Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conclusions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Validation Assessment of Turbulent Reacting Flow Model Using The Area-Validation Metric on Medium-Scale Methanol Pool Fire Results

Accident analysis and ensuring power plant safety are pivotal in the nuclear energy sector. Significant strides have been achieved over the past few decades regarding fire protection and safety, primarily centered on design and regulatory compliance. Yet, after the Fukushima accident a decade ago, the imperative to enhance measures against fire, internal flooding, and power loss has intensified. Hence, a comprehensive, multilayered protection strategy against severe accidents is needed. Consequently, gaining a deeper insight into pool fires and their behavior through extensive validated data can greatly aid in improving these measures using advanced validation techniques. A model validation study was performed at Sandia National Laboratories in which a 30-cm diameter methanol pool fire was modeled using the SIERRA/Fuego turbulent reacting flow code. This validation study used a standard validation experiment to compare model results against, and conclusions have been published. The fire was modeled with a Large Eddy Simulation (LES) turbulence model with subgrid turbulent kinetic energy closure. Combustion was modeled using a strained laminar flamelet library approach. Radiative heat transfer was accounted for with a model utilizing the gray-gas approximation. In the present study, additional validation analysis is performed using the area validation metric (AVM). These activities are done on multiple datasets involving different variables and temporal/spatial ranges and intervals. In conclusion, the results provide insight into the use of the area validation metric on such temporally varying datasets and the importance of physics-aware use of the metric for proper analysis.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

Measurements of soil protist richness and community composition are influenced by primer pair, annealing temperature, and bioinformatics choices

ABSTRACT Protists are a diverse and understudied group of microbial eukaryotic organisms especially in terrestrial environments. Advances in molecular methods are increasing our understanding of the distribution and functions of these creatures; however, there is a vast array of choices researchers make including barcoding genes, primer pairs, PCR settings, and bioinformatic options that can impact the outcome of protist community surveys. Here, we tested four commonly used primer pairs targeting the V4 and V9 regions of the 18S rRNA gene using different PCR annealing temperatures and processed the sequences with different bioinformatic parameters in 10 diverse soils to evaluate how primer pair, amplification parameters, and bioinformatic choices influence the composition and richness of protist and non-protist taxa using Illumina sequencing. Our results showed that annealing temperature influenced sequencing depth and protist taxon richness for most primer pairs, and that merging forward and reverse sequencing reads for the V4 primer pairs dramatically reduced the number of sequences and taxon richness of protists. The data sets of primers that targeted the same 18S rRNA gene region (e.g., V4 or V9) had similar protist community compositions; however, data sets from primers targeting the V4 18S rRNA gene region detected a greater number of protist taxa compared to those prepared with primers targeting the V9 18S rRNA region. There was limited overlap of protist taxa between data sets targeting the two different gene regions (80/549 taxa). Together, we show that laboratory and bioinformatic choices can substantially affect the results and conclusions about protist diversity and community composition using metabarcoding. IMPORTANCE Ecosystem functioning is driven by the activity and interactions of the microbial community, in both aquatic and terrestrial environments. Protists are a group of highly diverse, mostly unicellular microbes whose identity and roles in terrestrial ecosystem ecology have been largely ignored until recently. This study highlights the importance of choices researchers make, such as primer pair, on the results and conclusions about protist diversity and community composition in soils. In order to better understand the roles protist taxa play in terrestrial ecosystems, biases in methodological and analytical choices should be understood and acknowledged.

Biotechnology & Applied Microbiology↗
DOE OSTI2020

What do Coulombic Efficiency and Capacity Retention Truly Measure? A Deep Dive into Cyclable Lithium Inventory, Limitation Type, and Redox Side Reactions

Here, the battery performance metrics of Coulombic efficiency (CE) and capacity retention (CR) are derived in terms of cycling current and side-reaction currents at each electrode. A cyclable lithium inventory (CLI) framework is developed to explain the fundamental differences between inventory-limited and site-limited cells. The otherwise unmeasurable oxidation and reduction side-reaction currents are expressed in terms of cycling current, CE, and CR for both limitation types. Important conclusions regarding cyclable lithium inventory, limitation type, and the interpretation of CE and CR are discussed. From the framework, CE depends on either the oxidation side-reaction current or the reduction side-reaction current, but not both. CE and CR depend on cell limitation type and are increased by faster cycling. Experiments are presented to support the framework and demonstrate that cells can transition between limitation types. These conclusions are presented in terms of lithium-ion batteries, but this framework may be extended to describe other battery systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Effects of Vegetation and Topography on the Boundary Layer Structure above the Amazon Forest

Observational data from two field campaigns in the Amazon forest were used to study the vertical structure of turbulence above the forest. The analysis was performed using the reduced turbulent kinetic energy (TKE) budget and its associated two-dimensional phase space. Results revealed the existence of two regions within the roughness sublayer in which the TKE budget cannot be explained by the canonical flat-terrain TKE budgets in the canopy roughness sublayer or in the lower portion of the convective ABL. Data analysis also suggested that deviations from horizontal homogeneity have a large contribution to the TKE budget. Results from LES of a model canopy over idealized topography presented similar features, leading to the conclusion that flow distortions caused by topography are responsible for the observed features in the TKE budget. These results support the conclusion that the boundary layer above the Amazon forest is strongly impacted by the gentle topography underneath.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Revisiting the Role of Ocean Circulation Changes in Polar Ocean Heat Transport Anomalies under Global Warming

In response to greenhouse gas forcing, climate models predict that poleward ocean heat transport (OHT) weakens in the Southern Ocean but increases in the Arctic. The role of ocean circulation changes in this OHT response has been evaluated by decomposing OHT anomalies into a dynamic component (holding ocean temperature fixed while circulation evolves) and a thermodynamic component (holding ocean circulation fixed while temperature evolves). However, ocean temperature changes are themselves shaped by circulation changes through redistribution of the existing heat reservoir and subsequent effects on air–sea heat fluxes. The thermodynamic component can therefore be influenced by circulation changes, making the standard thermodynamic–dynamic decomposition incomplete for isolating the role of circulation changes in OHT anomalies. To address this issue, we use a passive–active decomposition to assess the relative contributions of ocean circulation and passive ocean temperature changes to polar OHT anomalies in a fully coupled climate model. Passive temperature changes are defined as those thermally forced by the atmosphere in the absence of circulation changes. In this passive–active decomposition, an advective term involving both circulation and passive temperature changes remains ambiguous—classifying it as active implies circulation changes dominate Southern Ocean OHT anomalies, whereas classifying it as passive implies temperature changes dominate. However, both interpretations imply that ocean circulation changes have a much weaker effect on polar OHT anomalies than inferred from the standard decomposition. In conclusion, these results help reconcile conclusions from studies using the standard decomposition with those using passive tracer methods to assess the role of circulation changes in polar OHT anomalies.

Arctic↗
DOE OSTI2022

A novel post-processing method for progressive failure analysis of brittle composite compression

Finite element analysis of brittle materials in axial compression typically uses element deletion to allow continued global deformation post-element-failure. However, element deletion produces cyclic load-displacement curves that underestimate energy absorption and are not representative of a continuum system. Two key observations support the conclusion that results from an appropriately discretized model can be an adequate representation of a continuum system. Specifically, the frequency of the oscillations in the load-displacement curve is directly dependent upon element length in the loading direction, and the peak amplitudes of oscillations are mesh size independent. A method of post-processing the analysis results, by connecting the peak amplitudes of oscillations, is proposed and applied to a series of continuous carbon fiber composite crush tubes. The load-displacement curve, stable crushing load, and specific energy absorption of the post-processed results compare well to an experimental study of crush tubes with similar layups.

Materials Science↗
DOE OSTI2022

Investigation of Plasmodium falciparum pfhrp2 and pfhrp3 gene deletions and performance of a rapid diagnostic test for identifying asymptomatic malaria infection in northern Ethiopia, 2015

Background: Rapid diagnostic tests (RDTs) are widely used for malaria diagnosis of both symptomatic and asymptomatic infections. Although RDTs are a reliable and practical diagnostic tool, the sensitivity of histidine-rich protein 2 (HRP2)-based RDTs can be reduced if pfhrp2 or pfhrp3 (pfhrp2/3) gene deletions exist in the Plasmodium falciparum parasite population. This study evaluated dried blood spot (DBS) samples collected from a national household survey to investigate the presence of pfhrp2/3 deletions and the performance of the RDT used in the cross-sectional survey in a low transmission setting. Methods: The 2015 Ethiopia Malaria Indicator Survey tested household members by RDT and collected DBS samples. DBS (n = 2648) from three regions in northern Ethiopia were tested by multiplex bead-based antigen detection assay after completion of the survey. The multiplex assay detected pan-Plasmodium lactate dehydrogenase (LDH), pAldolase, and HRP2 antigens in samples. Samples suspected for pfhrp2/3 gene deletions (pLDH and/or pAldolase positive but low or absent HRP2) were further investigated by molecular assays for gene deletions. Antigen results were also compared to each individual’s RDT results. Dose–response logistic regression models were fit to estimate RDT level of detection (LOD) antigen concentrations at which 50, 75, 90, and 95% of the RDTs returned a positive result during this survey. Results: Out of 2,648 samples assayed, 29 were positive for pLDH or pAldolase antigens but low or absent for HRP2 signal, and 15 of these samples (51.7%) were successfully genotyped for pfhrp2/3. Of these 15 P. falciparum infections, eight showed single deletions in pfhrp3, one showed a single pfhrp2 deletion, and six were pfhrp2/3 double-deletions. Six pfhrp2 deletions were observed in Tigray and one in Amhara. Twenty-five were positive for HRP2 by the survey RDT while the more sensitive bead assay detected 30 HRP2-positive samples. A lower concentration of HRP2 antigen generated a positive test result by RDT compared to pLDH (95% LOD: 16.9 ng/mL vs. 319.2 ng/mL, respectively). Conclusions: There is evidence of dual pfhrp2/3 gene deletions in the Tigray and Amhara regions of Ethiopia in 2015. As the prevalence of malaria was very low (< 2%), it is difficult to make strong conclusions on RDT performance, but these results challenge the utility of biomarkers in household surveys in very low transmission settings.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Evaluating isoprenol production using the IPP-bypass pathway in the oleaginous yeast Rhodosporidium toruloides

Background To strengthen the national energy supply, there is an increasing demand for domestically generated aviation fuels. Bio-derived advanced aviation fuels offer the opportunity to meet this domestic need while presenting a unique opportunity to investigate the production of novel aviation fuels. Isoprenol, a chemical precursor to such novel fuels, has been shown to be a biologically producible compound in model organisms, but its bio-producibility needs to be further explored in organisms more compatible with industrial bioproduction. Results In this work, we evaluate isoprenol production using the promising bioproduction yeast, Rhodosporidium toruloides. First, we show successful isoprenol production using the IPP-bypass pathways most successful in laboratory strains of E. coli and S. cerevisiae. Next, we demonstrate that increased flux through the mevalonate pathway only modestly increases isoprenol titers. Using proteomics, we identified a potential bottleneck in production at the final step in the IPP-bypass pathway and explored alternative enzymes for this step. Finally, the top three strains of R. toruloides were evaluated in sorghum hydrolysates generated using cholinium lysinate. Through this work, 93.1 mg/L of isoprenol was produced in mock medium and 27.3 mg/L in sorghum hydrolysates. Conclusion Together these results lay the foundation for future work for the production of isoprenol from bioproduction crops.

Advanced aviation fuel↗
DOE OSTI2020

Energy Efficient Thermoplastic Composite Manufacturing

The objective of the project was to establish an effective and affordable method to lay-up and consolidate/join large thermoplastic composite aerospace structure with cycle times measured in minutes rather than hours. Composite airplane designs have proven efficient and effective however future potential product production rates are challenging what the current systems can efficiently produce due to material lay-down constraints and extended thermal cycle times. The ability to lay-up then rapidly heat, consolidate, and cool large complex composite structures plus very accurately tool them (i.e. matching CTE of composite materials) along with very precise thermal control is a difficult challenge. Current systems such as autoclave processing of thermoset materials require long cycle times due to method of heating and the large associated thermal masses. These extended cycle times inhibit the ability to meet higher rate production scenarios due to the need for multiple sets of equipment and tools. Thermoplastic composite materials were used to facilitate more rapid cycle times via the elimination of a need for a cure dwell at temperature. Also, utilized induction heating along with smart susceptors to enable the quick cycle times needed while providing precise intrinsic thermal control. The intrinsic control of the induction heating process via the smart susceptors along with the use of laser assisted fiber placement were the key innovations areas developed. The ability to rapidly heat and then precisely control the temperature of the consolidation component was paramount to the success of this project. It is this unique processing attribute coupled with the thermoplastic material characteristics along with rapid lay-up methods that are novel and advantageous. While many requirements and influencing factors decide the materials and processes utilized for future airplane construction, the forecast of accelerated production rates and the recent performance successes of composites in airplane construction provide an opportunity for this processing technology to have significant influence. During the course of this project a number of key accomplishments were completed. They are as follows: The needed laser assisted fiber placement capabilities have been developed and validated on a component of meaningful scale and complexity. Subsequently, a thermoplastic preform of the part scale-up part design was laser assisted fiber placed and made availalbe for consolidation. An induction consolidation system was sized, designed, and fabricated resulting in the full capability to consolidate the scale-up component. The tool for induction consolidating of the scale-up component was designed and fabricated. An aluminum pressure bladder was welded and formed for use as the pressurization membrane to perform the needed application of pressure on the part at temperature to achieve consolidation. The induction consolidation system consisting of the restraint, induction power supply, induction tool with integrated induction coils and smart susceptor liners, along with the aluminum bladder were successfully used to consolidate a large thermoplastic skin. The capability of accomplishing rapid heat-up rates and cool down rates for consolidation of large thermoplastic skins with precise thermal control and even pressure application at the consolidation temperature was validated. The general conclusion is that the use of induction consolidation with smart susceptors is an effective method to rapidly and efficiently consolidate large thermoplastic composite components and enable affordable high rate manufacturing of composites. More specific conclusions generated by this project are as follows: A restraint type induction consolidation system provides an affordable option over the standard press when using the induction consolidation processing method. Aluminum bladders can be formed to the complex shapes needed and supply uniform pressure for consolidation and co-consolidation of thermoplastic composite materials. Straightforward modifications can be made to existing fiber placement robotic systems to enable their use for thermoplastic lay-up applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Hanging String Cuts in SPR Caverns: Modeling Investigation and Comparison with Sonar Data

Investigation of leaching for oil sales includes looking closely at cavern geometries. Anomalous cavern "features" have been observed near the foot of some caverns subsequent to partial drawdowns. One potential mitigation approach to reducing further growth of preexisting features is based on the hypothesis that reducing the brine string length via a "string cue' would serve to move the zone associated with additional leaching to a location higher up in the cavern and thus away from the preexisting feature. Cutting of the hanging string is expected to provide a control of leaching depth that could be used to "smooth" existing features and thus reduce geomechanical instability in that region of the cavern. The SANSMIC code has been used to predict cavern geometry changes (i.e., the extent of cavern growth with depth) based on variable input parameters for four caverns: West Hackberry 11 (WH11), West Hackberry 113 (WH113), Big Hill 104 (BH104), Big Hill 114 (BH114). By comparing the initial sonar geometry with resultant geometries calculated by the SANSMIC code, conclusions may be drawn about the potential impact of these variables on future cavern growth. Ultimately, these conclusions can be used to assess possible mitigation strategies such as the potential advantage of cutting versus not cutting a brine string. This work has resulted in a recommendation that a hanging string cut of 80 ft in WH11 would be beneficial to future cavern geometry, while there would be little to no benefit to string cuts in the other three caverns investigated here. The WH11 recommendation was followed in 2019, resulting in an operational string cut. A sonar performed after the string cut showed no adverse leaching in the area of the preexisting flare, as expected from the results of the preliminary SANSMIC runs described in this report. Additional SANSMIC modeling of the actual amount of injected raw water resulted in good agreement with the post-cut sonar.

02 PETROLEUM↗
DOE OSTI2020

Simulation Analysis of Geometry and Material Effects for Dropkinson Bar

The reported research is motivated by the need to address a key issue affecting the Dropkinson bar apparatus. This unresolved issue is the interference of the stress wave reflected from the bar-beam boundary with the measurement of the stress-strain response of a material tested in the apparatus. The purpose of the wave beam that is currently connected to the bar is to dissipate the stress wave, but the portion of the wave reflected from the bar-beam boundary is still significant. First, we focused on understanding which parameters affect the reflected wave's arrival time at a strain gauge. Specifically, we used finite-element numerical simulations with the Sierra/SM module to study the effects of various bar-beam connection fixities, alternative wave beam materials, and alternative geometries of the Dropkinson bar system based on a monolithic design. The conclusion of this study is that a partial reflection always occurs at the bar-beam boundary (or, for a monolithic design, at a point where the bar geometry changes). Therefore, given a fixed total length of the bar, it is impossible to increase the reflected wave's arrival time by any significant amount. After reaching this conclusion, we focused instead on trying to minimize the energy of the reflected stress wave circulating up and down through the bar over a relatively long period of time (10 ms). Once again, we used numerical simulations with the Sierra/SM module to investigate the effects of various bar-beam connection fixities, alternative wave beam materials, and parameters of an asymmetric monolithic design of the bar-and-beam system. This study demonstrated that various parameters can significantly affect the energy of the wave reflections, with the difference between best and worst configurations being about one order of magnitude in terms of energy. Based on the obtained results, we conclude with concrete takeaways for Dropkinson bar users and propose potential directions for future research and optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Computational study of TATB

We have performed a computational study of TATB. The study is composed of two parts, one where we perform static T = 0 K calculations with several different DFT functionals, to investigate structural properties and obtain a cold curve. Even though the functionals used in this study give poor results at ambient pressure, they perform much better at compression, when the dominance of the van der Waals’ forces in the binding is replaced by more normal interactions. In particular AM05 gives good results, mainly because it doesn’t include any “faulty” van der Waals’. Indeed the van der Waals’ corrected functional (PBE+D2) results shows the worst performance on structural properties. For the cold curve the PBE+D2 functional gives the best results compared to experiments (room temperature) but since the structural properties were bad with this functional we cannot for sure say that this is in any way a validation. It is shown that scaling the AM05 results with a common factor reproduces the experimental data. We leave the question on why to a follow up study but speculate that maybe the experiment and our calculations do not represent the same system set-up. From the structural properties we identify a site in the TATB lattice that contains a high concentration of oxygen and hydrogen. The consequences of this finding, if any, are left to a future project. In the second part of the study we perform extensive high-quality DFT-MD (molecular dynamics with DFT forces) calculations to obtain points on the Hugoniot. This part of the study did not get finished within this project and a more extensive summary of this part will be given in a follow up report at a future date. However, we show that obtaining calculated data is essential for equations of state development since the existing experimental Hugoniot data barely deviates from room temperature isotherm data and thus give no information of the high temperature dependency of materials properties. Our conclusion so far in the project is that being able to calculate materials properties is essential for high explosives since experiments are unable to give information in the high temperature part of phase space. While blind use of DFT cannot (yet) give unambiguous answers, we can still explore qualitatively and use such information to guide us in EOS development. However, the main conclusion is that we need better functionals in DFT to easily extract needed properties from calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

MELCOR 2.2 Benchmarks of Peach Bottom NUREG/CR 7155 Uncertainty Analysis

The U.S. Nuclear Regulatory Commission (NRC) performed a first-of-a-kind uncertainty analysis (UA) of the accident progression, radiological releases, and offsite consequences for the State-of- the-Art Reactor Consequence Analyses (SOARCA) of an unmitigated long-term station blackout (LTSBO) severe accident scenario at the Peach Bottom Atomic Power Station. The objective of the UA was to evaluate the robustness of the SOARCA deterministic "best estimate results and conclusions documented in NUREG-1935, and to develop insight into the overall sensitivity of the SOARCA results to uncertainty in key modeling inputs. The study was completed in 2015 and documented in NUREG/CR-7155. Since 2015, two other SOARCA UAs were completed for two pressurized water reactor (PWR) plants. The PWR UAs incrementally updated the approach and methodology, including using the latest release of the MELCOR 2.2 computer code. There were also advances made in the state-of-the-art modeling related to NRC efforts using the Peach Bottom model in NUREG-2206, which provided the technical basis for the containment protection and release reduction rulemaking for boiling water reactors with Mark I and Mark II containments. This report documents the input model changes from the NUREG/CR-7155 study and performs a small number of reference calculations to assess the changes of the new computer code and the model input updates. The objective of the work is to verify whether the updated Peach Bottom MELCOR model and updated version of MELCOR support the conclusions formed in the Peach Bottom SOARCA UA by performing these representative calculations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Detection and Perception of Sound by Eagles and Surrogate Raptors

One overarching objective of this program of study was the accumulation of objective, scientifically valid information relating to auditory performance of bald and golden eagles that may be used to guide the development of acoustic alerting/deterrence technologies intended to discourage encroachment into wind energy air spaces. To that end, analyses aimed at the characterization of sensitivity to sound in bald and golden eagles, along with findings in the supra-threshold, dynamic frequency spaces related to response latencies and amplitudes, leads us to conclude that bald, and golden eagles navigate the same basic working auditory space, as in other known and thus far characterized members of the diurnal raptor family. Specifically, bald and golden eagles, along with other raptor species within the group, operate in an auditory space characterized by a frequency band at least four octaves wide and centered on 2 kHz, with an upper frequency limit between 6 and 10 kHz at 80 dB SPL and a lower frequency limit that almost certainly extends below 0.2 kHz. Consequently, we recommend that signal designers use these data as a guideline in efforts to design effective and efficient acoustic alerting/deterrent systems. It is important to note that signal energy broadcast outside of this frequency band at moderate levels will not contribute to the efficacy of a deterrent but will add an unnecessary fraction to the overall acoustic pollution budget. The importance of this consideration is heightened by contemporaneous concerns related to the transmission of noise broadcast by wind energy farms. In addition, based on analyses of data acquired from red-tailed hawks using the same experimental paradigm and data acquisition system, we conclude that auditory function in the red-tailed hawk is sufficiently like that observed in bald and golden eagles to permit its use as a surrogate species. Response waveforms, threshold-frequency curves, and input-output characteristics match those of eagles closely. It should be noted however, that differences in sensitivity and slightly extended high-frequency limits of hearing should be taken into account when extrapolating findings from one species to the others. Although the inclusion of behavioral tests of red-tailed hawks to acoustic stimuli was beyond the scope of this investigation, future efforts to assess response parameters like signal-type preference and habituation rate will further elucidate their suitability to serve as eagle surrogates in behavioral studies; nonetheless, the species in question are well matched with respect to basic auditory performance. A second essential objective of this program of study was the acoustic characterization of a subset of calls comprising the vocal repertoires of bald and golden eagles that may be used to supplement auditory performance findings in the effort to guide the development of acoustic alerting signals. With regard to that objective, the vocal repertoires of both bald and golden eagle species are rich and varied. While similar in spectrographic structure, distinctive differences are also clear. Generally, golden eagles produce some calls with shorter durations, and similar “sounding” calls exhibit distinctively different spectrographic patterns than those of bald eagles. Both species produce calls that contain a wide variety of nonlinear elements that operate to enhance the rich and varied nature of commonly observed vocal products. Comparison of the average power spectra of commonly observed bald and golden eagle calls with threshold-frequency curves leads to the conclusion that call energies fall within the frequency bounds of hearing. Further, the acoustic energy of calls considered in this report tend to fall into overlapping, but different frequency ranges of the acoustic sensitivity curve. This condition may encourage signal designers to vary the frequency content of acoustic deterrence signals in the field. Finally, preliminary observations relating to the tendencies and proclivities of bald eagles to attend to the acoustic landscape lead to the conclusion that eagles monitor their immediate sound environment assiduously. Individuals respond to a variety of natural and synthetic sound signals reliably and, perhaps most relevant in the context of the engineering of acoustic alerting/deterrence technologies, habituation to most sounds considered in this effort was minimal. These preliminary results, while calling for extended behavioral testing, are promising and set the stage for the exportation of behavioral studies into real world scenarios.

17 WIND ENERGY↗
DOE OSTI2021

FY2020 Savannah River Site Composite Analysis Annual Summary Review

This document provides the Department of Energy (DOE) Order 435.1 and its manual, Radioactive Waste Management (DOE 2021a, 2021b) required Annual Review for the Savannah River Site (SRS) Composite Analysis (CA). Progress made to-date toward addressing the secondary issue from the LFRG review of the 2010 SRS CA has focused primarily upon inventory estimate improvements. Inventory impacts dose in a linear fashion and reduces the uncertainty with the CA conclusions. Maintenance items are addressed, as funding allows, based on the relative risk associated with meeting the performance objectives. Currently, there is minimal risk in exceeding the DOE 100 mrem/yr CA primary dose limit or the DOE 30 mrem/yr dose constraint (administrative limit). Proposed activities, discoveries, new information and changes potentially affecting the 2010 SRS CA are documented in this and earlier Annual Summary reports, and a consolidated list of changes since the 2010 CA is documented in this report. The impact to the CA of changes arising from updated performance assessment (PA) baselines [i.e., Saltstone Disposal Facility (SDF), E-Area Low-Level Waste Facility (ELLWF), and F & H Tank Farm (FTF & HTF) closures] is expected to be minor for the following reasons: The primary contributors to the SRS CA dose impact at the Upper Three Runs (UTR) point of assessment (POA) are the H-Canyon and Mixed Waste Management Facility (MWMF), contributing 68% and 9%, respectively, to the dose impact at that POA. The combined contribution to the UTR dose impact from all PA’s (SDF, ELLWF, FTF and HTF) is ~2% of this total. The 2010 SRS CA model validation performed indicates that the CA projected dose, while generally conservative, provides a reasonable representation of the maximum annual doses. Doses evaluated are well below the SRS established 15 mrem/yr administrative limit (Crapse et al. 2011). Based on the assessment presented within this annual review and collective engineering judgement, the conclusions of the 2010 SRS CA remain valid and there is reasonable assurance that SRS will meet the performance objectives delineated in DOE Manual 435.1-1. The 2010 SRS CA should be updated to incorporate PA changes, proposed changes to inventories and sources and model improvements accumulated since the 2010 CA. The timing will be dependent on the completion of the ongoing E-Area PA revision.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Blast furnace slag reactions in various solutions (Interim Report)

Blast furnace slag (BPS) is a critical component of grout formulations for the remediation of low activity nuclear waste. This interim report describes the initial results of a study designed to investigate the fundamental mechanisms of BPS dissolution. The goal of the work is to delineate the physicochemical aspects of the slag that impart beneficial properties to grout formulations to enable the consistent production of a slag-replacement material (“designer slag”) that performs better than what is commercially available. This report documents the dissolution experiments that were conducted using nine different initial solution compositions. Solution measurements for each solution, including pH and solution composition, are given for 1, 7, 14, 28, and 56 day intervals samples. Scanning electron microscopy images are presented for the 56 day samples from each of the solutions. Inferences about reaction mechanisms and 56-day mineralogy are made based on the information collected to date. Some conclusions are made based on the work performed for this interim report, and a path forward including the strategy for making stronger conclusions based on X-ray diffraction (XRD) analyses is presented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Enhancing the Useability of the IAEA's Physical Model: An Analysis of User Feedback

This study presents the results of Physical Model user interviews conducted with 12 people who have International Atomic Energy Agency (IAEA) safeguards experience. The goal of this report is to provide additional context for policy makers when prioritizing the needs of the IAEA regarding support for enhancements to the Physical Model. The interviews covered the general usability of the Physical Model, its effectiveness as a technical reference, and the scope and utility of the Physical Model's indicators and content. The key conclusions from these interviews are as follows: 1) The Physical Model is difficult to find and not well advertised. 2) The Physical Model can be difficult to use due to its format, which makes searching for information difficult, and lack of visual content. Therefore, the Physical Model should be supported in multiple formats (print, PDF, web) to maximize its usability for different stakeholders. 3) The scope of the Physical Model's content and indicators is likely sufficient, and translating indicators into other languages is unlikely to be worth the effort. 4) Despite its inefficiencies and other issues, the Physical Model in its current form is a vital (albeit under-utilized) resource for key stakeholders. 5) Despite its broad use case the Physical Model is not a catch-all tool and force-fitting the Physical Model into functions for which it has not been designed for would likely diminish its value. 6) It can be difficult to disentangle challenges related to the Physical Model and its usability from broader challenges at the Agency, such as general issues with communication and coordination. Based on these conclusions and considering the results of past studies on the Physical Model funded by NA-241, the analysis team developed a list of recommendations and associated actions for IAEA consideration. These recommendations are prioritized based on the assessed level of difficulty for the IAEA to implement a recommendation, emphasizing low hanging fruit then building to more ambitious changes to the Physical Model's format and content.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

Global Ethanol-Blended-Fuel Vehicle Compatibility Study

The objective of this study is to understand the impact of ethanol-blended fuel at various blending levels (10%, 15%, and 20% vol.) on "in-operation" vehicles built to differing emissions and manufacturing standards around the world. The study focuses on vehicles used in Canada, China, India, Indonesia, Japan, South Korea, and Mexico. Historical experience in the United States and Brazil informs the analysis. The primary study question is: Are vehicles in targeted countries physically and operationally compatible with ethanol blended fuel? For a fuel to be compatible with a vehicle, the fuel must perform its function as part of the integrated fuel-vehicle system, meaning: the car should start easily and drive normally, the fuel should not cause catastrophic fuel system leaks, the fuel should not cause corrosion or degradation of any engine or fuel system components (including emissions control components). The history of E10 use in the United States, beginning in 1978, was evaluated and shows no reliability or operability issues for cars dating back to pre-emissions-control times -- and likely included many cars manufactured in the 1960s. This strongly supports the contention that fuel chemistry and property differences between E0 and E10 are so small that any car made to international standards in the last 50 years will have a very high probability of being fully compatible with E10. This conclusion is supported by the experience in Brazil in the 1970s, where E10 was also introduced, and ethanol blending for conventional cars rapidly ramped up to even higher blend levels. A limited number of fuel system and component manufacturers supply the global market, including Bosch, Continental, Denso, Delphi, and Visteon. To reduce complexity, ethanol-compatible materials began to be integrated in fuel system designs globally. Fuel systems evolved over the following decades to incorporate ethanol-compatible materials with core subsystem families, such as in-tank fuel pumps used across several global vehicle original equipment manufacturers (OEMs). A similarly compelling case can be made that all cars at the Tier 1 (or equivalent) emissions-control technology level or higher are fully compatible with E15 blends, based on the data evaluated by the U.S. Environmental Protection Agency (EPA) and Ricardo in 2010. For cars at this technology level, the minor differences in fuel chemistry and properties between E10 and E15 are not significant. For E20, studies are not as extensive but are still highly significant. A long-term durability study conducted on mileage accumulation dynamometers presents convincing evidence that Tier 2 technology level cars have materials of construction and engine control authority for compatibility with E20, although this conclusion is not as strong as those drawn for E10 and E15, which are also partly based on real-world experience.

09 BIOMASS FUELS↗