards manufacturing carbon-based energy-storage materials, eliminating the need for conventional template synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Detailed modeling of the video signal and optimal readout of charge-coupled devices

This paper provides a practical design methodology to calculate an optimal filter for noise reduction in the readout of charge-coupled devices (CCDs) taking into account the charge transfer and feedthroughs due to capacitive coupling in the CCD. A detailed analysis of the dynamics of the video signal and charge transfer is presented, including the circuital modeling of the output stage of the CCD and the dynamics of the electronics in the video chain before the analog-to-digital (AD) converter. This model is used to compute an optimal filter that minimizes the variance of the pixel noise and uses the samples of the charge transfer, before the charge is fully settled. This is necessary to enhance the performance of previous results that also use optimal filters but do not use the transition samples, while also reducing the pixel readout time, resulting in faster readouts. As a proof of concept for the optimal filter, we present in this paper novel experimental results using a Skipper CCD, which has a floating sense node that allows to measure the charge packet an arbitrary number of times. However, this technique can be applied to any CCD that has a readout system that digitally samples the video signal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Modelling tree stem-water dynamics over an Amazonian rainforest

A novel tree stem-water model was developed to capture the dynamics of stem-water storage and its contribution to daily transpiration. The module was incorporated into the Community Land Model (CLM), where it was used to test model sensitivity to stem-water content for an evergreen rainforest site in Amazonia, that is, the BR-Sa3 eddy covariance site. With the inclusion of the stem-water storage, CLM produced greater dry-season latent heat flux that was closer to observations, facilitated by easier canopy access to a nearby stem-water source, rather than solely dependent on soil water. The simulated stem-water content also showed seasonal variations in magnitude, along with the seasonal variations in sap flow rate. Stored stem-water of a single mature tree was estimated to contribute 20–80 kg/day of water to transpiration during the wet season and 90–110 kg/day during the dry season, thereby partially replacing soil water and maintaining plant transpiration during the dry season. Diurnally, stem-water content declined as water was extracted for transpiration in the morning and then was refilled from soil water beginning in the afternoon and through the night. The dynamic discharge and recharge of stem storage was also shown to be regulated by multiple environmental drivers. Furthermore, our study indicates that the inclusion of stem capacitance in CLM significantly improves model simulations of dry-season water and heat fluxes, in terms of both magnitude and timing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Freestanding RGO—Co 3 O 4 —PPy Composite Films as Electrodes for Supercapacitors

Supercapacitors are of great importance for energy storage and have been the subject of intensive research in recent years, in which conductive polymers are used to make flexible and freestanding electrodes. However, their insufficient access to the electrolytes and the low chemical stability of these conductive polymers lead to their poor performance. To solve these issues, a facile method that can be used to synthesize freestanding composite film electrodes of reduced graphene oxide–cobalt oxide–polypyrrole (RGO—Co 3 O 4 —PPy) as supercapacitors is demonstrated. They exhibit a high specific capacitance of 532.8 F g -1 and nearly no degradation after 700 cycles of charging and discharging. The synergistic effect of Co 3 O 4 , RGO, and PPy is responsible for the superior property. The three-phase composite electrode utilizes the RGO nanosheet as a substrate to provide a large surface area for loading Co 3 O 4 nanoparticles and also to enhance the electron transfer. Further, the deposition of PPy largely reduces the resistivity of RGO—Co 3 O 4 —PPy, and the introduction of Co 3 O 4 nanoparticles significantly improves cycle stability.

25 ENERGY STORAGE↗
DOE OSTI2020

A Chip-Scale Oscillation-Mode Optomechanical Inertial Sensor Near the Thermodynamical Limits

Modern navigation systems integrate the global positioning system (GPS) with an inertial navigation system (INS), which complement each other for correct attitude and velocity determination. Here, the core of the INS integrates accelerometers and gyroscopes used to measure forces and angular rate in the vehicular inertial reference frame. With the help of gyroscopes and by integrating the acceleration to compute velocity and distance, precision and compact accelerometers with sufficient accuracy can provide small–error location determination. Solid–state implementations, through coherent readout, can provide a platform for high performance acceleration detection. In contrast to prior accelerometers using piezoelectric or capacitive readout techniques, optical readout provides narrow–linewidth high–sensitivity laser detection along with low–noise resonant optomechanical transduction near the thermodynamical limits. Here an optomechanical inertial sensor with an 8.2 µg Hz –1/2 velocity random walk (VRW) at an acquisition rate of 100 Hz and 50.9 µg bias instability is demonstrated, suitable for applications, such as, inertial navigation, inclination sensing, platform stabilization, and/or wearable device motion detection. Driven into optomechanical sustained–oscillation, the slot photonic crystal cavity provides radio–frequency readout of the optically–driven transduction with an enhanced 625 µg Hz –1 sensitivity. Measuring the optomechanically–stiffened oscillation shift, instead of the optical transmission shift, provides a 220× VRW enhancement over pre–oscillation mode detection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co–Assembly and Non–Solvent Induced Phase Separation

Materials combining an asymmetric pore structure with mesopores everywhere enable high surface area accessibility and fast transport, making them attractive for e.g., energy conversion and storage applications. Block copolymer (BCP)/inorganic precursor co-assembly combined with non-solvent induced phase separation (NIPS) provides a route to materials in which a mesoporous top surface layer merges into an asymmetric support with graded porosity along the film normal and mesopores throughout. Here, the co-assembly and non-solvent-induced phase separation (CNIPS) of poly(isoprene)-b-poly(styrene)-b-poly(4-vinylpyridine) (ISV) triblock terpolymer and titanium dioxide (TiO 2 ) sol-gel nanoparticlesare reported. Heat-treatment in air results in free-standing asymmetric porous TiO 2 . Further thermal processing in ammonia results in free-standing asymmetric porous titanium nitride (TiN). processing changes alter structural membrane characteristics is demonstrated. Changing the CNIPS evaporation time results in various membrane cross-sections ( finger-like to sponge-like). Further, oxide and nitride material composition, crystallinity, and porosity are tuned by varying thermal processing conditions. Finally, thermal processing condition effects are probed on phase-pure asymmetric nitride membrane behavior using cyclic voltammetry to elucidate their influence, e.g., on specific capacitance. Results provide further insights into improving asymmetric and porous materials for applications including energy conversion and storage, separation, and catalysis and motivate a further expansion of CNIPS to other (in)organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Defoliation‐induced compensatory transpiration is compromised in SUT4 ‐RNAi Populus

Abstract The tonoplast sucrose transporter PtaSUT4 is well expressed in leaves of Populus tremula × Populus alba (INRA 717‐IB4), and its inhibition by RNA‐interference (RNAi) alters leaf sucrose homeostasis. Whether sucrose partitioning between the vacuole and the cytosol is modulated by PtaSUT4 for specific physiological outcomes in Populus remains unexplored. In this study, partial defoliation was used to elicit compensatory increases in photosynthesis and transpiration by the remaining leaves in greenhouse‐grown poplar. Water uptake, leaf gas exchange properties, growth and nonstructural carbohydrate abundance in source and sink organs were then compared between wild‐type and SUT4 ‐RNAi lines. Partial defoliation increased maximum photosynthesis rates similarly in all lines. There was no indication that source leaf sugar levels changed differently between wild‐type and RNAi plants following partial defoliation. Sink levels of hexose (glucose and fructose) and starch decreased similarly in all lines. Interestingly, plant water uptake after partial defoliation was not as well sustained in RNAi as in wild‐type plants. While the compensatory increase in photosynthesis was similar between genotypes, leaf transpiration increased less robustly in RNAi than wild‐type plants. SUT4‐RNAi and wild‐type source leaves differed constitutively in their bulk modulus of elasticity, a measure of leaf turgor, and storage water capacitance. The data demonstrate that reduced sucrose partitioning due to PtaSUT4 ‐RNAi altered turgor control and compensatory transpiration capacity more strikingly than photosynthesis and sugar export. The results are consistent with the interpretation that SUT4 may control vacuolar turgor independently of sink carbon provisioning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Impact of Salinity on Ground Ice Distribution Across an Arctic Coastal Polygonal Tundra Environment

The heterogeneous distribution of ground ice in the Arctic is a key driver of uneven ground subsidence as permafrost thaws, significantly impacting infrastructure and surface/subsurface hydrology. These topographic and hydrological changes contribute to major uncertainties in energy and carbon fluxes and storage in a warming Arctic. This study aims to improve our understanding of the controls on ground ice and organic matter distribution within the top 3 m of permafrost in coastal polygonal tundra near Utqiagvik, Alaska. To this end, we apply a neural network approach to bulk density distributions derived from nondestructive X-ray tomography of soil cores, trained with laboratory analyses, to improve the resolution and spatial coverage of estimates of dry bulk density, ice content, and organic matter content. In addition, we use capacitively coupled geophysical imaging to map soil electrical conductivity and salinity variations. The results show that sedimentary deposits from ocean transgressions, along with subsequent ice wedge polygon geomorphological processes, jointly influence the distribution of ice content at various scales. The impact of the latter decreases with depth, whereas the influence of salinity and sedimentary history increases. Although the controls on the distribution of soil organic matter content (g/cm 3 ) remain unclear, the pronounced heterogeneity in bulk density strongly influences its calculation from laboratory mass fraction measurements (g/g). From a methodological perspective, the interdependencies among soil components and the need for increased data coverage underscore the value of high-resolution density measurements, such as using X-ray tomography. Overall, this study emphasizes the importance of considering salinity constraints on ice content distribution in coastal permafrost regions. The results are expected to aid in the development of data products and process representations in geomorphological and ecosystem models.

Dafflon, Baptiste [Lawrence Berkeley National Labo↗
DOE OSTI2026

Exploding Bridgewire (EBW) Detonators: An Example of Synergistic Multiphysics

Exploding bridgewire (EBW) detonators are highly temporally reproducible explosive devices that require the rapid discharge of a high‐voltage capacitance to operate and so are immune to most of the accidental hazards associated with traditional electric detonators. They have been demonstrated to be safe enough for use in high‐consequence explosive applications. Despite continued use for over 82 years, understanding the exact mechanism of operation has remained elusive. Various researchers have ascribed either deflagration‐to‐detonation (DDT) or shock‐to‐detonation (SDT) phenomena observed in other explosive events to explain the science behind the successful engineering; however, a rigorous justification has been absent. Previously, we have demonstrated a complex interaction in EBW detonators between large electrical currents, non‐equilibrium thermodynamic material states, plasma physics, powder compaction phenomena, shock physics, photochemistry, and rapid conventional explosive chemical reaction processes. Specifically, we have made progress in understanding the complex multiphysics that operates in these detonators and demonstrating that it is a serendipitous synergy between UV light emitted from the arc formed as the bridge is electrically exploded and the accompanying short‐duration shock transmitted into the explosive powder bed that allows these devices to function at practical capacitor sizes and charge voltages. This insight not only places the topic on a firmer scientific footing but potentially enables new approaches to safe detonator design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Investigation of Interlayer Dielectric in BaTiO 3 /III–Nitride Transistors

In this paper, the impact of varying the thickness of the Al 2 O 3 interlayer dielectric on the electrical characteristics of BaTiO 3 /III-nitride transistors is investigated. In the findings, it is revealed that a minimum thickness of 8 nm for the Al 2 O 3 layer is crucial to maintain high device performance and protect against sputtering-induced damage during BaTiO 3 deposition. The fabricated BaTiO 3 /Al 2 O 3 /AlGaN/GaN high electron mobility transistors exhibit exceptional electrical properties, including a maximum current density of 700 mA mm –1 , an on-resistance of 5 Ω mm, an I ON /I OFF ratio of 10 7 , a subthreshold slope of 119 mV dec –1 , and significantly reduced gate leakage current. The devices with the optimal 8 nm Al 2 O 3 thickness demonstrates excellent agreement between theoretical and experimental values for effective mobility, achieving a value of 1188 cm 2 V –1 ·s at a 2D electron gas density of 10 13 cm –2 . Furthermore, in the study, it is confirmed that increasing the Al 2 O 3 thickness also improves the quality of interface charge density, as evidenced by the results obtained from capacitance–voltage measurements. In these findings, the critical role of controlling the Al 2 O 3 thickness in optimizing the electrical characteristics and overall performance of BaTiO 3 /III-nitride transistors are highlighted.

42 ENGINEERING↗
DOE OSTI2023

Anomalous Loss Reduction Below Two‐Level System Saturation in Aluminum Superconducting Resonators

Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the dissipation due to two-level systems (TLS) which become the dominant source of loss in the few-photon and low temperature regime. In this study, capacitively-coupled aluminum half-wavelength coplanar waveguide resonators are investigated. Surprisingly, the loss of the resonators is observed to decrease with a lowering temperature at low excitation powers and temperatures below the TLS saturation. This behavior is attributed to the reduction of the TLS resonant response bandwidth with decreasing temperature and power to below the detuning between the TLS and the resonant photon frequency in a discrete ensemble of TLS. When response bandwidths of TLS are smaller than their detunings from the resonance, the resonant response and thus the loss is reduced. At higher excitation powers, the loss follows a logarithmic power dependence, consistent with predictions from the generalized tunneling model (GTM). A model combining the discrete TLS ensemble with the GTM is proposed and matches the temperature and power dependence of the measured internal loss of the resonator with reasonable parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Additive‐Free Aqueous MXene Inks for Thermal Inkjet Printing on Textiles

Abstract Direct printing of functional inks onto flexible substrates allows for scalable fabrication of wearable electronics. However, existing ink formulations for inkjet printing require toxic solvents and additives, which make device fabrication more complex, limit substrate compatibility, and hinder device performance. Even water‐based carbon or metal nanoparticle inks require supplemental surfactants, binders, and cosolvents to produce jettable colloidal suspensions. Here, a general approach is demonstrated for formulating conductive inkjet printable, additive‐free aqueous Ti 3 C 2 T x MXene inks for direct printing on various substrates. The rheological properties of the MXene inks are tuned by controlling the Ti 3 C 2 T x flake size and concentration. Ti 3 C 2 T x ‐based electrical conduits and microsupercapacitors (MSCs) are printed on textile and paper substrates by optimizing the nozzle geometry for high‐resolution inkjet printing. The chemical stability and electrical properties of the printed devices are also studied after storing the devices for six months under ambient conditions. Current collector‐free, textile‐based MSCs show areal capacitance values up to 294 mF cm −2 (2 mV s −1 ) in poly(vinyl alcohol)/sulfuric acid gel electrolyte, surpassing reported printed MXene‐based MSCs and inkjet‐printed MSCs using other 2D nanomaterials. This work is an important step toward increasing the functional capacity of conductive inks and simplifying the fabrication of wearable textile‐based electronics.

Uzun, Simge↗