Search NASA⌕ Search

SEARCH · Search NASA

Results for “submicron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Investigation of shock-induced separation of a turbulent boundary layer using laser velocimetry

Boundary-layer measurements realized by laser velocimetry are presented for a Mach 2.9, two-dimensional, shock-wave/turbulent boundary-layer interaction containing an extensive region of separated flow. Mean velocity and turbulent intensity profiles were obtained from upstream of the interaction zone to downstream of the mean reattachment point. The superiority of the laser velocimeter technique over pressure sensors in turbulent separated flows is demonstrated by a comparison of the laser velocimeter data with results obtained from local pitot and static pressure measurements for the same flow conditions. The locations of the mean separation and reattachment points as deduced from the mean velocity measurements are compared to oil-flow visualization results. Representative, velocity probability density functions obtained in the separated flow region are also presented. Critical to the success of this investigation were: (1) the use of Bragg cell frequency shifting and (2) artificial seeding of the flow with submicron light-scattering particles.

Modarress, D.↗
NASA NTRS1976

Electrostatic disruption of lunar dust particles

The possibility that dust particles might explode catastrophically on the lunar surface due to electrostatic charging is examined. For the dark side along the terminator zone, dust balls and compact stony particles of micron and submicron sizes will be blown up if their surface potential is as low as a kilovolt negative. This mechanism does not operate on the sunlit side because the surface potential is only 3.5-20 volts positive.

Rhee, J. W.↗
NASA NTRS1976

Stratospheric aerosols and climatic change

Generated primarily by volcanic explosions, a layer of submicron silicate particles and particles made of concentrated sulfuric acids solution is present in the stratosphere. Flights through the stratosphere may be a future source of stratospheric aerosols, since the effluent from supersonic transports contains sulfurous gases (which will be converted to H2SO4) while the exhaust from Space Shuttles contains tiny aluminum oxide particles. Global heat balance calculations have shown that the stratospheric aerosols have made important contributions to some climatic changes. In the present paper, accurate radiative transfer calculations of the globally-averaged surface temperature (T) are carried out to estimate the sensitivity of the climate to changes in the number of stratospheric aerosols. The results obtained for a specified model atmosphere, including a vertical profile of the aerosols, indicate that the climate is unlikely to be affected by supersonic transports and Space Shuttles, during the next decades.

Baldwin, B.↗
NASA NTRS1976

Some modifications of the theory of colloidal plasmas

Two effects leading to significant modifications of the theory of colloidal plasmas are discussed. The first concerns the fact that depending on the sign of the electric potential on a droplet in a colloidal plasma, the electrons or the ions impact on the droplet with a much higher effective temperature than their background plasma temperature. The analytical expression for this temperature is derived in the first part of the paper. In the second part, it is shown that the electron-droplet collision rate in a wet alkali-metal vapor plasma may be substantially modified by the effect of the attractive potential between a droplet and an electron because of the image of the electron in the droplet. This effect is found to be important when the droplet sizes are in the submicron range.

De, B. R.↗
NASA NTRS1976

Image intensifier tube observations of the OH airglow during the Space Shuttle simulation

The OH airglow studies discussed have evolved from a lead-sulfide-cell scanning photometer to photographic techniques to, currently, image-tube photography. During the Space Shuttle Simulation, photography (35-mm and 16-mm) and filter-wheel photometry of submicron OH airglow were performed aboard the NASA CV990 Airborne Laboratory. Examples of ground-based and airborne photographs are presented for comparison. Analysis of the aircraft data is described.

Peterson, A. W.↗
NASA NTRS1977

Distribution and flux of micrometeoroids

The mass distribution, flux, and distribution in space of the micrometeoroid complex at 1 AU are estimated on the basis of data from Apollo 17 rocks and recent calibrations of solar-flare track-production rates. It is found that the size frequency distribution of microcraters on lunar rocks suggests a bimodal mass distribution of micrometeoroids, but the precise form of the curve requires further definition, particularly insofar as the degree of depletion of particles producing craters 10 to 100 microns in diameter is concerned. Variations in slope with crater-diameter or particle-mass increments are shown to indicate that different processes affect one or more particle populations. Fluxes corresponding to varied lunar surface orientation and residence time are calculated, but no striking difference is observed between the flux of submicron-diameter particles with orbits in the plane of the ecliptic and fluxes of particles with orbits normal to the plane in the solar apex direction.

Morrison, D. A.↗
NASA NTRS1976

Microcraters and solar flare tracks in crystals from carbonaceous chondrites and lunar breccias

Results of microcrater and solar-flare track studies of grains from the interiors of five carbonaceous chondrites and one lunar 'soil breccia' are combined to investigate variations in solar flare intensity, variations in micrometeorite particle flux, characteristics of interplanetary submicron particles, and the probable region in space where the precompaction irradiation occurred. The thickness turnover rate, material loss rate, and other parameters of the regolith-like surface where the meteorites must have formed are determined to a certain extent by considering published data on solar-wind and spallogenic species in the meteorites in conjunction with the present data. It is found that: (1) most irradiation features are most plausibly explained in terms of a regolith origin; (2) the shape of the solar-flare energy spectrum has not changed over the last 4.2 billion years; (3) the flux of small micrometeoroids about 4.2 billion years ago cannot have been more than 4 to 20 times higher than the flux today; and (4) parent-body regolith turnover rates were not extremely high.

Goswami, J. N.↗
NASA NTRS1976

Photometric studies of light scattering above the lunar terminator from Apollo solar corona photography

Excess brightness is found in 70-mm photographs of the solar corona above the lunar terminator during Apollo 15 and 17. Maximum brightness of this scattered light is determined from calibration of image density. The observed excess brightness displays circular symmetry above the lunar-horizon subsolar point, characteristic of forward diffraction scattering from micron or submicron size (solid) grains, and decays rapidly in intensity with altitude and distance from the lunar terminator. The observed brightness cannot be accounted for by a co-orbiting cloud of spacecraft contaminants, but requires a variable lunar dust 'atmosphere' over the terminator regions extending to altitudes in excess of 100 km. To maintain such large masses of lunar fines above the terminator requires either local mass-churning rates in excess of 2 by 10 to the -11th power g/sq cm sec or the assumption of some degree of high-altitude electrostatic suspension to increase the dwell time of individual grains at the altitudes observed. Such a model would reduce mass-churning rates while causing selective erosion/deposition and potential for escape of significant mass from the moon

Mccoy, J. E.↗
NASA NTRS1978

High resolution masks for ion milling pores through substrates of biological interest

The feasibility was investigated of electrochemically oxidizing vapor deposited aluminum coatings to produce porous aluminum oxide coatings with submicron pore diameters and with straight channels normal to the substrate surface. Porous aluminum oxide coatings were produced from vapor deposited aluminum coatings on thin stainless steel (304), copper, Teflon (FEP) and Kapton substrates and also on pure aluminum substrates. Scanning electron microscope examination indicated that porous oxide coatings can be produced with straight channels, appropriate pore diameters and none or minimal intervening residual aluminum. The oxide coatings on the copper and Kapton substrates had the straightest channels and in general were superior to those fabricated on the other substrate materials. For oxide coatings fabricated at 600 V and 300 V, pore diameters were 0.4-0.6, and 0.3 micron with center-to-center spacing of 0.7-0.8, and 0.4 micron, respectively. Estimated direct labor and materials costs to prepare an oxide mask is anticipated to be about $4-$6 per square foot.

Donovan, S. S.↗
NASA NTRS1977

Comparison of predicted and observed solar radiation in an urban area

Measurements of the downward solar radiant flux in the St. Louis area are compared with predictions from an approximate solution to the radiative transfer equation. The atmospheric aerosols were assumed to have a power size distribution and the refractive indices suggested by Fischer (1973) for an urban area. On a relatively clean day, the predictions compared well with observations. On a hazy day, the comparison was poor with the a priori choice of aerosol properties. The particles on the hazy day apparently had more submicron particles than those found in the assumed size distribution, and the particles were considerably less absorbing than those observed by Fischer. These changes could represent the effects of relative humidity and different air mass characteristics.

Bergstrom, R. W.↗
NASA NTRS1978

Some performance tests of a microarea AES

An Auger electron spectroscopy (AES) system which has a submicron analysis capability is described. The system provides secondary electron imaging, as well as micro- and macro-area AES. The resolution of the secondary electron image of an oxidized Al contact pad on a charge-coupled device chip indicates a primary beam size of about 1000 A. For Auger mapping, a useful resolution of about 4000 A is reported

Todd, G.↗
NASA NTRS1975

Density, chemistry, and size distribution of interplanetary dust

Depth/diameter ratios measured for 98 craters in lunar glass targets reveal a broad distribution with a single strong peaking between 0.55 and 0.8. The measured values indicate a mean meteoroid density greater than 1 g/cu cm and probably less than 4 g/cu cm. Microprobe analyses show that typical glass pit liners on silicate targets contain only approximately 0.1% or less of meteoritic material. The size-frequency distribution of meteoroids was analyzed for a fractured glass surface of 60095, and a very steep size distribution of submicron meteoroids is indicated. As in the case of 15205, a dip at approximately 5 micron in the size-frequency distribution is detected.

Brownlee, D. E.↗
NASA NTRS1979

Feasibility study of transit photon correlation anemometer for Ames Research Center unitary wind tunnel plan

A laser transit anemometer measured a two-dimensional vector velocity, using the transit time of scattering particles between two focused and parallel laser beams. The objectives were: (1) the determination of the concentration levels and light scattering efficiencies of naturally occurring, submicron particles in the NASA/Ames unitary wind tunnel and (2) the evaluation based on these measured data of a laser transit anemometer with digital correlation processing for nonintrusive velocity measurement in this facility. The evaluation criteria were the speeds at which point velocity measurements could be realized with this technique (as determined from computer simulations) for given accuracy requirements.

Mayo, W. T., Jr.↗
NASA NTRS1979

A lower limit on the top of Jupiter's haze layer

Remote sensing observations of the Jovian atmosphere at wavelengths ranging from UV to the IR are affected by the presence of haze layers above the visible clouds. These layers are difficult to detect as they generally contain submicron particles. In the present paper, a sequence of Voyager images of high-latitude haze, which extends through the Jovian stratosphere into the mesosphere is presented and discussed.

Cook, A. F., II↗
NASA NTRS1978

Airborne measurements of cloud-forming nuclei and aerosol particles in stabilized ground clouds produced by solid rocket booster firings

Airborne measurements of cloud volumes, ice nuclei and cloud condensation nuclei, liquid particles, and aerosol particles were obtained from stabilized ground clouds (SGCs) produced by Titan 3 launches at Kennedy Space Center, 20 August and 5 September 1977. The SGCs were bright, white, cumulus clouds early in their life and contained up to 3.5 g/m3 of liquid in micron to millimeter size droplets. The measured cloud volumes were 40 to 60 cu km five hours after launch. The SGCs contained high concentrations of cloud condensation nuclei active at 0.2%, 0.5%, and 1.0% supersaturation for periods of three to five hours. The SGCs also contained high concentrations of submicron particles. Three modes existed in the particle population: a 0.05 to 0.1 micron mode composed of aluminum-containing particles, a 0.2 to 0.8 micron mode, and a 2.0 to 10 micron mode composed of particles that contained primarily aluminum.

Hindman, E. E., II↗
NASA NTRS1979

Space environment and lunar surface processes

The development of a general rock/soil model capable of simulating in a self consistent manner the mechanical and exposure history of an assemblage of solid and loose material from submicron to planetary size scales, applicable to lunar and other space exposed planetary surfaces is discussed. The model was incorporated into a computer code called MESS.2 (model for the evolution of space exposed surfaces). MESS.2, which represents a considerable increase in sophistication and scope over previous soil and rock surface models, is described. The capabilities of previous models for near surface soil and rock surfaces are compared with the rock/soil model, MESS.2.

Comstock, G. M.↗
NASA NTRS1980

Stratospheric aerosol modification by supersonic transport operations with climate implications

The potential effects on stratospheric aerosois of supersonic transport emissions of sulfur dioxide gas and submicron size soot granules are estimated. An interactive particle-gas model of the stratospheric aerosol is used to compute particle changes due to exhaust emissions, and an accurate radiation transport model is used to compute the attendant surface temperature changes. It is shown that a fleet of several hundred supersonic aircraft, operating daily at 20 km, could produce about a 20% increase in the concentration of large particles in the stratosphere. Aerosol increases of this magnitude would reduce the global surface temperature by less than 0.01 K.

Toon, O. B.↗
NASA NTRS1979

Imaging and polarimetry with the Pioneer Venus Orbiter Cloud Photopolarimeter

The objective of the Orbiter Cloud Photopolarimeter (OCPP) on board the Pioneer Venus Orbiter spacecraft is twofold: (1) to determine the physical properties, vertical and horizontal distribution and the temporal variability of the haze and cloud aerosols on Venus; and (2) to record in images made in the near ultraviolet the varying cloud morphology and the short- and long-term character of the apparent cloud motions. Early images exhibit numerous cloud features and apparent circulation patterns similar to those observed by Mariner 10 in 1974. Features of the polar regions are identified. Polarimetry measurements indicate that the main visible cloud layer of 1-micron-radius sulfuric acid droplets is covered at least in the morning terminator region with a thin haze layer consisting of submicron-size particles. The OCPP performance appears to be excellent.

Travis, L. D.↗