SEARCH · Search NASA

Results for “Multifunctional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS2011

Advanced Multifunctional MMOD Shield: Radiation Shielding Assessment

As NASA is looking to explore further into deep space, multifunctional materials are a necessity for decreasing complexity and mass. One area where multifunctional materials could be extremely beneficial is in the micrometeoroid orbital debris (MMOD) shield. A typical MMOD shield on the International Space Station (ISS) is a stuffed whipple shield consisting of multiple layers. One of those layers is the thermal blanket, or multi-layer insulation (MLI). By increasing the MMOD effectiveness of MLI blankets, while still preserving their thermal capabilities, could allow for a less massive MMOD shield. Thus, a study was conducted to evaluate concept MLI blankets for MMOD shields. In conjunction, these MLI blankets and the subsequent MMOD shields were also evaluated for their radiation shielding effectiveness towards protecting crew. These concepts were evaluated against the ISS MLI blankets and the ISS MMOD shield, which acted as the baseline. These radiation shielding assessments were performed using the high charge and energy transport software (HZETRN). This software is based on a one-dimensional formula of the Boltzmann transport equation with a straight-ahead approximation. Each configuration was evaluated against the following environments to provide a diverse view of radiation shielding effectiveness in most space environments within the heliosphere: August 1972 solar particle event, October 1989 solar particle event, 1982 galactic cosmic ray environment (during solar maximum), 1987 galactic cosmic ray environment (during solar minimum), and a low earth orbit environment in 1970 that corresponded to an altitude of 400 km and inclination of 51.6 . Both the absorbed dose and the dose equivalent were analyzed, but the focus of the discussion was on the dose equivalent since the data is most concerned with radiation shielding of the crew. The following paper outlines the evaluations performed and discusses the results and conclusions of this evaluation for radiation shielding effectiveness. Future work will focus on optimizing the radiation shielding properties for the MMOD shield. Submission

Rojdev, Kristina↗

NASA NTRS2013

Advanced Multifunctional MMOD Shield: Radiation Shielding Assessment

Rojdev, Kristina↗

NASA NTRS2013

Multifunction Habitat Workstation/OLED Development

This paper gives a general outline of both a multifunction habitat workstation and the research put into an Organic Light Emitting Diode (OLED) device. It first covers the tests that the OLED device will go through to become flight ready along with reasoning. Guidelines for building an apparatus to house the display and its components are given next, with the build of such following. The three tests the OLED goes through are presented (EMI, Thermal/Vac, Radiation) along with the data recovered. The second project of a multifunction workstation is then discussed in the same pattern. Reasoning for building such a workstation with telepresence in mind is offered. Build guidelines are presented first, with the build timeline following. Building the workstation will then be shown in great detail along with accompanying photos. Once the workstation has been discussed, the versatility of its functions are given. The paper concludes with future views and concepts that can added when the time or technology presents itself.

Schumacher, Shawn↗

NASA NTRS2016

Additive Manufacturing of Multifunctional Components Using High Density Carbon Nanotube Yarn Filaments

Additive manufacturing allows for design freedom and part complexity not currently attainable using traditional manufacturing technologies. Fused Filament Fabrication (FFF), for example, can yield novel component geometries and functionalities because the method provides a high level of control over material placement and processing conditions. This is achievable by extrusion of a preprocessed filament feedstock material along a predetermined path. However if fabrication of a multifunctional part relies only on conventional filament materials, it will require a different material for each unique functionality printed into the part. Carbon nanotubes (CNTs) are an attractive material for many applications due to their high specific strength as well as good electrical and thermal conductivity. The presence of this set of properties in a single material presents an opportunity to use one material to achieve multifunctionality in an additively manufactured part. This paper describes a recently developed method for processing continuous CNT yarn filaments into three-dimensional articles, and summarizes the mechanical, electrical, and sensing performance of the components fabricated in this way.

Gardner, John M.↗

NASA NTRS2019

Multifunctional Polymers and Composites for Aerospace Applications

System needs and challenges for commercial aviation and space exploration are constantly changing. Multifunctional materials are ideal for aerospace applications because their integration into structural components has potential to not only improve efficiency, but it can also increase payload and mission capabilities without the burden of significant additions to mass and volume. Multi-constituent materials will play an important role in enabling structures with the potential to demonstrate true multi-functionality; however, modifications to many mature polymer processing methods may be necessary. This presentation will cover multifunctional materials development efforts underway at the NASA Glenn Research Center related to formulating and characterizing novel electrical insulation for high voltage aircraft. Incorporating functionality into the reinforcement material is another materials development technique that will be discussed, which includes braiding with hybrid fibers to enhance toughness in composite structures, stitching with carbon nanotube yarns to make durable electrically conductive textiles, and treating fabrics with shear thickening fluid suspensions to produce impact-resistant inflatable habitats.

multi-functional composites↗

NASA NTRS2026

Application of Energy-efficient Electromagnetic Melt-Processing for the Upcycling of Recycled Polyphenylene Sulfide into Multifunctional Segregated Nanocomposites

Polyphenylene sulfide (PPS) is widely used in structural and functional composites because of its thermal stability, chemical resistance, and mechanical strength. As circular manufacturing becomes increasingly important, extending the service life of recycled PPS (rPPS) is essential. However, conventional high-temperature reprocessing accelerates thermo-oxidative degradation, reducing recycled composite performance. This study proposes a rapid and potentially energy-saving upcycling strategy for rPPS using electromagnetic (EM) melt-processing to form segregated carbon nanotube (CNT) networks and produce EM-responsive nanocomposites. The aim was to determine whether CNT-assisted EM heating could reduce polymer degradation while improving multifunctional properties at ultralow filler loadings. rPPS micropellets were coated with CNTs by ball milling to create conductive shells, then compacted into green bodies (GBs) and selectively melted by rapid EM irradiation. Structural, electrical, mechanical, rheological, and electromagnetic interference (EMI) shielding properties were evaluated. Electrical percolation occurred at an ultralow CNT loading of 0.08 wt%, with conductivity reaching (1.24 ± 0.74) × 10 -5 S⋅m -1 at 0.1 wt%. At this concentration, tensile strength and modulus increased by 72% and 99%, respectively. At ~ 0.7 mm thickness, X-band EMI shielding effectiveness reached 6 dB for GBs and 3 dB after EM processing. This shows that EM melt-processing upcycles rPPS into high-performance multifunctional nanocomposites with minimum thermal degradation.

recycled↗

DOE OSTI2015

Multifunctional cellulase and hemicellulase

A multifunctional polypeptide capable of hydrolyzing cellulosic materials, xylan, and mannan is disclosed. The polypeptide includes the catalytic core (cc) of Clostridium thermocellum Cthe_0797 (CelE), the cellulose-specific carbohydrate-binding module CBM3 of the cellulosome anchoring protein cohesion region (CipA) of Clostridium thermocellum (CBM3a), and a linker region interposed between the catalytic core and the cellulose-specific carbohydrate binding module. Methods of using the multifunctional polypeptide are also disclosed.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2015

Multifunctional thin film surface

A thin film with multiple binding functionality can be prepared on an electrode surface via consecutive electroreduction of two or more aryl-onium salts with different functional groups. This versatile and simple method for forming multifunctional surfaces provides an effective means for immobilization of diverse molecules at close proximities. The multifunctional thin film has applications in bioelectronics, molecular electronics, clinical diagnostics, and chemical and biological sensing.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Multifunctional microbial cellulases

Disclosed herein are methods of making multifunctional microbial cellulases. The engineered multifunctional microbial cellulases disclosed herein exhibit improved activity over native cellulases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Water oxidation by Ruthenium complexes incorporating multifunctional biipyridyl diphosphonate ligands

Here, we describe herein the synthesis and characterization of ruthenium complexes with multifunctional bipyridyl diphosphonate ligands as well as initial water oxidation studies. In these complexes, the phosphonate groups provide redox-potential leveling through charge compensation and σ donation to allow facile access to high oxidation states. These complexes display unique pH-dependent electrochemistry associated with deprotonation of the phosphonic acid groups. The position of these groups allows them to shuttle protons in and out of the catalytic site and reduce activation barriers. A mechanism for water oxidation by these catalysts is proposed on the basis of experimental results and DFT calculations. The unprecedented attack of water at a neutral six-coordinate [Ru IV ] center to yield an anionic seven-coordinate [Ru IV –OH] – intermediate is one of the key steps of a single-site mechanism in which all species are anionic or neutral. These complexes are among the fastest single-site catalysts reported to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

Fine-Tuning the Properties of Doped Multifunctional Materials by Controlled Reduction of Dopants

The physical properties of doped multifunctional compounds are commonly tuned by controlling the amount of dopants, but this control is limited because all the properties are influenced simultaneously by this single parameter. We present a strategy that enables the fine-tuning of a specific combination of properties by controlling the reduction of dopants. The feasibility of this approach was demonstrated by optimizing the near-IR photoluminescence of strontium titanate SrTiO 3 :Ni for potential applications in biomedicine for a range of absorbance in the visible/near-IR region. We discussed how material properties, such as luminescence, conductivity, or photocatalytic properties can be designed by carefully controlling the ratio of dopants in different oxidation states.

36 MATERIALS SCIENCE↗

DOE OSTI2021

ZIF-8 derived carbon materials with multifunctional selective adsorption abilities

We report a family of carbon materials (denoted SFZ8C) prepared from templated carbonization of zeolitic imidazolate framework-8 (ZIF-8) in NaCl-ZnCl 2 eutectic salt. The hard-templating effect of the salt is utilized to sustain the framework and maximize the porosity during carbonization. In addition to rich surface nitrogen and oxygen species, SFZ8Cs have large specific surface area. These combined features give rise to excellent adsorption properties for light hydrocarbon gases. SFZ8Cs have both C 2 H 2 /CO 2 selective and C 3 /C 2 selective adsorption, as well as the ability to selectively remove impurities from methane. Particularly noteworthy is the excellent C 3 /C 2 selective adsorption performance by SFZ8C-900. Its propane/ethane selectivity (7.68) is on par with the best value (7.72) reported so far, yet SFZ8C-900 excels in propane uptake capacity. Here, the multifunctional properties together with the ease for the mass production make SFZ8Cs promising for a number of important applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Polylactic acid (PLA)-based multifunctional and biodegradable nanocomposites and their applications

Polylactic acid (PLA)-based nanocomposites are emerging as multifunctional, biodegradable materials, offering sustainable alternatives to petroleum-based plastics. This review examines recent advancements in PLA nanocomposites, focusing on enhanced mechanical strength, thermal stability, and biodegradability achieved through nanofillers like metallic particles, carbon-based materials, and ceramics. Techniques such as in situ polymerization, melt mixing, and electrospinning enable application-specific improvements. PLA's limitations, including brittleness and low barrier properties, are addressed to support diverse applications: in packaging (e.g., extended shelf life), biomedicine (e.g., degradable implants), and electronics (e.g., flexible devices). Despite challenges with filler dispersion and thermal resistance, continued innovations expand PLA's potential across multiple industries, contributing to a sustainable, circular economy.

Biodegradable polymers↗

DOE OSTI2022

A systematic approach to resolve high impedance of multifunctional energy storage composites

Previous work has proposed and characterized the structural and electrical performance of Multifunctional Energy Storage Composite (MESC) structures: structural elements with embedded lithium-ion batteries which were developed by the Structures and Composite Laboratory (SACL) at Stanford University. This work conducts a comprehensive parametric study over the design variables in the manufacturing process to determine the root cause of increased DC impedance compared to commercial pouch cell batteries. Several MESC samples were assembled under various controlled environmental temperatures and pressures. The samples underwent Hybrid Peak Pulse Characterization (HPPC) to approximate the DC impedance as a function of state of charge (SOC). Failure limits of the battery with respect to assembly temperature and pressure were tested, and an MESC manufacturing simulation model was constructed in Abaqus to validate the manufacturing limits. Samples assembled without enough temperature or pressure failed due to a lack of structural integrity or hermetic seal. Conversely, samples which underwent elevated temperatures and pressures resulted in high DC impedance due to nonuniform electrolyte wetting. This work resolves the primary concern of MESC by achieving comparable DC impedance to commercial pouch cells of the same chemistry and testing procedure.

25 ENERGY STORAGE↗

DOE OSTI2022

Multifunctional Superelastic Graphene Aerogels Derived from Ambient-Dried Graphene Oxide/Camphene Emulsions

Graphene oxide (GO) emulsions have been widely adopted to fabricate lightweight graphene aerogels (GAs). However, preparing high-performance GAs from conventional GO emulsions under ambient conditions seems rather challenging because of the structural collapse caused by strong capillary forces during drying. Here, we report a new, low-cost route to prepare high-performance, multifunctional GAs by the ambient drying of GO/camphene emulsions. Benefiting from the liquid-solid and solid-gas phase transitions of camphene, highly porous GO aerogels were obtained under ambient conditions. Moreover, the thermally annealed GO aerogels exhibited excellent mechanical properties, fire resistance, thermal insulation performance, and oil adsorption capability.

ambient drying↗

NASA NTRSDate not supplied

Multifunctional Structural Materials for Sustainable Human Exploration in Extreme Space Environments

Extreme space environments such as space vacuum, radiation, jagged lunar dust, microgravity, high thermal excursion, micrometeoroids, thrust plume ejecta, seismic events, and their synergistically-adverse effects make sustainable space exploration extremely challenging. More robust and sustainable advanced materials and structures are needed to protect crew and equipment to extend space missions longer and safer with minimum service and repair needs. Recent progress of NASA efforts on sustainable multifunctional structural materials will be introduced.

Space Exploration↗

DOE OSTI2022

Unprecedented Multifunctionality in 1D Nb 1- x Ta x S 3 Transition Metal Trichalcogenide Alloy

One-dimensional (1D) van der Waals materials, such as nanofibers or nanoribbons are considered as the future ultimate limit of downscaling for modern electrical and electrochemical devices. Here, for the first time, we successfully synthesize nanofibers of a solid solution transition metal trichalcogenide (TMTC), Nb 1-x Ta x S 3 , with outstanding electrical, thermal, and electrochemical characteristics rivaling the performance of the-state-of-the art materials for each application. This material shows nearly unchanged sheet resistance (≈740 Ω/sq -1 ) versus bending cycles tested up to 90 cycles, stable sheet resistance in ambient conditions tested up to 60 days, remarkably high electrical breakdown current density of ≈ 30 MA cm -2 , strong evidence of successive charge density wave (CDW) transitions, and outstanding thermal stability up to ≈900 K. Additionally, this material demonstrates excellent activity and selectivity for CO2 conversion to CO reaching ≈ 350 mA cm -2 at – 0.8 V vs RHE with an outstanding turnover frequency number of 25 for CO formation. It also exhibits an excellent performance in a high-rate Li-air battery with the specific capacity of 3000 mAhg -1 at a high current density of 0.3 mAcm -2 . This study uncovers the multifunctionality in 1D TMTC alloys for a wide range of high-impact applications and opens a new direction for the design of the next generation of low-dimensional materials with high performance.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Multifunction Hydrophobic Ligand Engineered Cd(S, Se)/ZnS Quantum Dots for Stabilizing Highly Efficient Carbon‐Based Perovskite Solar Cells

The long-term operational stability of perovskite solar cells (PSCs) remains a key challenge impeding their commercialization, particularly due to ambient environments (e.g., moisture, oxygen, heat)-induced degradation. Carbon electrode-based PSCs have emerged as cost-effective and relatively stable alternatives to metal electrode-based devices due to carbon materials' hydrophobic behavior, yet they still lag in both long-term durability and power conversion efficiency (PCE). In this work, an ultrathin hydrophobic ligand-modified core–shell Cd(S,Se)/ZnS quantum dots (QDs) capping layer is introduced as a multifunctional interfacial modifier for carbon-electrode-based PSCs. This oleic acid ligand-modified QDs capping layer exhibits inherent hydrophobicity, effectively serving as a moisture barrier to retard perovskite degradation under ambient conditions. Furthermore, the strong interfacial bonding between the QDs and perovskite halide surfaces leads to efficient trap state passivation, reducing trap density and creating a more uniform electrical contact. The modified QDs/perovskite interface also features an elevated conduction band edge, promoting improved charge extraction. As a result, devices incorporating this quantum dot capping layer retain 98% of their initial PCE after 450 h of ambient aging and achieve a champion efficiency of 20.74%. As a result, this strategy highlights the potential of hydrophobic ligand-modified chalcogenide QDs as surface modifiers to enhance both the stability and performance of carbon-based PSCs, offering a promising route toward scalable fabrication of durable perovskite solar modules.

14 SOLAR ENERGY↗