Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXPECTATION VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Real-time standoff detection of nitrogen isotopes in ammonia plumes using a swept external cavity quantum cascade laser

A swept-wavelength external cavity quantum cascade laser is used to measure time-resolved 15NH3 and 14NH3 concentrations and isotope ratios in a turbulent plume source located at 10 m standoff distance. Measurements show excellent agreement with expected values of isotope ratios for samples with natural and enriched 15N abundance. Detection sensitivity of 150 ppb*m is demonstrated for a 50 ms measurement interval, improving to 10 ppb*m with 10 s averaging, with isotopic precision as good as 0.8%.

Phillips, Mark C.↗

Anomaly Attribution with Likelihood Compensation

This paper addresses the task of explaining anomalous predictions of a black-box regression model. When using a black-box model, such as one to predict building energy consumption from many sensor measurements, we often have a situation where some observed samples may significantly deviate from their prediction. It may be due to a sub-optimal black-box model, or simply because those samples are outliers. In either case, one would ideally want to compute a responsibility score indicative of the extent to which an input variable is responsible for the anomalous output. In this work, we formalize this task as a statistical inverse problem: Given model deviation from the expected value, infer the responsibility score of each of the input variables. We propose a new method called likelihood compensation (LC), which is founded on the likelihood principle and computes a correction to each input variable. To the best of our knowledge, this is the first principled framework that computes a responsibility score for real valued anomalous model deviations. We apply our approach to a real-world building energy prediction task and confirm its utility based on expert feedback.

Idé, Tsuyoshi↗

Reliability analysis of the influence of seepage on levee stability

Reliability analysis is used to evaluate the probability of failure of a flood defence embankment subject to a blanket layer foundation condition, where high seepage forces increase the likelihood of internal erosion and slope failure. The stochastic effect of hydraulic conductivity and blanket layer thickness, in addition to soil shear strength properties, is considered for the underseepage and slope stability failure modes using the first-order reliability method. The blanket layer thickness controls the factor of safety (F) and reliability, followed by the unit weight of the blanket layer. Despite variation over orders of magnitude, hydraulic conductivity is less important than and comparable to the effect of soil shear strength parameters. Aleatory uncertainty is evaluated using fragility curves and a confidence interval on the expected value of F (stochastic F). Uncertainty in probability distribution parameters allows quantification of a subset of epistemic uncertainty and is used to construct confidence intervals for fragility.

58 GEOSCIENCES↗

Search for events with large missing transverse momentum, jets, and at least two tau leptons in 7 TeV proton–proton collision data with the ATLAS detector

CERN-LHC. A study of events in proton-proton collisions at a centre-of-mass energy of 7 TeV characterised by having large missing transverse momentum, jets and at least two tau leptons from a data sample of integrated luminosity 2 fb-1. The analysis finds no excesses above the Standard Model and presents lower limits on the GMSB breaking scale, Lambda, and the ratio of the vacuum expectation values of the two Higgs doublets, tan(beta). Data on the acceptances and efficiencies are given here taken from the auxilliary material linked below.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FECM/NETL Offshore CO2 Saline Storage Cost Model

The FECM/NETL Offshore CO2 Saline Storage Cost Model (CO2_S_COM_Offshore) estimates costs for a CO2 storage project in an offshore saline formation or reservoir. It is applicable for storage projects located on the Outer Continental Shelf of the Gulf of America. The purpose is to model the costs associated with a project, using simplified geo-engineering equations to calculate reservoir values needed to determine costs (such as CO2 plume area and number of injection wells). To use the model, change any of the inputs, which are always in orange cells, to the values you desire. Although there are numerous values that can be changed, the values expected to be of most interest have input cells on the 'Key_Inputs' sheet. Last update: 5/2/2025; Version 1.1 corrects bug in reservoir thickness calculations.

Carbon storage↗

Topological order in matrix Ising models

We study a family of models for an N_1 \times N_2 N 1 × N 2 matrix worth of Ising spins S_{aB} S a B . In the large N_i N i limit we show that the spins soften, so that the partition function is described by a bosonic matrix integral with a single ‘spherical’ constraint. In this way we generalize the results of to a wide class of Ising Hamiltonians with O(N_1,\mathbb{Z})\times O(N_2,\mathbb{Z}) O ( N 1 , ℤ ) × O ( N 2 , ℤ ) symmetry. The models can undergo topological large N N phase transitions in which the thermal expectation value of the distribution of singular values of the matrix S_{aB} S a B becomes disconnected. This topological transition competes with low temperature glassy and magnetically ordered phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying the Impact of Single Bit Flips on Floating Point Arithmetic

In high-end computing, the collective surface area, smaller fabrication sizes, and increasing density of components have led to an increase in the number of observed bit flips. If mechanisms are not in place to detect them, such flips produce silent errors, i.e. the code returns a result that deviates from the desired solution by more than the allowed tolerance and the discrepancy cannot be distinguished from the standard numerical error associated with the algorithm. These phenomena are believed to occur more frequently in DRAM, but logic gates, arithmetic units, and other circuits are also susceptible to bit flips. Previous work has focused on algorithmic techniques for detecting and correcting bit flips in specific data structures, however, they suffer from lack of generality and often times cannot be implemented in heterogeneous computing environment. Our work takes a novel approach to this problem. We focus on quantifying the impact of a single bit flip on specific floating-point operations. We analyze the error induced by flipping specific bits in the most widely used IEEE floating-point representation in an architecture-agnostic manner, i.e., without requiring proprietary information such as bit flip rates and the vendor-specific circuit designs. We initially study dot products of vectors and demonstrate that not all bit flips create a large error and, more importantly, expected value of the relative magnitude of the error is very sensitive on the bit pattern of the binary representation of the exponent, which strongly depends on scaling. Our results are derived analytically and then verified experimentally with Monte Carlo sampling of random vectors. Furthermore, we consider the natural resilience properties of solvers based on the fixed point iteration and we demonstrate how the resilience of the Jacobi method for linear equations can be significantly improved by rescaling the associated matrix.

Elliott, James J.↗

Simulation of Statistical Fluctuations in the Spin Precession Measurements at RHIC

Measurements of the driven spin coherent precession S x (t)=S x (0) - S x (1) sin(ωt+φ 0 ) were initiated in RHIC Run13. The expected value of the precession amplitude S x (1) ~ 2 x 10 -4 is about the statistical error in a single measurement and data fit gives a biased estimate of the S x (1) . For a proper statistical interpretation of the results of the several measurements, statistical fluctuations were studied using Monte-Carlo simulation. Preliminary results of the spin precession measurements in RHIC Run13 are presented.

43 PARTICLE ACCELERATORS↗

Extending the radial diffusion model of Falthammar to non-dipole background field

A model for radial diffusion caused by electromagnetic disturbances was published by Falthammar (1965) using a two-parameter model of the disturbance perturbing a background dipole magnetic field. Schulz and Lanzerotti (1974) extended this model by recognizing the two parameter perturbation as the leading (non--dipole) terms of the Mead Williams magnetic field model. They emphasized that the magnetic perturbation in such a model induces an electric ield that can be calculated from the motion of field lines on which the particles are ‘frozen’. Roederer and Zhang (2014) describe how the field lines on which the particles are frozen can be calculated by tracing the unperturbed field lines from the minimum-B location to the ionospheric footpoint, and then tracing the perturbed field (which shares the same ionospheric footpoint due to the frozen -in condition) from the ionospheric footpoint back to a perturbed minimum B location. The instantaneous change n Roederer L*, dL*/dt, can then be computed as the product (dL*/dphi)*(dphi/dt). dL*/Dphi is linearly dependent on the perturbation parameters (to first order) and is obtained by computing the drift across L*-labeled perturbed field lines, while dphi/dt is related to the bounce-averaged gradient-curvature drift velocity. The advantage of assuming a dipole background magnetic field, as in these previous studies, is that the instantaneous dL*/dt can be computed analytically (with some approximations), as can the DLL that results from integrating dL*/dt over time and computing the expected value of (dL*)^2. The approach can also be applied to complex background magnetic field models like T89 or TS04, on top of which the small perturbations are added, but an analytical solution is not possible and so a numerical solution must be implemented. In this talk, I discuss our progress in implementing a numerical solution to the calculation of DL*L* using arbitrary background field models with simple electromagnetic perturbations.

58 GEOSCIENCES↗

Development and Validation of a Lifecycle-based Prognostics Architecture with Test Bed Validation

On-line monitoring and tracking of nuclear plant system and component degradation is being investigated as a method for improving the safety, reliability, and maintainability of aging nuclear power plants. Accurate prediction of the current degradation state of system components and structures is important for accurate estimates of their remaining useful life (RUL). The correct quantification and propagation of both the measurement uncertainty and model uncertainty is necessary for quantifying the uncertainty of the RUL prediction. This research project developed and validated methods to perform RUL estimation throughout the lifecycle of plant components. Prognostic methods should seamlessly operate from beginning of component life (BOL) to end of component life (EOL). We term this "Lifecycle Prognostics." When a component is put into use, the only information available may be past failure times of similar components used in similar conditions, and the predicted failure distribution can be estimated with reliability methods such as Weibull Analysis (Type I Prognostics). As the component operates, it begins to degrade and consume its available life. This life consumption may be a function of system stresses, and the failure distribution should be updated to account for the system operational stress levels (Type II Prognostics). When degradation becomes apparent, this information can be used to again improve the RUL estimate (Type III Prognostics). This research focused on developing prognostics algorithms for the three types of prognostics, developing uncertainty quantification methods for each of the algorithms, and, most importantly, developing a framework using Bayesian methods to transition between prognostic model types and update failure distribution estimates as new information becomes available. The developed methods were then validated on a range of accelerated degradation test beds. The ultimate goal of prognostics is to provide an accurate assessment for RUL predictions, with as little uncertainty as possible. From a reliability and maintenance standpoint, there would be improved safety by avoiding all failures. Calculated risk would decrease, saving money by avoiding unnecessary maintenance. One major bottleneck for data-driven prognostics is the availability of run-to-failure degradation data. Without enough degradation data leading to failure, prognostic models can yield RUL distributions with large uncertainty or mathematically unsound predictions. To address these issues a "Lifecycle Prognostics" method was developed to create RUL distributions from Beginning of Life (BOL) to End of Life (EOL). This employs established Type I, II, and III prognostic methods, and Bayesian transitioning between each Type. Bayesian methods, as opposed to classical frequency statistics, show how an expected value, a priori, changes with new data to form a posterior distribution. For example, when you purchase a component you have a prior belief, or estimation, of how long it will operate before failing. As you operate it, you may collect information related to its condition that will allow you to update your estimated failure time. Bayesian methods are best used when limited data are available. The use of a prior also means that information is conserved when new data are available. The weightings of the prior belief and information contained in the sampled data are dependent on the variance (uncertainty) of the prior, the variance (uncertainty) of the data, and the amount of measured data (number of samples). If the variance of the prior is small compared to the uncertainty of the data, the prior will be weighed more heavily. However, as more data are collected, the data will be weighted more heavily and will eventually swamp out the prior in calculating the posterior distribution of model parameters. Fundamentally Bayesian analysis updates a prior belief with new data to get a posterior belief. The general approach to applying the Bayesian method to lifecycle prognostics consisted of identifying the prior, which is the RUL estimate and uncertainty from the previous prognostics type, and combining it with observational data related to the newer prognostics type. The resulting lifecycle prognostics algorithm uses all available information throughout the component lifecycle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Search for a Standard Model Higgs boson in the $\tau\tau$ decay channel produced in $p\bar{p}$ collisions at $\sqrt{s}$ = 1.96 TeV at Tevatron

This thesis describes the search for the Standard Model Higgs boson decaying to tau lepton pairs, in the Tevatron proton-antiproton collisions at a center of mass energy $\sqrt{s}$ = 1.96 TeV. The search is based on approximately 2.3 fb$^{-1}$ of CDF Run II data and is performed by considering the following signal processes: WH($\rightarrow\tau\tau$), ZH($\rightarrow\tau\tau$), qHq'$\rightarrow$q$\tau\tau$q' and gg$\rightarrow$H$\rightarrow\tau\tau$. Events are selected by requiring an hadronic tau and one isolated electron or muon, coming from the leptonic decay of one of the two taus. In addition, at least one calorimeter jet must be present in the final state. We expect 921.8$\pm$48.9 background events in the 1 jet channel and 159.4$\pm$11.6 in the $\ge$ 2 jets channel, while in data we observe 965 and 166 events, respectively. In order to improve the search sensitivity we employ a multivariate technique, based on a set of Boosted Decision Trees trained to get the best sep aration between signal and the dominant sources of background. We observe no evidence for a Higgs boson signal and therefore we set a 95\% confidence level (C.L.) upper limit on the cross section relative to the SM predictions ($\sigma/\sigma_{\mathrm{SM}}$). Results are presented for the Higgs boson mass varying from M$_\mathrm{H}$ = 100 GeV/$c^2$ to M$_\mathrm{H}$ = 150 GeV/$c^2$. For the mass hypothesis of 120 GeV/c$^2$ the observed limit is 27.2, while the corresponding expected value is 23.4$^{+9.8}_{-6.4}$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photon Next-Event Estimator Implementation in MCATK

A photon next-event fluence estimator at a point has been implemented in the Monte Carlo Application Toolkit (MCATK). The next-event estimator provides an expected value estimator for the flux at a point due to all source and collision events. An advantage of the next-event estimator over track-length estimators, which are normally employed in MCATK, is that flux estimates can be made in locations that have no random walk particle tracks. The next-event estimator allows users to calculate radiographs and estimate response for detectors outside of the modeled geometry. The next-event estimator is not yet accessable through the MCATK FlatAPI for C and Fortran. The next-event estimator in MCATK has been tested against MCNP6 using 5 suites of test problems. No issues were found in the MCATK implementation. One issue was found in the exclusion radius approximation in MCNP6. The theory, implementation, and testing are described in this document.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phenomena-based Uncertainty Quantification in Predictive Coupled- Physics Reactor Simulations

This project has sought to develop methodologies, tailored to phenomena that govern nuclearreactor behavior, to produce predictions (including uncertainties) for quantities of interest (QOIs) in the simulation of steady-state and transient reactor behavior. Examples of such predictions include, for each QOI, an expected value as well as a distribution around this value and an assessment of how much of the distribution stems from each major source of uncertainty. The project has sought to test its methodologies by comparing against measured experimental outcomes. The main experimental platform has been a 1-MW TRIGA reactor. This is a flexible platform for a wide range of experiments, including steady state with and without temperature feedback, slow transients with and without feedback, and rapid transients with strong feedback. The original plan was for the primary experimental data to come from in-core neutron detectors. We made considerable progress toward this goal but did not get as far along as we had planned. We have designed, developed, installed, and tested vertical guide tubes, each able to accept a detector or stack of detectors that can be moved axially inside the tube, and we have tested several new detector designs. One of these shows considerable promise.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The experimental study of the phase structure of strongly interacting matter

Over the duration of the project period, our research has been focused on the beam energy scan data conducted at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory in order to search for the location of the Critical End Point (CEP) temperature or cross-over in the nuclear phase diagram using the STAR detector at RHIC and to determine the Equation of State (EOS) and the QGP transport coefficients. Working at the RHIC early on, we discovered the Long Range forward-backward multiplicity Correlations (LRC) which quantitatively confirmed the predictions of saturation models, in particular, the Color Glass Condensate (CGC) and the Color String Percolation Model (CSPM). We have used the CSPM to extract the initial temperature from the data. The clustering of color sources may be the way to achieve thermalization in A-A and N-N collisions. Recently we also used CSPM to measure the shear viscosity to entropy ratio at RHIC and LHC temperatures. The ratios are in agreement with values expected for a strongly interacting QGP. The thermodynamic quantities,temperature and the equation of state are in agreement with lattice QCD.

42 ENGINEERING↗

Topics in the AdS/CFT Correspondence: Precision tests with Wilson loops, quantum black holes and dualities

The Anti de Sitter/Conformal Field Theory (AdS/CFT) correspondence conjectures a mathematical equivalence between string theories and gauge theories. This correspondence and its generalizations allow to address difficult problems of strongly coupled field theory dynamics using weakly couple gravity. It also allows to tackle fundamental questions of gravity, such as black hole entropy, using field theories. The research supported by this grant focused on quantum aspects of the AdS/CFT correspondence at sub-leading level. Various results were obtained for expectation values of supersymmetric Wilson loops and for sub-leading entropy corrections of certain asymptotically AdS black holes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Benchmark Analysis of the HTR-10 with the MAMMOTH Reactor Physics Application

This report documents a set of benchmarks used to validate the Serpent and MAMMOTH neutron transport models of the HTR-10 reactor developed at Idaho National Laboratory. The high-fidelity Serpent Monte Carlo models of the HTR-10 critical and full core configurations include both random, discrete distributions of TRISO particles in the pebbles and random, discrete pebble distributions in the pebble bed core. The Serpent results agree very well with the critical and control rod worth measurements provided in the International Re- actor Physics Experiment Evaluation Project (IRPhEP) report if the ENDF/B-VII.r1 data- set is used. These Serpent models are subsequently used to prepare cross sections and flux tallies in a 10 coarse energy group structure for the MAMMOTH Reactor Physics MOOSE- based application. We find that MAMMOTH can reproduce the Monte Carlo solution for the HTR-10 reactor by using the PJFNK-SPH equivalence method. In all cases studied, the MAMMOTH results are within 120 pcm of the Monte Carlo reference calculation and the maximum errors in neutron absorption and generation rates are within 0.536% and 0.215% from the reference calculation, respectively. A set of benchmark exercises from the International Atomic Energy Agency (IAEA) HTR-10 benchmark in IAEA-TECDOC-1382 were conducted including parts B1 (critical), B2 (temperature coefficient) and B3 (control rod worth). The results we obtain for the critical core are in excellent agreement with the expected value and we confirm that with ENDF/B-VII.r1 data we match the critical eigen- value keff=1 to within 100 pcm. Our temperature coefficient calculation is consistent with the VSOP results generated by the German participants. The Chinese and South African VSOP models produce lower temperature coefficients, a fact that was noted in the original IAEA benchmark, but for which no explanation was provided. Both a full and single control rod worth calculations with Serpent and MAMMOTH agree well with the results from the IAEA benchmark. Finally, and most importantly, this work demonstrates that MAM- MOTH can recover the Monte Carlo high-fidelity solutions to an excellent accuracy using the PJFNK-SPH method. This sets the stage for the ultimate goal of using MAMMOTH in transient, multi-physics scenarios where correction of the cross sections is obtained for steady-state conditions and then used in the transient scenario for which no Monte-Carlo solution is available.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Determining the Release of Radionuclides from SRS Tank 12H Waste Residual Solids Following Tank Closure

Eight High Level Waste (HLW) tanks used to store radioactive waste slurries have been emptied and closed at the Savannah River Site (SRS). Performance Analyses (PA) modeling of the release of radionuclides from residual waste solids in these tanks into the environment over extended time periods indicated the most likely risk drivers for environmental contamination. Radionuclide leaching studies were desired to provide additional information regarding the residual waste solubility assumptions used in the models. This report serves to provide equilibrium solubility data for several radionuclides identified as risk drivers and adds to the database of solubility values reported in the previous analogous study with Tank 18F solids. Pore water leaching studies were conducted on actual SRS Tank 12H residual waste solids to support Liquid Waste tank closure efforts and closed tank Performance Analyses. Tank 12H was exposed to extensive mechanical cleaning, caustic aluminum dissolution, and oxalic acid chemical cleaning prior to closure. The methodology utilized for leach testing was developed during previous testing. Slurries of tank residual solids and grout-representative solids in simulated grout pore water solutions (based on SRS groundwater compositions) with pH and E h values expected during the aging of the closed waste tank were produced. The soluble concentrations of selected radionuclides were analyzed versus time to confirm equilibrium conditions were achieved. These are the first leach studies conducted on waste tank residuals exposed to these cleaning conditions.

Eh↗

Quantifying Resolution Implications for Agent-based Distributed Energy Resource Customer Adoption Models

In this report we explore tradeoffs of top-down and bottom-up methods in their precision and computational burden using NREL's dGen model, an agent-based model of residential and non-residential distributed PV adoption. In particular, we assess the role of agent resolution in instantiating statistically-representative populations in the model--and the resulting variance of model projections at the state, sector and county levels. Running the model for a single state with fixed macroeconomic assumptions, we vary both the number of agents instantiated and the number of unique simulations. Notably, in each run we introduce sources of uncertainty in cumulative DPV adoption results during agent instantiation as we stochastically sample agent attributes from localized building characteristic and solar resource distributions. We find three key trends which guide what can be expected of results. First, precision of the model projections, as measured by the variance of the unique simulations increased as a function of the number of agents sampled, though with diminishing returns to scale. The result is expected given the Law of Large Numbers. Second, the mean or expected value of projections decreased as the number of agents instantiated increased. Empirically, aggregate DPV capacities projected by dGen are 7% lower on average at a 10-agent resolution compared to 1-agent resolutions, and up to 10% lower in the non-residential sector. We attribute this outcome to a system sizing scheme that biases lower cumulative installed capacity as agent resolution increases when roof size and load are not positively correlated. Finally, the variance of model projections differed by sector, where variance was substantially larger in the commercial sector, largely due to differences in parameterization by sector. We explain the larger variance in the non-residential sector as an outcome of the greater variance in building uses and load shapes as compared to the residential sector, and we find that a resolution on the order of 100-agents per county would be necessary to bring non-residential variance in line with residential variance at a 2-agent resolution. We propose that further research explore increasing precision and agent resolution in the non-residential sector. Moreover, given that days of intensive computing may be required to resolve a suitable estimate even at the extent of a single state within acceptable levels of precision, to promote computational efficiency we also suggest more clearly quantifying sources of variability at the county level such that resolution can by dynamically increased where county level results are least precise.

14 SOLAR ENERGY↗