Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conversion residue”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Influence of gasoline fuel formulation on lean autoignition in a mixed-mode-combustion (deflagration/autoignition) engine

We report stoichiometric spark-ignition engines suffer efficiency penalties due to throttling losses at low loads, a low specific-heat ratio of the stoichiometric working fluid, and limits on compression ratio due to end-gas autoignition leading to undesirable knocking. Mixed-Mode Combustion (MMC) mitigates these shortcomings by using a lean working fluid where a spark-initiated pilot-stabilized deflagrative flame front is followed by controlled end-gas autoignition. This MMC study investigates the effects of initial conditions (intake air temperature, intake pressure, equivalence ratio, and intake oxygen fraction) on autoignition tendency of four gasoline-range fuels with varying properties and composition. The use of fuels with varying octane sensitivity (S) allowed exploring the importance of low-temperature heat release in triggering autoignition. Fuels with high S were less reactive for conditions that promote low-temperature chemistry (operation at high intake air pressure or without N2 dilution). Conversely, an Alkylate fuel with low S showed a greater autoignition resistance at operating conditions that were unfavorable for low-temperature chemistry. Next, the effect of residual gas composition on autoignition tendency of fuels was examined with a chemical-kinetics model. Among the various molecules in the residual gas, nitric oxide (NO) enhanced the low-temperature chemistry and increased the autoignition tendency most significantly. The fuels’ autoignition response to increasing NO amount corroborates the experimental observations. Next, the sequential autoignition of the end-gas was assessed to be less impacted by thermal stratification because of lean mixtures showing relatively less low-temperature chemistry, when compared to stoichiometric mixtures. Next, the effect of changing equivalence ratio on the autoignition was found to be similar for all fuels, regardless of their S. With changing intake air temperature, the response of fuels’ autoignition tendency depended on the dilution level used. At high dilution (i.e. low intake [O2]), fuels’ reactivity increased with increasing intake air temperature. In contrast, for operation without dilution, the autoignition tendency of the low-S Alkylate fuel decreased with increasing intake air temperature, while that of high-S High Cycloalkane fuel still increased with increasing intake air temperature. In conclusion, conventional octane metrics (RON and MON) have utility in assessing the autoignition tendency under lean MMC operation. Moreover, the fuel requirements for MMC align with that of stoichiometric operation: i.e., high RON and high S fuels are desirable for stable non-knocking operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of low-chemical storage pretreatment of loblolly pine bark on biochar from microwave pyrolysis

Forest product residues such as bark represent a low-cost, abundant feedstock for bioenergy, but their high ash and alkali and alkaline earth metal (AAEM) content limit thermochemical conversion efficiency. This study evaluates the use of low-severity chemical pretreatments during anaerobic storage to improve the performance of microwave pyrolysis for loblolly pine bark. Bark was treated with dilute sulfuric acid (0.1% and 1%, w/w) or sodium hydroxide (4%, w/w) and incubated anaerobically for one or two weeks to simulate in-pile biorefinery storage. The most effective treatment—1% H2SO4 for two weeks—reduced AAEM content by 35.7% and increased bio-oil yield by 11% compared to untreated controls, while also reducing pyrolysis gas production. In contrast, alkali treatment did not reduce AAEM levels and led to decreased bio-oil yields with increased gas formation. Although biochar yields were relatively stable across treatments, their physicochemical characteristics varied significantly. Acid-treated bark yielded biochars with higher carbon content, lower O/C and H/C ratios, greater surface area, and enhanced heating values. These improvements suggest that chemical pretreatment during storage can tailor biochar quality for specific end uses. Biochars produced under optimized conditions exhibited properties suitable for soil amendment, carbon sequestration, and solid fuel applications. This integrated approach—combining storage, mild chemical conditioning, and microwave pyrolysis—provides a viable pathway to enhance the value and sustainability of bark-derived bioenergy products.

09 - BIOMASS FUELS↗
DOE OSTI2024

Demystifying In Situ Pyrolysis Chemistry for High-Performance Polyanionic Cathodes in Sodium-Ion Batteries

In this article, the carbon coating strategy has emerged as an indispensable approach to improve the conductivity of polyanionic cathodes. However, owing to the complex reaction process between precursors of carbon and cathode, establishing a unified screening principle for carbonaceous precursors remains a technical challenge. Herein, we reveal that carbonaceous precursor pyrolysis chemistry undeniably influences the formation process and performance of Na 3 V 2 (PO 4 ) 3 (NVP) cathodes from in situ insights. By investigating three types of carbonaceous precursors, it is found that O/H-containing functional groups can provide more bonding sites for cathode precursors and generate a reducing atmosphere by pyrolysis, which is beneficial to the formation of polyanionic materials and a uniform carbon coating layer. Conversely, excessive pyrolysis of functional groups leads to a significant amount of gas, which is detrimental to the compactness of the carbon layer. Furthermore, the substantial presence of residual heteroatoms diminishes graphitization. In this case, it is demonstrated that carbon dots (CDs) precursors with suitable functional groups can comprehensively enhance the Na+ migration rate, reversibility, and interface stability of the cathode material. As a result, the NVP/CDs cathode displays outstanding capacity retention, maintaining 92% after 10,000 cycles at a high rate of 50 C. Altogether, these findings provide a valuable benchmark for carbon source selection for polyanionic cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Data for Remote Stereocontrol with Azaarenes via Enzymatic Hydrogen Atom Transfer

Strategies for achieving asymmetric catalysis with azaarenes have traditionally fallen short of accomplishing remote stereocontrol, which would greatly enhance accessibility to distinct azaarenes with remote chiral centres. The primary obstacle to achieving superior enantioselectivity for remote stereocontrol has been the inherent rigidity of the azaarene ring structure. Here we introduce an ene-reductase system capable of modulating the enantioselectivity of remote carbon-centred radicals on azaarenes through a mechanism of chiral hydrogen atom transfer. This photoenzymatic process effectively directs prochiral radical centres located more than six chemical bonds, or over 6 Å, from the nitrogen atom in azaarenes, thereby enabling the production of a broad array of azaarenes possessing a remote γ-stereocentre. Results from our integrated computational and experimental investigations underscore that the hydrogen bonding and steric effects of key amino acid residues are important for achieving such high stereoselectivities.

Catalysis↗
DOE OSTI2024

Formation of uranium oxy-carbide and uranium carbide via conversion of polymer covered uranium dioxide by laser-based thermal processing

Conventional formation of carbonaceous uranium compounds requires bulk processing using furnace-based approaches. Here, a methodology employing polymer covered uranium dioxide and laser-based heating is explored to enable rapid, localized formation of carbonaceous uranium compounds. Specifically, heating of poly(methyl methacrylate) covered uranium dioxide powder to high temperatures using laser irradiation in argon and methane gaseous environments was investigated. Decomposition of material and reactions induced by laser irradiation were probed in situ by residual gas analysis using a benchtop mass spectrometer. In this study, to determine the effect on the resultant material phase, three different process parameters were varied: gaseous atmosphere, laser power, and laser irradiation time. Material processed under varying conditions was analyzed using powder X-ray diffraction and scanning electron microscopy. This work realized the conversion of uranium dioxide into uranium oxy-carbide(s) and uranium carbide(s) phases, at over 60 wt.%, via the polymer surface application and laser-based thermal decomposition methodology.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Binding and Translocation of Substrate Allosterically Promotes Functional Interactions Within the AlkB–AlkG Electron Transfer Complex

The alkane monooxygenase AlkB and rubredoxin AlkG form an electron transfer complex that hydroxylates terminal alkanes to produce alcohols. The recent cryoEM study of Fontimonas thermophila AlkB-AlkG complex revealed its architecture, including a dodecane (D12) substrate at the active site. However, FtAlkBG molecular mechanism of action of remains unknown. Here, in this study, we examined its dynamics and interactions by multiscale computations, including molecular dynamics simulations, elastic network models, and QM/MM of the oxygen activation mechanism at the AlkB catalytic site. D12 maintained stable interactions within the catalytic site during two MD runs, coordinated by hydrophobic residues L263-L264, I267, I133. A third extended run revealed that D12 could translocate to a membrane-exposed site near S49/F46 along a hydrophobic channel gated by I54. During this translocation, D12 was temporarily stabilized at intermediate sites IS1 (lined by I27/L30-G31/G50/L53-I54/P59/S124/A127-V128) and IS2 (I33-G34/L37/L45-F46/S49) before nearly exiting the protein, and diffused back to the active site, assisted by L30. Substrate binding and translocation across those intermediate sites affects the coupling between the iron centers in AlkBG, and interfacial interactions between AlkB-AlkG. The channel was further connected to the cytosol, near two surface-exposed arginines, potentially allowing for O 2 passage. The allosteric effects between D12 putative entry site, catalytic site and AlkB-AlkG interface were analyzed by ENM-based methods which confirmed the cooperative perturbation-responses and strongly correlated movements of residues belonging to those distal regions. Our study provides new mechanistic insights into key sites and their interactions that could be targeted for developing AlkB-variants with desirable alkane conversion functions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Comparative life cycle assessment of woody biomass processing: air classification, drying, and size reduction powered by bioelectricity versus grid electricity

Sulfur accumulation during biofuel production is pollutive and toxic to conversion catalysts and causes the premature breakdown of processing equipment. Air classification is an effective preprocessing technology for ash and sulfur reduction from biomass feedstocks. Here, a life cycle assessment (LCA) sought to understand the environmental impact of implementing air classification as a sulfur-mitigation technique to improve feedstock quality for pine residues using a grid electricity scenario (GES) versus a bioelectricity scenario (BES). Global warming potential (GWP) for preprocessing was simulated using inventory databases embedded in SimaPro and the Argonne National Laboratory’s GREET model, specifically focusing on comparing the GWP of a GES versus a BES. Overall, the GES had a GWP impact over seven times that of the BES (136 versus 18 kg CO 2 equivalent per tonne of usable feedstock), with steam generation during rotary drying accounting for 57% of the GES’s GWP. Air classification represents 0.4% and 1.6% of the total GWP impact for the GES and BES, respectively. Therefore, air classification can facilitate a 30% reduction in feedstock sulfur content to improve feedstock quality for biofuel conversion and lessen corrosion of equipment while contributing minimal GWP impact during preprocessing.

Air classification↗
DOE OSTI2020

Response of Pseudomonas putida to Complex, Aromatic-Rich Fractions from Biomass

There is strong interest in the valorization of lignin to produce valuable products; however, its structural complexity has been a conversion bottleneck. Chemical pretreatment liberates lignin-derived soluble fractions that may be upgraded by bioconversion. Here, cholinium ionic liquid pretreatment of sorghum produced soluble, aromatic-rich fractions that were converted by Pseudomonas putida (P. putida), a promising host for aromatic bioconversion. Growth studies and mutational analysis demonstrated that P. putida growth on these fractions was dependent on aromatic monomers but unknown factors also contributed. Proteomic and metabolomic analyses indicated that these unknown factors were amino acids and residual ionic liquid; the oligomeric aromatic fraction derived from lignin was not converted. A cholinium catabolic pathway was identified, and the deletion of the pathway stopped the ability of P. putida to grow on cholinium ionic liquid. This work demonstrates that aromatic-rich fractions obtained through pretreatment contain multiple substrates; conversion strategies should account for this complexity.

09 BIOMASS FUELS↗
DOE OSTI2020

Investigation of a Lignin-Based Deep Eutectic Solvent Using p -Hydroxybenzoic Acid for Efficient Woody Biomass Conversion

Deep eutectic solvents (DESs) are effective solvents for biomass conversion and have been proposed as alternatives to ionic liquids (ILs). In this paper, we first report an effective pretreatment of woody biomass using a novel hardwood lignin-based DES prepared from p -hydroxybenzoic acid (PB) and choline chloride (ChCl), which are used as the hydrogen bond donor and acceptor, respectively. The impacts of the ChCl-PB DES on structural properties and enzymatic hydrolysis of poplar wood were comprehensively evaluated. The performance of ChCl-PB DES was also compared with two other DESs with p -coumaric acid (PCA) and 4-hydroxybenzaldehyde (PHA) as the hydrogen bond donors, which have been successfully applied to herbaceous biomass conversion in previous studies. The results showed that hemicellulose and lignin were effectively fractionated during the proposed ChCl-PB DES pretreatment under a relatively mild temperature. The ChCl-PB DES pretreatment resulted in up to 69% of delignification, and the pretreated poplar residues had over 90% of glucose yield by a 72 h-enzymatic hydrolysis. Transformation of poplar biomass during the DES pretreatment was evaluated by gel permeation chromatography (GPC), two-dimensional heteronuclear single quantum coherence (2D-HSQC), and 31 P nuclear magnetic resonance (NMR) spectroscopies. The recovered lignin showed relatively high purity, narrow molecular weight distribution (PDI < 1.6), and relatively low molecular weight (~1400 g/mol for M w ). A sustainable process was achieved by recycling DES as well as the utilization of PB, which is a producible aromatic compound from hardwood lignin, for the proposed DES formation in the system. This study indicates that the proposed novel DES with a hardwood lignin-based PB compound is a promising pretreatment solvent to achieve an economically feasible biomass conversion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Counterflow Virtual Impactor (CVI) Inlet Aboard Aircraft (INLETCVI-AIR) Instrument Handbook

The counterflow virtual impactor (CVI) inlet separates out and samples cloud elements via inertial impaction. Warm, dry, particle-free carrier gas of known composition is pumped to the tip of the inlet in the direction opposite of the flow of air. The flow lines of the incoming free stream air are split. Larger droplets and ice crystals suspended in the sample air have enough inertia to penetrate the counterflow and enter the sample flow, while smaller, unactivated particles follow the streamlines of the air flowing around the inlet’s tip (Noone et al. 1988). The instrument is capable of sampling cloud elements as a function of cut size by changing the velocity of counterflow at the probe tip. The CVI cut size is usually defined as a diameter of a smallest particle for which penetration rate is 50%. For the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facilityGulfstream-159 aircraft’s CVI inlet, that value is usually around 13 microns. The dry heated air, normally used as the carrier gas, also serves to evaporate water from the hydrometeor, leaving the residuals to be sampled by in-cabin aerosol instrumentation. The number concentration of the droplet residue in the CVI sample line is usually increased with respect to corresponding cloud element number concentration. The CVI performance as a concentrator is usually described via CVI enhancement factor, which is a conversion factor between ambient volumetric concentration (not adjusted to standard temperature and pressure) and volumetric concentration in the CVI sample line.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Insights into Mechanisms of Screw Feeder Plugging by Heated Pine Forestry Residues Using in-situ and Correlative Microscopy

Increasing concerns about global carbon emissions due to fossil fuel use has created interest in renewable fuel alternatives, such as lignocellulosic biomass. With an estimated global biomass production probability ten-fold higher than projected need, functionalizing and scaling biomass conversion processes, like pyrolysis, is a promising component of a diverse sustainable energy program (Kan, Strezov, & Evans, 2016). Pyrolysis reactors employed in biomass conversion often encounter the known problem of screw feeder plugging, halting work and reducing efficiency of biorefineries. Although the screw feeder is not heated directly, conductive heat transfer from the fluidized bed pyrolysis reactor creates a temperature gradient, where particles experience temperatures between 22°C and 500°C from the time they enter the feeder to being emptied into the reactor (Digman, Joo, & Kim, 2009; Nieminen & Folke, 1982). The impact of unintentional heating on this highly variable feedstock may result in particle morphology modification, surface texture transformation, and the evolution of viscous compounds and may contribute to screw feeder plugging (Haas, Nimlos, & Donohoe, 2009; Ingram et al., 2008). We hypothesized that particles of various anatomical fractions (including needles, branches, bark, cambium, and whitewood) will experience dramatic changes during this heating regime, which will be characterized by decreased particle size, increased surface roughness, degradation of key structural macromolecules, and generation of viscous compounds that would result in increased particle friction and cohesion, contributing to screw feeder plugging.

biofuels↗
DOE OSTI2024

SRNL High and Low Activity Residue Characterization System Phase II [Poster]

The characterization system contains data sampled from 1996 to 2024 and can display any desired combination of 45 different isotopes. This system is intended to be used to quickly access historical data, generate trends for accurate future projections, and evaluate relevant unit conversion calculations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Rhamnogalacturonan I is a recalcitrant pectin domain during Clostridium thermocellum -mediated deconstruction of switchgrass biomass

Background Liquid fuels from lignocellulosic feedstocks are required for transition to a sustainable bioeconomy. However, the recalcitrance of carbon-containing feedstock cell walls to deconstruction poses a barrier to cost effective biological conversion of plant biomass to biofuels. One-step consolidated bioprocessing (CBP) in which anaerobic thermophilic bacteria convert lignocellulosic biomass into liquid fuels is a platform for overcoming the recalcitrance of plant biomass. Results The amounts of hemicellulosic and pectic polysaccharides, two complex cell wall glycans that contribute to plant biomass recalcitrance and that are partially solubilized during CBP of switchgrass aerial biomass by Clostridium thermocellum were evaluated in the liquor, solid residues and residue washate recovered during a 120-h CBP process. After 120 h, 24% of milled switchgrass was solubilized in the C. thermocellum CBP platform. Higher concentrations of arabinose, xylose, galactose, and glucose accumulated in the CBP-fermentation liquor and washate compared to fermentation controls without C. thermocellum, indicating that C. thermocellum solubilized hemicelluloses, but did not fully metabolize them. After five days of fermentation, the relative amount of rhamnose in the solid residues increased by 16% compared to controls, and CBP solid residues had more than 23% increased reactivity against RG-I reactive monoclonal antibodies, indicating that the pectic polymer rhamnogalacturonan I (RG-I) was not effectively solubilized from switchgrass biomass by C. thermocellum CBP. Similarly, the amount of mannose (Man) in the CBP solid residues increased by 7% and reactivity against galactomannan reactive antibodies increased by greater than 14%, indicating that the hemicellulosic polymer galactomannan was also resistant to degradation by C. thermocellum during CBP fermentation. Conclusions These findings show that C. thermocellum is unable to effectively degrade RG-I pectic and galactomannan hemicellulosic components in switchgrass biomass. Targeting these polymers for improved solubilization could enhance the efficiency of conversion of grass biomass to biofuels.

09 BIOMASS FUELS↗
DOE OSTI2026

Demonstrating a butylamine-based deconstruction method for poplar biomass and conversion by diverse microbial strains

Low-boiling alkylamines such as butylamine offer promise as effective biomass pretreatment solvents that can be readily recovered and recycled; however, their capability to support microbial conversion of nutrients present in hydrolysates represents an important area for investigation. Here we employed butylamine to pretreat poplar biomass and characterize its effects on the release of fermentable sugars after solvent removal and enzymatic hydrolysis, as well as the biocompatibility of the produced hydrolysates with three organisms commonly used as bioconversion hosts. We observed that residual butylamine and the derivative butylacetamide were present in high enough concentrations to exert toxicity to strains of Aspergillus niger, Pseudomonas putida, and Rhodosporidium toruloides that produce malic acid, isoprenol and bisabolene, respectively. Removal of the toxic compounds by charcoal filtration and nutrient supplementation resulted in a hydrolysate containing >100 g L −1 of sugars that enabled strong growth, substrate consumption and bioproduct accumulation, outperforming defined cultivation media. This is the first demonstration of a butylamine-based deconstruction process for poplar biomass at a pilot-scale to achieve conversion of high sugar concentrations to valuable bioproducts with engineered microbes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Direct Air Capture and Sequestration of CO 2 by Accelerated Indirect Aqueous Mineral Carbonation under Ambient Conditions

Mineralization of gaseous carbon dioxide into solid carbonates using alkaline industrial residues such as coal fly ash has a dual advantage of reducing the carbon dioxide footprint of coal power plants and improving ash utilization. However, the slow mineral carbonation rate under atmospheric conditions is a major challenge, especially when using natural minerals or industrial residues for direct air capture (DAC) of CO 2 . In this study, using coal fly ash samples and concentrated alkali carbonate aqueous solutions as a recyclable solvent, we show the feasibility of coupling mineral carbonation with DAC under atmospheric conditions. Findings show that carbonation efficiency is best under alkaline conditions, achieving as high as ~80% conversion to calcium carbonates within 1 h in a 1.9 M sodium carbonate solution. Based on the experimental results, a process coupling DAC and mineral carbonation that operates entirely under ambient conditions is proposed. Here, the techno-economic and life cycle assessments for the proposed process project a levelized cost of $\$116$–133/t-CO 2 -sequestered (US $\$2019$) and process carbon emissions (GWP) in the range of 0.03–0.25 t-CO 2 e/t-CO 2 -sequestered. Considering the low cost, simplicity, and gigaton-scale sequestration potential, we believe that DAC based on alkaline industrial residue carbonation can be considered a “low-hanging fruit” in the pursuit of negative emissions to combat climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Moving from residual lignocellulosic biomass into high–value products: Outcomes from a long–term international cooperation

Major progress in the bioprocessing of lignocellulose to fuels and value-added chemicals has created the possibility of a low carbon-footprint economy. However, the current complexity and associated costs of lignocellulose conversion result in a higher price for ethanol than for fossil fuels. The cost of cellulosic ethanol production will be lowered by further progress in development of biorefinery technology that produces both ethanol and high-value chemicals with bio-based products that are beginning to penetrate consumer markets in the USA, Brazil, and worldwide. The cost-effectiveness of low carbon-footprint bioproducts will benefit from advances in supplying large amounts of biomass solids to the biorefinery. We describe here outcomes from a successful long-term international cooperation between the Laboratory of Renewable Resources Engineering (LORRE) at Purdue University in the United States and Brazil's Agricultural Research Corporation (EMBRAPA) and Federal University of Sâo Carlos (UFSCar), which has contributed practical pathways to enhance the biorefinery concept. Furthermore, this paper gives an overview of developments that address fundamental knowledge of lignocellulosic biomass pretreatment hydrolysis under optimized operational conditions and bioreactor configurations, and the science and engineering that contributes to the effective production of fuel and ethanol and value-added products from biomass.

09 BIOMASS FUELS↗
DOE OSTI2026

Feedstock/Pretreatment Screening for Bioconversion of Sugars and Lignin Residues

This project will conduct biomass deconstruction (pretreatment and enzymatic saccharification) on two representative biomass feedstocks and four different pretreatment processes, including three high temperature steam/chemical pretreatments and one low temperature chemical/mechanical pretreatment. A third biomass feedstock will undergo biomass deconstruction with three different pretreatment processes, including two high temperature chemical pretreatments and one low temperature chemical/mechanical pretreatment. Several pretreatment conditions will be performed in a screening study using NLR pilot-scale pretreatment equipment to generate a range of pretreated biomass substrates. A selected number of these substrates will be chosen for enzymatic saccharification evaluation, based on standard compositional analysis of the pretreated substrates as a primary indicator of pretreatment efficacy. Resulting enzymatic hydrolysis slurries will be analyzed to determine overall biomass sugar yields. Additional compositional analysis will be performed to determine oligomeric sugar composition and structure, to analyze structural characteristics of solids fractions on native, pretreated, and enzymatically saccharified biomass residues for one of the biomass feedstocks, corn stover. The enzymatically saccharified materials will undergo 2,3-butanediol fermentation in a shaker flask as bench scale. Using relevant process performance data collected in these various conversion steps, technoeconomic analysis activities will be performed to compare the economic potential of the various biomass feedstock and pretreatment processes and to identify key economic drivers and sustainability metrics.

09 BIOMASS FUELS↗