Search NASA⌕ Search

SEARCH · Search NASA

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Ice crystal growth in water vapor at high saturation

A simple technique is presented for estimating the energy of formation of monolayer icelike clusters at ice-vapor interfaces. Under the assumptions that the ice surfaces are smooth and sparsely covered with monomers, dimers, etc., in near equilibrium with the vapor, and that the bond energies and configurational entropy dominate the energy of formation, it is found that the basal surfaces prefer triangular embryos with an orientation which reverses from layer to layer, whereas the most stable clusters on the prism surfaces are rectangular in configuration. The preferred prism clusters are determined to have a significantly lower critical energy of formation than the basal clusters due to differences in both corner free energy and configurational entropy. This phenomenon provides a mechanism for strongly anisotropic crystal growth at high saturations.

Bartley, D. L.↗

Streaming potential measurements of biosurfaces

A technique based on the measurement of streaming potentials has been developed to evaluate the electrokinetic region of the cell periphery. This approach is feasible for cell lines propagated in in-vitro cell cultures in monolayer form. The advantage of this system is that cells may be evaluated in the living state atttached to a substrate; it is not necessary to subject the cells to enzymatic, chemical, or mechanical trauma required to obtain monodisperse suspensions which are then normally evaluated by microelectrophoresis. In this manner, it should be possible to study the influence of substrate and environmental factors on the charge density and potential at the cell periphery. The apparatus and procedure are described as well as some results concerning the electrokinetic potential of borosilicate capillaries as a function of ionic strength, pH, and temperature. The effect that turbulence and entrance flow conditions have on accurate streaming-potential measurements is discussed. The electrokinetic potential of BALB/c 3T12 fibroblasts has been quantified as a function of pH, ionic strength, glutaraldehyde fixation, and Giemsa staining.

Van Wagenen, R. A.↗

Sputtering in interstellar shocks - A model for heavy element depletion

High-velocity (at least 100 km/s) shock fronts are found to provide an environment where grains can be destroyed by thermal sputtering. Application is made to supernova remnants. Sputtering of refractory grains in shocks associated with high-velocity clouds leads to cosmic abundances of heavy elements and if followed by deceleration of the high-velocity gas and dilution with ambient depleted matter. A correlation of depletion with systematic velocity is predicted. It is proposed that there is a residual underlying depletion associated with refractory grain formation and a subsequent trapping of gas-phase metallic species by adsorption. Sputtering of adsorbed monolayers in intermediate-velocity shocks (not exceeding 50 km/s) can account for a range of depletions in diffuse interstellar matter.

Barlow, M. J.↗

The rings of Saturn - Two-frequency radar observations

Results are reported for a two-frequency dual-polarization radar-echo study of Saturn's rings which involved monostatic operation at a wavelength of 3.5 cm and bistatic operation at 12.6 cm. The radar observations show that the rings effectively depolarize linearly and circularly polarized incident waves at the two wavelengths; that the ring particles are unusually efficient radar reflectors, yielding approximately the same high total cross section at both wavelengths; and that there is an apparent excess of power at the 'central' Doppler shifts when compared with homogeneous scattering models based on the optically observed ring distributions. Several possible explanations for these three radar properties are considered. It is found that a model which hypothesizes a thick cloud of irregular water-ice chunks a few centimeters or larger in radius and a model which postulates a monolayer of multimeter-sized water-frost-coated metallic chunks both seem capable of explaining the first two radar properties. But no consistent explanation is found for the excess low-frequency spectral power.

Goldstein, R. M.↗

Crystalline embryos at ice-vapor interfaces

The nucleation of small monolayer ice-like clusters at the basal and prism ice-vapor interfaces is considered. It is found that the basal surfaces prefer triangular embryos with an orientation that reverses from layer to layer, whereas the most stable clusters on the prism surfaces are rectangular in configuration. At any given saturation ratio, the preferred prism clusters are found to have a critical energy of formation significantly lower than that of the basal clusters, basically because of differences in cluster corner free energies.

Bartley, D. L.↗

The adsorption and early stages of condensation of Ag and Au on W single-crystal surfaces

Silver and gold were evaporated up to several monolayers in thickness onto W single-crystal surfaces of the 110 and 100 plane types in the temperature range between 300 and 1300 K. The mode of growth and the structure of the layers were studied by Auger electron spectroscopy and low-energy electron diffraction. The results are compared with thermal desorption spectroscopy data and work-function change measurements. They show certain similarities but also some striking differences between the two systems Ag/W and Au/W as well as a strong crystallographic anisotropy of adsorption and condensation.

Bauer, E.↗

Saturn's rings: Particle composition and size distribution as constrained by microwave observations. I - Radar observations

The radar backscattering characteristics of compositional and structural models of Saturn's rings are calculated and compared with observations of the absolute value, wavelength dependence, and degree of depolarization of the rings' radar cross section (reflectivity). The doubling method is used to calculate reflectivities for systems that are many particles thick using optical depths derived from observations at visible wavelengths. If the rings are many particles thick, irregular centimeter- to meter-sized particles composed primarily of water ice attain sufficiently high albedos and scattering efficiencies to explain the radar observations. In that case, the wavelength independence of radar reflectivity implies the existence of a broad particle size distribution; a narrower size distribution is also a possibility. Particles of primarily silicate composition are ruled out by the radar observations. Purely metallic particles may not be ruled out on the basis of existing radar observations. A monolayer of very large ice 'particles' that exhibit multiple internal scattering may not yet be ruled out.

Cuzzi, J. N.↗

Sputtering of uranium

Results are presented for an experimental study of the sputtering of U-235 atoms from foil targets by hydrogen, helium, and argon ions, which was performed by observing tracks produced in mica by fission fragments following thermal-neutron-induced fission. The technique used allowed measurements of uranium sputtering yields of less than 0.0001 atom/ion as well as yields involving the removal of less than 0.01 monolayer of the uranium target surface. The results reported include measurements of the sputtering yields for 40-120-keV protons, 40-120-keV He-4(+) ions, and 40- and 80-keV Ar-40(+) ions, the mass distribution of chunks emitted during sputtering by the protons and 80-keV Ar-40(+) ions, the total chunk yield during He-4(+) sputtering, and some limited data on molecular sputtering by H2(+) and H3(+). The angular distribution of the sputtered uranium is discussed, and the yields obtained are compared with the predictions of collision cascade theory.

Gregg, R.↗

Elevated temperature properties of boron/aluminum composites

The high temperature properties of boron/aluminum composites, fabricated by an air diffusion bonding technique utilizing vacuum-bonded monolayer tape are reported. Seventeen different combinations of matrix alloy, reinforcement diameter, reinforcement volume percent, angle-ply and matrix enhancement (i.e. titanium cladding and interleaves) were fabricated, inspected, and tested. It is shown that good to excellent mechanical properties could be obtained for air-bonded boron/aluminum composites and that these properties did not decrease significantly up to a test temperature of at least 260 C. Composites made with 8 mil B/W fiber show a much greater longitudinal strength dependence on volume percent fiber than composites made with 5.6 mil fiber. The addition of titanium caused difficulties in composite bonding and yielded composites with reduced strength.

Sullivan, P. G.↗

A proposed physical model for the impregnated tungsten cathode based on Auger surface studies of the Ba-O-W system

Auger spectra and work function measurements are used to study the surface reactions between tungsten surface and adsorbed layers of barium, and barium and oxygen. The barium on an impregnated tungsten cathod seems to be an intermediate state, probably a coadsorbed barium-oxygen layer on tungsten. A slightly revised version of the previously suggested (1976) impregnated tungsten cathode model is proposed. This revised model assumes that the cathode surface during life has an adsorbed surface layer of a monolayer or less of both barium and oxygen on the surface. At end of life, steep drop in electron emission and resultant cathode failure occur. Recent NASA life test results on TWT type tubes are reported and explained by the proposed model.

Forman, R.↗

Comment on the mechanism of operation of the impregnated tungsten cathode

Recent life-test measurements, over 20,000-30,000 h, on impregnated tungsten cathodes in tubes employing an open-type electron-gun structure, show emission current degradation with time. This is in contrast to those recently published by Rittner on B-type cathodes, run in close-spaced diodes, taken some years ago. These more recent life-test results are consistent with the model suggested by Forman and disputed by Rittner that the barium coverage on an impregnated cathode is less than a monolayer for most of its life and decreases with time.

Forman, R.↗

The study of 'microsurfaces' using thermal desorption spectroscopy

The use of a newly combined ultrahigh vacuum technique for studying continuous and particulate evaporated thin films using thermal desorption spectroscopy (TDS), transmission electron microscopy (TEM), and transmission electron diffraction (TED) is discussed. It is shown that (1) CO thermal desorption energies of epitaxially deposited (111) Ni and (111) Pd surfaces agree perfectly with previously published data on bulk (111) single crystal, (2) contamination and surface structural differences can be detected using TDS as a surface probe and TEM as a complementary technique, and (3) CO desorption signals from deposited metal coverages of one-thousandth of a monolayer should be detectable. These results indicate that the chemisorption properties of supported 'microsurfaces' of metals can now be investigated with very high sensitivity. The combined use of TDS and TEM-TED experimental methods is a very powerful technique for fundamental studies in basic thin film physics and in catalysis.

Thomas, M. E.↗

Bulk lifetime indicates surface contamination

Indirect measurement of wafer surface impurities has sensitivity of 300 monolayers. Photoconductivity-decay apparatus determines bulk recombination lifetime in semiconductor materials. Bulk impurity levels before and after annealing relate to level of surface contamination. Method evaluates wafer cleaning techniques, qualifying purity of chemical and deionized water used, or monitors production process.

Blais, P. D.↗

Radar observations of Saturn's rings at intermediate tilt angles

The 12.6-cm-wavelength radar observations of Saturn's rings, corresponding to ring-plane tilt angles of 18.2, 11.7, and 5.6 degrees, respectively, are reported. Measurements of geometric albedo and circular polarization ratio are used to investigate acceptable ring models and radar scattering properties of individual particles. Attention is given to the dependence of the rings' polarization properties on wavelength or tilt angle, or both. All large-particle monolayer models of Saturn's rings are ruled out; however, extended-layer models postulating ice or metal particles are compatible with the radar albedo measurements and are less severely restricted by the polarization data.

Ostro, S. J.↗

Comparison of the early stages of condensation of Cu and Ag on Mo/100/ with Cu and Ag on W/100/

The adsorption and condensation of Cu and Ag, up to several monolayers in thickness, onto Mo(100) has been observed at pressures below 2 times 10 to the -10th torr in a study that used combined LEED, Auger, TDS (Thermal Desorption Spectroscopy), and work function measurements in a single experimental setup. The results show that Cu behaves similarly on Mo(100) and W(100) substrates, while some differences are found for Ag adsorption.

Soria, F.↗

Two-dimensional O2 adsorbed on graphite

Properties of two-dimensional O2 adsorbed on graphite are calculated in the extremely low-coverage delta region and for monolayers, with use of pattern-recognition optimization and Monte Carlo techniques. Equilibrium configurations and orientations, orientational order-disorder, melting, and dissociation transitions are predicted at various O2 densities. Phase characteristics, including a plastic crystallite phase, are compared with experiment.

Etters, R. D.↗

XPS study of the chemical structure of the nickel/silicon interface

The chemical nature of the Ni/Si, Ni/Ni2Si, and Si/Ni2Si interfaces is studied using X-ray photoelectron spectroscopy. Two approaches are employed: (1) the Ni/silicide and Si/silicide interfaces are examined by dynamically monitoring the advancing reaction front during in situ growth and (2) as-deposited Ni/Si interfacial properties are analyzed by sequential evaporating monolayer Ni films on Si. These experiments show that the Ni/Ni2Si interface consists of a Ni-rich silicide phase, while the Si/Ni2Si interface has a transitional region that is correspondingly Si-rich silicide.

Grunthaner, P. J.↗

Interactions of surfaces with the solar plasma

The induced environment is the main source of contamination on a spacecraft. The contamination of surfaces by volatile condensable material (VCM) present on spacecraft is being studied by many investigators both in the laboratory and space. In addition to VCM, the space environment is also a contributing factor in the contamination of surfaces. The effects of the interaction of the solar plasma with surfaces is examined. Plasma particles impact at energies in the multi-kilovolt range and penetrate and become trapped in surfaces. Results show that protons can penetrate up to 600 monolayers into surfaces and reach saturation concentrations of 6%.

Mckeown, D.↗