Search NASA⌕ Search

SEARCH · Search NASA

Results for “magnetism in solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Observing the three-dimensional dynamics of supported metal complexes

Dynamics are intricately linked with activity and selectivity when it comes to catalysis, as noted for instance in the enzymatic principles of induced fit and allostery, and yet the range of motions heterogeneous catalytic sites are able to undergo is poorly understood. Solid-state nuclear magnetic resonance (NMR) spectroscopy is perhaps the only tool capable of probing the rapid conformational dynamics found in heterogeneous catalysts but has historically been restricted by its low sensitivity, limiting the detail with which structures can be resolved. In this work, we apply solid-state NMR and dynamic nuclear polarization, in combination with density functional theory modeling, to reveal the high-resolution structure and motional freedom of a scandium supported complex in three dimensions. The results are contrasted with the study of the analogous homoleptic complex in the crystalline state, highlighting the impacts that surface structure may have on the dynamics of supported complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Facile Synthesis of Oxyhydrides by Reaction with NaBH 4 in an Open System

Oxyhydrides are an intriguing class of materials in which there is partial replacement of the oxide ion with hydride ions and oxygen vacancies. Conventional synthesis relies on vacuum sealed ampules, using long reaction times at high temperatures, limiting accessibility. Here, we demonstrate a rapid, ambient-pressure route to oxyhydride formation using NaBH 4 under flowing argon in just 1 h. This approach significantly lowers experimental barriers, enabling broader exploration of these materials. The maximum hydride incorporation, obtained using a reaction temperature of 400 °C, is given by the formula SrTiO 2.945 H 0.049 , where the hydride, oxygen vacancy, and unpaired electron concentrations are determined through thermogravimetric analysis, quantitative solid-state nuclear magnetic resonance (NMR) spectroscopy, and electron paramagnetic resonance (EPR) spectroscopy. Density functional theory simulations of the 1 H NMR shifts for candidate point defects support the assignment of the observed hydride peak, validating the efficacy of the synthetic approach. A combination of in situ and ex situ studies of the reaction pathway reveal that hydride incorporation into the perovskite occurs via direct solid-solid reaction, with higher reaction temperatures favoring NaBH 4 decomposition and H 2 (g) release over oxyhydride formation. The electronic defect structure established from the EPR and NMR studies indicate that, at ambient temperature, anion vacant sites are occupied by single electrons, whereas hydride sites do not trap electrons. As a result, this work establishes a scalable synthesis strategy and provides a computational-experimental framework for understanding defect chemistry in oxyhydrides, opening pathways for their integration into energy and electronic applications.

Anions↗
DOE OSTI2024

Formation of Stable Radicals by Mechanochemistry and Their Application for Magic Angle Spinning Dynamic Nuclear Polarization Solid-State NMR Spectroscopy

High-field magic angle spinning (MAS) dynamic nuclear polarization (DNP) solid-state nuclear magnetic resonance (SSNMR) is becoming a common technique for improving the sensitivity in NMR by the hyperpolarization of nuclear spins. Recently, we have shown that gamma irradiation is capable of creating long-lived free radicals that are amenable to MAS DNP in quartz and a variety of organic solids. Here, we demonstrate that mechanochemical ball milling is able to generate millimolar concentrations of stable radical species in diverse materials, such as polystyrene, cellulose, borosilicate glass, and fused quartz. High-field electron paramagnetic resonance (EPR) was used to obtain further insight into the nature of the radicals formed in ball milled quartz and borosilicate glass. Finally, we further show that radicals generated in quartz by ball milling can be used for solid-effect DNP. We obtained 29 Si DNP enhancements of approximately 114 and 33 at 110 K and room temperature, respectively, from a sample of ball milled quartz.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Transition from Vogel-Fulcher-Tammann to Arrhenius Ion-Conducting Behavior in Poly(Ethyl Acrylate)-Based Solid Polymer Electrolytes via Succinonitrile Plasticizer Addition

Solid polymer electrolytes (SPEs) offer potential advantages over liquid electrolytes, including flexibility, safety, and processability. However, they suffer from low room-temperature ionic conductivity. Recently, it has been reported a poly(ethyl acrylate) based (polyEA) SPE, by incorporating 50 wt% of succinonitrile (SN) solid plasticizer, 30 wt% of lithium salt and 5 wt% of fluoroethylene carbonate additive, which achieves a high room-temperature ionic conductivity of 1.01 × 10 −3 S cm −1 (Nat. Nanotechnol, 2022, 17, 768-776). This novel SPE exhibits stability against Li 0 and anodic stability up to 4.9 V vs Li + /Li. However, the specific mechanism responsible for its high ionic conductivity remains elusive. In this work, by adjusting the weight ratio of SN in the SPE, a transition from Vogel-Fulcher-Tammann to Arrhenius ion-conducting behavior is observed. It is demonstrated that the addition of SN leads to the gradual decoupling of Li-ion from the polymer backbone and its coordination with SN, as revealed by 6 Li solid-state nuclear magnetic resonance spectroscopy. As a result, Li-ion migration primarily occurs through SN rather than the segmental motion of the polymer backbone. Performances of the SPE in Cu||Li, Li||Li and a LiFePO 4 ||Li pouch cells are shown to demonstrate the commercial viability of this SPE in Li 0 -anode solid-state batteries.

Electrochemistry↗
DOE OSTI2021

Revealing the Configuration and Conformation of Surface Organometallic Catalysts with DNP-Enhanced NMR

Although single-site, supported organometallic catalysts were designed with homogeneity in mind, little is strictly known about their atomic-level structure and uniformity. This is in large part due to the inability of conventional characterization tools to provide structural information with adequate resolution and range for this purpose. In this work, we show that dynamic nuclear polarization (DNP)-enhanced solid-state nuclear magnetic resonance (NMR) enables the measurement of distances between the surface and individual carbons, making it possible to orient complexes and molecules on surfaces. We use this approach to determine the orientation and configuration of naturally 13 C-abundant acetate and supported organoiridium(III) pincer complex, both supported on γ-Al 2 O 3 . By combining solid-state NMR and extended X-ray absorption fine structure spectroscopy (EXAFS) experiments with periodic density functional theory (DFT) calculations, we are able to determine the three-dimensional arrangement of ligands around the metal center and thereby identify the structure of the supported complex at a resolution reminiscent of that associated with single-crystal diffractometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Atomically Dispersed Copper Sites in a Metal–Organic Framework for Reduction of Nitrogen Dioxide

Metal-organic framework (MOF) materials provide an excellent platform to fabricate single-atom catalysts due to their structural diversity, intrinsic porosity, and designable functionality. However, the unambiguous identification of atomically dispersed metal sites and the elucidation of their role in catalysis are challenging due to limited methods of characterization and lack of direct structural information. Here, we report a comprehensive investigation of the structure and the role of atomically dispersed copper sites in UiO-66 for the catalytic reduction of NO 2 at ambient temperature. The atomic dispersion of copper sites on UiO-66 is confirmed by high-angle annular dark-field scanning transmission electron microscopy, electron paramagnetic resonance spectroscopy, and inelastic neutron scattering, and their location is identified by neutron powder diffraction and solid-state nuclear magnetic resonance spectroscopy. The Cu/UiO-66 catalyst exhibits superior catalytic performance for the reduction of NO 2 at 25 °C without the use of reductants. A selectivity of 88% for the formation of N2 at a 97% conversion of NO 2 with a lifetime of >50 h and an unprecedented turnover frequency of 6.1 h-1 is achieved under nonthermal plasma activation. In situ and operando infrared, solid-state NMR, and EPR spectroscopy reveal the critical role of copper sites in the adsorption and activation of NO 2 molecules, with the formation of {Cu(I)···NO} and {Cu···NO 2 } adducts promoting the conversion of NO 2 to N 2 . This study will inspire the further design and study of new efficient single-atom catalysts for NO 2 abatement via detailed unravelling of their role in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating the Atomic Structures of the Gel Layer Formed during Aluminoborosilicate Glass Dissolution: An Integrated Experimental and Simulation Study

The altered glasses produced during aqueous dissolution of silicate and borosilicate glasses are among the most complex structures to understand at the atomic level due to their amorphous nature, random porosity and various levels of hydration. In this study, we gained insights of the complex atomic structures of altered aluminoborosilicate glasses by combining a range of experimental and computational approaches. The altered glasses were prepared by dissolution of three glasses with varying level of alumina in acid for 7 days. A comprehensive set of experimental [elemental analysis, high-energy X-ray diffraction, 29 Si and 27 Al solid-state nuclear magnetic resonance (NMR), and O 1s X-ray photoelectron spectroscopy (XPS)] and modeling (molecular dynamics (MD) simulations using non-reactive and reactive force fields) were used to study the atomic structures of these altered glasses. Elemental analysis showed that most of the B in the pristine glasses was leached into the solution and was not contained in the altered glass. The 29 Si and 27 Al solid-state NMR spectra revealed that the altered glasses have more polymerized silicate network as compared to those in the pristine glasses due to the reformation of linkages among Si and Al oxygen polyhedral in the altered glasses. The bridging and non-bridging (or hydroxyl O) atoms in the altered glasses were also quantified from their O 1s XPS spectra. Atomic structure models of the altered glasses were constructed by using MD simulations using the reactive force field based on the compositional information obtained from experiments. Various pore structures were generated using the charge-scaling (CS) method by using different initial densities and CS temperatures; the best CS parameters of each alternated glass were then determined by comparing with the experimental structure factors obtained from high energy X-ray diffraction. Pore and the atomic structures and vibrational properties around these pore surfaces were analyzed. Furthermore, these results from this comprehensive study thus provides a realistic insight into the pore morphology, atomic structure, and vibrational properties of altered glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Lithiating magneto-ionics in a rechargeable battery

Magneto-ionics, real-time ionic control of magnetism in solid-state materials, promise ultralow-power memory, computing, and ultralow-field sensor technologies. The real-time ion intercalation is also the key state-of-charge feature in rechargeable batteries. Here, we report that the reversible lithiation/delithiation in molecular magneto-ionic material, the cathode in a rechargeable lithium-ion battery, accurately monitors its real-time state of charge through a dynamic tunability of magnetic ordering. The electrochemical and magnetic studies confirm that the structural vacancy and hydrogen-bonding networks enable reversible lithiation and delithiation in the magnetic cathode. Coupling with microwave-excited spin wave at a low frequency (0.35 GHz) and a magnetic field of 100 Oe, we reveal a fast and reliable built-in magneto-ionic sensor monitoring state of charge in rechargeable batteries. The findings shown herein promise an integration of molecular magneto-ionic cathode and rechargeable batteries for real-time monitoring of state of charge.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A free-standing lithium phosphorus oxynitride thin film electrolyte promotes uniformly dense lithium metal deposition with no external pressure

Lithium phosphorus oxynitride (LiPON) is an amorphous solid electrolyte that has been extensively studied over the last three decades. Despite the promise of pairing it with various electrode materials, LiPON’s rigidity and air sensitivity set limitations to understanding its intrinsic properties. We report a methodology to synthesize LiPON in a free-standing form that manifests remarkable flexibility and a Young’s modulus of ∼33 GPa. We use solid-state nuclear magnetic resonance and differential scanning calorimetry to quantitatively reveal the chemistry of the Li/LiPON interface and the presence of a well-defined LiPON glass-transition temperature of 207 °C. Combining interfacial stress and a gold seeding layer, our free-standing LiPON shows a uniformly dense deposition of lithium metal without the aid of external pressure. This free-standing LiPON film offers opportunities to study fundamental properties of LiPON for interface engineering for solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Interplay of Crystal Structure and Magnetic Properties of the Eu 5.08-x Sr x Al 3 Sb 6 Solid Solution

Zintl phases containing rare-earth metals have gained attention due to their magnetic, electronic, and thermoelectric properties. Eu 5.08 Al 3 Sb 6 is a new structure type (monoclinic space group C2/m) that can be described as a pseudorock-salt EuSb motif with the Eu-centered Sb octahedra at the origin of the unit cell, and on the C-face center, containing either Eu (8%) or an Al 4 tetrahedron modeled as a dual tetrahedron (37.5%). The complete solid solution of Eu 5.08–x Sr x Al 3 Sb 6 can be prepared; however, the cation totals vacillate from 5 to 5.24 depending on the Al content. Al K-edge XANES shows a shift to higher energy relative to the Al metal but at slightly lower energy relative to AlSb, indicating an intermediate oxidation state closer to +3 than 0. The lack of an Al K-edge shift with the incorporation of Sr suggests that changes in Sr content do not have a meaningful impact on the electronics of the Al tetrahedra. Investigation of the solid solution structures provides evidence for classifying this structure type as a polar intermetallic phase with variable composition. Magnetization measurements were collected for the solid solution and show complex magnetic ordering with competing ferromagnetic and antiferromagnetic interactions as the Sr content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

A Survey of the Utility of Satellite Magnetometer Data for Application to Solid-earth Geophysical and Geological Studies

A survey of potential users of low altitude satellite magnetic measurements for solid-earth and geological studies was conducted. The principal objectives of this survey were to: document the utility and application of the data and resultant products obtained from such a satellite mission, and establish a users committee for the proposed low altitude vector magnetometer satellite.

Source record↗
DOE OSTI2021

Importance of multimodal characterization and influence of residual Li 2 S impurity in amorphous Li 3 PS 4 inorganic electrolytes

Amorphous Li 3 PS 4 (LPS) solid-state electrolytes are promising for energy-dense lithium metal batteries. LPS glass, synthesized from a 3:1 mol ratio of Li 2 S and P 2 S 5 , has high ionic conductivity and can be synthesized by ball milling or solution processing. Ball milling has been attractive because it provides the easiest route to access amorphous LPS with a conductivity of 3.5 × 10 –4 S cm –1 (20 °C). However, achieving the complete reaction of precursors via ball milling can be difficult, and most literature reports use X-ray diffraction (XRD) or Raman spectroscopy to confirm sample purity, both of which have limitations. Furthermore, the effect of residual precursors on ionic conductivity and lithium metal cycling is unknown. In this work, we illustrate the importance of multimodal characterization to determine LPS phase and chemical purity. To determine the residual Li 2 S content in LPS, we show that (1) XRD and 31 P solid state nuclear magnetic resonance (ssNMR) are insufficient and (2) Raman loses sensitivity at concentrations below 12 mol% Li 2 S. Most importantly, we show that 7 Li ssNMR is highly sensitive. Using 7 Li ssNMR, we investigate the effect of ball milling parameters and develop a robust and highly reproducible procedure for pure LPS synthesis. We find that as the residual Li 2 S precursor content increases, LPS conductivity decreases and lithium metal batteries exhibit higher overpotentials and poor cycle life. Furthermore, our work reveals the importance of multimodal characterization techniques for amorphous solid-state electrolyte characterization and will enable better synthetic strategies for highly conductive electrolytes for efficient energy-dense solid-state lithium metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Quantum Engineering With Hybrid Magnonic Systems and Materials (Invited Paper)

Quantum technology has made tremendous strides over the past two decades with remarkable advances in materials engineering, circuit design and dynamic operation. In particular, the integration of different quantum modules has benefited from hybrid quantum systems, which provide an important pathway for harnessing the different natural advantages of complementary quantum systems and for engineering new functionalities. This review focuses on the current frontiers with respect to utilizing magnetic excitations or magnons for novel quantum functionality. Magnons are the fundamental excitations of magnetically ordered solid-state materials and provide great tunability and exibility for interacting with various quantum modules for integration in diverse quantum systems. The concomitant rich variety of physics and material selections enable exploration of novel quantum phenomena in materials science and engineering. In addition, the relative ease of generating strong coupling and forming hybrid dynamic systems with other excitations makes hybrid magnonics a unique platform for quantum engineering. We start our discussion with circuit-based hybrid magnonic systems, which are coupled with microwave photons and acoustic phonons. Subsequently, we are focusing on the recent progress of magnon-magnon coupling within confined magnetic systems. Next we highlight new opportunities for understanding the interactions between magnons and nitrogen-vacancy centers for quantum sensing and implementing quantum interconnects. Lastly, we focus on the spin excitations and magnon spectra of novel quantum materials investigated with advanced optical characterization.

42 ENGINEERING↗
DOE OSTI2022

Eminuscent phase in frustrated magnets: a challenge to quantum spin liquids

A geometrically frustrated (GF) magnet consists of localised magnetic moments, spins, whose orientation cannot be arranged to simultaneously minimise their interaction energies. Such materials may host novel fascinating phases of matter, such as fluid-like states called quantum spin-liquids. GF magnets have, like all solid-state systems, randomly located impurities whose magnetic moments may “freeze” at low temperatures, making the system enter a spin-glass state. We analyse the available data for spin-glass transitions in GF materials and find a surprising trend: the glass-transition temperature grows with decreasing impurity concentration and reaches a finite value in the impurity-free limit at a previously unidentified, “hidden”, energy scale. We propose a scenario in which the interplay of interactions and entropy leads to a crossover in the permeability of the medium that assists glass freezing at low temperatures. This low-temperature, “eminuscent”, phase may obscure or even destroy the widely-sought spin-liquid states in rather clean systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Tunable Magnetic Exchange between Rare-Earth Metal 5d and Iron 3d States: A Case Study of the Multiple Magnetic Transitions in Gd 6 FeBi 2 and the Solid Solutions Dy 6– x Gd x FeBi 2 (1 ≤ x ≤ 5) with Curie Temperatures in the Range 120–350 K

In this paper, the room-temperature magnet Gd 6 FeBi 2 was comprehensively characterized by means of temperature-dependent single-crystal X-ray diffraction, magnetization measurements, and experimental electron density and electronic structure computations. This work explores the electron-spin effects of Fe on this structure and suggests that Gd6FeBi2 shows structural features and exchange interactions, which are clearly distinguishable from other analogues, including the solid solutions Dy 6–x Gd x FeBi 2 (0 ≤ x ≤ 5). The unique traits of Gd 6 FeBi 2 and its derivatives encompass abnormal variations of lattice parameters with the temperature, as well as the presence of multiple magnetic transitions of complex nature. Based on the comprehensive analyses, it can be suggested that the unique magnetic response in this material is the result from tunable Fe spin states, which are coupled with strong Gd 5d–Fe 3d interactions, which differ from other members of this large, structural family. In the ground state, according to density functional theory calculations, the Fe atom carries two net electrons, whose spins are coupled in an antiparallel fashion to the spins of the Gd electrons. Near the Curie temperature, the Fe net moment is reduced intermittently, coupled with a multiple of magnetic transitions. The magnetic correlations are manifested in unexpected variations of the lattice parameters as a function of temperature, suggesting spin–lattice interactions. Furthermore, this study emphasizes the important role of Gd 5d electrons in tuning Fe 3d-based magnetic contribution, which enables better understanding on the spin coupling in other related compounds and sheds light on the development of new magnetic and spintronic compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cellulose crystallinity index (CrI) of switchgrass measured by solid-state NMR

Here we present a curated dataset of switchgrass cellulose crystallinity index (CrI) measured using solid state nuclear magnetic resonance (NMR) spectroscopy. Seventy-two topline switchgrass lines grown in greenhouse were collected and ground to -20/+80 mesh. The switchgrass was then Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extractives-free switchgrass was holopulped by using peracetic acid at 5 g loading per g biomass and the solution consistency was adjusted to 5% with DI water. Holopulping was conducted at room temperature for 24 h with stirring. The obtained holocellulose was washed excessively with DI water and air-dried at room temperature for 24 h. The dried holocellulose was treated with hydrochloric acid (2.5 M) for 2 h to remove hemicellulose. The isolated cellulose was collected by filtration, rinsed with DI water, and used to analyze cellulose crystallinity by solid-state NMR. The NMR samples were prepared by packing the moisturized cellulose into 4-mm cylindrical Zirconia MAS rotors. Cross polarization/magic angle spinning (CP/MAS) NMR analysis of cellulose was carried out on a Bruker Avance III 400-MHz spectrometer operating at 100.59 MHz for 13C in a Bruker double-resonance MAS probe head at spinning speeds of 8 kHz. The CP/MAS experiments utilized a 5 ms (90°) proton pulse, 1.5 ms contact pulse, 4 s recycle delay and 4000 scans. The cellulose crystallinity index was determined from the areas of the cellulose crystalline C4 signal (δ 86-92 ppm) over the entire C4 regions (δ 79-92 ppm) in the NMR spectra.

Cellulose, crystallinity index, switchgrass, solid↗
DOE OSTI2022

Dynamic heterogeneity and nanophase separation in rubber-toughened amine-cured highly cross-linked polymer networks

Solid state nuclear magnetic resonance (NMR) spectroscopy and small-to wide-angle X-ray scattering (SWAXS) methods were used to characterize the heterogeneous dynamics and polymer domain structure in rubber modified thermoset materials containing the diglycidyl ether of bisphenol A (DGEBA) epoxy resin and a mixture of Jeffamine reactive rubber and 4,4-diaminodicyclohexylmethane (PACM) amine curing agent. The polymer chain dynamics and morphologies as a function of the PACM/Jeffamine ratio were determined. Using dipolar-filtered NMR experiments, the resulting networks are shown to be composed of mobile and rigid regions that are separated on nanometer length scales, along with a dynamically immobilized interface region. Proton NMR spin diffusion experiments measured the dimensions of the mobile phase to range between 9 and 66 nm and varied with the relative PACM concentration. Solid state 13 C magic angle spinning NMR experiments show that the highly mobile phase is composed entirely of the dynamically flexible polyether chains of the Jeffamine rubber, the immobilized interface region is a mixture of DGEBA, PACM, and the Jeffamine rubber, with the PACM cross-linked to DGEBA predominantly residing in the rigid phase. The SWAXS results showed compositional nanophase separation spanning the 11–77 nm range. These measurements of the nanoscale compositional and dynamic heterogeneity provide molecular level insight into the very broad and controllable glass transition temperature distributions observed for these highly cross-linked polymer networks.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Atomic hydrogen as a launch vehicle propellant

An analysis of several atomic hydrogen launch vehicles was conducted. A discussion of the facilities and the technologies that would be needed for these vehicles is also presented. The Gross Liftoff Weights (GLOW) for two systems were estimated; their specific impulses (I sub sp) were 750 and 1500 lb(sub f)/s/lb(sub m). The atomic hydrogen launch vehicles were also compared to the currently planned Advanced Launch System design concepts. Very significant GLOW reductions of 52 to 58 percent are possible over the Advanced Launch System designs. Applying atomic hydrogen propellants to upper stages was also considered. Very high I(sub sp) (greater than 750 lb(sub f)/s/lb(sub m)) is needed to enable a mass savings over advanced oxygen/hydrogen propulsion. Associated with the potential benefits of high I(sub sp) atomic hydrogen are several challenging problems. Very high magnetic fields are required to maintain the atomic hydrogen in a solid hydrogen matrix. The magnetic field strength was estimated to be 30 kilogauss (3 Tesla). Also the storage temperature of the propellant is 4 K. This very low temperature will require a large refrigeration facility for the launch vehicle. The design considerations for a very high recombination rate for the propellant are also discussed. A recombination rate of 210 cm/s is predicted for atomic hydrogen. This high recombination rate can produce very high acceleration for the launch vehicle. Unique insulation or segmentation to inhibit the propellant may be needed to reduce its recombination rate.

Palaszewski, Bryan A.↗