Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polarization splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Atomic Magnetometry Using a Metasurface Polarizing Beamsplitter in Silicon-on-Sapphire

Here, we demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling the measurement of magnetically sensitive circular birefringence in rubidium vapor through balanced polarimetry. We incorporated the metasurface into an atomic magnetometer based on nonlinear magneto-optical rotation and measured subnanotesla sensitivity, which is limited by low-frequency technical noise and transmission loss through the metasurface. To our knowledge, this work represents the first demonstration of SOS nanophotonics for atom-based sensing and paves the way for highly integrated, miniaturized atomic sensors with enhanced sensitivity and portability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

X-Band Scanning ARM Precipitation Radar, CF/Radial Formatted, Quality Controlled

The X-band Scanning ARM Precipitation Radar (X-SAPR) is an X-band dual-polarization Doppler weather radar. The X-SAPR operates in a simultaneous transmit and receive (STAR) mode, meaning that the transmit signal is split so that power is transmitted on both horizontal and vertical polarizations at the same time. The X-SAPR transmitter is a 200 kW (peak power) magnetron. The receiver is based upon the Vaisala RVP-900 and runs Vaisala’s IRIS software. In addition to the first three Doppler moments (reflectivity, radial velocity, and spectra width), the X-SAPR also provides differential reflectivity, correlation coefficient, and specific differential phases. The dual-polarization variables enable estimates of rainfall rates and identification of precipitation types. At the Southern Great Plains site, three X-SAPRs surround the Central Facility, allowing the use of multi-Doppler velocity retrievals to estimate wind fields.

xsaprcfrqc↗
DOE OSTI2024

Observation of plaid-like spin splitting in a noncoplanar antiferromagnet

Spatial, momentum and energy separation of electronic spins in condensed matter systems guides the development of novel devices where spin-polarized current is generated and manipulated. Recent attention on a set of previously overlooked symmetry operations in magnetic materials leads to the emergence of a new type of spin splitting, enabling giant and momentum-dependent spin polarization of energy bands on selected antiferromagnets. Despite the ever-growing theoretical predictions, the direct spectroscopic proof of such spin splitting is still lacking. Here, we provide solid spectroscopic and computational evidence for the existence of such materials. In the noncoplanar antiferromagnet MnTe 2 , the in-plane components of spin are found to be antisymmetric about the high-symmetry planes of the Brillouin zone, comprising a plaid-like spin texture in the antiferromagnetic (AFM) ground state. Such an unconventional spin pattern, further found to diminish at the high- temperature paramagnetic state, stems from the intrinsic AFM order instead of spin- orbit coupling (SOC). Furthermore, our finding demonstrates a new type of quadratic spin texture induced by time-reversal breaking, placing AFM spintronics on a firm basis and paving the way for studying exotic quantum phenomena in related materials.

Electronic devices↗
NASA NTRS1985

Contribution functions for Zeeman-split lines, and line formation in photospheric faculae

The transfer of polarized light in an inhomogeneous stellar atmosphere, and the formation of magnetically sensitive spectral lines, are discussed. A new method for the solution of the transfer equations is proposed. The method gives a natural definition of the contribution functions for Stokes' parameters, i.e., functions describing the contributions from different parts along the line-of-sight (LOS). The formalism includes all magneto-optical effects, and allows for an arbitrary variation of magnetic field, velocity field, temperature, density, etc., along the LOS. The formation of FeI lambda 5250.2 in photospheric faculae is described. A potential-field model of a facular element is presented, and spectra profiles and contribution functions are computed for the Stokes parameters I, Q, and V.

Vanballegooijen, A. A.↗
DOE OSTI2020

Ultrafast photoinduced band splitting and carrier dynamics in chiral tellurium nanosheets

Trigonal tellurium (Te) is a chiral semiconductor that lacks both mirror and inversion symmetries, resulting in complex band structures with Weyl crossings and unique spin textures. Detailed time-resolved polarized reflectance spectroscopy is used to investigate its band structure and carrier dynamics. The polarized transient spectra reveal optical transitions between the uppermost spin-split H4 and H5 and the degenerate H6 valence bands (VB) and the lowest degenerate H6 conduction band (CB) as well as a higher energy transition at the Lpoint. Surprisingly, the degeneracy of the H6 CB (a proposed Weyl node) is lifted and the spin-split VB gap is reduced upon photoexcitation before relaxing to equilibrium as the carriers decay. Using ab initio density functional theory (DFT) calculations, we conclude that the dynamic band structure is caused by a photoinduced shear strain in the Te film that breaks the screw symmetry of the crystal. The band-edge anisotropy is also reflected in the hot carrier decay rate, which is a factor of two slower along the c-axis than perpendicular to it. The majority of photoexcited carriers near the band-edge are seen to recombine within 30 ps while higher lying transitions observed near 1.2 eV appear to have substantially longer lifetimes, potentially due to contributions of intervalley processes in the recombination rate. These new findings shed light on the strong correlation between photoinduced carriers and electronic structure in anisotropic crystals, which opens a potential pathway for designing novel Te-based devices that take advantage of the topological structures as well as strong spin-related properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Spin-phonon resonances in nearly polar metals with spin-orbit coupling

In metals in the vicinity of a polar transition, interactions between electrons and soft phonon modes remain to be determined. Here we explore the consequences of spin-orbit assisted electron-phonon coupling on the collective modes of such nearly polar metals in the presence of magnetic field. We find that the soft polar phonon hybridizes with spin-flip electronic excitations of the Zeeman-split bands leading to an anticrossing. The associated energy splitting allows for an unambiguous determination of the strength of the spin-orbit mediated coupling to soft modes in polar metals by spectroscopic experiments. Here, the approach to the polar transition is reflected by the softening of the effective g factor of the hybridized spin-flip mode. Analyzing the static limit, we find that the polar order parameter can be oriented by magnetic field. This provides possibilities for alternative switching protocols in polar metallic materials. We demonstrate that the effects we predict can be observed with current experimental techniques and discuss promising material candidates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Acoustic Amplification in the Far Infrared Focal Plane Assembly of the Composite Infrared Spectrometer (CIRS) for the Cassini Mission to Saturn

The Composite Infrared Spectrometer (CIRS) of the Cassini mission to Saturn has two interferometers covering the far infrared FIR and mid infrared, MIR wavelength region. The FIR is a polarizing Michelson interferometer which presents a collimated output beam to the FIR focal plane. The focal plane consists of a parabolic focus mirror and an analyzer grid, which splits the output beams into transmitted and reflected components. The two polarizations are focussed onto two thermopile detectors; each consisting of a gold black foil welded to the top of two bismuth pyramids. The gold black is 30 microns thick, and the weld area is approximately 2 microns in diameter. The detectors are extremely fragile and the weld can be broken with a miniscule amount of airflow. The detectors consistently passed acoustic testing to qualification levels that simulated the launch environment of the Titan IV launch vehicle. However, they experienced a 50% failure rate when installed in the focal plane assembly during instrument level acoustic tests. A test focal plane was developed with small pressure transducers in the nominal detector locations. These tests indicated over 10 dB of acoustic amplification in the focal plane within the instrument during testing. New techniques were developed to allow testing of the focal plane without over testing the instrument, and modifications were made the focal plane assembly to successfully attenuate the amplification.

Hagopian, John G.↗
DOE OSTI2022

Rashba effects in lead-free ferroelectric semiconductor [CH 3 PH 3 ]SnBr 3

Here, first-principles density functional theory computations are used to predict Rashba effects cofunctional with ferroelectricity in a recently synthesized lead-free hybrid organic-inorganic perovskite MPSnBr 3 (MP=methylphosphonium, [CH 3 PH 3 ] + ). The ground state of the material is polar monoclinic with calculated spontaneous polarization of 3.01 µC/cm 2 . It exhibits near band edges spin-splitting of up to 3.3 meV and Rashba coefficient up to 0.62 eV Å. The spin textures have different topology in the conduction and valence band, which originates from the difference in the spin-momentum coupling strengths. They occur in two orthogonal planes of the Brillouin zone and are coupled to the direction of spontaneous polarization. These features persist at a finite temperature of 293 K. At 333 K, that is above monoclinic to orthorhombic phase transition, spontaneous polarization is reduced to 0.15 µC/cm 2 , while the maximum spin splitting and Rashba coefficient reduce slightly to the value of 2.9 meV and 0.41 eV Å, respectively. The spin textures remain coupled with the polarization direction. We investigate the dependence of the aforementioned properties on the choice of computational methodology to extend the first-principles predictions to include finite temperature effects. We find that the predictions are sensitive to the methodology. Our study reveals the potential of MPSnBr 3 for low-temperature applications in spintronics and quantum computing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Transition-Metal-Related Quantum Emitters in Wurtzite AlN and GaN

Transition-metal centers exhibit a paramagnetic ground state in wide-bandgap semiconductors and are promising for nanophotonics and quantum information processing. Specifically, there is a growing interest in discovering prominent paramagnetic spin defects that can be manipulated using optical methods. Here, we investigate the electronic structure and magneto-optical properties of Cr and Mn substitutional centers in wurtzite AlN and GaN. We use state-of-the-art hybrid density functional theory calculations to determine level structure, stability, optical signatures, and magnetic properties of these centers. The excitation energies are calculated using the constrained occupation approach and rigorously verified with the complete active space configuration interaction approach. Our simulations of the photoluminescence spectra indicate that $Cr$$^{1+}_{Al}$ in AlN and $Cr$$^{1+}_{Ga}$ in GaN are responsible for the observed narrow quantum emission near 1.2 eV. We compute the zero-field splitting (ZFS) parameters and outline an optical spin polarization protocol for $Cr$$^{1+}_{Al}$ and $Cr$$^{1+}_{Ga}$. Our results demonstrate that these centers are promising candidates for spin qubits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Optimizing structured surfaces for diffractive waveguides

We introduce universal diffractive waveguide designs that can match the performance of conventional dielectric waveguides and achieve various functionalities. Optimized using deep learning, diffractive waveguides can be cascaded to form any desired length and are comprised of transmissive diffractive surfaces that permit the propagation of desired modes with low loss and high mode purity. In addition to guiding the targeted modes through cascaded diffractive units, we also developed various waveguide components and introduced bent diffractive waveguides, rotating the direction of mode propagation, as well as spatial and spectral mode filtering and mode splitting diffractive waveguide designs, and mode-specific polarization control. This framework was experimentally validated in the terahertz spectrum to selectively pass certain spatial modes while rejecting others. Without the need for material dispersion engineering diffractive waveguides can be scaled to operate at different wavelengths, including visible and infrared spectrum, covering potential applications in, e.g., telecommunications, imaging, sensing and spectroscopy.

Applied optics↗
DOE OSTI2025

Bridge connectivity effects on photoinduced ground-state electron spin polarization

Transient electron paramagnetic resonance (TREPR) spectroscopy has been used to probe photoinduced electron spin polarization in the recovered ground states of four radical-elaborated (CAT)Pt(bpy) donor-acceptor complexes (CAT = catechol; bpy = 4,4'-di-tert-butyl-2,2'-bipyridine). These complexes are comprised of one or two S = 1/2 nitronyl nitroxide radicals attached through different phenylethynyl bridges to the 3- or 3,6 positions of the CAT donor. In this paper, we demonstrate the effects of substitution patterns on the magnitude of the TREPR signal, thereby guiding future design principles for generating and understanding the origin of photoinduced electron spin polarization in these and related chromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single quantum emitters with spin ground states based on Cl bound excitons in ZnSe

Defects in wide-band-gap semiconductors are promising qubit candidates for quantum communication and computation. Epitaxially grown II-VI semiconductors are particularly promising host materials due to their direct band gap and potential for isotopic purification to a spin-zero nuclear background. Here, we show an alternative type of single photon emitter with potential electron spin qubits based on Cl impurities in ZnSe. We utilize a quantum well to increase the binding energies of donor emission and confirm single photon emission with short radiative lifetimes of 192 ps. Furthermore, we verify that the ground state of the Cl donor complex contains a single electron by observing two-electron-satellite emission, leaving the electron in higher orbital states. We also characterize the Zeeman splitting of the exciton transition by performing polarization-resolved magnetic spectroscopy on single emitters. Our results suggest single Cl impurities are suitable as a single photon source with a potential photonic interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Tools to perform data reduction of time-of-flight data taken on BL4A (MagRef)—a Jupyter notebook approach

A collection of modules or tools to produce reflectivity profiles from data acquired with unpolarized and polarized neutron beams using the BL4A (MagRef) instrument at the Spallation Neutron Source. The Jupyter notebook approach offers transparency to the user on what is done with the data, and once the event mode data are stored as NumPy binary files empowers the user to perform the steps from their own laptop without the need for Mantid. The notebook offers two options for background subtraction, applies corrections for the wavelength dependence of the polarizer and flipper efficiencies, accounts for Zeeman energy splitting of the spin-flip channels, Qz-bins the data along contours of constant Qz, propagates errors and writes results in text format suitable for analysis with tools such as GenX.

Fitzsimmons, Michael [Oak Ridge Associated Univ., ↗
NASA NTRS2012

Coronal Magnetic Field Measurement Using CME-Driven Shock Observations

Collisionless shocks form ahead of coronal mass ejections (CMEs) when the CME speed exceeds the Alfven speed of the ambient plasma in the corona and interplanetary medium. The shock stands at a distance from the CME flux rope that depends on the shock Mach number, the geometry of the driver, and the adiabatic index. While the shock ahead of the CME has been observed for a long time in the in situ data, it has been identified recently near the Sun in the coronagraphic and EUV images. Unlike in situ observations, the imaging observations are two dimensional, so one can better discern the CME-shock relationship near the Sun. Gopalswamy and Yashiro demonstrated that the coronal magnetic field can be derived from the shock standoff distance measured in coronagraphic images. The method involves measuring the standoff distance, the radius of curvature of the flux rope, and assuming the value of the adiabatic index and deriving the Alfvenic Mach number. The next step is to derive the Alfvenic Mach number from the measured shock speed and an estimate of the local solar wind speed. The final step involves deriving the magnetic field from the Alfven speed by measuring the local plasma density either from coronagraphic (polarized brightness) images or from the band-splitting of type II radio bursts. In this paper, we derive the combined magnetic field profile from near the Sun to the edge of the LASCO field of view (1.5 to 30 solar radii) and compare it with the current model profiles.

Gopalswarmy, Nat↗
DOE OSTI2025

Modeling strain and quantum confinement in GaAs/Ga x In 1−x P superlattices for spin-polarized electron sources

In this study, we systematically design and simulate a series of GaAs-based superlattice configurations aimed at enhancing heavy-hole–light-hole band splitting while simultaneously optimizing band alignment to reduce the conduction band barrier, thereby facilitating efficient electron transport. These combined effects are crucial for achieving high electron spin polarization and high quantum efficiency, the two key performance metrics of next-generation spin-polarized electron sources. We investigated three types of superlattice architectures: (1) compressively strained GaAs wells on GaInP barriers, yielding a maximum band splitting of 140 meV, (2) lattice-matched GaAs/GaInP structures, resulting in the maximum band splitting of 75 meV, and (3) tensile strained GaAs wells on GaInP barriers, with a maximum band splitting of 40 meV. The results demonstrate the tunability of heavy-hole–light-hole band splitting and establish a design framework for high-performance spin-polarized photocathodes based on a combination of strain engineering, quantum confinement, and optimized heterostructure design.

Electron sources↗
NASA NTRS2011

Multi-Wavelength, Multi-Beam, and Polarization-Sensitive Laser Transmitter for Surface Mapping

A multi-beam, multi-color, polarized laser transmitter has been developed for mapping applications. It uses commercial off-the-shelf components for a lowcost approach for a ruggedized laser suitable for field deployment. The laser transmitter design is capable of delivering dual wavelengths, multiple beams on each wavelength with equal (or variable) intensities per beam, and a welldefined state of polarization. This laser transmitter has been flown on several airborne campaigns for the Slope Imaging Multi-Polarization Photon Counting Lidar (SIMPL) instrument, and at the time of this reporting is at a technology readiness level of between 5 and 6. The laser is a 1,064-nm microchip high-repetition-rate laser emitting energy of about 8 microjoules per pulse. The beam was frequency-doubled to 532 nm using a KTP (KTiOPO4) nonlinear crystal [other nonlinear crystals such as LBO (LiB3O5) or periodically poled lithium niobiate can be used as well, depending on the conversion efficiency requirements], and the conversion efficiency was approximately 30 percent. The KTP was under temperature control using a thermoelectric cooler and a feedback monitoring thermistor. The dual-wavelength beams were then spectrally separated and each color went through its own optical path, which consisted of a beam-shaping lens, quarterwave plate (QWP), and a birefringent crystal (in this case, a calcite crystal, but others such as vanadate can be used). The QWP and calcite crystal set was used to convert the laser beams from a linearly polarized state to circularly polarized light, which when injected into a calcite crystal, will spatially separate the circularly polarized light into the two linear polarized components. The spatial separation of the two linearly polarized components is determined by the length of the crystal. A second set of QWP and calcite then further separated the two beams into four. Additional sets of QWP and calcite can be used to further split the beams into multiple orders of two. The spatially separated beams had alternating linearly polarization states; a half-wave plate (HWP) array was then made to rotate the alternating states of A multi-beam, multi-color, polarized laser transmitter has been developed for mapping applications. It uses commercial off-the-shelf components for a lowcost approach for a ruggedized laser suitable for field deployment. The laser transmitter design is capable of delivering dual wavelengths, multiple beams on each wavelength with equal (or variable) intensities per beam, and a welldefined state of polarization. This laser transmitter has been flown on several airborne campaigns for the Slope Imaging Multi-Polarization Photon Counting Lidar (SIMPL) instrument, and at the time of this reporting is at a technology readiness level of between 5 and 6. The laser is a 1,064-nm microchip high-repetition-rate laser emitting energy of about 8 microjoules per pulse. The beam was frequency-doubled to 532 nm using a KTP (KTiOPO4) nonlinear crystal [other nonlinear crystals such as LBO (LiB3O5) or periodically poled lithium niobiate can be used as well, depending on the conversion efficiency requirements], and the conversion efficiency was approximately 30 percent. The KTP was under temperature control using a thermoelectric cooler and a feedback monitoring thermistor. The dual-wavelength beams were then spectrally separated and each color went through its own optical path, which consisted of a beam-shaping lens, quarterwave plate (QWP), and a birefringent crystal (in this case, a calcite crystal, but others such as vanadate can be used). The QWP and calcite crystal set was used to convert the laser beams from a linearly polarized state to circularly polarized light, which when injected into a calcite crystal, will spatially separate the circularly polarized light into the two linear polarized components. The spatial separation of the two linearly polarized components is determined by the length of the crystal. A cond set of QWP and calcite then further separated the two beams into four. Additional sets of QWP and calcite can be used to further split the beams into multiple orders of two. The spatially separated beams had alternating linearly polarization states; a half-wave plate (HWP) array was then made to rotate the alternating states of

Yu, Anthony W.↗
DOE OSTI2022

Electronic and magnetic properties of iridium-based novel Heusler alloys

We report half-metallicity and magnetism including exchange splitting are the most significant physical parameters to predict and design a candidate material for spintronic applications. We report here an ab-initio investigation on chemical formation and dynamical stability along with electronic structure and magnetic properties of Ir 2 Cr (Si, Ge) and IrRhCr (Si, Ge) Heusler alloys. The negative formation and cohesive energies with positive phonon dispersions confirm the stabilities of these alloys. Electronic structure calculations reveal that Ir 2 Cr (Si, Ge) and IrRhCrSi alloys are half-metallic ferromagnets with unprecedented exchange splitting. In addition, IrRhCrGe also shows semi-metallic nature. All of these materials follow Slater Pauling rule with large magnetic moments and 100% spin-polarization. With Cr bearing the majority of the local magnetic moment and exchange splitting, a ferromagnetic state is more stable than a nonmagnetic state. The electronic charge distribution and population analysis confirm mixed ionic and covalent bonding. The magnetocrystalline anisotropy energy, with the easy magnetization along the [1 1 1] direction, is significantly high in Ir 2 CrGe. Elastic constants such as shear (G), bulk (B), Young’s moduli, and Poisson’s ratio indicate that the IrRhCrSi and IrRhCrGe alloys are mechanically stable, and Ir 2 CrSi and Ir 2 CrGe are mechanically unstable. The Pugh’s (B/G) and Poisson’s ratios confirm that the stable alloys are ductile.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Entangled spin-polarized excitons from singlet fission in a rigid dimer

Abstract Singlet fission, a process that splits a singlet exciton into a biexciton, has promise in quantum information. We report time-resolved electron paramagnetic resonance measurements on a conformationally well-defined acene dimer molecule, TIPS-BP1', designed to exhibit strongly state-selective relaxation to specific magnetic spin sublevels. The resulting optically pumped spin polarization is a nearly pure initial state from the ensemble. The long-lived spin coherences modulate the signal intrinsically, allowing a measurement scheme that substantially removes noise and uncertainty in the magnetic resonance spectra. A nonadiabatic transition theory with a minimal number of spectroscopic parameters allows the quantitative assignment and interpretation of the spectra. In this work, we show that the rigid dimer TIPS-BP1' supports persistent spin coherences at temperatures far higher than those used in conventional superconducting quantum hardware.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗