Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nanoparticle characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

An Analysis of the Impact of Particle Growth on Transport Losses in Polymer-Electrolyte Fuel Cells

Voltage cycling causes catalyst nanoparticles in polymer-electrolyte fuel cells to grow. The concomitant loss of interfacial area results in larger kinetic, transport, and possibly ohmic overpotentials. This paper uses recently published experimental data and mathematical models to investigate the evolutions of transport and ohmic resistances to platinum nanoparticles located on the surface and inside the micropores of carbon black supports. Resistance to oxygen transport rises as surface area declines primarily because the flux to each remaining larger platinum particle increases. The path lengths governing oxygen diffusion to surface and buried platinum sites also increase as nanoparticles grow. Platinum nanoparticles on the surface become relatively less favorable as voltage cycling proceeds because they grow faster than platinum in micropores. Because voltage cycling causes total interfacial area to decline, and the fraction located inside micropores to increase, nanoscale ohmic losses increase as a catalyst layer decays. The practical importance of this effect is difficult to discern because proton conductivity in carbon micropores is not well characterized.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Online ion mobility spectrometry of nanoparticle formation by non-thermal plasma conversion of metal salts in liquid aerosol droplets

The synthesis of nanoparticles by reaction of liquid aerosol droplets containing precursors in a flow-through, atmospheric-pressure, non-thermal plasma offers a continuous, scalable, substrate- and stabilizer-free approach for direct deposition into liquids or onto soft substrates. However, the combination of multiphase and non-equilibrium chemistry makes the process complicated and poorly understood. Here, we present ion mobility spectrometry measurements of liquid water droplets containing silver nitrate passing through an atmospheric-pressure dielectric barrier discharge reactor that allows us to monitor silver nanoparticle formation online for the first time. Mobility diameter distributions were obtained with the plasma on and off, and exhibited a shift, which was related to the degree of conversion of silver nitrate. The silver nanoparticles were also collected and characterized by UV–visible absorbance spectroscopy and transmission electron microscopy to support the online measurements. Importantly, negligible conversion was found when the water was removed by a diffusion dryer, suggesting that the key reducing species are in the liquid phase, such as solvated electrons. Finally, the study demonstrates how ion mobility spectrometry measurements can be applied to provide insight into this approach to nanoparticle synthesis.

42 ENGINEERING↗
DOE OSTI2021

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co 2 Pt 3 nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H 2 , and then to O 2 at 300 °C. Irreversible segregation of Co in the Co-Pt particles was seen during redox cycling and substantial changes of the oxidation state of Co were observed. After the H 2 treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Re-oxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. Furthermore, this in situ study describes dynamical restructuring effects in CoPt nano-catalysts at the atomic scale that are crucial to understand to improve the design of catalysts used in major chemical processes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

In Situ EXAFS Study of Mo–P Bond Dynamics in Molybdenum Phosphide during CO 2 Reduction and Hydrogen Evolution

Transition Metal Phosphides (TMPs) are widely studied as catalysts in reactions like hydrogen evolution, oxygen reduction, and hydrodesulfurization. TMPs have demonstrated remarkable efficiency in accelerating reactions by providing active sites for adsorption and facilitating the transformation of reaction intermediates, a feature that has increased the interest of TMPs in the electrochemical carbon dioxide reduction reaction (eCO 2 RR). Despite their growing use, the potential-dependent structural behavior of TMPs under operating electrochemical conditions remains insufficiently understood. This work investigates the dynamics of the Mo−P bond during eCO 2 RR and hydrogen evolution reaction (HER) using in situ extended X-ray absorption spectroscopy (EXAFS) studies at the Mo−K edge. Structural characterization of the synthesized MoP nanoparticles was performed by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results of the overall electrochemical activity of MoP are presented through linear sweep voltammetry (LSV) experiments in the potential range of 0 to −1.5 V versus Ag/AgCl and chronoamperometry (CA). Liquid products were analyzed by 1 H NMR spectroscopy. The synthesized catalyst showed increasing activity with the highest Faradaic efficiency of 11.75% for C 2+ products at −1.3 V vs Ag/AgCl. In situ EXAFS revealed a change in the average Mo−P bond distance during eCO 2 RR, whereas no such change was observed during the hydrogen evolution reaction (HER). This finding suggests that phosphorus, particularly through modulation of the Mo−P bond length, plays an important role in the eCO 2 RR and demonstrates how in situ EXAFS can track local structural perturbations in MoP catalysts during electrochemical operation, providing complementary structural insight that correlates with electrochemical behavior.

Catalysts↗
DOE OSTI2024

Targeted materials discovery using Bayesian algorithm execution

Rapid discovery and synthesis of future materials requires intelligent data acquisition strategies to navigate large design spaces. A popular strategy is Bayesian optimization, which aims to find candidates that maximize material properties; however, materials design often requires finding specific subsets of the design space which meet more complex or specialized goals. We present a framework that captures experimental goals through straightforward user-defined filtering algorithms. These algorithms are automatically translated into one of three intelligent, parameter-free, sequential data collection strategies (SwitchBAX, InfoBAX, and MeanBAX), bypassing the time-consuming and difficult process of task-specific acquisition function design. Our framework is tailored for typical discrete search spaces involving multiple measured physical properties and short time-horizon decision making. We demonstrate this approach on datasets for TiO 2 nanoparticle synthesis and magnetic materials characterization, and show that our methods are significantly more efficient than state-of-the-art approaches. Overall, our framework provides a practical solution for navigating the complexities of materials design, and helps lay groundwork for the accelerated development of advanced materials.

42 ENGINEERING↗
DOE OSTI2024

K–Co–Mo–S x chalcogel: high-capacity removal of Pb 2+ and Ag + and the underlying mechanisms

Chalcogenide-based aerogels, known as chalcogels, represent a novel class of nanoparticle-based porous amorphous materials characterized by high surface polarizability and Lewis base properties, exhibiting promising applications in clean energy and separation science. This work presents a K–Co–Mo–S x (KCMS) chalcogel as a highly efficient sorbent for heavy metal ions and details its sorption mechanisms. Its incoherent structure comprises Mo 2 V (S 2 ) 6 and Mo 3 IV S(S 6 ) 2 anion-like clusters with four- and six-coordinated Co–S polyhedra, forming a Co–Mo–S covalent network that hosts K + ions through electrostatic attraction. The interactions of KCMS with heavy metal ions, particularly Pb 2+ and Ag + , reveal that KCMS is exceptionally effective in removing these ions from ppm concentrations down to trace levels (≤5 ppb). KCMS rapidly removes Ag + (≈81.7%) and Pb 2+ (≈99.5%) within five minutes, achieving >99.9% removal within an hour, with a distribution constant K d ≥10 8 mL g -1 . KCMS exhibits an impressive removal capacity of 1378 mg g -1 for Ag + and 1146 mg g -1 for Pb 2+ , establishing it as one of the most effective materials known to date for heavy metal removal. This material is also effective for the removal of Ag + and Pb 2+ along with Hg 2+ , Ni 2+ , Cu 2+ , and Cd 2+ from various water sources even in the presence of highly concentrated and chemically diverse cations, anions, and organic species. Analysis of the post-interacted KCMS by synchrotron X-ray pair distribution function (PDF), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDS) revealed that the sorption of Pb 2+ , Ag + , and Hg 2+ mainly occurs by the exchange of K + and Co 2+ . Despite being amorphous, this material exhibits unprecedented ion-exchange mechanisms both for the ionically and covalently bound K + and Co 2+ , respectively. In conclusion, this discovery advances our knowledge of amorphous gels and guides material synthesis principles for the highly selective and efficient removal of heavy metal ions from water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Atomic Electron Tomography of Thin Films

In the past decade, the development of atomic electron tomography (AET) [1] has allowed for the 3D characterization of atomic positions in nanoparticle [2], monolayer [3], and needle [4] geometries. Furthermore, many technologically important systems are synthesized and utilized as thin films. Several challenges in sample preparation and data analysis have been overcome to expand the scope of AET to these systems. Polycrystalline yttrium-doped hafnium dioxide (HfO 2 ) was chosen as a model system, because it is technologically relevant as a high capacitance dielectric and ferroelectric.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Exosomes From Induced Pluripotent Stem Cell–Derived Cardiomyocytes Promote Autophagy for Myocardial Repair

Background. Induced pluripotent stem cells and their differentiated cardiomyocytes (iCMs) have tremendous potential as patient-specific therapy for ischemic cardiomyopathy following myocardial infarctions, but difficulties in viable transplantation limit clinical translation. Exosomes secreted from iCMs (iCM-Ex) can be robustly collected in vitro and injected in lieu of live iCMs as a cell-free therapy for myocardial infarction. Methods and Results. iCM-Ex were precipitated from iCM supernatant and characterized by protein marker expression, nanoparticle tracking analysis, and functionalized nanogold transmission electron microscopy. iCM-Ex were then used in in vitro and in vivo models of ischemic injuries. Cardiac function in vivo was evaluated by left ventricular ejection fraction and myocardial viability measurements by magnetic resonance imaging. Cardioprotective mechanisms were studied by JC-1 (tetraethylbenzimidazolylcarbocyanine iodide) assay, immunohistochemistry, quantitative real-time polymerase chain reaction, transmission electron microscopy, and immunoblotting. iCM-Ex measured ≈140 nm and expressed CD63 and CD9. iCM and iCM-Ex microRNA profiles had significant overlap, indicating that exosomal content was reflective of the parent cell. Mice treated with iCM-Ex demonstrated significant cardiac improvement post–myocardial infarction, with significantly reduced apoptosis and fibrosis. In vitro iCM apoptosis was significantly reduced by hypoxia and exosome biogenesis inhibition and restored by treatment with iCM-Ex or rapamycin. Autophagosome production and autophagy flux was upregulated in iCM-Ex groups in vivo and in vitro. Conclusions. iCM-Ex improve post–myocardial infarction cardiac function by regulating autophagy in hypoxic cardiomyoytes, enabling a cell-free, patient-specific therapy for ischemic cardiomyopathy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Direct and Sensitive Electrochemical Evaluation of Pramipexole Using Graphitic Carbon Nitride (gCN) Sensor

Pramipexole (PMXL) belongs to the benzothiazole class of aromatic compounds and is used in treating Parkinson’s disease; however, overdosage leads to some abnormal effects that could trigger severe side effects. Therefore, it demands a sensitive analytical tool for trace level detection. In this work, we successfully developed an electrochemical sensor for the trace level detection of PMXL, using the voltammetric method. For the analysis, graphitic carbon nitride (gCN) was opted and synthesized by using a high-temperature thermal condensation method. The synthesized nanoparticles were employed for surface characterization, using transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) techniques. The electrochemical characterization of the material was evaluated by using the electrochemical impedance spectroscopy (EIS) technique to evaluate the solution–electrode interface property. The cyclic voltammetry (CV) behavior of PMXL displayed an anodic peak in the forward scan, indicating that PMXL underwent electrooxidation, and an enhanced detection peak with lower detection potential was achieved for gCN-modified carbon paste electrode (gCN·CPE). The influence of different parameters on the electrochemical behavior was analyzed, revealing the diffusion governing the electrode process with an equal number of hydronium ions and electron involvement. For the fabricated gCN·CPE, good linearity range was noticed from 0.05 to 500 µM, and a lower detection limit (L D ) of 0.012 µM was achieved for the selected concentration range (0.5 to 30 µM). Selectivity of the electrode in PMXL detection was investigated by conducting an interference study, while the tablet sample analysis demonstrates the sensitive and real-time application of the electrode. The good recovery values for the analysis illustrate the efficiency of the electrode for PMXL analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Gold Nanoparticles AuNP Decorated on Fused Graphene-like Materials for Application in a Hydrogen Generation

The search for a sustainable, alternative fuel source to replace fossil fuels has led to an increased interest in hydrogen fuel. This combustible gas is not only clean-burning but can readily be produced via the hydrolysis of sodium borohydride. The main drawback of this reaction is that the reaction occurs relatively slowly and requires a catalyst to improve efficiency. This study explored a novel composite material made by combining gold nanoparticles and fused graphene-like materials (AuFGLM) as a catalyst for generating hydrogen via sodium borohydride. The novel fused graphene-like material (FGLM) was made with a sustainable dextrose solution and by using a pressure-processing method. Imaging techniques showed that FGLM appears to be an effective support template for nanoparticles. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Raman spectroscopy were used to characterize and determine the size, shape, and structure of nanoparticles and composites. The TEM study characterized the fused carbon backbone as it began to take on a rounder shape. The TEM images also revealed that the average diameter of the gold nanoparticle was roughly 23 nm. The FTIR study confirmed O-H, C-C, and C=O as functional groups in the materials. The EDS analysis showed that the composite contained approximately 6.3% gold by weight. The crystal structures of FGLM and AuFGLM were identified via P-XRD analysis. Various reaction conditions were used to test the catalytic ability of AuFGLM, including various solution pHs, temperatures, and doses of NaBH 4 . It was observed that optimal reaction conditions included high temperature, an acidic solution pH, and a higher dose of NaBH 4 . The activation energy of the reaction was determined to be 45.5 kJ mol -1 , and it was found that the catalyst could be used multiple times in a row with an increased volume of hydrogen produced in ensuing trials. The activation energy of this novel catalyst is competitive compared to similar catalysts and its ability to produce hydrogen over multiple uses makes the material an exciting choice for catalyzing the hydrolysis of NaBH 4 for use as a hydrogen fuel source.

08 HYDROGEN↗
DOE OSTI2025

Annealing-Driven Phase Control Enables Plasmonic Tunability in Alloy Nanoparticles

A critical aspect of designing and realizing useful solid state materials is controlling phase and structure to tailor physical properties. While common for semiconductor and quantum materials, plasmonic materials have inhabited a narrow phase space typically comprising one or two elements, e.g., face-centered cubic metals. While this simplicity has enabled robust use and understanding of Au and Ag nanoparticles, it has also limited the design and manipulation of solid state properties. Here, we show that by tuning the phase and elemental composition of binary Au−Sn nanoparticles, the steady-state absorbance and ultrafast thermalization properties of plasmonic nanoparticles can be controlled. Solid state characterization suggests this is due to the dealloying of Sn and destabilization of the AuSn phase, leading to higher quality Au 5 Sn intermetallic phases alongside Au. Consequently, this work shows that phase control can profoundly influence the properties of plasmonic nanoparticles, providing important tunability for applications in catalysis, photothermal heating, and sensing.

Gold↗
DOE OSTI2022

Synthesis and Characterization of Core-Shell Cu-Ru, Cu-Rh, and Cu-Ir Nanoparticles

Optimizing the use of expensive precious metals is critical to developing sustainable and low-cost processes for heterogeneous catalysis or electrochemistry. Here, we report a synthesis method that yields core-shell Cu-Ru, Cu-Rh, and Cu-Ir nanoparticles with the platinum-group metals segregated on the surface. The synthesis of Cu-Ru, Cu-Rh, and Cu-Ir particles allows maximization of the surface area of these metals and improves catalytic performance. Furthermore, the Cu core can be selectively etched to obtain nanoshells of the platinum-group metal components, leading to a further increase in the active surface area. Characterization of the samples was performed with X-ray absorption spectroscopy, X-ray powder diffraction, and ex situ and in situ transmission electron microscopy. CO oxidation was used as a reference reaction: the three core-shell particles and derivatives exhibited promising catalyst performance and stability after redox cycling. Furthermore, these results suggest that this synthesis approach may optimize the use of platinum-group metals in catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Organometallic Synthesis of Bimetallic Cobalt‐Rhodium Nanoparticles in Supported Ionic Liquid Phases (Co x Rh 100− x @SILP) as Catalysts for the Selective Hydrogenation of Multifunctional Aromatic Substrates

Abstract The synthesis, characterization, and catalytic properties of bimetallic cobalt‐rhodium nanoparticles of defined Co:Rh ratios immobilized in an imidazolium‐based supported ionic liquid phase (Co x Rh 100− x @SILP) are described. Following an organometallic approach, precise control of the Co:Rh ratios is accomplished. Electron microscopy and X‐ray absorption spectroscopy confirm the formation of small, well‐dispersed, and homogeneously alloyed zero‐valent bimetallic nanoparticles in all investigated materials. Benzylideneacetone and various bicyclic heteroaromatics are used as chemical probes to investigate the hydrogenation performances of the Co x Rh 100− x @SILP materials. The Co:Rh ratio of the nanoparticles is found to have a critical influence on observed activity and selectivity, with clear synergistic effects arising from the combination of the noble metal and its 3d congener. In particular, the ability of Co x Rh 100− x @SILP catalysts to hydrogenate 6‐membered aromatic rings is found to experience a remarkable sharp switch in a narrow composition range between Co 25 Rh 75 (full ring hydrogenation) and Co 30 Rh 70 (no ring hydrogenation).

Rengshausen, Simon↗
DOE OSTI2023

Deducing subnanometer cluster size and shape distributions of heterogeneous supported catalysts

Abstract Infrared (IR) spectra of adsorbate vibrational modes are sensitive to adsorbate/metal interactions, accurate, and easily obtainable in-situ or operando. While they are the gold standards for characterizing single-crystals and large nanoparticles, analogous spectra for highly dispersed heterogeneous catalysts consisting of single-atoms and ultra-small clusters are lacking. Here, we combine data-based approaches with physics-driven surrogate models to generate synthetic IR spectra from first-principles. We bypass the vast combinatorial space of clusters by determining viable, low-energy structures using machine-learned Hamiltonians, genetic algorithm optimization, and grand canonical Monte Carlo calculations. We obtain first-principles vibrations on this tractable ensemble and generate single-cluster primary spectra analogous to pure component gas-phase IR spectra. With such spectra as standards, we predict cluster size distributions from computational and experimental data, demonstrated in the case of CO adsorption on Pd/CeO 2 (111) catalysts, and quantify uncertainty using Bayesian Inference. We discuss extensions for characterizing complex materials towards closing the materials gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Next-generation poly-L-histidine formulations for miRNA mimic delivery

Many diseases, especially cancer, are caused by the abnormal expression of non-coding microRNAs (miRNAs), which regulate gene expression, leading to the development of miRNA-based therapeutics. Synthetic miRNA inhibitors have shown promising efficacy in blocking the activity of aberrant miRNAs that are upregulated in disease-specific pathologies. On the other hand, miRNAs that aid in preventing certain diseases and are reduced in expression in the disease state need different strategies. To tackle this, miRNA mimics, which mimic the activity of endogenous miRNAs, can be delivered for those miRNAs downregulated in different disease states. However, the delivery of miRNA mimics remains a challenge. Here, we report a cationic polylactic-co-glycolic acid (PLGA)-poly-L-histidine delivery system to deliver miRNA mimics. We chose miR-34a mimics as a proof of concept for miRNA delivery. miR-34a-loaded PLGA-poly-L-histidine nanoparticles (NPs) were formulated and biophysically characterized to analyze the structural properties of miRNA mimic-loaded NPs. In vitro efficacy was determined by investigating miR-34a and downstream target levels and performing cell viability and apoptosis assays. We confirmed in vivo efficacy through prolonged survival of miR-34a NP-treated A549-derived xenograft mice treated intratumorally. The results of these studies establish PLGA-poly-L-histidine NPs as an effective delivery system for miRNA mimics for treating diseases characterized by downregulated miRNAs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Elemental fractionation in aerosol laser-induced breakdown spectroscopy with nanosecond and femtosecond laser ablation

For the purpose of realizing atmospheric radiation plume tracking, laser-induced breakdown spectroscopy (LIBS) was performed to characterize Cs atomic emissions from airborne nanoparticles in a binary particle matrix using nanosecond and femtosecond laser ablation. As a surrogate to multi-element nuclear fallout particulates, both Cs and Na solutions were mixed with Cu at a 1:1.45 M concentration ratio and aerosolized to study elemental fractionation in atomic emissions, revealing Na I resonance emissions are enhanced whereas Cs I resonance emissions are reduced with Cu present despite sharing similar electronic and chemical properties. Femtosecond laser ablation reduced elemental fractionation effects by more than 50% while retaining the same temporal fractionation trends for Cs and Na. The origin of elemental fractionation in aerosol LIBS was further investigated using Al and Ti aerosols which revealed that the particle matrix induces changes to the local plasma temperature, population of atomic states, and subsequent molecular association and emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗