Optimal control theory for non-scalar valued performance criteria
Infimum principle for dynamic optimal control with nonscalar valued cost criteria, rederiving Kalman-Bucy filter
Athans, M.↗
SEARCH · Search NASA
Results for “Control Theory”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of constructive existence theorems in optimal control theory Final report
Constructive existence theorems, function approximations, and computational algorithms developed for optimal control problems
Guinn, T.↗
Propulsion control and control theory: A new research focus
Technological developments necessary for the implementation of advanced digital control concepts for aircraft propulsion are identified and discussed. Developments associated with the replacement analog controllers with digital control systems, sensors and actuators, and control modes and software are reported.
Zeller, J. R.↗
Constrained modes in control theory - Transmission zeros of uniform beams
Mathematical arguments are presented demonstrating that the well-established control system concept of the transmission zero is very closely related to the structural concept of the constrained mode. It is shown that the transmission zeros of a flexible structure form a set of constrained natural frequencies for it, with the constraints depending explicitly on the locations and the types of sensors and actuators used for control. Based on this formulation, an algorithm is derived and used to produce dimensionless plots of the zero of a uniform beam with a compatible sensor/actuator pair.
Williams, T.↗
A manual control theory analysis of vertical situation displays for STOL aircraft
Pilot-vehicle-display systems theory is applied to the analysis of proposed vertical situation displays for manual control in approach-to-landing of a STOL aircraft. The effects of display variables on pilot workload and on total closed-loop system performance was calculated using an optimal-control model for the human operator. The steep approach of an augmentor wing jet STOL aircraft was analyzed. Both random turbulence and mean-wind shears were considered. Linearized perturbation equations were used to describe longitudinal and lateral dynamics of the aircraft. The basic display configuration was one that abstracted the essential status information (including glide-slope and localizer errors) of an EADI display. Proposed flight director displays for both longitudinal and lateral control were also investigated.
Baron, S.↗
Optimal control theory (OWEM) applied to a helicopter in the hover and approach phase
A major difficulty in the practical application of linear-quadratic regulator theory is how to choose the weighting matrices in quadratic cost functions. The control system design with optimal weighting matrices was applied to a helicopter in the hover and approach phase. The weighting matrices were calculated to extremize the closed loop total system damping subject to constraints on the determinants. The extremization is really a minimization of the effects of disturbances, and interpreted as a compromise between the generalized system accuracy and the generalized system response speed. The trade-off between the accuracy and the response speed is adjusted by a single parameter, the ratio of determinants. By this approach an objective measure can be obtained for the design of a control system. The measure is to be determined by the system requirements.
Born, G. J.↗
Researches in optimal and suboptimal control theory
Regret function derived for variational methods of Pontryagin and Bellman, and its application in representation of known optimal control policies
Kang, G.↗
A control-theory model for human decision-making
A model for human decision making is an adaptation of an optimal control model for pilot/vehicle systems. The models for decision and control both contain concepts of time delay, observation noise, optimal prediction, and optimal estimation. The decision making model was intended for situations in which the human bases his decision on his estimate of the state of a linear plant. Experiments are described for the following task situations: (a) single decision tasks, (b) two-decision tasks, and (c) simultaneous manual control and decision making. Using fixed values for model parameters, single-task and two-task decision performance can be predicted to within an accuracy of 10 percent. Agreement is less good for the simultaneous decision and control situation.
Levison, W. H.↗
Research study on stabilization and control: Modern sampled-data control theory. Continuous and discrete describing function analysis of the LST system
The dynamics of the Large Space Telescope (LST) control system were studied in order to arrive at a simplified model for computer simulation without loss of accuracy. The frictional nonlinearity of the Control Moment Gyroscope (CMG) Control Loop was analyzed in a model to obtain data for the following: (1) a continuous describing function for the gimbal friction nonlinearity; (2) a describing function of the CMG nonlinearity using an analytical torque equation; and (3) the discrete describing function and function plots for CMG functional linearity. Preliminary computer simulations are shown for the simplified LST system, first without, and then with analytical torque expressions. Transfer functions of the sampled-data LST system are also described. A final computer simulation is presented which uses elements of the simplified sampled-data LST system with analytical CMG frictional torque expressions.
Kuo, B. C.↗
Status of dual control theory
Theoretical studies of decision making and stochastic processes are discussed. Several approaches are described for an improved performing control method. It is shown that control performance is highly dependent on the knowledge of the unknown parameters in the system.
Tse, E.↗
Control theory for random systems
A survey is presented of the current knowledge available for designing and predicting the effectiveness of controllers for dynamic systems which can be modeled by ordinary differential equations. A short discussion of feedback control is followed by a description of deterministic controller design and the concept of system state. The need for more realistic disturbance models led to the use of stochastic process concepts, in particular the Gauss-Markov process. A compensator controlled system, with random forcing functions, random errors in the measurements, and random initial conditions, is treated as constituting a Gauss-Markov random process; hence the mean-square behavior of the controlled system is readily predicted. As an example, a compensator is designed for a helicopter to maintain it in hover in a gusty wind over a point on the ground.
Bryson, A. E., Jr.↗
Application of modern control theory to scheduling and path-stretching maneuvers of aircraft in the near terminal area
A design concept of the dynamic control of aircraft in the near terminal area is discussed. An arbitrary set of nominal air routes, with possible multiple merging points, all leading to a single runway, is considered. The system allows for the automated determination of acceleration/deceleration of aircraft along the nominal air routes, as well as for the automated determination of path-stretching delay maneuvers. In addition to normal operating conditions, the system accommodates: (1) variable commanded separations over the outer marker to allow for takeoffs and between successive landings and (2) emergency conditions under which aircraft in distress have priority. The system design is based on a combination of three distinct optimal control problems involving a standard linear-quadratic problem, a parameter optimization problem, and a minimum-time rendezvous problem.
Athans, M.↗
Application of a postulate based control theory for an artificial arm
The biocontroller, remnant of the natural arm, and feedback elements must be considered in designing a controller for an above elbow artificial arm for amputees. This fundamental postulate is used to derive equations for developing the controller, which is shown in block diagrams.
Jacobsen, S. C.↗
An application of modern control theory to an elastic spacecraft
Results are presented to illustrate the application of established procedures of linear, quadratic, Gaussian optimal estimation and control to a spacecraft with dynamically significant elastic appendages. Interpretations are provided in both time domain and frequency domain, and conclusions are drawn for a wide class of problems of flexible spacecraft attitude control.
Larson, V.↗
Data-Driven Control: Theory and Applications
The ushering in of the big-data era, ably supported by exponential advances in computation, has provided new impetus to data-driven control in several engineering sectors. This topic's rapid and deep expansion has precipitated the need to showcase the highlights of data-driven approaches. There has been a rich history of contributions from the control systems community in data-driven control. At the same time, several new concepts and research directions have also been introduced in recent years. Many of these contributions and concepts have started to transition from theory to practical applications. This paper will overview the historical contributions and highlight recent concepts and research directions.
Soudbakhsh, Damoon↗
Two examples in the time optimal control theory of distributed parameter systems.
The behavior of hyperbolic and parabolic partial differential equations is contrasted by studying the point-to-point time-optimal control problem for the equation of heat conduction and the equation of motion of a vibrating string. A maximal principle is obtained for the time-optimal control of the one-dimensional heat equation, and it is proven that time optimal controls are weakly bang-bang. The bang-bang principle is proven to be invalid for hyperbolic equations because of the finite speed of wave propagation. In the case of boundary value control of the vibrating spring, the latter is demonstrated by deriving an explicit formula for the time optimal control.
Quinn, J. P.↗
Helicopter trajectory planning using optimal control theory
A methodology for optimal trajectory planning, useful in the nap-of-the-earth guidance of helicopters, is presented. This approach uses an adjoint-control transformation along with a one-dimensional search scheme for generating the optimal trajectories. In addition to being useful for helicopter nap-of-the-earth guidance, the trajectory planning solution is of interest in several other contexts, such as robotic vehicle guidance and terrain-following guidance for cruise missiles and aircraft. A distinguishing feature of the present research is that the terrain constraint and the threat envelopes are incorporated in the equations of motion. Second-order necessary conditions are examined.
Menon, P. K. A.↗
Rough-Wall Channel Analysis Using Suboptimal Control Theory
The original aim of this work was to shed some light on the physics of turbulence over rough walls using large-eddy simulations and the suboptimal-control wall boundary conditions introduced by Nicoud et al. It was hoped that, if that algorithm was used to fit the mean velocity profile of the simulations to that of a rough-walled channel, instead of to a smooth one, the wall stresses introduced by the control algorithm would give some indication of what aspects of rough walls are most responsible for the modification of the flow in real turbulence. It was similarly expected that the structure of the resulting velocity fluctuations would share some of the characteristics of rough-walled flows, thus again suggesting what is intrinsic and what is accidental in the effect of geometric wall roughness. A secondary goal was to study the effect of 'unphysical' boundary conditions on the outside flow by observing how a relatively major change of the target velocity profile, and therefore presumably of the applied wall stresses, modifies properties such as the dominant length scales of the velocity fluctuations away from the wall. As will be seen below, this secondary goal grew more important during the course of the study, which was carried out during a short summer visit of the first two authors to the CTR. It became clear that there are open questions about the way in which the control algorithm models the boundary conditions, even for smooth walls, and that these questions make the physical interpretation of the results difficult. Considerable more work in that area seems to be needed before even relatively advanced large-eddy simulations, such as these, can be used to draw conclusions about the physics of wall-bounded turbulent flows. The numerical method is the same as in Nicoud et al. The modifications introduced in the original code are briefly described in section 2, but the original paper should be consulted for a full description of the algorithm. The results are presented in section 3 and summarized in section 4. The elementary properties of turbulence over rough walls which are used in the text have been taken from recent reviews such as Raupach et al. or Jimenez.
Flores, O.↗