Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Finite Element Modeling for Compression Strength Prediction of Honeycomb Cores with Geometric Imperfections Measured using X-ray CT Imaging

Aluminum honeycomb cores have been used extensively in composite sandwich panels due to having high bending rigidity while maintaining low density. During manufacturing of the aluminum honeycomb, the thin metal walls are susceptible to imperfections that deviate from an ideal honeycomb shape. Computational tools to quantify imperfections and investigate their effects on quasi-static compression and impact response can inform design criteria to construct safer and lighter launch vehicle structures. This paper presents the results of a study on finite element modeling of metallic honeycomb cores (HCC) with geometric imperfections measured using X-ray Computer Tomography (CT), to predict the compression response. Finite element (FE) models are constructed with measured imperfections with appropriate boundary conditions. It is shown that the average behavior of larger 10x11 cell models can be predicted by sampling single cell models from the larger domain. Amplification of imperfections for cells at the center of sampled specimens are mode switched from the larger out-of-plane imperfection to the mode shape of the adjacent cells resulting in strengthening of the center specimens.

aluminum honeycomb↗
NASA NTRS1986

Experimental evaluation of the ring focus test for X-ray telescopes using AXAF's technology mirror assembly, MSFC CDDF Project No. H20

A test method particularly suited for X-ray telescopes was evaluated experimentally. The method makes use of a focused ring formed by an annular aperture when using a point source at a finite distance. This would supplement measurements of the best focus image which is blurred when the test source is at a finite distance. The telescope used was the Technology Mirror Assembly of the Advanced X-ray Astrophysis Facility (AXAF) program. Observed ring image defects could be related to the azimuthal location of their sources in the telescope even though in this case the predicted sharp ring was obscured by scattering, finite source size, and residual figure errors.

Zissa, D. E.↗
NASA NTRS1988

Measurement of micro-roughness and effects of detector bandwidth and finite width

Surface micro-roughness of grazing incidence optics has long been recognized as a critical parameter in the control of the scattered X-ray intensity and its effects on the point spread function half-energy width. Accurate knowledge of the amplitude of surface micro-roughness is vital to assess optic predicted performance during the final stages of fabrication. This requires not only a knowledge of the spatial bandwidth over which surface features must be measured, but also knowledge of the bandwidth of the measurement instrument. We show that the standard assumption that instruments respond up to their Nyquist limit is an oversimplification which neglects the finite detector size and its bandwidth limiting effects when sampling a real (i.e., two-dimensional) surface.

Reid, P. B.↗
NASA NTRS2008

Vibration Response Models of a Stiffened Aluminum Plate Excited by a Shaker

Numerical models of structural-acoustic interactions are of interest to aircraft designers and the space program. This paper describes a comparison between two energy finite element codes, a statistical energy analysis code, a structural finite element code, and the experimentally measured response of a stiffened aluminum plate excited by a shaker. Different methods for modeling the stiffeners and the power input from the shaker are discussed. The results show that the energy codes (energy finite element and statistical energy analysis) accurately predicted the measured mean square velocity of the plate. In addition, predictions from an energy finite element code had the best spatial correlation with measured velocities. However, predictions from a considerably simpler, single subsystem, statistical energy analysis model also correlated well with the spatial velocity distribution. The results highlight a need for further work to understand the relationship between modeling assumptions and the prediction results.

Cabell, Randolph H.↗
NASA NTRSDate not supplied

Impact of Thermoplastic Composites: Testing and Modeling

Thermoplastic Composites (TPCs) are being increasingly considered for aerospace applications given their faster manufacturing cycles and lower cost. The NASA High-Rate Composite Aircraft Manufacturing (HiCAM) project aims to evaluate and mature thermoplastic manufacturing technologies to achieve a 4X – 6X increase in the production rate of Next Generation Single Aisle (NGSA) commercial aircraft. Within the purview of the NASA HiCAM project, this work investigates the response of thermoplastic composites under High Energy Dynamic Impact (HEDI) conditions. HEDI tests were conducted on panels fabricated with a carbon fiber reinforced low melt semi-crystalline resin TC1225 LMPAEK T700G (T700/LMPAEK) material system. A blunt metal projectile was chosen as the impactor which impacted the T700/LMPAEK panels over a range of impact velocities imparted by a gas gun test setup. As expected, lower velocity impacts caused the projectile to rebound, whereas higher velocity impacts resulted in the projectile penetrating the test panels. For the test cases in which the projectile rebounded, the predominant damage modes recorded with Ultrasonic (UT) scans included interlaminar delaminations which exhibited a “rotating fan” like structure when viewed in the through-thickness direction. Additionally, the dynamic deflection of the center point of the back face of the test panels and the velocity of the projectile was also measured during the test. Finite element models were developed to model a test case in which the projectile rebounded. These models were developed using LS-DYNA® wherein the primary objective was to evaluate the ability of the material model MAT299 to capture the dynamic response and damage modes in the T700/LMPAEK test panels. MAT299 is a Deformation Gradient Decomposition (DGD) based Continuum Damage Mechanics (CDM) material model. The interlaminar delaminations were modeled using the cohesive contact formulation available within LS-DYNA, wherein the mixed-mode fracture is captured via the Benzegaggh-Kenane (B-K) mode-dependent fracture energy interpolation law. The above-mentioned modeling methods have mostly been applied to thermoset composites and adapting them to TPCs involves addressing challenges associated with appropriately representing material behavior. Therefore, the proposed paper would discuss the systematic approach taken to adapt thermoset composites modeling practices for applications to TPCs, while appropriately addressing material behavior. The proposed paper would show that the predicted back face center point deflection correlated reasonably well with experimental data and the peak deflection was predicted to be within 5% of the experimental measurements. The projectile rebound velocity, while predicted to be higher than the experimental measurement, was within reasonable bounds. Additionally, it will be shown that the predicted delamination shapes were in reasonable agreement with experimental data.

Composite Materials↗
NASA NTRS1999

Neural Networks Used to Compare Designed and Measured Time-Average Patterns

Electronic time-average holograms are convenient for comparing the measured vibration modes of fan blades with those calculated by finite-element models. At the NASA Lewis Research Center, neural networks recently were trained to perform what had been a simple visual comparison of the predictions of the design models with the measurements. Finite-element models were used to train neural networks to recognize damage and strain information encoded in subtle changes in the time-average patterns of cantilevers. But the design-grade finite element models were unable to train the neural networks to detect damage in complex blade shapes. The design-model-generated patterns simply did not agree well enough with the measured patterns. Instead, hybrid-training records, with measured time-average patterns as the input and model-generated strain information as the output, were used to effect successful training.

Decker, Arthur J.↗
NASA NTRS1974

Measurement of cosmic ray positron and negatron spectra between 50 and 800 MeV

A balloon-borne magnetic spectrometer was used to measure the spectra of cosmic ray positrons and negatrons at energies between 50 and 800 MeV. Comparisons of the separate positron and negatron spectra observed near the earth with their expected intensities in interstellar space can be used to investigate the complex (and variable) interaction of galactic cosmic rays with the expanding solar wind. The present measurements, which have established finite values or upper limits for the positron and negatron spectral between 50 and 800 MeV, have confirmed earlier evidence for the existence of a dominant component of negatrons from primary sources in the galaxy. The present results are shown to be consistent with the hypothesis that the positron component is in fact mainly attributable to collisions between cosmic ray nuclei and the interstellar gas. The estimate of the absolute intensities confirm the indications from neutron monitors that in 1972 the interplanetary cosmic ray intensities were already recovering toward their high levels observed in 1965.

Daugherty, J. K.↗
NASA NTRS1981

Modeling misregistration and related effects on multispectral classification

The effects of misregistration on the multispectral classification accuracy when the scene registration accuracy is relaxed from 0.3 to 0.5 pixel are investigated. Noise, class separability, spatial transient response, and field size are considered simultaneously with misregistration in their effects on accuracy. Any noise due to the scene, sensor, or to the analog/digital conversion, causes a finite fraction of the measurements to fall outside of the classification limits, even within nominally uniform fields. Misregistration causes field borders in a given band or set of bands to be closer than expected to a given pixel, causing additional pixels to be misclassified due to the mixture of materials in the pixel. Simplified first order models of the various effects are presented, and are used to estimate the performance to be expected.

Billingsley, F. C.↗
NASA NTRS1981

Techniques for prediction of large nonanalytic reflector antenna performance

Projected spacecraft missions for communications, radio astronomy and earth observations indicate a need for very large (on the order of 100 meters) space deployable or erectable antennas. This paper discusses a numerical method of analyzing reflector characteristics which is applicable to large reflector antennas whose surfaces are subject to mechanical and thermal distortions as well as fabrication and deployment errors. A technique of describing nonanalytic surface configurations by a finite number of known (measured) points was successfully applied in a computer model to predict the RF radiation pattern of a reflector using aperture plane integration techniques. The accuracy of the results is shown to be both a function of the number of measured points used and of their distribution.

Moskowitz, S. M.↗
NASA NTRS1981

Finite sun effect on the interpretation of solar aureole

Although it is usually assumed that solar radiation falls on the earth's atmosphere in the form of plane waves, the finite angular size of the solar disk contradicts this assumption. For most purposes, this finite sun effect on computed or measured radiation quantities is negligible. However, in the region of the solar aureole, which is dominated by aerosol diffraction scattering, measurable effects may be obtained. In this paper, we show that the finite sun effect is related to derivatives of the scattering phase function and that a 1% effect may be obtained close to the sun if enough large particles are present in the atmosphere.

Box, M. A.↗
NASA NTRS1982

Recent sidewall boundary-layer investigations with suction in the Langley 0.3-m Transonic Cryogenic Tunnel

An experimental and theoretical study of the Langley 0.3-m Transonic Cryogenic Tunnel (TCT) sidewall boundary-layer with and without suction, has been made. Without suction, the boundary-layer displacement thickness at a station ahead of the model varied from about 1.6 mm to 1.3 mm over a Reynolds number range of 20 million to 200 million per m at Mach numbers from 0.30 to 0.76. Measured velocity profiles were correlated using the defect law of Hama. The boundary-layer displacement thickness decreased when suction was applied; however, after suction of about 2 percent of test section mass flow, the change in the thickness was small. A comparison of the measured suction effectiveness with finite difference and integral methods of boundary-layer calculation showed that both methods predicted the right trend over the range of suction velocities (up to a suction to free-stream velocity ratio of -0.02).

Murthy, A. V.↗
NASA NTRS1980

Design of a recursive vector processor using polynomial splines

The problem of obtaining smoothed estimates of function values, particularly their derivatives, from a finite set of inaccurate measurements is considered. A recursive two-dimensional vector processor is introduced as an approximation to the nonrecursive constrained least-squares estimation. Here, piecewise bicubic Hermite polynomials are extensively used as approximating functions, and the smoothing integral is converted to a discrete quadratic form. This makes it possible to convert the problem of fitting an approximating function to one of estimating the function values and derivatives at the nodes.

Kim, C. S.↗
NASA NTRS1982

Development of computer models for the prediction of large distorted antenna characteristics

A program for calculating the radiation patterns of analytic reflector antennas, using geometric optics and aperture plane integration techniques, was modified and extended to include nonanalytic surfaces. The original program, while capable of predicting patterns for a variety of reflectors, both smooth and multipanelled, was subject to the restriction that the surface had to be expressed analytically, i.e., described by a set of mathematical equations. This restriction was removed by adapting a technique which allows the reflector configuration to be interpolated from a finite set of points measured on the surface. Criteria for choosing both the number and distribution of these measured surface points were developed by comparing the predicted antenna radiation patterns with measured laboratory results. Test cases involved relatively smooth as well as grossly distorted arbitrary surfaces. Finally, surface point accuracies were established by applying random error analysis to the measurement process.

Moskowitz, S. M.↗
NASA NTRS1982

Remote sensing of temperature profiles in the atmosphere

Methods of regularized and generalized cross validation can be used to estimate the atmosphere's temperature, moisture, and wind structure from a finite number m noisy measurements by meteorological satellites on the intensity of upwelling radiation in selected channel frequencies. The inversion of the equation of radiative transfer is discussed for data obtained by TIROS N satellite.

Osullivan, F.↗
NASA NTRS1987

Scattering models for some vegetation samples

The Helmholtz integral equation is presently derived for a scatterer of arbitrary shape, and reduced in order to obtain the far zone-scattered field in terms of the field within the scatterer. Attention is given to the effect of different approaches to field estimation within the scatterer on the backscattering cross section, as illustrated numerically by the cases of a circular disk, a needle, and a finite-length cylinder. A comparison is made of the results obtained by modeling a leaf by means of a circular disk within the Shifrin approximation, and a tree branch by means of a finite-length cylinder, with measurements from a single leaf and a single branch.

Karam, M. A.↗
NASA NTRS1987

Thermal diffusive conductivity of dilute superfluid (He-3)-(He-4) mixtures

A new technique is described for measuring the effective thermal conductivity of superfluid (He-3)-(He-4) mixtures. The results confirm the large departures from hydrodynamic theory reported previously. The analysis suggests that the measured conductivity is the finite thermal diffusive conductivity of superfluid helium in the absence of counterflow. This conductivity need not diverge in the limit of small He-3 concentration.

Chui, T. C. P.↗
NASA NTRS2006

MARSIS antenna flight deployment anomaly and resolution

This paper summarizes the resolution of an in flight anomaly that occurred during the deployment of the first of three MARSIS antenna booms. Characteristics of this deployment are described, along with a correlation to finite element models and measured spacecraft inertias, which allowed the intermediate state of the boom to be accurately determined. Based on this information, a spacecraft maneuver was performed that warmed the stalled hinge and led to the first boom successfully locking into its designed geometry. The confirmed partially deployed boom shape was then used to develop a thermal model of the stalled hinge both in its initial solar attitude and during the successful spacecraft maneuver. Results from the hinge thermal model and component level testing were evaluated in order to determine the root cause of the anomaly and the probability of its recurrence on subsequent deployments. These conclusions were then utilized in planning mitigating actions that were implemented during the remaining two boom deployments. Final flight data are presented for both dipole booms indicating a correctly deployed and healthy antenna. The monopole boom deployment was detected but the final state of the boom is unknown.

Mars↗