Search NASA⌕ Search

SEARCH · Search NASA

Results for “shear layer turbulence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Effect of a delta tab on fine scale mixing in a turbulent two-stream shear layer

The fine scale mixing produced by a delta tab in a shear layer has been studied experimentally. The tab was placed at the trailing edge of a splitter plate which produced a turbulent two-stream mixing layer. The tab apex tilted downstream and into the high speed stream. Hot-wire measurements in the 3-D space behind the tab detailed the three velocity components as well as the small scale population distributions. These small scale eddies, which represent the peak in the dissipation spectrum, were identified and counted using the Peak-Valley-Counting technique. It was found that the small scale populations were greater in the shear region behind the tab, with the greatest increase occurring where the shear layer underwent a sharp turn. This location was near, but not coincident, with the core of the streamwise vortex, and away from the region exhibiting maximum turbulence intensity. Moreover, the tab increased the most probably frequency and strain rate of the small scales. It made the small scales smaller and more energetic.

Foss, J. K.↗
NASA NTRSDate not supplied

Accounting for the Influence of Decorrelation in Microphone Phased Array Deconvolution Methods

Microphone phased arrays are a common tool for use in aeroacoustic wind tunnel testing. The analysis of acquired array data is known to suffer from decorrelation effects, where the coherence of an acoustic wave measured by a pair of microphones is degraded as the wave passes through a turbulent free shear layer or boundary layer. This paper describes, in detail, how to mitigate the influence of decorrelation effects when processing array data with deconvolution methods. This is done using the DAMAS algorithm as an example, applied to recent airframe noise test data acquired in the NASA Langley 14- by 22-Foot Subsonic Tunnel. Two ways of handling the turbulent propagation modeling, both assuming plane wave propagation, are described. Results show that while turbulence model fit parameters may differ, both methods output extremely similar deconvolution results. Further improvements likely require more accurate mean shear layer data prior to developing more involved turbulence models.

microphone array↗
NASA NTRS1972

Turbulent properties of a compressible boundary layer.

Turbulent shear-stress, eddy-viscosity, mixing-length, heat-flux and Prandtl number distributions across a hypersonic turbulent boundary layer have been determined from the 'time-averaged' conservation equations using experimental mean profile data obtained at several streamwise locations in a fully developed turbulent boundary layer with negligible pressure gradient. The eddy-viscosity, mixing-length and Prandtl number results show general agreement with previous incompressible and adiabatic compressible correlations. However, when the turbulent Prandtl number is defined using total enthalpy as opposed to static enthalpy no clear correlation of the results in the outer portion of the boundary layer could be obtained.

Horstman, C. C.↗
NASA NTRS1988

Numerical solutions of the complete Navier-Stokes equations

The physical phenomena within supersonic flows that sustain chemical reactions are investigated. An earlier study to develop accurate physical models for supersonic reacting flowfields focused on 2-D laminar shear layers. The objective is to examine the mixing and subsequent combustion within turbulent reacting shear layers. To conduct this study, a computer program has been written to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method uses a cell-centered finite volume approach and a Runge Kutta time stepping scheme. The Reynolds averaged equations are closed using the eddy viscosity concept. Several zero-equation models have been tested by making calculations for an H2-air nonreacting coaxial jet flow. Comparisons made with experimental data show that Cohen's eddy viscosity model provides best agreement. The finite rate chemistry model used in the study of 2-D laminar shear layers is incorporated into the computer program and data is compared from a recent experiment performed at NASA Langley.

Hassan, H. A.↗
NASA NTRS1988

Recent insights into instability and transition to turbulence in open-flow systems

Roads to turbulence in open-flow shear layers are interpreted as sequences of often competing instabilities. These correspond to primary and higher order restructurings of vorticity distributions which culminate in convected spatial disorder (with some spatial coherence on the scale of the shear layer) traditionally called turbulence. Attempts are made to interpret these phenomena in terms of concepts of convective and global instabilities on one hand, and of chaos and strange attractors on the other. The first is fruitful, and together with a review of mechanisms of receptivity provides a unifying approach to understanding and estimating transition to turbulence. In contrast, current evidence indicates that concepts of chaos are unlikely to help in predicting transition in open-flow systems. Furthermore, a distinction should apparently be made between temporal chaos and the convected spatial disorder of turbulence past Reynolds numbers where boundary layers and separated shear layers are formed.

Morkovin, Mark V.↗
NASA NTRS2021

Characterization of Chevron Nozzle Performance

The flow fields from a set of 50.8 mm diameter circular nozzles were characterized using both streamwise and cross-stream 3-component Stereo Particle Image Velocimetry (SPIV). The test matrix of nozzles included 15 different chevron nozzle designs and one baseline, circularly symmetric nozzle. Nozzle jet operating conditions ranged from acoustic Mach numbers of 0.9 to 1.5, with static temperature ratios ranging between 0.84 and 2.7. Detailed surveys of the single jet flows were performed to capture three-dimensional features of the turbulent exhaust jet evolution. Cross-flow planar measurements were obtained at twelve axial locations, ranging from 0.1 to 20 nozzle diameters downstream of the nozzle exit planes. Streamwise measurements, along the jet centerlines, were obtained at ten partially overlapping downstream locations, providing complete axial surveys over a region extending beyond 20 nozzle diameters downstream of the nozzle exit planes. In both optical configurations, the measurement planes were sized to completely capture the fully turbulent jet shear layer growth. The measured three-dimensional mean and turbulent velocity fields, along with computed second order statistics including axial vorticity and turbulent kinetic energy, were evaluated for all test points. Well-defined streamwise vortex structures in the jet shear layers were measured and reported.

Jet Noise↗
NASA NTRS1993

Control of pressure fluctuations in the reattachment region of a supersonic free shear layer

Measurements of wall pressure fluctuations were made as part of an ongoing program to investigate the control of a turbulent, reattaching shear layer at Mach 2.9. The flow was disturbed near separation by air injection normal to the plane of the shear layer. This perturbation was found to dramatically increase the intensity of pressure fluctuations in the vicinity of reattachment. A local increase in shear layer growth rate was also observed in the perturbed flow.

Poggie, J.↗
NASA NTRS1989

Interaction of an oblique shock wave with turbulent hypersonic blunt body flows

A shock-on-shock interaction near the cowl lip of an engine inlet is studied numerically by solving the compressible full Navier-Stokes equations. The present study focuses on Edney's type III shock interference pattern in which the turbulent free shear layer impinges on the cowl lip (modeled as a cylinder). Van Leer's flux-vector splitting upwind MUSCL scheme is used in the solver with algebraic turbulence models. Turbulent solutions of surface pressures and heat fluxes along the cowl lip are in reasonably good agreement with experiment except in the local shear layer impingement region. The present study showed some indications that higher order turbulent models may be required to improve the solution near the free shear layer impingement region.

Moon, Young J.↗
NASA NTRS1994

Turbulent Heat Transfer Characteristics in the Shear Layer of a Separated Flow

Experiments were performed to study the evolution of the heat transfer structure in a separated free shear layer region of an incompressible separated turbulent boundary layer flow behind a backward-facing step. While there is an abundance of velocity field measurements of separated flows, heat transfer measurements are rather scarce, thus limiting assessment of the heat transfer physics and its accurate modeling. The purpose of the paper is twofold: to improve an understanding of effects of flow separation on heat transfer characteristics, and to provide data for turbulence modeling and computation. The boundary layer upstream of the step was turbulent and fully developed. A constant temperature surface boundary condition was imposed upstream and downstream of the step for the heat transfer study. An internal mixing-layer like flow forms and grows from the step lip within the original boundary layer. The turbulent structure of the flow evolving downstream, however, does not switch immediately to that of a mixing layer over the entire shear layer thickness. Measurements of mean and fluctuating velocity and temperature fields indicate that the internal layer spreads gradually in the transverse direction while the outer part of the original boundary layer is effectively unperturbed. The results in this paper have not been previously reported.

Jovic, S.↗
NASA NTRS1982

Near-wall similarity in the three-dimensional turbulent boundary layers. III - Shear-driven flow results

Ten of eleven proposed three-dimensional similarity models identified in the literature are evaluated with direct wall shear, velocity field, and pressure gradient data from a three-dimensional shear-driven boundary layer flow. Results define an upper limit on velocity vector skewing for each model's predictive ability. When combined with earlier results for pressure-driven flows, each model's predictive ability with and without pressure gradients is summarized. The utility of some two-dimensional type indirect wall shear measurement methods and wall shear inference methods from near-wall velocity measurements for three-dimensional flows is also discussed.

Pierce, F. J.↗
NASA NTRS1987

Transition from laminar to turbulent flow in separated shear layers

The location of boundary layer separation may be predicted by either semiempirical criteria or by various computer codes written for such calculations; attention is presently given to the streamwide length from separation to transition, denoted by Re(sL). It is demonstrated that the unit Reynolds number, a feature of the transition phenomenon implicit in the data of Schmidt et al. (1985) and overlooked in previous investigations, must be considered in future work.

Potter, J. Leith↗
NASA NTRS1977

Boundary layer shear stress in subsonic and supersonic flow

A wide range of shear stress distributions for turbulent boundary layers is examined. A solution for the shear stress in terms of the mean flow is obtained for the limiting case of large Reynolds numbers. Attention is given to turbulent boundary layer shear stress, zero pressure gradient flow, increasing pressure gradient flow, and decreasing pressure gradient flow.

Sandborn, V. A.↗
NASA NTRS1982

Measurements in a pressure-driven and a shear-driven three-dimensional turbulent boundary layer

Results of mean velocity field, wall static pressure field and simultaneous, direct force measurements of the local wall shear stress magnitude and direction are reported for a pressure-driven and a shear-driven three-dimensional turbulent boundary layer. These data, particularly the direct force local wall shear data, were obtained to test the validity of several of the near-wall similarity models proposed in the literature for such flows.

Pierce, F. J.↗
NASA NTRS1988

Evidence of Reynolds number sensitivity in supersonic turbulent shocklets

A local shock wave can destroy the evolution of supersonic combustion in a scramjet. The Reynolds number correlation of the systems of internal shock waves produced in such turbulent free shear layers are presently noted to imply that a direct connection with turbulence intensity exists. By way of this connection, as well as the adjustability of the Reynolds number, opportunities emerge for the control of turbulent shocklets; this will in turn allow control of their influence on supersonic mixing.

Johnson, J. A., III↗
NASA NTRS2004

Modeling Compressibility Effects in High-Speed Turbulent Flows

Man has strived to make objects fly faster, first from subsonic to supersonic and then to hypersonic speeds. Spacecraft and high-speed missiles routinely fly at hypersonic Mach numbers, M greater than 5. In defense applications, aircraft reach hypersonic speeds at high altitude and so may civilian aircraft in the future. Hypersonic flight, while presenting opportunities, has formidable challenges that have spurred vigorous research and development, mainly by NASA and the Air Force in the USA. Although NASP, the premier hypersonic concept of the eighties and early nineties, did not lead to flight demonstration, much basic research and technology development was possible. There is renewed interest in supersonic and hypersonic flight with the HyTech program of the Air Force and the Hyper-X program at NASA being examples of current thrusts in the field. At high-subsonic to supersonic speeds, fluid compressibility becomes increasingly important in the turbulent boundary layers and shear layers associated with the flow around aerospace vehicles. Changes in thermodynamic variables: density, temperature and pressure, interact strongly with the underlying vortical, turbulent flow. The ensuing changes to the flow may be qualitative such as shocks which have no incompressible counterpart, or quantitative such as the reduction of skin friction with Mach number, large heat transfer rates due to viscous heating, and the dramatic reduction of fuel/oxidant mixing at high convective Mach number. The peculiarities of compressible turbulence, so-called compressibility effects, have been reviewed by Fernholz and Finley. Predictions of aerodynamic performance in high-speed applications require accurate computational modeling of these "compressibility effects" on turbulence. During the course of the project we have made fundamental advances in modeling the pressure-strain correlation and developed a code to evaluate alternate turbulence models in the compressible shear layer.

Sarkar, S.↗
NASA NTRS1982

Turbulent solution of the Navier-Stokes equations for an inhomogenous developing shear layer

To study the nonlinear physics of inhomogeneous turbulent shear flow, the unaveraged Navier-Stokes equations are solved numerically. For initial conditions a three-dimensional cosine velocity fluctuation and a mean-velocity profile with a step are used. Although the initial conditions are nonrandom. The flow soon becomes turbulent. Concentrated turbulent energy develops near the plane where the mean velocity gradient is initially infinite. The terms in the one-point correlation equation for turbulent energy, including those for the diffusion and production of turbulence, are calculated, the diffusion terms tend to make the turbulence more homogeneous.

Deissler, R. G.↗
NASA NTRS1991

Evolution and dynamics of shear-layer structures in near-wall turbulence

Near-wall flow structures in turbulent shear flows are analyzed, with particular emphasis on the study of their space-time evolution and connection to turbulence production. The results are obtained from investigation of a database generated from direct numerical simulation of turbulent channel flow at a Reynolds number of 180 based on half-channel width and friction velocity. New light is shed on problems associated with conditional sampling techniques, together with methods to improve these techniques, for use both in physical and numerical experiments. The results clearly indicate that earlier conceptual models of the processes associated with near-wall turbulence production, based on flow visualization and probe measurements need to be modified. For instance, the development of asymmetry in the spanwise direction seems to be an important element in the evolution of near-wall structures in general, and for shear layers in particular. The inhibition of spanwise motion of the near-wall streaky pattern may be the primary reason for the ability of small longitudinal riblets to reduce turbulent skin friction below the value for a flat surface.

Johansson, Arne V.↗
NASA NTRS1992

Experiments on shear layer mixing at hypervelocity conditions

Utilization of an expansion tube to acquire turbulent, compressible free shear layer data with gases of direct relevance to hypersonic combustion systems (nitrogen, hydrogen, and oxygen) is demonstrated. Visualizations of the free shear layer by laser holographic interferometry and schlieren imaging show a distinctly asymmetric growth rate that is highly preferential toward the lower speed (secondary stream) side. For the nitrogen/nitrogen case, for which the convective velocity was lowest and convective Mach number highest, the growth rate on the primary side was virtually zero until the mixing layer reached the opposite (secondary) wall.

Erdos, John↗