SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Frequency control system positions mirrors at either end of the laser cavity so the mirror separation is independent of thermal and acoustical fluctuations. A small portion of the laser output is split and directed upon a photodetector /photodiode/.
Holographic displays using ultrasonic vibrations or laser outputs as optical sources, discussing recording materials, responses and computer applications
Surveyor lunar landing procedures and results including instrumentation, lunar topography, selenology, chemical and physical properties, solar corona and earth laser output observations
Laser output electronic tuning by intra-cavity acousto-optic filter perturbation
Calibrator for measuring and modulating or demodulating laser outputs
Application of external and laser output mirrors to produce intensified light beam for measurement of light scattered by dispersed particles is described. Use of fiber optics bundles to collect light is discussed. Diagram of equipment and principles of operation are presented.
Device accomplishes simultaneous optical pumping using single flashlamp and electrical driver. Dye lasers require relatively low energy to operate (low-threshold pumping requirement) and provide simple method for producing simultaneous independent laser output at number of different wavelengths.
A manganese vapor laser utilizing manganese chloride as a lasant has been observed and investigated. Lasing is attained by means of two consecutive electrical discharges. The maximum laser output is obtained at a vapor pressure of about 3 torr, a temperature of 680 C, and a time delay between electrical discharges of 150 microsec. The maximum energy density is 1.3 microjoule per cu cm.
Applications in lasers for antiresonant ring interferometer include coupled laser cavities, variable laser-output coupling, intercavity harmonic-output coupling, mode locking, cavity dumping, and pulse code modulation.
By applying electric discharge, lead chloride vapor in tube is dissociated into lead and chlorine atoms. Population inversion of lead atoms is attained subsequently by second discharge, before chemical recombination of lead and chlorine has occurred. Optimum time interval between two discharges is required for maximum laser output.
An optically pumped FIR laser was constructed and tested. Optimum operating conditions were determined with CH3OH as the lasing medium. The laser was found to operate equally well with flowing gas or in a sealed off configuration. The FIR cavity stability and pump laser stability were found to have significant problems. The absorption coefficient per unit pressure of 1-1 difluoroethylene at the P(22) and P(24) lines of the 10.4 micron CO2 band was measured. The FIR line pumped by P(22) occurs at approximately 890 microns, which may be in an atmospheric transmission window. It was found that significant Stark tuning of absorption lines of methanol and 1-1 difluoroethylene can be accomplished, even at the usual 100 to 300 mTorr operating pressures of FIR lasers. This means that the use of Stark tuning may enable more effective use of pump laser output.
Absorption measurements at CO2 laser frequencies were carried out as a function of Stark fields and CH3OH gas pressures to assess the effect of low electric field Stark tuning on methanol absorption at the P(12) 9.4 micron CO2 laser line, in a continuing search for coherent emitters at submillimeter wavelengths (far infrared). The line center absorption coefficient is found to increase five-fold with a 2.3 kV/cm Stark field at the 220 mtorr methanol pressure optimal for methanol far infrared lasing. The low electric field Stark tuning encourages efforts to enhance the pumping efficiency of a methanol far infrared laser at its normal optimum operating pressure, and suggests that significant Stark field induced frequency modulation of the far IR laser output is feasible.
The first direct nuclear pumped laser using the He-2-(n,p) H-3 reaction is reported. Lasing took place on the 1.79 microns Ar I transition in a mixture of He-3-Ar at approximately 600 Torr total pressure. It was found that the electrically pulsed afterglow He-Ar laser had the same concentration profile as the nuclear pumped laser. As a result, nuclear lasing was also achieved in He-3-Xe (2.027 micron) and He-3-Kr (2.52 micron). Scaling of laser output with both thermal flux and total pressure as well as minority concentration has been completed. A peak output (He-3-Ar) of 3.7 watts has been achieved at a total pressure of 4 atm. Direct nuclear pumping of He-3-Ne has also been achieved. Nuclear pumping of a He-3-NF3 mixture was attempted, lasing in FI at approximately 7000 A, without success, although the potential lasing transitions appeared in spontaneous emission. Both NF3 and 238UF6 appear to quench spontaneous emission when they constitute more than 1% of the gas mixture.
Calculations are presented in this paper which show the amount of power that can be expected to be deposited in He-3 for typical direct nuclear-pumped lasers presently in use. The calculations were performed taking into consideration the cylindrical geometry of the system, the depletion of the thermal flux across the tube cross section, and the energy loss of the protons to the cell walls. If a laser efficiency of 1% is assumed, the results indicate a steady-state laser output of 12.5 kW from a volume of 152.6 cu cm or 82 W/cu cm can be achieved.
Nuclear pumped lasing on the neutral carbon line at 1.45 micron was achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th power sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO, and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.
Proposed opticle coupling, using lenses and mirrors that replace complex mechanical systems, can combine separate tunable diode laser outputs and expand wavelength range. Method uses single cooler housing and requires no moving parts within cooler assembly.
A tunable multiatmospheric pulsed CO2 laser with emphasis on experimental features and supporting theoretical analyses important to differential absorption lidar and Doppler lidar measurement of pollutants and wind velocities is reported. The energy deposition and the means to produce the uniform high density plasma in the multiatmospheric medium, through UV preionization of an organic seed gas is discussed. Design features of the pulsed CO2 laser are presented. The radiative processes which are operative and prevent the laser from breaking into oscillations in a large number of modes over its broad amplification bandwidth are described. The mode competition for the transient pulsed laser oscillation in a standing wave and traveling wave ring laser configuration is discussed and contrasted with the approach to steady state oscillations. The latter findings are important to transient injection locking for production of a highly stable pulsed CO2 laser output.
Nuclear pumped lasing on the neutral carbon line at 1.45 microns has been achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th n/sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 to 5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.