Search NASA⌕ Search

SEARCH · Search NASA

Results for “low dimensional magnets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Local imaging of diamagnetism in proximity-coupled niobium nanoisland arrays on gold thin films.

In this work, we study the effect of engineered disorder on the local magnetic response of proximity-coupled superconducting island arrays by comparing scanning superconducting quantum interference device (SQUID) susceptibility measurements to a model in which we treat the system as a network of one-dimensional (1D) superconductor-normal-metal-superconductor Josephson junctions, each with a Josephson coupling energy E-J determined by the junction length or distance between islands. We find that the disordered arrays exhibit a spatially inhomogeneous diamagnetic response which, for low local applied magnetic fields, is well described by this junction network model, and we discuss these results as they relate to inhomogeneous 2D superconductors. Our model of the static magnetic response of the arrays does not fully capture the onset of nonlinearity and dissipation with increasing applied field, as these effects are associated with vortex motion due to the dynamic nature of the scanning SQUID susceptometry measurement. This work demonstrates a model 2D superconducting system with engineered disorder, and it highlights the impact of dissipation on the local magnetic properties of 2D superconductors and Josephson junction arrays.

Bishop-Van Horn, Logan↗

Slow spin dynamics in the hyperhoneycomb lattice [ ( C 2 H 5 ) 3 NH ] 2 Cu 2 ( C 2 O 4 ) 3 revealed by H 1 NMR studies

We report the results of magnetic susceptibility χ and H 1 nuclear magnetic resonance (NMR) measurements on a three-dimensional hyperhoneycomb lattice compound [ ( C 2 H 5 ) 3 NH ] 2 Cu 2 ( C 2 O 4 ) 3 (CCCO). The average value of the antiferromagnetic (AFM) exchange coupling between the Cu 2 + ( S = 1 / 2 ) spins was determined to be J ~ 50 K from the χ measurements. No long-range magnetic ordering has been observed down to T = 50 mK, although NMR lines become slightly broader at low temperatures below 1 K. The broadening of the NMR spectrum observed below 1 K reveals that the Cu spin moments remain at this temperature, suggesting a non-spin-singlet ground state. The temperature and magnetic field dependence of 1 / T 1 at temperatures above 20 K is well explained by paramagnetic thermal spin fluctuations where the fluctuation frequency of Cu 2 + spins is higher than the NMR frequency of the order of megahertz. However, a clear signature of the slowing down of the Cu 2 + spin fluctuations was observed at low temperatures where 1 / T 1 shows a thermally activated behavior. The magnetic field dependence of the magnitude of the spin excitation gap suggests that the magnetic behaviors of CCCO are characterized as an AFM chain at low temperatures.

1-dimensional systems↗

Recent progress in realizing novel one-dimensional polymorphs via nanotube encapsulation

Encapsulation of various materials inside nanotubes has emerged as an effective method in nanotechnology that facilitates the formation of novel one-dimensional (1D) structures and enhances their functionality. Because of the effects of geometrical confinement and electronic interactions with host nanotubes, encapsulated materials often exhibit low-dimensional polymorphic structures that differ from their bulk forms. These polymorphs exhibit unique properties, including altered electrical, optical, and magnetic behaviors, making them promising candidates for applications in electronics, energy storage, spintronics, and quantum devices. This review explores recent advancements in the encapsulation of a wide range of materials such as organic molecules, elemental substances, metal halides, metal chalcogenides, and other complex compounds. In particular, we focus on novel polymorphs formed through the geometrical confinement effect within the nanotubes. The atomic structure, other key properties, and potential applications of these encapsulated materials are discussed, highlighting the impact of nanotube encapsulation on their functionalities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design and Validation of a Cryogenic Dilatometer

This project focuses on the design and development of a cryogenic dilatometer capable of measuring the thermal expansion of materials at extremely low temperatures. Understanding how materials change dimension with temperature is critical for applications involving cryogenic environments, particularly laminated systems housing superconducting magnets, where small dimensional changes can significantly affect performance and reliability. To address this, a dilatometer system was designed to operate within a liquid nitrogen environment while accurately measuring displacements caused by thermal contraction. The purpose of this device is to determine the coefficient of thermal expansion (CTE) of a material. The design process involved defining functional requirements, developing mechanical and thermal concepts for the measurement apparatus, selecting appropriate materials compatible with cryogenic temperatures, and integrating sensors capable of detecting small dimensional changes. The resulting system aims to provide a practical and repeatable method for evaluating material thermal expansion at cryogenic temperatures, supporting research into composite use in superconducting applications that require accurate characterization of material behavior in low-temperature environments.

Schmitt, Nicholas [Northern Illinois U.]↗

Manipulation of the Magnetoresistance by Strain in Topological TaSe 3

1D TaSe 3 exhibits many unusual physical properties due to its distorted type-II chains. Ribbon-shaped single crystals can be easily bended along the $b-axis$, forming rings. This study investigates the magnetoresistance (MR) of TaSe 3 up to 60 T in both unbended (ribbon shape) and ring-shaped (bended ribbon) samples. Notable changes are found in the magnetotransport properties between the two different shaped samples. One is that the MR in ring-shaped samples is three orders lower than that in unbended samples under the same sample environment. In addition, linear MR is observed above ≈20 T in ring-shaped samples when the magnetic field is parallel or perpendicular to the rings. Quantum oscillations are also observed as a function of the magnetic field when the magnetic field is applied parallel to rings, possibly due to the Altshuler–Aronov–Spivak effect or the inversion of the lowest Landau level beyond the quantum limit. All these results are related to strain-induced electronic structure change in TaSe 3 , an effective way to tune physical properties in low-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spiroligomer‐Based Macrocycles for Atomically Precise Membranes

Abstract Here, we report a new class of peptidomimetic macrocycles with well‐defined three‐dimensional structures and low conformational flexibility. They are assembled from fused‐ring spiro‐ladder oligomers (spiroligomers) by modular solid‐phase synthesis. Two‐dimensional nuclear magnetic resonance confirms their shape persistency. Triangular macrocycles of tunable sizes assemble into membranes with atomically precise pores, which exhibit size and shape‐dependent molecular sieving towards a series of structurally similar compounds. The exceptional structural diversity and stability of spiroligomer‐based macrocycles will be explored for more applications.

Xie, Yihui↗

Spiroligomer‐Based Macrocycles for Atomically Precise Membranes

Abstract Here, we report a new class of peptidomimetic macrocycles with well‐defined three‐dimensional structures and low conformational flexibility. They are assembled from fused‐ring spiro‐ladder oligomers (spiroligomers) by modular solid‐phase synthesis. Two‐dimensional nuclear magnetic resonance confirms their shape persistency. Triangular macrocycles of tunable sizes assemble into membranes with atomically precise pores, which exhibit size and shape‐dependent molecular sieving towards a series of structurally similar compounds. The exceptional structural diversity and stability of spiroligomer‐based macrocycles will be explored for more applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and physical properties of a new layered ferromagnet Cr 1.21 Te 2

Single crystals of a new layered compound, Cr 1.21 Te 2 , were synthesized via a vapor transport method. The crystal structure and physical properties were characterized by single crystal and powder x-ray diffraction, temperature- and field-dependent magnetization, zero-field heat capacity, and angle-resolved photoemission spectroscopy. Cr 1.21 Te 2 , containing two Cr sites, crystalizes in a trigonal structure with a space group P-3 (No. 147). The Cr site in the interstitial layer is partially occupied. Physical property characterizations indicate that Cr 1.21 Te 2 is metallic with hole pockets at the Fermi energy and undergoes a ferromagnetic phase transition at ~ 173 K. The magnetic moments align along the c axis in the ferromagnetic state. Based on low-temperature magnetization, the spin stiffness constant, D, and spin excitation gap, Δ , were estimated according to Bloch's law to be D = 94 ± 17 meV Å 2 and Δ = 0.45 ± 0.33 meV, suggesting its possible application as a low dimensional ferromagnet.

36 MATERIALS SCIENCE↗

Electronic and magnetic properties of quasi-one-dimensional osmium halide OsCl 4

Using ab initio density functional theory, we study the electronic and magnetic properties of the van der Waals chain material OsCl 4 . In the nonmagnetic state, a strongly anisotropic band structure was observed, in agreement with its anticipated one-dimensional crystal geometry. Based on Wannier functions, we found that the four electrons of the 5d Os atom form a low-spin S = 1 state, with a large crystal field between the d xz/yz and d xy orbitals, corresponding to a strong Jahn–Teller distortion (Q 3 < 0). As a consequence, the magnetic properties are mainly contributed by the d xz/yz states. Furthermore, when a Mott gap develops after the introduction of the Hubbard U and Hund coupling J, we found that the staggered spin order is the most likely magnetic state, namely, spins arranged as (↑-↓-↑-↓) with π wavevector along the chain. In addition, the energy differences between various spin states are small, suggesting a weak magnetic exchange coupling along the chain. Overall, our results provide guidance to experimentalists and theorists working on quasi-one-dimensional osmium halides chain materials.

36 MATERIALS SCIENCE↗

High-temperature quantum valley Hall effect with quantized resistance and a topological switch

Edge states of a topological insulator can be used to explore fundamental science emerging at the interface of low dimensionality and topology. Achieving a robust conductance quantization, however, has proven challenging for helical edge states. In this work, we show wide resistance plateaus in kink states—a manifestation of the quantum valley Hall effect in Bernal bilayer graphene—quantized to the predicted value at zero magnetic field. The plateau resistance has a very weak temperature dependence up to 50 kelvin and is flat within a dc bias window of tens of millivolts. We demonstrate the electrical operation of a topology-controlled switch with an on/off ratio of 200. These results demonstrate the robustness and tunability of the kink states and its promise in constructing electron quantum optics devices.

Science & Technology - Other Topics↗

Shubnikov–de Haas oscillations reaching the quantum limit in two-dimensional electron systems at SrTi⁢O 3 (111) interfaces

Transition metal oxides in the (111) orientation have been predicted to harbor topological phases and unconventional quantum states because of their hexagonal crystal symmetry and strong interactions between charge, spin, and orbital degrees of freedom. We report Shubnikov–de Haas oscillations into the quantum limit at magnetic fields up to 35 T in high-mobility (>20 000 c⁢m 2 V −1 s −1 ) two-dimensional electron liquids at (111)-oriented SrTi⁢O 3 interfaces with controllable carrier densities. Spin splitting is observed at low Landau levels, which is attributed to the interplay between the Zeeman splitting and Rashba spin-orbit coupling according to our theoretical modeling, yielding Landé factor 𝑔 = 0.29 and Rashba coefficient 𝛼 = 0.6 meV nm. Furthermore, at high magnetic field after the system reaches the lowest Landau level, the temperature dependence of the resistance shows a metallic to insulating state transition with the magnetoresistance changing significantly from a primarily quadratic to a large linear field dependence.

Magnetoresistance↗

Bond-dependent anisotropy and magnon decay in cobalt-based Kitaev triangular antiferromagnet

Following tremendous success of the graphene-derived fundamental and applied research, the magnetic van der Waals materials that can be cleaved into monolayer two-dimensional atomic crystals have emerged as a new platform in the studies of low-dimensional physics and in the design of artificial heterostructures with novel properties. Because of that, the family of dihalides and trihalides of the 3d transition group receive a strong renewed interest. Together with our experimental collaborators, we have investigated the novel dynamical properties of one of such promising material CoI 2 , and demonstrated that spin excitations in it are prone to substantial breakdown and complex level repulsion, the important quantum effects whose theoretical understanding has been significantly advanced by our group in the last two decades. Both phenomena are dramatically revealed by experiments and verified by the theory in our joint study, published in Nature Physics. Altogether, our results pave the way toward a new research direction for the magnetic van der Waals materials.

36 MATERIALS SCIENCE↗

Three-Dimensional Helical-Rotating Plasma Structures in Beam-Generated Partially Magnetized Plasmas

Azimuthal structures emerging in beam-generated partially magnetized plasmas are investigated using three-dimensional particle in cell-Monte Carlo collision simulations. Two distinct instability regimes are identified at low pressures. Furthermore, when the gas pressure is sufficiently high, quasineutrality is attained and 2D spiral-arm structures form as a result of the development of a lower-hybrid instability, resulting in enhanced cross-field transport. At lower pressures, quasineutrality is not achieved and a 3D helical-rotating plasma structure forms due to development of the diocotron instability. Analytical formulas are proposed for the critical threshold pressure between these regimes and for the rotation frequency of the helical structures. Preliminary experimental verification is provided.

Penning discharges↗

Bicircular Light Floquet Engineering of Magnetic Symmetry and Topology and Its Application to the Dirac Semimetal Cd 3 As 2

Here, we show that bicircular light (BCL) is a versatile way to control magnetic symmetries and topology in materials. The electric field of BCL, which is a superposition of two circularly polarized light waves with frequencies that are integer multiples of each other, traces out a rose pattern in the polarization plane that can be chosen to break selective symmetries, including spatial inversion. Using a realistic low-energy model, we theoretically demonstrate that the three-dimensional Dirac semimetal Cd 3 As 2 is a promising platform for BCL Floquet engineering. Without strain, BCL irradiation induces a transition to a noncentrosymmetric magnetic Weyl semimetal phase with tunable energy separation between the Weyl nodes. In the presence of strain, we predict the emergence of a magnetic topological crystalline insulator with exotic unpinned surface Dirac states that are protected by a combination of twofold rotation and time reversal (2') and can be controlled by light.

36 MATERIALS SCIENCE↗

Elucidating proximity magnetism through polarized neutron reflectometry and machine learning

Polarized neutron reflectometry is a powerful technique to interrogate the structures of multilayered magnetic materials with depth sensitivity and nanometer resolution. However, reflectometry profiles often inhabit a complicated objective function landscape using traditional fitting methods, posing a significant challenge for parameter retrieval. In this work, we develop a data-driven framework to recover the sample parameters from polarized neutron reflectometry data with minimal user intervention. We train a variational autoencoder to map reflectometry profiles with moderate experimental noise to an interpretable, low-dimensional space from which sample parameters can be extracted with high resolution. We apply our method to recover the scattering length density profiles of the topological insulator–ferromagnetic insulator heterostructure Bi2Se3/EuS exhibiting proximity magnetism in good agreement with the results of conventional fitting. We further analyze a more challenging reflectometry profile of the topological insulator–antiferromagnet heterostructure (Bi,Sb)2Te3/Cr2O3 and identify possible interfacial proximity magnetism in this material. We anticipate that the framework developed here can be applied to resolve hidden interfacial phenomena in a broad range of layered systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Designing the stripe-ordered cuprate phase diagram through uniaxial-stress

The ability to efficiently control charge and spin in the cuprate high-temperature superconductors is crucial for fundamental research and underpins technological development. Here, we explore the tunability of magnetism, superconductivity and crystal structure in the stripe phase of the cuprate La 2-x Ba x CuO 4 , with x = 0.115 and 0.135, by employing temperature-dependent (down to 400 mK) muon-spin rotation and AC susceptibility, as well as X-ray scattering experiments under compressive uniaxial stress in the CuO 2 plane. A sixfold increase of the 3-dimensional (3D) superconducting critical temperature T c and a full recovery of the 3D phase coherence is observed in both samples with the application of extremely low uniaxial stress of 0.1 GPa. This finding demonstrates the removal of the well-known 1/8-anomaly of cuprates by uniaxial stress. On the other hand, the spin-stripe order temperature as well as the magnetic fraction at 400 mK show only a modest decrease under stress. Moreover, the onset temperatures of 3D superconductivity and spin-stripe order are very similar in the large stress regime. However, a substantial decrease of the magnetic volume fraction and a full suppression of the low-temperature tetragonal structure is found at elevated temperatures, which is a necessary condition for the development of the 3D superconducting phase with optimal T c . Our results evidence a remarkable cooperation between the long-range static spin-stripe order and the underlying crystalline order with the three-dimensional fully coherent superconductivity. Overall, these results suggest that the stripe- and the SC order may have a common physical mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Magnetic Genome of Two-Dimensional van der Waals Materials

Magnetism in two-dimensional (2D) van der Waals (vdW) materials has recently emerged as one of the most promising areas in condensed matter research, with many exciting emerging properties and significant potential for applications ranging from topological magnonics to low-power spintronics, quantum computing, and optical communications. In the brief time after their discovery, 2D magnets have blossomed into a rich area for investigation, where fundamental concepts in magnetism are challenged by the behavior of spins that can develop at the single layer limit. However, much effort is still needed in multiple fronts before 2D magnets can be routinely used for practical implementations. In this comprehensive review, prominent authors with expertise in complementary fields of 2D magnetism (i.e., synthesis, device engineering, magneto-optics, imaging, transport, mechanics, spin excitations, and theory and simulations) have joined together to provide a genome of current knowledge and a guideline for future developments in 2D magnetic materials research.

36 MATERIALS SCIENCE↗

X-ray Studies of the CDW Ground State and Excitations in High- T C Cuprates

We report charge density wave (CDW) in high-T C cuprates has drawn a lot of attention in the field. In this article, we review some of our recent x-ray studies about the ground state and the excitation spectrum of the CDW. Using high magnetic field to suppress the superconductivity, a three-dimensionally-ordered charge stripe state emerges in YBa 2 Cu 3 O 6+x at low temperatures, which arguably bears the characteristics of the CDW ground state. Regarding excitation spectrum, we utilized the state-of-the-art soft x-ray resonant inelastic scattering (RIXS) and found signatures of dispersive CDW excitations which manifest as some form of interference with the RIXS phonon excitations. This observation provides a new perspective to study the relationship between the CDW, the superconductivity and the putative quantum criticality inside the superconducting dome of the cuprate phase diagram. Within this context, relevant recent experimental studies are also briefly discussed.

36 MATERIALS SCIENCE↗