Search NASA⌕ Search

SEARCH · Search NASA

Results for “fault-tolerant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The CARE 3 Phase 3 Report: Test and Evaluation

CARE 3 (Computer-Aided Reliability Estimation, version three) is a computer program designed to help estimate the reliability of complex, redundant systems; although the program can model a wide variety of redundant structures, it was developed specifically for fault-tolerant avionics systems, systems distinguished by the need for extremely reliable performance since a system failure could well result in the loss of human life. CARE 3 further generalizes the class of system structures that can be modeled and greatly expands the coverage model to take into account such effects as intermittent and transient faults, latent faults, error propagation, etc. The initial test and evaluation of CARE 3 are reported.

Stiffler, J. J.↗
NASA NTRS1983

Testing the bus guardian unit of the FTMP

Fault-tolerant multiprocessor (FTMP) operation is discussed. Fault-modeling in the bus guardian units (BGUs) is covered. Testing the BGU is discussed. A testing algorithm is proposed.

Jha, M. K.↗
NASA NTRS1983

On Restructurable Control System Theory

The state of stochastic system and control theory as it impacts restructurable control issues is addressed. The multivariable characteristics of the control problem are addressed. The failure detection/identification problem is discussed as a multi-hypothesis testing problem. Control strategy reconfiguration, static multivariable controls, static failure hypothesis testing, dynamic multivariable controls, fault-tolerant control theory, dynamic hypothesis testing, generalized likelihood ratio (GLR) methods, and adaptive control are discussed.

Athans, M.↗
NASA NTRS1982

The software-implemented fault tolerance /SIFT/ approach to fault tolerant computing

SIFT is an experimental computer designed for highly reliable flight-control service in advanced air transports. Its development was intended to integrate and demonstrate the latest techniques in fault-tolerant computing. During its development, several new problems of some generality were uncovered and solved. The technology developed for the validation of its design is seen as being perhaps as important as the design itself. The SIFT design is described, as is the way in which the design and its validation were shaped by the requirements of its intended application. Attention is also given to reliability and fault tolerance. The most significant feature of the hardware design is the absence of elements that can generate multiple faults, such as shared clocks or data buses. It is noted that the software is realized in only 800 lines of code, of which 80% are in a high-level language.

Goldberg, J.↗
NASA NTRS1983

Data systems - Optical bus will connect distributed system

The fiber optics buses currently under consideration for the NASA space station program will have data rates of at least 20 Mb/sec. The network interconnection scheme that will eventually be used is, however, uncertain. A NASA-Langley effort on graph networks includes adaptive, fault-tolerant and self-correcting operations. A breadboard program at NASA-Johnson includes evaluations of standard devices, called 'bus interface units', in an adaptive and fault-correcting chordal or concentric ring type of network. Fiber optics would allow an evolution to wavelength modulation techniques in such systems.

Swingle, W. L.↗
NASA NTRS1984

The implementation and use of Ada on distributed systems with high reliability requirements

The use and implementation of Ada in distributed environments in which reliability is the primary concern is investigated. Emphasis is placed on the possibility that a distributed system may be programmed entirely in ADA so that the individual tasks of the system are unconcerned with which processors they are executing on, and that failures may occur in the software or underlying hardware. The primary activities are: (1) Continued development and testing of our fault-tolerant Ada testbed; (2) consideration of desirable language changes to allow Ada to provide useful semantics for failure; (3) analysis of the inadequacies of existing software fault tolerance strategies.

Knight, J. C.↗
NASA NTRS1983

Operational characteristics of the dispersed sensor processor mesh

The dispersed sensor processing mesh (DSPM) is part of an experimental system used to pursue a proof of concept for an advanced fault-tolerant communication strategy. The DSPM experiments incorporate sensors and effectors into an ultra-reliable nodal network in which a central bus controller performs algorithms to grow and maintain the network. The experiments demonstrate that DSPM is an achievable communication network that can sustain failures and continue to function properly. The results of the experiment give insights into the unique characteristics of the DSPM network and the network's capacity to limit physical damage propagation, limit damaged-data propagation, and to survive cyclic communication paths. This paper describes the concept, mechanization, and performance of the DSPM system in a real-time flight-critical environment.

Abbott, L. W.↗
NASA NTRS1983

Fault detection, isolation and reconfiguration in FTMP Methods and experimental results

The Fault-Tolerant Multiprocessor (FTMP) is a highly reliable computer designed to meet a goal of 10 to the -10th failures per hour and built with the objective of flying an active-control transport aircraft. Fault detection, identification, and recovery software is described, and experimental results obtained by injecting faults in the pin level in the FTMP are presented. Over 21,000 faults were injected in the CPU, memory, bus interface circuits, and error detection, masking, and error reporting circuits of one LRU of the multiprocessor. Detection, isolation, and reconfiguration times were recorded for each fault, and the results were found to agree well with earlier assumptions made in reliability modeling.

Lala, J. H.↗
NASA NTRS1984

Space station - Technology development

The NASA manned space station program's systems technology effort involves the development of novel techniques that will reduce the scope of tasks neeeded for design, development, testing and evaluation of the hardware. Operations technology efforts encompass analyses that will define those techniques best able to improve the efficiency and reduce the costs of space station functions. The technology objective for data management calls for a fault-tolerant, distributed, expandable and adaptable, as well as repairable and user-friendly, flight data management system that employs state-of-the-art hardware and software. The space station's power system includes the largest element, a 'solar blanket', and the heaviest component, the batteries, of all the subsystems. A thermal management system for the power system is of paramount importance. Attention is also given to the exacting demands of attitude control and stabilization and a regenerative life support system of the requisite capacity and reliability.

Carlisle, R. F.↗
NASA NTRS1984

Test experience on an ultrareliable computer communication network

The dispersed sensor processing mesh (DSPM) is an experimental, ultra-reliable, fault-tolerant computer communications network that exhibits an organic-like ability to regenerate itself after suffering damage. The regeneration is accomplished by two routines - grow and repair. This paper discusses the DSPM concept for achieving fault tolerance and provides a brief description of the mechanization of both the experiment and the six-node experimental network. The main topic of this paper is the system performance of the growth algorithm contained in the grow routine. The characteristics imbued to DSPM by the growth algorithm are also discussed. Data from an experimental DSPM network and software simulation of larger DSPM-type networks are used to examine the inherent limitation on growth time by the growth algorithm and the relationship of growth time to network size and topology.

Abbott, L. W.↗
NASA NTRS1984

Data and results of a laboratory investigation of microprocessor upset caused by simulated lightning-induced analog transients

Advanced composite aircraft designs include fault-tolerant computer-based digital control systems with thigh reliability requirements for adverse as well as optimum operating environments. Since aircraft penetrate intense electromagnetic fields during thunderstorms, onboard computer systems maya be subjected to field-induced transient voltages and currents resulting in functional error modes which are collectively referred to as digital system upset. A methodology was developed for assessing the upset susceptibility of a computer system onboard an aircraft flying through a lightning environment. Upset error modes in a general-purpose microprocessor were studied via tests which involved the random input of analog transients which model lightning-induced signals onto interface lines of an 8080-based microcomputer from which upset error data were recorded. The application of Markov modeling to upset susceptibility estimation is discussed and a stochastic model development.

Belcastro, C. M.↗
NASA NTRS1983

Peer Review of a Formal Verification/Design Proof Methodology

The role of formal verification techniques in system validation was examined. The value and the state of the art of performance proving for fault-tolerant compuers were assessed. The investigation, development, and evaluation of performance proving tools were reviewed. The technical issues related to proof methodologies are examined. The technical issues discussed are summarized.

Source record↗
NASA NTRS1983

Some methods of estimating a coverage parameter

To demonstrate the high reliability of fault-tolerant computing systems, experimental testing can be performed by injecting faults into their hardware and observing the times needed to detect and isolate failed components and reconfigure the good components. Coverage, a parameter measuring continued system success, is the probability that recovery occurs before other, perhaps catastrophic, component failures occur. Methods of estimating coverage are given for the case of randomly selecting a subset of the pins or chips for testing. Pin-level samples of times to recovery are treated by the Type I censoring model often used in life testing.

Lee, L. D.↗
NASA NTRS1984

Test experience on an ultrareliable computer communication network

The dispersed sensor processing mesh (DSPM) is an experimental, ultrareliable, fault-tolerant computer communications network that exhibits an organic-like ability to regenerate itself after suffering damage. The regeneration is accomplished by two routines - grow and repair. This paper discusses the DSPM concept for achieving fault tolerance and provides a brief description of the mechanization of both the experiment and the six-node experimental network. The main topic of this paper is the system performance of the growth algorithm contained in the grow routine. The characteristics imbued to DSPM by the growth algorithm are also discussed. Data from an experimental DSPM network and software simulation of larger DSPM-type networks are used to examine the inherent limitation on growth time by the growth algorithm and the relationship of growth time to network size and topology.

Abbott, L. W.↗
NASA NTRS1984

Autonomous spacecraft design methodology

A methodology for autonomous spacecraft design blends autonomy requirements with traditional mission requirements and assesses the impact of autonomy upon the total system resources available to support fault-tolerance and automation. A baseline functional design can be examined for autonomy implementation impacts, and the costs, risk, and benefits of various options can be assessed. The result of the process is a baseline design that includes autonomous control functions.

Divita, E. L.↗
NASA NTRS1984

Validation of fault-free behavior of a reliable multiprocessor system - FTMP: A case study

A program of experiments has been conducted at NASA-Langley to test the fault-free performance of a Fault-Tolerant Multiprocessor (FTMP) avionics system for next-generation aircraft. Baseline measurements of an operating FTMP system were obtained with respect to the following parameters: instruction execution time, frame size, and the variation of clock ticks. The mechanisms of frame stretching were also investigated. The experimental results are summarized in a table. Areas of interest for future tests are identified, with emphasis given to the implementation of a synthetic workload generation mechanism on FTMP.

Clune, E.↗
NASA NTRS1984

A user's view of CARE III

The present computerized reliability predictor for digital fault-tolerant systems whose sizes are of the order of one million Markovian equivalent states, employs advanced stochastic modeling techniques and implements a mixed Markov model that enables it to drastically reduce the state size of hitherto computationally unobtainable models. Attention is given to the concepts of failure, fault, and error, in the context of the novel system's fault/error-handling models. Examples are drawn from the system's user-friendly interface dialog.

Bavuso, S. J.↗