Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gauge function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Lunar Plant Experiment: Testing Plant Germination in Lunar Gravity and Ionizing Radiation

We present an open design for a first plant growth module on the Moon (LPX). The primary science goal of lunar habitat is to investigate germination and initial plant growth when subject to the combined effects of lunar gravity and lunar surface radiation. The LPX module has been designed to be a flexible base unit that can be adapted to fly to the lunar surface on a variety of landers and rovers. LPX has size and shape of a 1 Unit CubeSat (10 centimeters on a side) and a total mass of 0.3 kilograms. The base will contain a seed module holding around 50 Arabidopsis seeds and provide approximately 0.5 liters of normal air at standard pressure. By the action of a small pump, water will be released after landing to initiate germination. Images will document the germination, initial growth, phototropism, and circumnutation of the small plants while sunlight remains available. A CO2 sensor tracks the release of CO2 during germination and the subsequent uptake of CO2 by photosynthesis. Simulations indicate that the CO2 peak level will be an increase by 2250 parts per million after 2 earth-days and then decline to about 1000 parts per million after 7 earth-days. The camera and CO2 sensor interfaces are USB. The water pump initiation requires a 5-volt signal. After initiation of germination by the addition of water, the habitat must be maintained above 22 degrees Centigrade to allow for plant growth and below 27 degrees Centigrade to prevent damage to the plants. This relatively tight temperature tolerance will require thermal control systems using reflecting surfaces and insulation that must be specifically designed for each lander or rover. The plant growth unit will function to tilt angles of 20 degrees along any axis. Total image data volume required to gauge the plant growth rate and leaf area is 1 megabyte (minimum data required) to 40 megabytes (preferred data). The lid of the habitat will allow adequate sunlight for plant growth. To provide for optimum growth, light levels in the plant growth stage need to be between 75 and 150 micromoles per meter squared per second interval.

first plant growth↗
DOE OSTI2025

Transition from weak to strong coupling in thermal gauge theories: Lessons from 𝒩 = 4 SYM theory

We investigate the transition between weak and strong coupling in thermal 𝒩 =4 supersymmetric Yang-Mills theory as a function of ’t Hooft coupling 𝜆 for several quantities of phenomenological interest for which next-to-leading order calculations are available in both regimes. We use Padé approximants to interpolate between the weak and strong coupling expansions and determine the location and width of the transition between the asymptotic regimes.

Gauge Theories↗
DOE OSTI2025

Elastomeric Nanocomposite with Solvent‐Free, One Step, In Situ Shear Exfoliation of Graphite to Graphene

A graphene nanoflake (GNF)‐enhanced elastomeric nanocomposite (G‐EMC) is fabricated following an innovative, cost‐effective, single‐step, in situ shear exfoliation (ISE) method from low‐cost bulk material, graphite, where uniform mixing happens simultaneously within the elastomer matrix. Electron microscopy, atomic force microscopy, and photo‐induced force microscopy results show good dispersion of GNFs with exfoliation to a few layers and uniform distribution in the elastomer matrix. X‐ray photoelectron spectroscopy analysis shows less than 1% oxygen‐containing functional groups/impurity, enhanced bonding through the formation of edge sites as fracture occurs across the GNF basal plane, and pi‐pi interactions with newly exfoliated planar basal plane surfaces of the GNFs. Raman spectroscopy results confirm the formation of GNFs with only a few layers of graphene formed by the ISE process. Fabricated 10 wt.% G‐EMC nanocomposites show a 400%–500% increase in strength and fracture toughness. And 35 wt.% G‐EMCs provide an electrical conductivity of 25.64 S m −1 and a sensor gauge factor of 45. The resulting intrinsic piezo resistivity of the fabricated nanocomposite has been exploited to fabricate a multi‐functional wired and wireless sensor for detecting different body movements, speech, human vital functions, solvents, and biomolecules.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Perturbative quantum evolution of the gravitational state and dressing in general backgrounds

This paper sets up a perturbative treatment of the evolving quantum state of a gravitational system, in a Schrödinger-like picture, working about a general background. This connects gauge symmetry, the constraints, gravitational dressing, and evolution. Starting with a general time slicing, we give a simple derivation of the relation between the constraints, the Hamiltonian, and its well-known boundary term. Among different approaches to quantization with constraints, we focus on a “gauge-invariant canonical quantization,” which is developed perturbatively in the gravitational coupling. The leading-order solution of the constraints (including the Wheeler-DeWitt equation) for perturbations about the background is given in terms of an explicit construction of gravitational dressings built using certain generalized Green’s functions; different such dressings corresponding to adding propagating gravitational waves to a particular solution of the constraints. Dressed operators commute with the constraints, expressing their gauge invariance, and have an algebraic structure differing significantly from the undressed operators of the underlying field theory. These operators can act on the vacuum to create dressed states, and evolution of general such states is then generated by the boundary Hamiltonian, and alternately may be characterized using other relational observables. This provides a concrete approach to studying perturbative time evolution, including the leading gravitational backreaction, of quantum states of black holes with flat or anti–de-Sitter asymptotics, for example on horizon-crossing slices. This description of evolution in turn provides a starting point for investigating possibly important corrections to quantum evolution, that go beyond quantized general relativity. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Optimal Geometry for Focused Ion Beam-Milled Samples for Direct-Pull Micro-Tensile Testing Performed In Situ in a Scanning Electron Microscope

A thorough procedure was developed to efficiently manufacture dogbone samples using focused ion beam (FIB) milling for micro-tensile testing. A Bruker PI 89 PicoIndenter, Billerica, MA, USA, was used as a case study, although the analysis and results are applicable to other micro-mechanical testing systems capable of mounting a standard, Ø12.7 mm × Ø3.2 mm pin, scanning electron microscopy (SEM) pin stub (Ted Pella, Redding, CA, USA). Nine dogbones were made from an Fe-45Cu alloy additively manufactured using powder-fed laser-directed energy deposition (DED-LB). Testing showed that fracture was confined to the gauge section for all dogbones and that the fracture mode, ductile vs. brittle, was entirely dependent on the grain orientation relative to the loading direction. The analysis showed that the measured plastic strain to failure can vary from >11% (optimal geometry) to <1% (non-optimal geometry) in micro-tensile testing of high-tensile-strength (>1 GPa) metallic materials. Subsequently, a finite element analysis (FEA) was conducted to identify the improved dogbone geometries. A total of ten thousand dogbone geometries were tested, and their dimensions were defined by a set of four adjustable parameters (corner radius, load surface angle, load surface length, and dogbone head length). The gauge width and gauge length were fixed to 4 µm and 10 µm, respectively. Three-dimensional surface plots of the stress concentration as a function of two parameters were used to identify the optimal ranges of parameter values. The addition of maximum width and length constraints, measuring 25 µm and 30 µm, respectively, allowed us to identify an optimal geometry at load surface angles of 30° and 45°. Their respective dimensions (corner radius, load surface length, and dogbone head length) are, in µm, 12, 6, and 7 and 10, 7, and 7. Testing these two optimal geometries with a range of gauge lengths from 4 to 20 µm showed that smaller gauge lengths only slightly reduced the detrimental stress concentration outside the gauge section. However, smaller gauge lengths will notably improve the FIB surface polishing step as tapering is reduced with smaller dogbone lengths.

Chemistry↗
NASA NTRS2018

An Efficient Inverse Finite Element Method for Shape and Stress Sensing of Laminated Composite and Sandwich Plates and Shells

The inverse Finite Element Method (iFEM) is a revolutionary methodology for real-time reconstruction of full-field structural displacements and stresses in structures that are instrumented with strain sensors. This inverse problem is commonly referred to as shape and stress sensing, which is well-recognized as an enabling technology for structural health monitoring systems. In this study, an improved iFEM formulation is proposed for shape and stress sensing of laminated composite and sandwich plates and shells. The formulation includes the kinematics of a shear deformation plate theory known as Refined Zigzag Theory (RZT) as its baseline. The present iFEM formulation is based upon the minimization of a weighted-least-squares functional that uses the complete set of section strains of RZT. The improved iFEM methodology is applicable for shape and stress sensing of thin and moderately thick plate and shell structures involving a relatively small number of strain gauges. The main advantage of the current formulation is that highly accurate through-the-thickness distributions of displacements, strains, and stresses are attainable using an element based on simple C0-continuous displacement interpolation functions. A three-node inverseshell element, named i3-RZT, is developed. Two example problems are examined in detail: (1) a simply supported rectangular laminated composite plate and (2) a wedge structure with a hole near one of the clamped ends. For both problems, the experimental strain data are generated numerically by the direct finite element analysis using high-fidelity discretizations. These strains are then regarded as the experimental strains obtained from surface mounted strain gauges or embedded fiber Bragg grating (FBG) sensors. The numerical results demonstrate the superior capability and potential applicability of the i3- RZT/iFEM methodology for performing accurate shape and stress sensing of complex composite structures.

Kefal, Adnan↗
DOE OSTI2024

Entanglement entropy of (2 +1)-dimensional SU(2) lattice gauge theory on plaquette chains

We study the entanglement entropy of Hamiltonian SU(2) lattice gauge theory in 2 +1 dimensions on linear plaquette chains and show that the entanglement entropies of both ground and excited states follow Page curves. The transition of the subsystem size dependence of the entanglement entropy from the area law for the ground state to the volume law for highly excited states is found to be described by a universal crossover function. Quantum many-body scars in the middle of the spectrum, which are present in the electric flux truncated Hilbert space, where the gauge theory can be mapped onto an Ising model, disappear when higher electric field representations are included in the Hilbert space basis. This suggests the continuum (2+1)-dimensional SU(2) gauge theory does not have such scarred states.

Astronomy & Astrophysics↗
NASA NTRS1968

Ultrahigh vacuum measuring ionization gauge

The ionization gage described consists of separate ionization and collector regions connected at an exit area with a modulator electrode. In addition to the standard modulation function, the modulator in this location yields a suprising increase in collector current, apparently due to improved focussing and extraction of ions from the ionization region.

Brock, F. J.↗
DOE OSTI2024

Moments of parton distribution functions of any order from lattice QCD

We describe a procedure to determine moments of parton distribution functions of any order in lattice quantum chromodynamics (QCD). The procedure is based on the gradient flow for fermion and gauge fields. The flowed matrix elements of twist-2 operators renormalize multiplicatively, and the matching with the physical matrix elements can be obtained using continuum symmetries and the irreducible representations of Euclidean 4-dimensional rotations. We calculate the matching coefficients at one-loop in perturbation theory for moments of any order in the flavor nonsinglet case. We also give specific examples of operators that could be used in lattice QCD computations. It turns out that it is possible to choose operators with identical Lorentz indices and still have a multiplicative matching. One can thus use twist-2 operators exclusively with temporal indices, thus substantially improving the signal-to-noise ratio in the computation of the hadronic matrix elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2010

Incorporation of SemiSpan SuperSonic Transport (S4T) Aeroservoelastic Models into SAREC-ASV Simulation

The Simulink-based Simulation Architecture for Evaluating Controls for Aerospace Vehicles (SAREC-ASV) was modified to incorporate linear models representing aeroservoelastic characteristics of the SemiSpan SuperSonic Transport (S4T) wind-tunnel model. The S4T planform is for a Technology Concept Aircraft (TCA) design from the 1990s. The model has three control surfaces and is instrumented with accelerometers and strain gauges. Control laws developed for wind-tunnel testing for Ride Quality Enhancement, Gust Load Alleviation, and Flutter Suppression System functions were implemented in the simulation. The simulation models open- and closed-loop response to turbulence and to control excitation. It provides time histories for closed-loop stable conditions above the open-loop flutter boundary. The simulation is useful for assessing the potential impact of closed-loop control rate and position saturation. It also provides a means to assess fidelity of system identification procedures by providing time histories for a known plant model, with and without unmeasured turbulence as a disturbance. Sets of linear models representing different Mach number and dynamic pressure conditions were implemented as MATLAB Linear Time Invariant (LTI) objects. Configuration changes were implemented by selecting which LTI object to use in a Simulink template block. A limited comparison of simulation versus wind-tunnel results is shown.

Christhilf, David M.↗
DOE OSTI2025

Network analysis of memristive device circuits: dynamics, stability and correlations

Abstract Networks with memristive devices are a potential basis for the next generation of computing devices. They are also an important model system for basic science, from modeling nanoscale conductivity to providing insight into the information-processing of neurons. The resistance in a memristive device depends on the history of the applied bias and thus displays a type of memory. The interplay of this memory with the dynamic properties of the network can give rise to new behavior, offering many fascinating theoretical challenges. But methods to analyze general memristive circuits are not well described in the literature. In this paper we develop a general circuit analysis for networks that combine memristive devices alongside resistors, capacitors and inductors and under various types of control. We derive equations of motion for the memory parameters of these circuits and describe the conditions for which a network should display properties characteristic of a resonator system. For the case of a purely memresistive network, we derive Lyapunov functions, which can be used to study the stability of the network dynamics. Surprisingly, analysis of the Lyapunov functions show that these circuits do not always have a stable equilibrium in the case of nonlinear resistance and window functions. The Lyapunov function allows us to study circuit invariances, wherein different circuits give rise to similar equations of motion, which manifest through a gauge freedom and node permutations. Finally, we identify the relation between the graph Laplacian and the operators governing the dynamics of memristor networks operators, and we use these tools to study the correlations between distant memristive devices through the effective resistance.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Consistent electroweak phenomenology of a nearly degenerate Z ′ boson

Extracting constraints on the kinetic mixing of a new U ( 1 ) ′ gauge boson hiding under the Standard Model Z boson resonance requires the formalism of non-Hermitian two-point correlation functions at 1-loop order. We derive self-consistent collider constraints on Z ′ bosons with kinetic mixing in a narrow mass window around the Z boson, considering both model-independent and model-dependent bounds. Our treatment elucidates the importance of both avoided level crossing and the dispersive seesaw effect in interpreting the existing constraints. We also discuss the implications for future measurements on the Z -pole. Published by the American Physical Society 2025

Lo Chiatto, Prisco (ORCID:000000024177557X)↗
DOE OSTI2024

A Particle-in-Cell Method for Plasmas with a Generalized Momentum Formulation, Part II: Enforcing the Lorenz Gauge Condition

In a previous paper Christlieb et al. (A particle-in-cell method for plasmas with a generalized momentum formulation, part I: Model formulation, 2024), we developed a new particle-in-cell (PIC) method for the relativistic Vlasov–Maxwell system in which the electromagnetic fields and the equations of motion for the particles were cast in terms of scalar and vector potentials through a Hamiltonian formulation. This new method evolved the potentials under the Lorenz gauge using integral equation methods. New methods to construct spatial derivatives of the potentials that converge at the same rates as the fields were also presented. The new particle method was compared against standard explicit discretizations, including the well-known FDTD-PIC method, for a range of applications involving sheaths and particle beams. Here, this paper extends this new class of methods by focusing on the enforcement the Lorenz gauge condition in both exact and approximate forms using co-located meshes. A time-consistency property of the proposed field solver for the vector potential form of Maxwell’s equations is established, which is shown to preserve the equivalence between the semi-discrete Lorenz gauge condition and the analogous semi-discrete continuity equation. Using this property, we present three methods to enforce a semi-discrete gauge condition. The first method introduces an update for the continuity equation that is consistent with the discretization of the Lorenz gauge condition. Both the finite difference and spectral implementations satisfy this discrete gauge condition to machine precision. The second approach we propose enforces a semi-discrete continuity equation using the boundary integral solution to the field equations. The potential benefit of this approach is that it eliminates spatial derivatives that appear on the particle data, namely the current density, which is often calculated by linear combinations of low-order spline basis functions. This method is ideally suited to boundary integral equation methods that invert multi-dimensional operators without dimensional splitting techniques and will be the subject of future work. The third approach introduces a gauge correcting method that makes direct use of the gauge condition to modify the scalar potential and uses local maps for both the charge and current densities. This results in a gauge error, as the maps do not enforce the continuity equation. The vector potential coming from the current density is taken to be exact, and using the Lorenz gauge, we compute a correction to the scalar potential that makes the two potentials satisfy the gauge condition. This method also enforces the gauge condition to machine precision. We demonstrate two of the proposed methods in the context of periodic domains. Problems defined on bounded domains, including those with complex geometric features remain an ongoing effort. However, this work shows that it is possible to design computationally efficient methods that can effectively enforce the Lorenz gauge condition in a non-staggered PIC formulation.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2007

Radio Frequency Mass Gauging of Propellants

A combined experimental and computer simulation effort was conducted to measure radio frequency (RF) tank resonance modes in a dewar partially filled with liquid oxygen, and compare the measurements with numerical simulations. The goal of the effort was to demonstrate that computer simulations of a tank's electromagnetic eigenmodes can be used to accurately predict ground-based measurements, thereby providing a computational tool for predicting tank modes in a low-gravity environment. Matching the measured resonant frequencies of several tank modes with computer simulations can be used to gauge the amount of liquid in a tank, thus providing a possible method to gauge cryogenic propellant tanks in low-gravity. Using a handheld RF spectrum analyzer and a small antenna in a 46 liter capacity dewar for experimental measurements, we have verified that the four lowest transverse magnetic eigenmodes can be accurately predicted as a function of liquid oxygen fill level using computer simulations. The input to the computer simulations consisted of tank dimensions, and the dielectric constant of the fluid. Without using any adjustable parameters, the calculated and measured frequencies agree such that the liquid oxygen fill level was gauged to within 2 percent full scale uncertainty. These results demonstrate the utility of using electromagnetic simulations to form the basis of an RF mass gauging technology with the power to simulate tank resonance frequencies from arbitrary fluid configurations.

Zimmerli, Gregory A.↗
NASA NTRS1996

Non-contact thickness measurement using UTG

A measurement structure for determining the thickness of a specimen without mechanical contact but instead employing ultrasonic waves including an ultrasonic transducer and an ultrasonic delay line connected to the transducer by a retainer or collar. The specimen, whose thickness is to be measured, is positioned below the delay line. On the upper surface of the specimen a medium such as a drop of water is disposed which functions to couple the ultrasonic waves from the delay line to the specimen. A receiver device, which may be an ultrasonic thickness gauge, receives reflected ultrasonic waves reflected from the upper and lower surface of the specimen and determines the thickness of the specimen based on the time spacing of the reflected waves.

Bui, Hoa T.↗
DOE OSTI2025

The Nontrivial Vacuum Structure of an Extended $t\bar{t}$ BEH (Higgs) Bound State

In a recent reformulation of top-quark condensation for the Brout-Englert-Higgs boson, we introduced an extended internal wave-function, $ϕ(r)$. We show how this leads to a manifestly Lorentz invariant formalism, where the absence of ``relative time'' is a gauge invariance of the bilocal field theory. This dictates a novel and nontrivial Lorentz invariant vacuum structure for the BEH boson, the relativistic generalization of a condensed matter state such as a BCS or Bose-Einstein condensate.

Hill, Christopher T. [Fermilab; Wisconsin U., Madi↗
DOE OSTI2026

Third moments of nucleon unpolarized, polarized, and transversity parton distribution functions from physical-point lattice QCD

Using forward matrix elements of local leading-twist operators, we present a determination of the isovector third Mellin moments ⟨𝑥 2 ⟩ of nucleon unpolarized, polarized, and transversity parton distribution functions. Two lattice QCD ensembles at the physical pion mass are used, which were generated using a tree-level Symanzik-improved gauge action and 2+1 flavor tree-level improved Wilson Clover fermions coupling via 2-level HEX-smearing. Leveraging a wide set of operators, two extraction methods for the matrix elements, and the automatic inclusion of model uncertainties via bootstrapped model averages, we extract values of the third Mellin moments. Furthermore, this is the first direct calculation of these observables performed at the physical pion mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRSDate not supplied

Application of the Global Precipitation Forecast dataset for Global Landslide Forecasting System

Landslides are extremely damaging, pervasive and cause fatalities and economic impacts. Extreme rainfall events, coupled with inopportune surface conditions, are the primary triggers of landslides around the world. Forecasting landslide events represent an area of open research. A global Landslide Hazard Assessment for Situational Awareness (LHASA) model has been created that provides near real-time dynamic landslide characterization using Integrated Multi-Satellite Retrievals for Global Precipitation Mission (IMERG). However, it does not provide information on prediction of landslides into future. This study considers how global precipitation forecast data compares to satellite rainfall at different spatiotemporal scales and outlines the potential for its use in landslide hazard prediction/forecasting system. NASA Goddard Earth Observing System (GEOS)-Forecast model assimilates new observations every 6 hours, at 00, 06, 12, and 18 UTC. The GEOS-Forecast model is initialized at 00 UTC and is evaluated with IMERG Early, using Multi-Radar Multi-Sensor gauge corrected (MRMS-GC) precipitation product as a reference over contiguous United States (CONUS). Categorical and continuous statistics along with probability density functions and cumulative distribution functions are considered to assess the performance of the precipitation products, with a focus on landslide hotspots. Seasonality appears to influence the performance of both the GEOS-Forecast and IMERG Early product. Moreover, the global comparison between the GEOS-Forecast and IMERG Early is carried out in terms of percentile difference, correlation, and bias maps. For extreme rainfall events in regions such as Mekong, Colombia, and Tajikistan, GEOS-Forecast appears to resolve high rainfall relative to IMERG Early more frequently. Validation over landslide points reveal that for 24hr rainfall accumulations > 100mm, GEOS-Forecast and IMERG coincide. GEOS-Forecast and IMERG Early precipitation matches more closely for tropical cyclones than other types of storms. Overall, the performance varies with respect to location, rainfall intensities, and type of precipitation events.

Sana Khan↗