Search NASA⌕ Search

SEARCH · Search NASA

Results for “G MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Effects of a noncoplanar biphenyldiamine on the processing and properties of addition polyimides

Addition curing polyimides, prepared from noncoplanar 2,2'-bis(trifluoromethyl) 4,4' diaminobiphenyl (BTDB) with various dianhydrides were evaluated as high temperature polymer matrix materials. T sub g of these polymers were measured by mechanical methods as well as by thermal mechanical analysis. Physical and mechanical properties as well as the thermo-oxidative stability of neat resins and the corresponding G40-600 graphite fiber reinforced composites were compared to that of PMR-II-50 and V-CAP-75.

Chuang, Kathy C.↗

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel.

epoxy matrix composites↗

Effect of n-HA content on the isothermal crystallization, morphology and mechanical property of n-HA/PLGA composites

Graphical abstract: Effect of n-HA content on the isothermal crystallization, morphology and mechanical property of n-HA/PLGA composites was studied in details. The results showed that the addition of higher content of g-n-HA was favorable to promote the crystallization better in g-n-HA/PLGA composites, but it could also cause more agglomeration in PLGA matrix, as a result of worse mechanical properties, and the addition content of 3 wt% g-n-HA to PLGA matrix was an appropriate proportion, which had the highest bending strength among these g-n-HA/PLGA composites, and it might be potential to be used in biomedical fields in future. Highlights: ► The effect of n-HA content on the n-HA/PLGA composites was studied in detail. ► Isothermal crystallization, microstructure and mechanical property were studied. ► The relation between n-HA content and properties of n-HA/PLGA composite was found. ► An appropriate proportion of n-HA in n-HA/PLGA composite was obtained. - Abstract: A serials of g-n-HA/PLGA composites with surface-modified g-n-HA of 1%, 3%, 6%, 10% and 15% in weight were prepared by solution mixing. The isothermal crystallization, morphology and mechanical property of g-n-HA/PLGA composites were investigated by differential scanning calorimeter (DSC), scanning electron microscope (SEM) and electromechanical universal tester. The results showed that Avrami equation was suitable for describing the isothermal crystallization process in this system, and the crystallization rate of g-n-HA/PLGA composites containing more than 3 wt% g-n-HA was basically accord with the relational expression of T{sub 110} {sub °C} > T{sub 105°C} > T{sub 115°C} > T{sub 120°C}. Moreover, at the same Tc, crystallization rate was greatly enhanced with the increasing of g-n-HA acting as nucleate. However, the addition of higher content of g-n-HA would cause more agglomeration in PLGA matrix, so that the mechanical properties of g-n-HA/PLGA composites would gradually decrease. In conclusion, the addition of higher content of g-n-HA was favorable to promote the crystallization better in g-n-HA/PLGA composites, but it could also cause more agglomeration in PLGA matrix, result in worse mechanical properties, and the addition content of 3 wt% g-n-HA to PLGA matrix was an appropriate proportion, which had the highest bending strength among these g-n-HA/PLGA composites, and it might be potential to be used in biomedical fields in future.

36 MATERIALS SCIENCE↗

Stability of matrix equations arising in electromagnetics

Many problems in electromagnetics can be formulated as a Fredholm equation of the first kind. In these problems it is desired to determine some function f(x) from its integral transform g(y). Except for special cases for which an explicit inverse operator is known, the equation is usually discretized by the method of moments into a matrix equation Af = g, which is then solved on a computer. A method of calculating the sensitivity of the solution of Af = g due to errors in either the vector g or the matrix A is developed. The usefulness of this method is demonstrated with problems from antenna theory, scattering theory, and remote sensing.

Klein, C.↗

Quasiparticle conductance in spin valve Josephson structures

We study the quasiparticle current in clean ferromagnetic Josephson structures of the form $S_1/F_1/N/F_2/S_2$, where $\textit{S, F,}$ and $\textit{N}$ denote superconducting, ferromagnetic, or normal layers, respectively. Our focus is on the structure of the conductance $\textit{G}$ as a function of bias $\textit{V$, emphasizing the subgap region. We use a fully self-consistent numerical method, coupled to a transfer matrix procedure to extract $\textit{G(V)}$. We choose material parameters appropriate to experimentally realized Co Cu Nb structures. In this work, we find a resonance peak structure as a function of the intermediate layer thickness and of the misalignment angle $\phi$ between $\textit{F}$ layers. To understand this resonance structure, we develop an approximate analytic method. For experimentally relevant thicknesses, the conductance has multiple subgap peaks, which oscillate in position between low and critical bias positions. These oscillations occur in both $\phi$ and the layer thicknesses. We compare our results with those obtained for the spin valve structures ($F_1/N/F_2/S_2$) and discuss the implications of our results for the fabrication of spin Josephson devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crossing resonance of wave fields in a medium with an inhomogeneous coupling parameter

The dynamic susceptibilities (Green’s functions) of the system of two coupled wave fields of different physical natures in a medium with an arbitrary relation between the mean value ɛ and rms fluctuation Δɛ of the coupling parameter have been examined. The self-consistent approximation involving all diagrams with noncrossing correlation lines has been developed for the case where the initial Green’s function of the homogeneous medium describes the system of coupled wave fields. The analysis has been performed for spin and elastic waves. Expressions have been obtained for the diagonal elements G{sub mm} and G{sub uu} of the matrix Green’s function, which describe spin and elastic waves in the case of magnetic and elastic excitations, and for the off-diagonal elements G{sub mu} and G{sub um}, which describe these waves in the case of cross excitation. Change in the forms of these elements has been numerically studied for the case of one-dimensional inhomogeneities with an increase in Δɛ and with a decrease in ɛ under the condition that the sum of the squares of these quantities is conserved: two peaks in the frequency dependences of imaginary parts of G{sub mm} and G{sub uu} are broadened and then joined into one broad peak; a fine structure appears in the form of narrow resonance at the vertex of the Green’s function of one wave field and narrow antiresonance at the vertex of the Green’s function of the other field; peaks of the fine structure are broadened and then disappear with an increase in the correlation wavenumber of the inhomogeneities of the coupling parameter; and the amplitudes of the off-diagonal elements vanish in the limit ɛ → 0.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous spin splitting of electrons in type-II InSb quantum dots in InAs

Magnetooptical studies of heterostructures with type-II InSb quantum dots in the InAs matrix grown by molecular beam epitaxy are carried out. Unusual behavior of magnetophotoluminescence from quantum dots measured in the Faraday geometry in the samples with multiple planes of quantum dots is found. Specifically, the peak with {sigma}{sup -} polarization, which corresponds to transitions of electrons with s = +1/2, has a higher energy than the {sigma}{sup +} peak corresponding to s = -1/2, which contradicts the negative value of the electron g factor both in the InAs matrix and in the InSb quantum dot. The effect can be interpreted as the result of competition of two channels of radiative recombination, which differ by the initial states of electrons belonging either to the InSb quantum dots or to shallow-level donors in the InAs matrix.

36 MATERIALS SCIENCE↗

Ionization of highly charged relativistic ions by neutral atoms and ions

Ionization of highly charged relativistic ions by neutral atoms and ions is considered. Numerical results of recently developed computer codes based on the plane-wave Born and the equivalent-photon approximations are presented and compared with experimental data available at relativistic energies for 1s electron ionization. New formulas for relativistic cross sections are derived for ionization of the projectile electron with arbitrary quantum numbers n and l. The results are obtained on the basis of the nonrelativistic reduction in the Dirac matrix element.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electroluminescence from completely horizontally oriented dye molecules

A complete horizontal molecular orientation of a linear-shaped thermally activated delayed fluorescent guest emitter 2,6-bis(4-(10Hphenoxazin-10-yl)phenyl)benzo[1,2-d:5,4-d′] bis(oxazole) (cis-BOX2) was obtained in a glassy host matrix by vapor deposition. The orientational order of cis-BOX2 depended on the combination of deposition temperature and the type of host matrix. Complete horizontal orientation was obtained when a thin film with cis-BOX2 doped in a 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP) host matrix was fabricated at 200 K. The ultimate orientation of guest molecules originates from not only the kinetic relaxation but also the kinetic stability of the deposited guest molecules on the film surface during film growth. Utilizing the ultimate orientation, a highly efficient organic light-emitting diode with the external quantum efficiency of 33.4 ± 2.0% was realized. The thermal stability of the horizontal orientation of cis-BOX2 was governed by the glass transition temperature (T{sub g}) of the CBP host matrix; the horizontal orientation was stable unless the film was annealed above T{sub g}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, structure and magnetic properties of La{sub 3}Co{sub 2}SbO{sub 9}: A double perovskite with competing antiferromagnetic and ferromagnetic interactions

The synthesis, structural characterization, and magnetic properties of La{sub 3}Co{sub 2}SbO{sub 9} double perovskite are reported. The crystal structure has been refined by X-ray and neutron powder diffraction data in the monoclinic space group P2{sub 1}/n. Co{sup 2+} and Sb{sup 5+} have the maximum order allowed for the La{sub 3}Co{sub 2}SbO{sub 9} stoichiometry. Rietveld refinements of powder neutron diffraction data show that at room temperature the cell parameters are a=5.6274(2) A, b=5.6842(2) A, c=7.9748(2) A and {beta}=89.999(3) Degree-Sign . Magnetization measurements indicate the presence of ferromagnetic correlations with T{sub C}=55 K attributed to the exchange interactions for non-linear Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} paths. The effective magnetic moment obtained experimentally is {mu}{sub exp}=4.38 {mu}{sub B} (per mol Co{sup 2+}), between the theoretical one for spin only (3.87 {mu}{sub B}) and spin-orbit value (6.63 {mu}{sub B}), indicating partially unquenched contribution. The low magnetization value at high magnetic field and low temperature (1 {mu}{sub B}/f.u., 5 T and 5 K) and the difference between ZFC and FC magnetization curves (at 5 kOe) indicate that the ferromagnetism do not reach a long range order and that the material has an important magnetic frustration. - Graphical abstract: Co-O-Co (Yellow octahedra only) rich zones (antiferromagnetic) are in contact with Co-O-Sb-O-Co (Red and yellow octahedra) rich zones (Ferromagnetic) to give the peculiar magnetic properties, as a consequence, a complex hysteresis loop can be observed composed by a main and irreversible curve in all the measured range, superimposed with a ferromagnetic component at low fields. Highlights: Black-Right-Pointing-Pointer La{sub 3}Co{sub 2}SbO{sub 9} has small Goldschmidt Tolerance Factor (t) due to the small size of La{sup 3+}. Black-Right-Pointing-Pointer Small t determines an angle for the path Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} of 153 Degree-Sign . Black-Right-Pointing-Pointer Ferromagnetism is attributed to exchange interactions for Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} paths. Black-Right-Pointing-Pointer Ferromagnetic nanoclusters are embedded in an antiferromagnetic matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-qubit decoherence mechanisms revealed via quantum process tomography

We analyze the quantum process tomography (QPT) in the presence of decoherence, focusing on distinguishing local and nonlocal decoherence mechanisms for a two-partite system from experimental QPT data. In particular, we consider the {radical}(iSWAP) gate realized with superconducting phase qubits and calculate the QPT matrix {chi} in the presence of several local and nonlocal decoherence processes. We determine specific patterns of these decoherence processes, which can be used for a fast identification of the main decoherence mechanisms from an experimental {chi} matrix.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fatigue damage of notched boron/epoxy laminates under constant amplitude loading

Fatigue damage in (0, + or - 45) and (0, + or - 45,90) boron/epoxy laminates was studied with X-ray radiography and scanning electron microscopy. In addition, limited tests for residual strength and stiffness were performed. The results of this study suggest that in boron/epoxy laminates the 45-degree plies play a key role in the fatigue process of boron/epoxy laminates that contain them. The fatigue process in the + or - 45-degree plies starts as intralaminar matrix cracks.

Roderick, G. L.↗

Addressable inverter matrix for process and device characterization

The addressable inverter matrix consists of 222 inverters each accessible with the aid of a shift register. The structure has proven useful in characterizing the variability of inverter transfer curves and in diagnosing processing faults. For good 3-micron CMOS bulk inverters investigated, the percent standard deviation of the inverter threshold voltage was less than one percent and the inverter gain (the slope of the inverter transfer curve at the inverter threshold vltage) was less than 3 percent. The average noise margin for the inverters was near 2 volts for a power supply voltage of 5 volts. The specific faults studied included undersize pull-down transistor widths and various open contacts in the matrix.

Buehler, M. G.↗

Addressable inverter matrix for process and device characterization

The addressable inverter matrix consists of 222 inverters each accessible with the aid of a shift register. The structure has proven useful in characterizing the variability of inverter transfer curves and in diagnosing processing faults. For good 3-micron CMOS bulk inverters investigated in this study, the percent standard deviation of the inverter threshold voltage was less than one percent and the inverter gain (the slope of the inverter transfer curve at the inverter threshold voltage) was less than 3 percent. The average noise margin for the inverters was near 2 volts for a power supply voltage of 5 volts. The specific faults studied included undersize pull-down transistor widths and various open contacts in the matrix.

Buehler, M. G.↗