Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Mean flow characteristics for the oblique impingement of an axisymmetric jet

The oblique impingement of an axisymmetric jet has been investigated. A summary of the data and the analytical interpretations of the dominant mechanisms which influence the flow are reported. The major characteristics of the shallow angle oblique jet impingement flow field are: (1) minimal dynamic spreading as revealed by the surface pressure field, (2) pronounced kinematic spreading as revealed by the jet flow velocity field, (3) a pronounced upstream shift of the stagnation point from the maximum pressure point, (4) the production of streamwise vorticity by the impingement process.

Foss, J. F.↗
NASA NTRS1976

The VORCOM. Part 1: Analytical considerations

The analytical considerations which support the computation of (1) two components of the velocity vector from an X-array and (2) the transverse vorticity from the X-array and an adjacent parallel wire pair are presented. The electronic circuit which will execute these computations at a 50 khz rate is also described. The factors limiting the accuracy of the measurements are identified and quantitative estimates are given for a typical x-probe. An extensive analysis of the factors which effect the output and which are unknown (or unknowable) during the measurements is presented. Quantitative estimates of these effects are developed in the form of an uncertainty analysis. Numerical values, calculated using the analytical structure of the response equations, are tabulated; other estimates which require special experiments are described.

Foss, J. F.↗
NASA NTRS1976

Assessment of Variable-cycle Engines for Mach 2.7 Supersonic Transports

Three proposed SCAR propulsion systems in terms of aircraft range for a fixed payload and take-off gross weight with a design cruise Mach number 2.7 are evaluated. The effects of various noise and operational restraints are determined and sensitivities to some of the more important performance variables are presented for the most probable design noise and operational restraint case. Critical areas requiring new or improved technology for each cycle are delineated.

Morris, S. J.↗
NASA NTRS1977

Preliminary study of tug-glider freight systems utilizing a Boeing 747 as the tug

Performance of the tug-glider system was severely limited by ground run. In most cases studied, additional engines were necessary. Except at short ranges for which additional payload were carried in the tow plane, the productivity of the basic aircraft was degraded by a reduction in cruise speed necessitated by the glider drag. Excessive aspect ratios did not improve system performance because of the increase in glider wing weight. Powered gliders using a tow plane only for takeoff and climb had the potential for a major reduction in fuel consumption. Uncertainty of restrictive regulatory action and the apparently increased airborne investment per unit productivity are obstacles to commercial development.

Heyson, H. H.↗
NASA NTRS1977

The effects of the laminar/turbulent boundary layer states on the development of a plane mixing layer

The effect of the laminar/turbulent boundary layer state on the mean and rms velocities of a developing plane mixing layer was investigated. The use of commonly accepted nondimensional representations of the data confirm (at least) an approximately self-preserving condition. It is suggested that the effects of the laminar/turbulent initial condition persist in the self-preserving region.

Foss, J. F.↗
NASA NTRS1977

The effects of the laminar/turbulent boundary layer states on the development of a plane mixing layer

The effect, of the laminar/turbulent boundary layer state on the mean and rms velocities of a developing plane mixing layer, has been investigated. The maximum Ux/nu allowed by the facility was 6.7 x 100.000; the maximum x station surveyed corresponds to approximately 2000 and 700 initial momentum thicknesses for the laminar and turbulent cases respectively. The use of commonly accepted non-dimensional representations of the data confirm (at least) an approximately self-preserving condition. They also suggest that the effects of the laminar/turbulent initial condition persist in the self-preserving region. A direct comparison of the data reveals that the persistence so observed is illusory. An interpretation of the reason for this misunderstanding is advanced.

Foss, J. F.↗
NASA NTRS1978

Trade Studies Relating to a Long Range Mach 2.6 Supercruiser

A systems study was conducted on an aircraft concept, representative of a supersonic-cruise military aircraft (supercruiser). The study results indicate that supersonic ranges in excess of 4000 n.mi. at a Mach number of 2.62 are possible with a 500 lbf class aircraft. Trade studies, to determine the sensitivity of supersonic range to parameters which would improve maneuverability, indicate that thrust-weight ratios of as much as 0.5 can be used without significantly decreasing supersonic range; however, increasing the thrust-weight ratio to 1.0 decreases the range capability by about 1100 n.mi. The range penalty for increasing the aircraft limit load-factor from 4.0 to 9.0 is about 500 n.mi. The increased fuel volume of several configurations improved the supersonic range capability by about 1200 n.mi. but, due to associated losses in supersonic L/D, had an insignificant effect on the range at a Mach number of 2.62.

Foss, W. E., Jr.↗
NASA NTRS1978

Measurements in a large angle oblique jet impingement flow

The flow field associated with the oblique impingement of an axisymmetric jet was investigated in the externally blown flap configuration for the STOL aircraft. The passive and active spreading characteristics of the shallow angle (a greater than or = approximately to 15 degrees) oblique impingement flow, the role of the initially azimuthal vorticity field, and the stagnation point region were studied, and compared to the large ( a = 45 degres) oblique jet impingement flow. A description of the characteristics of the large angle impingement flow is presented: A flow field near the plate as showing two distinct patterns, one near the location of the maximum surface pressure, and another about the geometric intersection of the jet axis with the plate; and turbulence in the region above the plate which is greater than the one accounted for by the convection of turbulence energy by the mean motion.

Foss, J. F.↗
NASA NTRS1979

A computer program for detailed analysis of the takeoff and approach performance capabilities of transport category aircraft

The takeoff and approach performance of an aircraft is calculated in accordance with the airworthiness standards of the Federal Aviation Regulations. The aircraft and flight constraints are represented in sufficient detail to permit realistic sensitivity studies in terms of either configuration modifications or changes in operational procedures. The program may be used to investigate advanced operational procedures for noise alleviation such as programmed throttle and flap controls. Extensive profile time history data are generated and are placed on an interface file which can be input directly to the NASA aircraft noise prediction program (ANOPP).

Foss, W. E., Jr.↗
NASA NTRS1979

Transverse vorticity measurements

A technique, involving programmed digital calculations, is proposed for evaluating transverse vorticity in typical laboratory shear flows from an array of four hot-wire probes. The computing scheme successfully recovers the velocity vector information from a wide range of velocity magnitudes and a wide range of pitch angles. It is readily implemented in a batch process mode on a digital computer.

Foss, J. F.↗
NASA NTRS1980

Conceptual study of an advanced supersonic technology transport (AST-107) for transpacific range using low-bypass-ratio turbofan engines

An advanced supersonic technology configuration concept designated the AST-107, using a low bypass ratio turbofan engine, is described and analyzed. The aircraft had provisions for 273 passengers arranged five abreast. The cruise Mach number was 2.62. The mission range for the AST-107 was 8.48 Mm (4576 n.mi.) and an average lift drag ratio of 9.15 during cruise was achieved. The available lateral control was not sufficient for the required 15.4 m/s (30 kt) crosswind landing condition, and a crosswind landing gear or a significant reduction in dihedral effect would be necessary to meet this requirement. The lowest computed noise levels, including a mechanical suppressor noise reduction of 3 EPNdB at the flyover and sideline monitoring stations, were 110.3 EPNdB (sideline noise), 113.1 EPNdB (centerline noise) and 110.5 EPNdB (approach noise).

Morris, S. J., Jr.↗
NASA NTRS1981

A computer technique for detailed analysis of mission radius and maneuverability characteristics of fighter aircraft

A computer technique to determine the mission radius and maneuverability characteristics of combat aircraft was developed. The technique was used to determine critical operational requirements and the areas in which research programs would be expected to yield the most beneficial results. In turn, the results of research efforts were evaluated in terms of aircraft performance on selected mission segments and for complete mission profiles. Extensive use of the technique in evaluation studies indicates that the calculated performance is essentially the same as that obtained by the proprietary programs in use throughout the aircraft industry.

Foss, W. E., Jr.↗
NASA NTRS1984

The Mission Radius and Maneuverability Characteristics of Fighter Aircraft

Computer program provides detailed analysis of mission radius and maneuverability characteristics of combat aircraft. Program combination of five mission modules representing mission profiles currently of interest. Each mission Module designed to determine combat radius or range capability for specific mission with associated ground rules and profile definitions.

Foss, W. E.., Jr.↗
NASA NTRS1984

Takeoff and Landing of Transport Aircraft

Computer program provides detailed analysis of takeoff and landing performance capabilities of transport-category aircraft. Performance calculated according to airworthiness standards of Federal Aviation Regulations. Program used to investigate advanced takeoff procedures for noise alleviation, such as programed throttle and control flaps.

Foss, W. E.., Jr.↗
NASA NTRS1983

Advanced techniques for transverse vorticity measurements

A four wire array of probes is used to determine the velocity components, their derivatives, and the transverse vorticity in a small (approximately 1 x 1 mm) spatial domain. The algorithms that define this calculation scheme and the extended considerations: compensating for minor calibration changes, uncertainty considerations, and the determination of excessive pitch angles in the data set, are presented.

Foss, J. F.↗
NASA NTRS1984

Free stream turbulence and density ratio effects on the interaction region of a jet in a cross flow

Jets of low temperature air are introduced into the aft sections of gas turbine combustors for the purpose of cooling the high temperature gases and quenching the combustion reactions. Research studies, motivated by this complex flow field, have been executed by introducing a heated jet into the cross stream of a wind tunnel. The investigation by Kamotani and Greber stands as a prime example of such investigations and it serves as the principal reference for the present study. The low disturbance level of the cross stream, in their study and in similar research investigations, is compatible with an interest in identifying the basic features of this flow field. The influence of the prototypes' strongly disturbed cross flow is not, however, made apparent in these prior investigations.

Wark, C. E.↗
NASA NTRS1984

Development and analysis of a STOL supersonic cruise fighter concept

The application of advanced and emerging technologies to a fighter aircraft concept is described. The twin-boom fighter (TBF-1) relies on a two dimensional vectoring/reversing nozzle to provide STOL performance while also achieving efficient long range supersonic cruise. A key feature is that the propulsion package is placed so that the nozzle hinge line is near the aircraft center-of-gravity to allow large vector angles and, thus, provide large values of direct lift while minimizing the moments to be trimmed. The configurations name is derived from the long twin booms extending aft of the engine to the twin vertical tails which have a single horizontal tail mounted atop and between them. Technologies utilized were an advanced engine (1985 state-of-the-art), superplastic formed/diffusion bonded titanium structure, advanced controls/avionics/displays, supersonic wing design, and conformal weapons carriage. The integration of advanced technologies into this concept indicate that large gains in takeoff and landing performance, maneuver, acceleration, supersonic cruise speed, and range can be acieved relative to current fighter concepts.

Dollyhigh, S. M.↗