Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical networking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

High-speed digital fiber optic links for satellite traffic

Large aperture phased array antennas operating at millimeter wave frequencies are designed for space-based communications and imaging platforms. Array elements are comprised of active T/R modules which are linked to the central processing unit through high-speed fiber-optic networks. The system architecture satisfying system requirements at millimeter wave frequency is T/R level data mixing where data and frequency reference signals are distributed independently before mixing at the T/R modules. This paper demonstrates design procedures of a low loss high-speed fiber-optic link used for transmission of data signals over 600-900 MHz bandwidth inside satellite. The fiber-optic link is characterized for transmission of analog and digital data. A dynamic range of 79 dB/MHz was measured for analog data over the bandwidth. On the other hand, for bursted SMSK satellite traffic at 220 Mbps rates, BER of 2 x 10 to the -7th was measured for E(b)/N(o) of 14.3 dB.

Daryoush, A. S.↗

Characterization of devices, circuits, and high-temperature superconductor transmission lines by electro-optic testing

The development of a capability for testing transmission lines, devices, and circuits using the optically-based technique of electro-optics sampling was the goal of this project. Electro-optic network analysis of a high-speed device was demonstrated. The project involved research on all of the facets necessary in order to realize this result, including the discovery of the optimum electronic pulse source, development of an adequate test fixture, improvement of the electro-optic probe tip, and identification of a device which responded at high frequency but did not oscillate in the test fixture. In addition, during the process of investigating patterned high-critical-temperature superconductors, several non-contacting techniques for the determination of the transport properties of high T(sub c) films were developed and implemented. These are a transient, optical pump-probe, time-resolved reflectivity experiment, an impulsive-stimulated Raman scattering experiment, and a terahertz-beam coherent-spectroscopy experiment. The latter technique has enabled us to measure both the complex refractive index of an MgO substrate used for high-T(sub c) films and the complex conductivity of a YBa2Cu3O(7-x) sample. This information was acquired across an extremely wide frequency range: from the microwave to the submillimeter-wave regime. The experiments on the YBCO were conducted without patterning of, or contact to, the thin film. Thus, the need for the more difficult transmission-line experiments was eliminated. Progress in all of these areas was made and is documented in a number of papers. These papers may be found in the section listing the abstracts of the publications that were issued during the course of the research.

Whitaker, John F.↗

Designing Glass and Crystalline Phases of Metal–Bis(acetamide) Networks to Promote High Optical Contrast

Owing to their high tunability and predictable structures, metal–organic materials offer a powerful platform to study glass formation and crystallization processes and to design glasses with unique properties. In this work, we report a novel series of glass-forming metal–ethylenebis(acetamide) networks that undergo reversible glass and crystallization transitions below 200 °C. The glass-transition temperatures, crystallization kinetics, and glass stability of these materials are readily tunable, either by synthetic modification or by liquid-phase blending, to form binary glasses. Pair distribution function (PDF) analysis reveals extended structural correlations in both single and binary metal–bis(acetamide) glasses and highlights the important role of metal–metal correlations during structural evolution across glass–crystal transitions. Notably, the glass and crystalline phases of a Co–ethylenebis(acetamide) binary network feature a large reflectivity contrast ratio of 4.8 that results from changes in the local coordination environment around Co centers. These results provide new insights into glass–crystal transitions in metal–organic materials and have exciting implications for optical switching, rewritable data storage, and functional glass ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Definition, analysis and development of an optical data distribution network for integrated avionics and control systems. Part 2: Component development and system integration

Fiber optic transmission is emerging as an attractive concept in data distribution onboard civil aircraft. Development of an Optical Data Distribution Network for Integrated Avionics and Control Systems for commercial aircraft will provide a data distribution network that gives freedom from EMI-RFI and ground loop problems, eliminates crosstalk and short circuits, provides protection and immunity from lightning induced transients and give a large bandwidth data transmission capability. In addition there is a potential for significantly reducing the weight and increasing the reliability over conventional data distribution networks. Wavelength Division Multiplexing (WDM) is a candidate method for data communication between the various avionic subsystems. With WDM all systems could conceptually communicate with each other without time sharing and requiring complicated coding schemes for each computer and subsystem to recognize a message. However, the state of the art of optical technology limits the application of fiber optics in advanced integrated avionics and control systems. Therefore, it is necessary to address the architecture for a fiber optics data distribution system for integrated avionics and control systems as well as develop prototype components and systems.

Yen, H. W.↗

Data and Time Transfer Using SONET Radio

The need for precise knowledge of time and frequency has become ubiquitous throughout our society. The areas of astronomy, navigation, and high speed wide-area networks are among a few of the many consumers of this type of information. The Global Positioning System (GPS) has the potential to be the most comprehensive source of precise timing information developed to date; however, the introduction of selective availability has made it difficult for many users to recover this information from the GPS system with the precision required for today's systems. The system described in this paper is a 'Synchronous Optical NetWORK (SONET) Radio Data and Time Transfer System'. The objective of this system is to provide precise time and frequency information to a variety of end-users using a two-way data and time-transfer system. Although time and frequency transfers have been done for many years, this system is unique in that time and frequency information are embedded into existing communications traffic. This eliminates the need to make the transfer of time and frequency informatio a dedicated function of the communications system. For this system SONET has been selected as the transport format from which precise time is derived. SONET has been selected because of its high data rates and its increasing acceptance throughout the industry. This paper details a proof-of-concept initiative to perform embedded time and frequency transfers using SONET Radio.

Graceffo, Gary M.↗

High End Computer Network Testbedding at NASA Goddard Space Flight Center

The Earth & Space Data Computing (ESDC) Division, at the Goddard Space Flight Center, is involved in development and demonstrating various high end computer networking capabilities. The ESDC has several high end super computers. These are used to run: (1) computer simulation of the climate systems; (2) to support the Earth and Space Sciences (ESS) project; (3) to support the Grand Challenge (GC) Science, which is aimed at understanding the turbulent convection and dynamos in stars. GC research occurs in many sites throughout the country, and this research is enabled by, in part, the multiple high performance network interconnections. The application drivers for High End Computer Networking use distributed supercomputing to support virtual reality applications, such as TerraVision, (i.e., three dimensional browser of remotely accessed data), and Cave Automatic Virtual Environments (CAVE). Workstations can access and display data from multiple CAVE's with video servers, which allows for group/project collaborations using a combination of video, data, voice and shared white boarding. The ESDC is also developing and demonstrating the high degree of interoperability between satellite and terrestrial-based networks. To this end, the ESDC is conducting research and evaluations of new computer networking protocols and related technologies which improve the interoperability of satellite and terrestrial networks. The ESDC is also involved in the Security Proof of Concept Keystone (SPOCK) program sponsored by National Security Agency (NSA). The SPOCK activity provides a forum for government users and security technology providers to share information on security requirements, emerging technologies and new product developments. Also, the ESDC is involved in the Trans-Pacific Digital Library Experiment, which aims to demonstrate and evaluate the use of high performance satellite communications and advanced data communications protocols to enable interactive digital library data access between the U. S. Library of Congress, the National Library of Japan and other digital library sites at 155 MegaBytes Per Second. The ESDC participation in this program is the Trans-Pacific access to GLOBE visualizations in real time. ESDC is participating in the Department of Defense's ATDNet with Multiwavelength Optical Network (MONET) a fully switched Wavelength Division Networking testbed. This presentation is in viewgraph format.

Gary, James Patrick↗

Narrowband microwave-photonic notch filters using Brillouin-based signal transduction in silicon

Abstract The growing demand for bandwidth makes photonic systems a leading candidate for future telecommunication and radar technologies. Integrated photonic systems offer ultra-wideband performance within a small footprint, which can naturally interface with fiber-optic networks for signal transmission. However, it remains challenging to realize narrowband (∼MHz) filters needed for high-performance communications systems using integrated photonics. In this paper, we demonstrate all-silicon microwave-photonic notch filters with 50× higher spectral resolution than previously realized in silicon photonics. This enhanced performance is achieved by utilizing optomechanical interactions to access long-lived phonons, greatly extending available coherence times in silicon. We use a multi-port Brillouin-based optomechanical system to demonstrate ultra-narrowband (2.7 MHz) notch filters with high rejection (57 dB) and frequency tunability over a wide spectral band (6 GHz) within a microwave-photonic link. We accomplish this with an all-silicon waveguide system, using CMOS-compatible fabrication techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Inverse-Designed Nanophotonic Interface for Excitons in Atomically Thin Materials

Efficient nanophotonic devices are essential for applications in quantum networking, optical information processing, sensing, and nonlinear optics. Extensive research efforts have focused on integrating two-dimensional (2D) materials into photonic structures, but this integration is often limited by size and material quality. Here, we use hexagonal boron nitride (hBN), a benchmark choice for encapsulating atomically thin materials, as a waveguiding layer while simultaneously improving the optical quality of the embedded films. When combined with a photonic inverse design, it becomes a complete nanophotonic platform to interface with optically active 2D materials. Grating couplers and low-loss waveguides provide optical interfacing and routing, tunable cavities provide a large exciton-photon coupling to transition metal dichalcogenide (TMD) monolayers through Purcell enhancement, and metasurfaces enable the efficient detection of TMD dark excitons. This work paves the way for advanced 2D-material nanophotonic structures for classical and quantum nonlinear optics.

2D materials↗

Probing Coherent States of Light and Matter in Two-Dimensional Semiconductors. Final Report

The ability to enhance light-matter interactions in engineered optical environments is well-established in micro- and nano-photonics. New classes of materials bring new rich correlations between spin, momentum, and light polarization that can be exploited in these photonic systems for information processing and low-power electronics. Interfacing these novel material features with strong optical interactions suggests the compelling capability to create hybrid light-matter systems harnessing low-energy and protected material properties such as spin. The long-term objective of this program was to investigate the interplay between pseudospin in 2D materials and light, revealing new coherent phenomena. The materials studied are the monolayer transition metal dichalcogenides (TMDs), which support polarization-sensitive optical transitions when isolated to a single sub-nanometer crystal layer in thickness. In particular, monolayer TMD semiconductors such as MoS 2 exhibit degenerate valleys in momentum space with distinct spin character. These valleys can be separately addressed by circularly polarized light, providing a tool for manipulation. Integrating this valley pseudospin of excitons in monolayer TMDs with engineered strong optical excitations to create novel coherent phenomena was a key long-term goal of this research. The scope of this research primarily focused on studying light-matter interactions of valley-sensitive excitations in monolayer TMDs. The scope also included the integration of monolayer materials that support valley-polarized emission into photonic devices. This approach extends prior work on exciton-polaritons in 2D materials toward a platform with far more control and improved light input and output characteristics to aid scalability of these polarization-sensitive phenomena to many-body, long-range optical networks. During the course of the five-year Early Career program, the approaches led to successful progress on each proposed aim. Initial successful work seeded additional research that developed from the main themes, while this program focus evolved toward coherent manipulation of valley polaritons and integration with photonics. Both of these advanced topics set the stage for new capabilities in future innovative research. The results of this project provide advances in materials and methods relevant for new visions of opto-electronics and photonics that can improve information processing in an era of increased focus on quantum and coherent phenomena. The research has also contributed to the training of two postdoctoral scholars and five graduate students.

2D Materials↗

Communications, tracking, and docking on the Space Station

Many of the communications, tracking, and docking functions on a large manned orbiting Space Station - one that is modular and made of metal - will have to be performed by optical systems out of necessity. This paper discusses four practical approaches to accomplishing Space Station functions using optical communications technology. It also provides the results of preliminary experiments involved in the design of particular systems. Major operational factors considered in each system design include: (a) electromagnetic interference problems, (b) data bandwidth requirements, (c) zero-gravity operations, (d) free-space operations, (e) data security, and (f) modular expansion of the Space Station structure. The technologies discussed are the following: (a) local infrared communications, (b) optical tracking and docking techniques, (c) long distance free space optical communications, and (d) local area optical networks.

Erwin, H. O.↗

Optical techniques to feed and control GaAs MMIC modules for phased array antenna applications

A complex signal distribution system is required to feed and control GaAs monolithic microwave integrated circuits (MMICs) for phased array antenna applications above 20 GHz. Each MMIC module will require one or more RF lines, one or more bias voltage lines, and digital lines to provide a minimum of 10 bits of combined phase and gain control information. In a closely spaced array, the routing of these multiple lines presents difficult topology problems as well as a high probability of signal interference. To overcome GaAs MMIC phased array signal distribution problems optical fibers interconnected to monolithically integrated optical components with GaAs MMIC array elements are proposed as a solution. System architecture considerations using optical fibers are described. The analog and digital optical links to respectively feed and control MMIC elements are analyzed. It is concluded that a fiber optic network will reduce weight and complexity, and increase reliability and performance, but higher power will be required.

Bhasin, K. B.↗

Optical techniques to feed and control GaAs MMIC modules for phased array antenna applications

A complex signal distribution system is required to feed and control GaAs monolithic microwave integrated circuits (MMICs) for phased array antenna applications above 20 GHz. Each MMIC module will require one or more RF lines, one or more bias voltage lines, and digital lines to provide a minimum of 10 bits of combined phase and gain control information. In a closely spaced array, the routing of these multiple lines presents difficult topology problems as well as a high probability of signal interference. To overcome GaAs MMIC phased array signal distribution problems optical fibers interconnected to monolithically integrated optical components with GaAs MMIC array elements are proposed as a solution. System architecture considerations using optical fibers are described. The analog and digital optical links to respectively feed and control MMIC elements are analyzed. It is concluded that a fiber optic network will reduce weight and complexity, and increase reliability and performance, but higher power will be required.

Bhasin, K. B.↗

Real-Time Simulation Clock

Fiber-optic network delivers time signals to widely separated simulator sites. Real-time digital flight simulation used to support variety of research programs. Majority of research involves man-in-the-loop simulation requiring interconnection of digital computers, simulation cockpits, control consoles, graphics subsystems, and related equipment. Real-time simulation subsystem consists of several CYBER(R) computers and over 20 simulation sites. Allows for several simultaneous simulation jobs on one CYBER(R) as well as any combination of sites in each integrated simulation job.

Bennington, Donald R.↗

Fiber optics wavelength division multiplexing(components)

The long term objectives are to develop optical multiplexers/demultiplexers, different wavelength and modulation stable semiconductor lasers and high data rate transceivers, as well as to test and evaluate fiber optic networks applicable to the Space Station. Progress in each of the above areas is briefly discussed.

Hendricks, Herbert D.↗

Data Management Working Group report

The current flight qualification program lags technology insertion by 6 to 10 years. The objective is to develop an integrated software engineering and development environment assisted by an expert system technology. An operating system needs to be developed which is portable to the on-board computers of the year 2000. The use of ADA verses a High-Order Language; fault tolerance; fiber optics networks; communication protocols; and security are also examined and outlined.

Filardo, Edward J.↗

MPAD MCC workstation system: ADDAM and EEVE

The flight control consoles in mission control at NASA's Johnson Space Center have evolved in sophistication to the level where expert systems are now being incorporated into them as flight controller assistants. The evolution of the gateway mode, designed to obtain and redistribute numerous kinds of data provided by Mission Control computers over a laser-optical network to enable rapid prototyping development of the above application expert systems is described. This automated distribution and management system serves as an effective buffering system for assuring the necessarily separate requirements of the operational and developmental environments.

Kozick, Bill, Jr.↗

Ring-array processor distribution topology for optical interconnects

The existing linear and rectangular processor distribution topologies for optical interconnects, although promising in many respects, cannot solve problems such as clock skews, the lack of supporting elements for efficient optical implementation, etc. The use of a ring-array processor distribution topology, however, can overcome these problems. Here, a study of the ring-array topology is conducted with an aim of implementing various fast clock rate, high-performance, compact optical networks for digital electronic multiprocessor computers. Practical design issues are addressed. Some proof-of-principle experimental results are included.

Li, Yao↗