SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cobalt( ii ) ions were adsorbed to the surface of rod-shape anatase TiO 2 nanocrystals and subsequently heated to promote ion diffusion into the nanocrystal.
Anion-exchange membranes (AEMs) with high anion/cation selectivity and exceptional proton-blocking ability are critical for applications such as bipolar membrane electrodialysis and electrochemical acid recovery. However, existing AEMs are constrained by a trade-off between ionic conductivity and selectivity, largely due to the intrinsic coupling between charge density and water content, and they suffer from excessive proton leakage facilitated by the Grotthuss hopping mechanism. In this work, poly(vinylimidazolium) membranes functionalized with long alkyl side chains that self-assemble into well-defined microphase-separated morphologies stabilized by hydrophobic and electrostatic interactions are reported. These unique structures localize the charge density along the polymer backbone to promote fast and selective ion transport. As a result, these membranes exhibit ionic conductivities and counter-ion diffusivities surpassing those of conventional homogeneous membranes, along with unprecedented counter-ion/co-ion selectivity and proton-blocking ability. These results establish a new design paradigm for high-performance, phase separated charged polymer membranes that overcome the limitations of homogeneous membranes, with broad implications for advanced electrochemical technologies.
Lithium metal batteries offer superior volumetric and gravimetric specific capacities compared to those based on traditional graphite anodes. Although advancements in solid-state electrolytes address safety concerns, challenges remain, particularly regarding interphase formation in lithium metal anodes. This work presents a computational framework based on high-throughput first-principles density functional theory and machine-learning interatomic potentials (MLIPs) including automated iterative, active learning to enable robust computational exploration of interphase formation between lithium metal anodes and an inorganic solid-state electrolyte. As a demonstration, we apply the framework to a Li/Li7P3S11 interface and find that it accurately identifies the experimentally observed, thermodynamically stable interphase products as well as their overall spatial arrangement within a heterogeneous, amorphous layered structure, with Li2S domains of nanocrystallinity. Our simulations show two stages, a fast and slow diffusion reaction regime, that corroborate the relative phase formation rate of Li x P, Li2S, and Li3P. Using the Onsager transport theory, we capture time-dependent ionic diffusion within the reacting interface, including cross-correlation effects. We found that cross-correlation effects between Li-P and P-S ionic motion significantly influence P-ion diffusion, making it highly sensitive to the local environment and potentially leading to "kinetic trapping" of Li-P phases. The passivation of the interface is shown as the ionic fluxes all approach zero, effectively halting interphase growth.
Single-ion conducting (SIC) polymer electrolytes with a high Li transference number ( t Li + ) have shown the capability to enable enhanced battery performance and safety by avoiding liquid–electrolyte leakage and suppressing Li dendrite formation. However, issues of insufficient ionic conductivity, low electrochemical stability, and poor polymer/electrode interfacial contact have greatly hindered their commercial use. In this work, a Li-containing boron-centered fluorinated SIC polymer gel electrolyte (LiBFSIE) was rationally designed to achieve a high t Li + and high electrochemical stability. Owing to the low dissociation energy of the boron-centered anion and Li + , the as-prepared LiBFSIE exhibited an ionic conductivity of 2 × 10 –4 S/cm at 35 °C, which is exclusively contributed by Li ions owing to a high t Li + of 0.93. Both simulation and experimental approaches were applied to investigate the ion diffusion and concentration gradient in the LiBFSIE and non-cross-linked dual-ion systems. Typical rectangular Li stripping/plating voltage profiles demonstrated the uniform Li deposition assisted by LiBFSIE. The interfacial contact and electrolyte infiltration were further optimized with an in situ UV–vis-initiated polymerization method together with the electrode materials. By virtue of the high electrochemical stability of LiBFSIE, the cells achieved a promising average Coulombic efficiency of 99.95% over 200 cycles, which is higher than that of liquid–electrolyte-based cells. No obvious capacity fading was observed, indicating the long-term stability of LiBFSIE for lithium metal batteries.
We report a new ion conductor—Na 11 Sn 2 SbSe 12 —as a possible candidate for a solid catholyte in composite cathodes for all-solid state Na-batteries, which exhibits a room temperature ionic conductivity of 0.15 ± 0.03 mS cm −1 and an activation energy of 0.39 ± 0.02 eV. The sulfide solid solutions of Na 11 Sn 2 SbSe 12 , namely, Na 11 Sn 2 SbS 12−x Se x (x = 1 and 6), were also investigated through a combination of Rietveld refinement against powder x-ray diffraction data and electrochemical impedance spectroscopy to reveal the complex structure–property relationships governing ion transport in this class of materials. Meanwhile, broadening of the Na-ion diffusion pathways in Na 11 Sn 2 SbSe 12 is expected to facilitate Na-ion transport compared to the sulfide-rich member of the solid solution, the opposite holds: increasing the Se fraction in Na 11 Sn 2 SbS 12−x Se x leads to a little change in the activation energy but a reduction in the ionic conductivity. We ascribe this to the lowering of the prefactor, σ 0 , in the Arrhenius relationship with increasing lattice “softening” as a function of higher Se content.
We have used coarse-grained molecular dynamics simulations to understand the effect of cation size on ion diffusion in polymerized ionic liquids at temperatures well above the glass transition temperature of the polymers. We investigated dependencies of the diffusion constant on the cation radius and static dielectric constant and interpreted these results in terms of underlying structural changes, and decoupling phenomenon. We have found non-monotonic effects of the cation radius on the diffusion constant, with a maximum at an intermediate radius resulting from two different size dependent effects. Changes in the radial distribution functions characterizing spatial distribution of cations with respect to anions result in a monotonic increase in the coordination number. This yields an increase in the effective interaction energy as a function of cation radius, which can explain the decrease in the diffusion constant. This increase is counteracted at small cation radii by a corresponding increase in decoupling of cation and anion dynamics. In addition, the diffusion constant is found to increase on increasing the static dielectric constant for all radii of the cations. These results highlight the significant role of decoupling in designing polymerized ionic liquids with an enhanced diffusion constant of cations.
Non-equilibrium defects often dictate the macroscopic properties of materials. They largely define the reversibility and kinetics of processes in intercalation hosts in rechargeable batteries. Recently, imaging methods have demonstrated that transient dislocations briefly appear in intercalation hosts during ion diffusion. Despite new discoveries, the understanding of impact, formation and self-healing mechanisms of transient defects, including and beyond dislocations, is lacking. Here, operando X-ray Bragg Coherent Diffractive Imaging (BCDI) and diffraction peak analysis capture the stages of formation of a unique metastable domain boundary, defect self-healing, and resolve the local impact of defects on ionic diffusion in Na x Ni 1-y MnyO 2 intercalation hosts in a charging sodium-ion battery. Results, applicable to a wide range of layered intercalation materials due to the shared nature of framework layers, elucidate new dynamics of transient defects and their connection to macroscopic properties, and suggest how to control the nanostructure dynamics.
Abstract Rechargeable multivalent‐ion batteries are attractive alternatives to Li‐ion batteries to mitigate their issues with metal resources and metal anodes. However, many challenges remain before they can be practically used due to the low solid‐state mobility of multivalent ions. In this study, a promising material identified by high‐throughput computational screening is investigated, ε‐VOPO 4 , as a Mg cathode. The experimental and computational evaluation of ε‐VOPO 4 suggests that it may provide an energy density of >200 Wh kg −1 based on the average voltage of a complete cycle, significantly more than that of well‐known Chevrel compounds. Furthermore, this study finds that Mg‐ion diffusion can be enhanced by co‐intercalation of Li or Na, pointing at interesting correlation dynamics of slow and fast ions.
The main objective of this project is to synthesize titanium niobium oxide (TNO) that has a nanoporous structure with porous channels for rapid lithium diffusion, enabling extreme fast charging (XFC). The focus of this project is to improve the electronic conductivity and ion diffusion coefficient in TNO to achieve high capacities under extreme fast charge conditions. In addition, electrolytes with additives will be formulated to promote stable interphase formation on the NMC cathode surface to improve long cycling stability.
Light-weighting vehicular components through adoption of light-metal structural alloys holds promise for reducing the fuel consumption of internal combustion engine vehicles and increasing the range of battery electric vehicles. However, the alloyed microstructure and surface precipitates of aluminum alloys render these materials susceptible to corrosion under modest excursions from neutral pH. Traditional chromium-based anodic passivation layers are subject to increasingly stringent environmental regulations, whereas options for sacrificial cathodic films are sparse for electropositive metals. While hybrid nanocomposite coatings have shown initial promise, mechanistic underpinnings remain poorly understood. Here, a fully imidized polyetherimide (PEI) resin is utilized as the continuous phase with inclusion of unfunctionalized exfoliated graphite (UFG). A comprehensive investigation of the mechanisms of corrosion protection reveals key fundamental design principles underpinning corrosion inhibition. First, strong interfacial adhesion, which for PEI is facilitated by binding of imide carbonyl moieties to Lewis acidic sites on Al surfaces. Second, the miscibility of ion-impervious nanoscopic UFG fillers and stabilization of a substantial interphase region at UFG/PEI boundaries that result in minimizing the free volume at the filler/polymer interface. Finally, extended tortuosity of ion diffusion pathways imbued by the below-percolation-threshold 2D fillers. These three design principles help govern and modulate ion transport from electrolyte/coating interfaces to the coating/metal interface and are crucial for the extended preservation of barrier properties. The results suggest an approach to systematically activate multiple modes of corrosion inhibition through rational design of hybrid nanocomposite coatings across hard-to-abate sectors where light metal alloys are likely to play an increasingly prominent role.
Both Li3BO3 and Li3BN2 materials have promising properties for use in all-solid-state batteries and other technologies dependent on electrolytes with significant ionic conductivity. As the first of a two-part study, this paper reports the analysis of detailed simulations of Li ion diffusion in the monoclinic forms of these materials. Using both NEB and MD methods, it is clear that Li ion migration via vacancy mechanisms provides the most efficient ion transport in each material. While the results suggest that interstitial defects in these materials do not play a direct role in Li ion migration, their relative stability seems to enhance vacancy production via the formation of Frenkel-type defects. This may partially explain why the Li ion conductivities computed from MD simulations of samples initially containing a single Li ion vacancy are in reasonable agreement with measured values of this work for Li3BO3 and those reported in the literature for poorly crystalline samples of both materials. The possibility of increasing vacancy concentrations by substitutional doping (F for O in Li3BO3 and C for B in Li3BN2) is also examined, finding simulated conductivities comparable to those of the ideal vacancy model.
Abstract The LiTaCl 6 solid electrolyte has the lowest activation energy of ionic conduction at ambient conditions (0.165 eV), with a record high ionic conductivity for a ternary compound (11 mS cm −1 ). However, the mechanism has been unclear. We train machine‐learning force fields (MLFF) on ab initio molecular dynamics (AIMD) data on‐the‐fly and perform MLFF MD simulations of AIMD quality up to the nanosecond scale at the experimental temperatures, which allows us to predict accurate activation energy for Li‐ion diffusion (at 0.164 eV). Detailed analyses of trajectories and vibrational density of states show that the large‐amplitude vibrations of Cl − ions in TaCl 6 − enable the fast Li‐ion transport by allowing dynamic breaking and reforming of Li−Cl bonds across the space in between the TaCl 6 − octahedra. We term this process the dynamic‐monkey‐bar mechanism of superionic Li + transport which could aid the development of new solid electrolytes for all‐solid‐state lithium batteries.
Abstract Coupling a high-performance core to a low heat flux divertor is a crucial step for ITER and a Fusion Pilot Plant or DEMO. Experiments in DIII-D recently expanded the steady-state hybrid scenario to high density and divertor impurity injection to study the feasibility of a radiating mantle solution. This work presents the physics basis for trade-offs between density, current drive and stability to tearing modes (TMs) at high β. EC power is crucial to tailor the plasma profiles into a passively stable state, and to eject impurities from the core. Off-axis EC depositions decrease the heating efficiency, but calculated electron heat transport coefficients show that this effect is partially mitigated by improved confinement inside the EC deposition. Additionally, the reduction in pressure is recovered by increasing the density. This favourable scaling of confinement with density was observed in high power plasmas for years, and this work provides a comprehensive explanation. ELITE predictions indicate that a path in peeling-ballooning stability opens up for certain conditions of density, power, q 95 and shaping, allowing the edge pressure to continue increasing without encountering a limit. In the core, calculated anomalous fast-ion diffusion coefficients are consistent with density fluctuation measurements in the toroidicity-induced Alfvén eigenmode range, showing that smaller fast-ion losses contribute to the enhanced confinement at high density. The edge integration study shows that divertor heat loads can be reduced with Ne and Ar injection, but this eventually triggers a cascade of n = 1, 2, 3 core TMs. We can now show that impurity radiation in the core is small and it is not the cause for the drop in confinement at high Ar and Ne injection rates. The overlap between the core TMs is consistent with the loss of pressure as estimated by the Belt model for the coupled rational surfaces. Optimization of these trade-offs has achieved plasmas with sustained H 98y2 = 1.7, f GW = 0.7 and ∼85% mantle radiation. The scenario and its variations at higher density and on- vs off-axis EC heating has been studied as a candidate for an integrated solution for several reactor designs, such as ITER, ARC, and the ARIES-ACT1 case, showing promising results in terms of fusion power and gain.
Here, the LiTaCl 6 solid electrolyte has the lowest activation energy of ionic conduction at ambient conditions (0.165 eV), with a record high ionic conductivity for a ternary compound (11 mS cm –1 ). However, the mechanism has been unclear. We train machine-learning force fields (MLFF) on ab initio molecular dynamics (AIMD) data on-the-fly and perform MLFF MD simulations of AIMD quality up to the nanosecond scale at the experimental temperatures, which allows us to predict accurate activation energy for Li-ion diffusion (at 0.164 eV). Detailed analyses of trajectories and vibrational density of states show that the large-amplitude vibrations of Cl – ions in TaCl 6 – enable the fast Li-ion transport by allowing dynamic breaking and reforming of Li–Cl bonds across the space in between the TaCl 6 – octahedra. We term this process the dynamic-monkey-bar mechanism of superionic Li + transport which could aid the development of new solid electrolytes for all-solid-state lithium batteries.
Ion implantation emerges as a promising technique to address the persistent challenge of lithium (Li) filament growth in solid-state electrolytes as it can induce compressive stresses inhibiting crack growth and deflect dendrites, de facto mitigating early electrolyte failure. In this study, we examine the potential paradox of ion implantation: while aiming to enhance electrolyte performance, the radiation damage associated with implantation might inadvertently compromise both the ionic conductivity and the intrinsic fracture toughness of the material, rendering the material unsuitable for battery applications. Specifically, we employed molecular dynamics simulations to examine the scope of the downsides of ion implantation, specifically: (i) reduced ionic conductivity (due to radiation-induced amorphization) and (ii) mechanical stability (due to radiation-induced embrittlement) in ion-implanted Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolytes. We explore how radiation damage impacts LLZO’s crystalline structure, Li-ion diffusion, and fracture properties at various temperatures and radiation damage levels. The study aims to provide insights into the competing effects of ion implantation and suggest potential engineering strategies for developing more robust solid-state electrolytes with improved conductivity and dendrite resistance.
Despite significant interest toward solid-state electrolytes owing to their superior safety in comparison to liquid-based electrolytes, sluggish ion diffusion and high interfacial resistance limit their application in durable and high-power density batteries. Here, a novel quasi-solid Li + ion conductive nanocomposite polymer electrolyte containing black phosphorous (BP) nanosheets is reported. The developed electrolyte is successfully cycled against Li metal (over 550 h cycling) at 1 mA cm -2 at room temperature. The cycling overpotential is dropped by 75% in comparison to BP-free polymer composite electrolyte indicating lower interfacial resistance at the electrode/electrolyte interfaces. Molecular dynamics simulations reveal that the coordination number of Li + ions around (trifluoromethanesulfonyl)imide (TFSI - ) pairs and ethylene-oxide chains decreases at the Li metal/electrolyte interface, which facilitates the Li + transport through the polymer host. Here, density functional theory calculations confirm that the adsorption of the LiTFSI molecules at the BP surface leads to the weakening of N and Li atomic bonding and enhances the dissociation of Li + ions. This work offers a new potential mechanism to tune the bulk and interfacial ionic conductivity of solid-state electrolytes that may lead to a new generation of lithium polymer batteries with high ionic conduction kinetics and stable long-life cycling.
A facile freeze tape casting (FTC) strategy is utilized to prepare bilayered 4 mAh cm –2 high-loading LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathodes. The bottom layer is a conventional nonaqueous electrode, which has a dense structure for high-energy purposes. Further, the top layer is prepared by the proposed FTC, exhibiting a porous feature for high-power requirement. With the assistance of FTC, the bilayered electrodes successfully deliver enhanced rate and cyclic performance due to the improved lithium-ion diffusion kinetics and pathways. Therefore, the proposed FTC strategy and its delivered electrodes are promising for energy- and power-density lithium-ion batteries, potentially enlightening the research and development of lithium-ion battery manufacturing.
The Multi-Mode Model (MMM) for turbulent transport was applied to a large set of well-analyzed discharges from the National Spherical Torus Experiment (NSTX) in order to evaluate its sensitivities to a wide range of plasma conditions. MMM calculations were performed for hundreds of milliseconds in each discharge by performing time-dependent predictive simulations with the 1.5D tokamak integrated modeling code TRANSP. A closely related study (Lestz et al 2025 Plasma Phys. Control. Fusion 67 105029) concluded that MMM predicted electron and ion temperature profiles that were in reasonable agreement with NSTX observations, generally outperforming a different reduced transport model, TGLF. This finding motivates the more thorough investigation of the characteristics of the MMM predictions conducted in this work. The simulations with MMM have electron energy transport dominated by electron temperature gradient modes in the examined discharges with relatively low plasma β (ratio of kinetic plasma pressure to magnetic field pressure) and high collisionality, transitioning to a mixture of different modes for higher β and lower collisionality. The thermal ion diffusivity predicted by MMM is much smaller than the neoclassical contribution, in line with previous experimental analysis of NSTX. Nonetheless, the electron and ion temperature profiles are coupled via collisional energy exchange and thus sensitive to which transport channels are predicted. The time-dependent simulations with MMM are robust to the simulation start time, converging to remarkably similar temperature profiles later during the discharge. MMM typically overpredicts confinement relative to NSTX observations, leading to the prediction of overly steep temperature profiles. Plasmas with spatially broader temperature profiles, higher plasma β, and longer energy confinement times tend to be predicted by MMM with better agreement with the experiment. As a result, these findings provide useful context for understanding the regime-dependent tendencies of MMM in anticipation of self-consistent, time-dependent predictive simulations of NSTX-U discharges with these same modeling tools.