Search NASA⌕ Search

SEARCH · Search NASA

Results for “Realization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Plasma Muon Beam Cooling for HEP

Ionization cooling has the potential to shrink the phase space of a muon beam by a factor of 10⁶ within the muons’ short lifetime (2.2 µs) because the collision frequency in a cooling medium is extremely high compared to conventional beam cooling methods. It has been realized that ionization cooling inherently produces a plasma of free electrons inside the absorber material, and this plasma can have an important effect on the muon beam. In particular, under the right circumstances, it can both improve the rate of cooling and reduce the equilibrium emittance of the beam. This has the potential to improve the performance of muon facilities based on muon cooling; in particular a future muon collider. We describe how this project will integrate Plasma muon beam cooling into both the basic Helical Cooling Channel (HCC) and extreme Parametric-resonance Ionization Cooling (PIC) techniques. This potentially whole new approach to muon cooling has exciting prospects for significantly reduced muon beam emittance.

43 PARTICLE ACCELERATORS↗

High-Field Design Concept for Second Interaction Region of the Electron-Ion Collider

Efficient realization of the scientific potential of the Electron Ion Collider (EIC) calls for addition of a future second Interaction Region (2nd IR) and a detector in the RHIC IR8 region after the EIC project completion. The second IR and detector are needed to independently cross-check the results of the first detector, and to provide measurements with complementary acceptance. The available space in the existing RHIC IR8 and maximum fields achievable with NbTi superconducting magnet technology impose constraints on the 2nd IR performance. Since commissioning of the 2nd IR is envisioned in a few years after the first IR, such a long time frame allows for more R&D on the Nb₃Sn magnet technology. Thus, it could provide a potential alternative technology choice for the 2nd IR magnets. Presently, we are exploring its potential benefits for the 2nd IR performance, such as improvement of the luminosity and acceptance, and are also assessing the technical risks associated with use of Nb₃Sn magnets. In this paper, we present the current progress of this work.

43 PARTICLE ACCELERATORS↗

Development of combined function dipole-quadrupole PMQs magnets for NSLS-II upgrade

This paper focuses on the R&D performed for the development of permanent magnets-based dipoles-quadrupoles combined function magnets (PMQs) for the future NSLSII upgrade “complex bend” lattice (CB). This new lattice uses PMQs that provide both bending (dipole) and strong focusing (quadrupole) magnetic field on the electron beam. The permanent magnet (PM) technology is suitable for the high magnetic field strengths (0.5 T, 130 T/m) required for such combine function magnets. PM technology leads to a compact magnet design that is essential in realizing the complex bend lattice concept, as well as a passive magnet solution which does not require electrical power supply reducing power consumption by ~ 80% (from 1.7 MW to 0.3 MW for NSLS-II). Two PMQs magnets designs are under consideration: A hybrid design that use both PM and soft iron poles, and Halbach type that is a pure PM design. Both PMQs designs present challenges in achieving the specified magnetic field quality due to their higher sensitivity to errors (mechanical tolerances and PM properties). This paper presents cost-effective designs and prototypes results for hybrid and Halbach PMQs, addressing various technical challenges while meeting the field requirements of the complex bend lattice for the NSLS-II upgrade.

N'gotta, Patrick [Brookhaven]↗

On exotic consistent anomalies in (1+1)$d$: A ghost story

We revisit ’t Hooft anomalies in (1+1) d d non-spin quantum field theory, starting from the consistency and locality conditions, and find that consistent U(1) and gravitational anomalies cannot always be canceled by properly quantized (2+1) d d classical Chern-Simons actions. On the one hand, we prove that certain exotic anomalies can only be realized by non-reflection-positive or non-compact theories; on the other hand, without insisting on reflection-positivity, the exotic anomalies present a caveat to the inflow paradigm. For the mixed U(1) gravitational anomaly, we propose an inflow mechanism involving a mixed U(1) \times × SO(2) classical Chern-Simons action with a boundary condition that matches the SO(2) gauge field with the (1+1) d d spin connection. Furthermore, we show that this mixed anomaly gives rise to an isotopy anomaly of U(1) topological defect lines. The isotopy anomaly can be canceled by an extrinsic curvature improvement term, but at the cost of creating a periodicity anomaly. We survey the holomorphic bc b c ghost system which realizes all the exotic consistent anomalies, and end with comments on a subtlety regarding the anomalies of finite subgroups of U(1).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exotic invertible phases with higher-group symmetries

We investigate a family of invertible phases of matter with higher-dimensional exotic excitations in even spacetime dimensions, which includes and generalizes the Kitaev’s chain in 1+1d. The excitation has \mathbb{Z}_2 ℤ 2 higher-form symmetry that mixes with the spacetime Lorentz symmetry to form a higher group spacetime symmetry. We focus on the invertible exotic loop topological phase in 3+1d. This invertible phase is protected by the \mathbb{Z}_2 ℤ 2 one-form symmetry and the time-reversal symmetry, and has surface thermal Hall conductance not realized in conventional time-reversal symmetric ordinary bosonic systems without local fermion particles and the exotic loops. We describe a UV realization of the invertible exotic loop topological order using the SO(3)_- S O ( 3 ) − gauge theory with unit discrete theta parameter, which enjoys the same spacetime two-group symmetry. We discuss several applications including the analogue of ``fermionization’’ for ordinary bosonic theories with \mathbb{Z}_2 ℤ 2 non-anomalous internal higher-form symmetry and time-reversal symmetry.

Hsin, Po-Shen↗

Constructing non-Abelian quantum spin liquids using combinatorial gauge symmetry

We construct Hamiltonians with only 1- and 2-body interactions that exhibit an exact non-Abelian gauge symmetry (specifically, combinatiorial gauge symmetry). Our spin Hamiltonian realizes the quantum double associated to the group of quaternions. It contains only ferromagnetic and anti-ferromagnetic ZZ Z Z interactions, plus longitudinal and transverse fields, and therefore is an explicit example of a spin Hamiltonian with no sign problem that realizes a non-Abelian topological phase. In addition to the spin model, we propose a superconducting quantum circuit version with the same symmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Artificially Structured Semiconductors to Model Novel Quantum Phenomena

Award Period: September 1st, 2013 through February 15th, 2017 Submitted to the USDOE Office of Basic Energy Sciences By Aron Pinczuk and Shalom J. Wind Department of Applied Physics and Applied Mathematics Columbia University New York, NY 10027 January 2017 Award # DE-SC0010695 ABSTRACT Research in this project seeks to design, create and study a class of tunable artificial quantum structures in order to extend the range and scope of new and exciting physical phenomena and to explore the potential for new applications. Advanced nanofabrication was used to create an external potential landscape that acts as a lattice of confinement sites for electrons (and/or holes) in a two-dimensional electron gas in a high perfection semiconductor in such a manner that quantum interactions between different sites dictate the significant physics. Our current focus is on ‘artificial graphene’ (AG) in which a set of quantum dots (or sites) are patterned in a honeycomb lattice. The combination of leading edge nanofabrication with ultra-pure semiconductor materials in this project extends the frontier for small period, low-disorder AG systems, enabling the exploration of graphene physics in a semiconductor platform. TECHNICAL DESCRIPTION Contemporary condensed matter science has entered an era of discovery of new low-dimensional materials, such as graphene and other atomically thin materials, that exhibit exciting new physical phenomena that were previously inaccessible. Concurrent with the discovery and development of these new materials are impressive advancements in nanofabrication, which offer an ever-expanding toolbox for creating a myriad of high quality patterns at nanoscale dimensions. This project started about four years ago. Among its major achievements are the realizations of very small period artificial lattices with honeycomb topology in GaAs quantum wells. In our most recent work the periods of the ‘artificial graphene’ (AG) lattices extend down to 40 nm. These small periods are about three times smaller than previously reported in GaAs quantum wells. This milestone establishes a new state-of-the-art in fields of research and nanofabrication. In experiments using optical scattering methods we uncovered evidence that free electrons in the small period AG lattices display novel features that arise from the symmetry of the honeycomb lattice. These achievements create semiconductor platforms for explorations of novel states and effects that offer opportunities to create quasiparticles with tunable character. The quest for the discovery of novel quantum physics by nanofabrication of ‘artificial structures’ in semiconductor quantum structures overlaps with the development of quantum simulators. Nanopatterns were created at Columbia University by the group of co-PI Shalom Wind using a 100keV e-beam nanolithography instrument (along with associated processing) that is part of the Columbia Nano Initiative. Optical experiments were carried out in the group of PI Aron Pinczuk. GaAs/AlGaAs quantum wells(QWs) of world-class perfection that serve as electron hosts are the starting material grown by molecular beam epitaxy (MBE) by our partners Dr. Loren Pfeiffer (Princeton Univ.) and Prof. Michael Manfra (Purdue Univ.). The inductively coupled plasma reactive ion etching (ICP-RIE) was carried out at the PRISM Micro/Nano Fabrication Laboratory of Princeton University. Dr. Vittorio Pellegrini (Istituto Italiano di Tecnologia, Genoa, Italy) has contributed critical insight on this research. Two graduate students in this project Sheng Wang and Diego Scarabelli, graduated in the summer/fall of 2016. Dr. Yuliya Kuznetsova has been a postdoc in the group. The current work is led by Dr. Lingjie Du, a postdoctoral scientist that joined the group of the PI on October 15th, 2016. Since the start of this project we have focused primarily on developing protocols towards the fabrication of the artificial lattices and in the implementation of characterization methods to identify the new electron states that are created. A major milestone has been the realization of the Dirac cones that emerge in honeycomb lattices. In the next phases of this project, and as we achieve milestones, we wish to expand our experimental platform so that we will be better positioned to access emergent novel quantum behavior and phases of electrons in artificial lattices designed and fabricated with ‘exquisite’ precision. The AG lattices with greatly reduced disorder from nano-processing that we have already created demonstrate that we are poised for the next stage exploration of graphene physics and applications in semiconductor quantum structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

California-Specific Power-to-Hydrogen and Power-to-Gas Business Case Evaluation

Flexible operation of electrolysis systems represents an opportunity to reduce the cost of hydrogen for a variety of end-uses while also supporting grid operations and thereby enabling greater renewable penetration. California is an ideal location to realize that value on account of growing renewable capacity and markets for hydrogen as a fuel cell electric vehicle (FCEV) fuel, refineries, and other end-uses. Shifting the production of hydrogen to avoid high cost electricity and participation in utility and system operator markets along with installing renewable generation to avoid utility charges and increase revenue from the Low Carbon Fuel Standard (LCFS) program can result in around $2.5/kg (21%) reduction in the production and delivery cost of hydrogen from electrolysis. This reduction can be achieved without impacting the consumers of hydrogen. Additionally, future strategies for reducing hydrogen cost were explored and include lower cost of capital, participation in the Renewable Fuel Standard program, capital cost reduction, and increased LCFS value. Each must be achieved independently and could each contribute to further reductions. Using the assumptions in this study found a 29% reduction in cost if all future strategies are realized. Flexible hydrogen production can simultaneously improve the performance and decarbonize multiple energy sectors. The lessons learned from this study should be used to understand near-term cost drivers and to support longer-term research activities to further improve cost effectiveness of grid integrated electrolysis systems.

30 DIRECT ENERGY CONVERSION↗

Developing Ultra-small Scale Mechanical Testing Methods and Microstructural Investigation Procedures for Irradiated Materials

Nuclear materials are an essential aspect of nuclear engineering. While great effort is spent on designing more advanced reactors or enhancing a reactor’s safety, materials have been the bottleneck of most new developments. The designs of new reactor concepts are driven by neutronic and thermodynamic aspects, leading to unusual coolants (liquid metal, liquid salt, gases), higher temperatures, and higher radiation doses than conventional light water reactors have. However, any (nuclear) engineering design must consider the materials used in the anticipated application in order to ever be realized. Designs which may look easy, simple and efficient considering thermodynamics or neutronic aspects can show their true difficulty in the materials area, which then prevents them from being deployed. In turn, the materials available are influencing the neutronic and thermodynamic designs and therefore must be considered from the beginning, requiring close collaborations between different aspects of nuclear engineering. If a particular design requires new materials, the licensing of the reactor must be considered, but licensing can be a costly and time consuming process that results in long lead times to realize true materials innovation.

36 MATERIALS SCIENCE↗

Improved InGaN LED System Efficacy and Cost via Droop Reduction (Final CRADA Report)

We propose to develop blue InGaN pump LEDs with a high-current (100A/cm 2 ) external quantum efficiency gain of 13% over the current state of the art, to be immediately realized in commercial products. Current state-of-the-art LEDs achieve peak efficiency at ~10A/cm 2 drive current, and reduce to ~86% of peak efficiency by 100A/cm 2 – the so-called efficiency droop. While further improvements in InGaN material quality will improve the low flux/$\$$ regime that is commercially irrelevant, improvements in high-current efficiency (~100A/cm 2 ) can result in tremendous gains in flux/$\$$ and wall-plug efficiency. To realize these gains in efficiency and system cost, development efforts should focus on mitigating droop.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Sun Grant/DOE Regional Feedstock Partnership: Final Technical Report

The U.S. Department of Energy (DOE) and the Sun Grant Initiative initiated the Regional Feedstock Partnership (referred to as the Partnership) in 2007 primarily to address information gaps associated with the likelihood for realization of the sustainable and reliable production of a billion-tons of biomass annually to support the U.S. bioenergy industry by the year 2030. Publication of The Technical Feasibility of a Billion-Ton Annual Supply (Perlack et al., 2005) in 2005, with its associated yield assumptions, led to the realization that the yield goals and assumptions utilized in that analysis required careful validation. To achieve the overall goal of validating key yield assumptions, the following objectives were developed: 1. Establishment of replicated field trials across regions to determine the impact of crop residue removal (primarily corn and small grains) on future grain yields and soil health. 2. Establishment of replicated field trials of some of the most promising dedicated energy crops (herbaceous annuals and perennials, as well as woody perennials) to demonstrate the potential performance of these feedstocks across the U.S. 3. Assessment of feedstock resources to be used to estimate a sustainable national supply potential. Teams composed of representatives from Land Grant Universities, USDA ARS, DOE National Laboratories, industry, and other federal agencies were identified and assembled to address each of these objectives. For Objective 1, members of the USDA ARS’ Resilient Economic Agricultural Practices (REAP) team combined with university personnel to leverage on-going work and established new trials to determine sustainable corn residue removal rates. In addition, universities across the continental U.S. conducted surveys of published past research to define parameters for the use of cereal grain residue (primarily wheat) as a biomass feedstock. For Objective 2, and based on input from DOE, USDA, Land Grant university scientists, and others, several herbaceous and woody energy crop species were selected for new or further evaluation across wide geographic areas as cellulosic feedstock sources. Species teams were organized to assess the yield potential of candidate herbaceous feedstocks including sorghum, energycane, Miscanthus x giganteus (hereafter referred to as miscanthus), switchgrass, and mixed perennial species (primarily grasses and some legumes) on Conservation Reserve Program (CRP) land. Woody species will be critical components of the bioenergy sector; therefore, species teams were also organized for shrub willow and hybrid poplar (Populus spp.). Field trials of each species were utilized to determine yield potential across the U.S. For Objective 3, a GIS resource team was organized with representatives from each of the five Sun Grant regions. While some regional assessments were made, the multi-institutional team decided that the group from Oregon State University would utilize their PRISM ELM model to estimate national yield potential of the various species evaluated. The following are key outcomes and impacts • The Partnership demonstrated the production potential of diverse herbaceous and woody feedstocks across much of the U.S. for 5-7 consecutive growing seasons. Long-term studies such as this are not commonly possible due to limitations in funding cycles. • Long-term field trials were valuable in demonstrating the importance of agronomic management practices and genetic resources to yield of sorghum, switchgrass, miscanthus, energycane, CRP mixed perennial grasses, poplar, and willow. • National yield potential maps were developed for all species evaluated in the Partnership. • Sustainable corn stover removal rates were quantified for use by producers, harvesters, and commercial lignocellulosic biorefineries. • Data from the Partnership field trials not only validated initial Billion Ton estimates, but were instrumental in developing both the Billion Ton Update in 2011, and especially the 2016 Billion Ton Report. • The Partnership provided the opportunity to assemble and conserve a poplar germplasm collection that contains more than 20,000 clones for use in breeding programs. New clones resulting from crosses made using this germplasm collection have resulted in significantly improved cultivars that could be scaled up and deployed. • Further validation of improved yields of new varieties/cultivars of biomass sorghum, energycane, hybrid poplars, and shrub willows was produced by the Partnership. • The Partnership demonstrated the potential of energycane in northern parts of the southeastern U.S., particularly in relation to sugarcane varieties. • For certain feedstocks (e.g., CRP mixed grasses, switchgrass, willow, and poplar), production economics were ascertained through Partnership field trials. • Biomass samples collected as part of the Partnership are also being used to populate Idaho National Laboratory’s Bioenergy Feedstock Library. • Because of the size and scope of the Partnership, workforce development was a key component and outcome. Numerous undergraduate students (25), graduate students (15 MS and 8 PhD), and postdoctoral researchers (7) were trained by Partnership participants. This will help to prepare individuals for careers in the emerging fields of plant breeding, biomass production, feedstock supply logistics, and biomass conversion processes. • More than 130 scientific publications have been authored by Partnership team members. Numerous other presentations, outreach publications, book chapters, and websites have also been developed to further the continued development of the bioeconomy.

09 BIOMASS FUELS↗

Extreme Heterogeneity 2018 - Productive Computational Science in the Era of Extreme Heterogeneity: Report for DOE ASCR Workshop on Extreme Heterogeneity

The 2018 Basic Research Needs Workshop on Extreme Heterogeneity identified five Priority Research Directions for realizing the capabilities needed to address the challenges posed in this era of rapid technological change. This report captures the outcomes of that workshop. In the context of extreme heterogeneity, it defines basic research needs and opportunities in computer science research to develop smart and trainable operating and runtime systems, programming environments, and predictive tools that will make future systems easier to adapt to scientists’ computing needs and easier for facilities to deploy securely.

97 MATHEMATICS AND COMPUTING↗

A platform for quantum information and large-scale entanglement with Rydberg atoms in programmable optical potentials

Large-scale quantum systems with controllable interactions are important for understanding complex phenomena in nature, and are the basis for advanced quantum technologies. Realizing a controllable platform for controlling, understanding, and ultimately harnessing the entanglement is an outstanding challenge in quantum science. This project demonstrated reconfigurable arrays of individually-trapped ultracold atoms, thus realizing a platform that could demonstrate large-scale quantum entanglement with the addition of strong inter-atomic interactions. Arrays of more than 50 trap sites were formed via digital holography and a high-numerical aperture imaging system that featured in-situ trap diagnostics and single-atom imaging resolution. We further discovered a new implementation of a controlled-phase gate that utilized coherent excitation to Rydberg states. This method will enable robust entanglement protocols in many-atom systems such as the one developed here.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flat Ultrathin Metasurface Parabolic Reflector for THz Applications

The efficient use of terahertz (THz) radiation promises to foster many practical applications including nondestructive spectroscopy, imaging, high-speed communication, biological and chemical sensing. In contrast to the neighboring bands, THz technology is relatively underdeveloped due to the lack of efficient and compact components/devices in this frequency regime. Natural materials has only limited responses at terahertz frequencies, therefore, artificial materials such as metamaterials have been explored for realizing terahertz devices. Metasurfaces are two-dimensional analogue of metamaterials, which enable unconventional control of scattering phase at the material interface by tuning the size and shape of subwavelength resonators. A full 2π phase shift from these artificial materials makes it possible to shape the wavefront of the outgoing light to realize anomalous reflection/refraction, flat lens, quarter wave plate, and other applications.

47 OTHER INSTRUMENTATION↗

Codes and Standards Update: February 2019

The goal of the DOE OE Energy Storage System Safety Roadmap is to foster confidence in the safety and reliability of energy storage systems. There are three interrelated objectives to support the realization of that goal: research, codes and standards(C/S)and communication/coordination. The objective focused on C/S is "To apply research and development to support efforts that refocused on ensuring that codes and standards are available to enable the safe implementation of energy storage systems in a comprehensive, non-discriminatory and science-based manner." The following activities support that objective and realization of the goal: (a.) Review and assess C/S which affect the design, installation, and operation of energy storage systems(ESS). (b.) Identify gaps in knowledge that require research and analysis that can serve as a basis for criteria in those C/S. (c.) Identify areas in C/S that are potentially in need of revision or enhancement and can benefit from activities conducted under research and development. (d.) Develop input for new or revisions to existing C/S through individual stakeholders, facilitated task forces, or through laboratory staff supporting these efforts. The purpose of this Codes and Standards Update is to support the above activities by providing information on efforts being conducted by U.S. standards developing organizations(SDOs)and other entities that are focused on ESS safety. The information is organized relative to the scope of each document in relation to ESS from the "macro to the micro"(e.g., from overarching covering considerable scope ,to installation specific, to ESS and then ESS components). Note that more macro documents are also likely to adopt by reference more micro documents.

25 ENERGY STORAGE↗

Concept of the Complex Bend

Modern synchrotron lattices follow Multi-­Bend Achromat approach and realize low emittance by arranging small horizontal beta-­function and dispersion in the bends. In this paper we propose another optics solution aimed to reach low emittance by using a lattice element that we named as “Complex Bend”. The Complex Bend corresponds to a strong alternate focusing distributed along the bend so to maintain the beta-function and dispersion oscillating at low values. Comprising the ring lattice out of Complex Bends instead of regular dipoles will minimize the Ң-­function and reduce the horizontal emittance while localizing bending to a small fraction of the storage ring circumference. The latter should help to gain more space for Insertion Devices. In the following, we present the concept of Complex Bend, considerations on the choice of its optimal parameters, as well as, thoughts of its practical realization. This paper gives a snapshot where our current studies stand and does not pretend to be a complete description of the Complex Bend engineering design and integration of this element into a specific ring lattice.

36 MATERIALS SCIENCE↗

Atomically Defined Edge-Doping of Graphene Nanoribbons for Mesoscale Electronics

The outstanding transformative potential of graphene, an infinite two-dimensional sheet of carbon atoms tightly packed into a honeycomb lattice, has been recognized mostly due to its exceptionally high electric conductivity, thermal conductivity, and tensile strength. These undeniably very desirable properties, however, represent only a very small facet of the true potential of all-sp2 carbon materials and its promise to revolutionize the field of molecular electronics. Graphene's most unusual characteristics emerge when the infinite macroscopic sheet is scaled down to nanometer dimensions. The exploration, realization, and implementation of these truly exotic magnetic and electronic properties rely on the development of innovative synthetic strategies that provide atomically precise control over the self-assembly of mesoscale objects. While traditional device architectures based on inorganic semiconductors have been fabricated using a top-down approach, we pursued a diametrically opposite strategy. Our design of a new generation of high-performance electronic materials relies on a modular bottom-up strategy. This highly multidisciplinary research program has been rooted in the synthesis of functional organic materials with precisely defined properties, their controlled assembly into hierarchical structures, and the evaluation of their performance at the molecular and the macroscopic scale. A part of this research program we have developed the chemical tools required to synthesize and to fine-tune the physical properties of graphene nanoribbons (GNR) with atomic precision. We further demonstrated that the innovative techniques and the expanded knowledge can be used to rationally tailor desired physical properties and function into nanometer-scale carbon-based electronic devices; e.g. transistors as logic gates in computing, data storage media based on electrically gated spin valves, or molecular amplifiers, all functionally integrated in atomically defined GNRs. We demonstrated the design and experimental realization of a rationally engineered graphene nanoribbon superlattice that hosts a 1D array of symmetry-protected topological states. We developed a hierarchical bottom-up fabrication strategy for graphene nanoribbons that preferentially exhibit a single heterojunction interface rather than a random statistical sequence of junctions along the ribbon. We reported the bottom-up synthesis of a series of atomically precise graphene nanoribbons featuring trigonal planar heteroatom dopants (nitrogen, oxygen, and sulfur) along the edges that induce a narrowing of the intrinsic band gap by ~0.2–0.3 eV per dopant atom. We reported the bottom-up synthesis of a graphene nanoribbon heterostructure featuring a highly tunable porphyrin quantum dot embedded at the center of a solution processable graphene nanoribbon. We reported a new technique for fabricating bottom-up graphene nanoribbon heterojunctions through a late-stage chemical transformation that results in atomically sharp heterojunction structures from a single precursor. We demonstrated the intrinsic performance enhancement of a composite material comprised of gold nanoparticles (AuNPs) embedded in a bottom-up synthesized graphene nanoribbon matrix for the electrocatalytic reduction of CO 2 . We developed a scalable, solution-based approach toward the synthesis of an exotic class of polycyclic aromatic hydrocarbons that exhibit unusual electronic and magnetic properties in the ground state. We reported the bottom-up synthesis and characterization of atomically-defined graphene nanoribbons featuring a regioregular pattern of group III dopant atoms (boron) along the backbone of the ribbon.

36 MATERIALS SCIENCE↗

A Monte Carlo Rectangle Packing Algorithm for Identifying Likely Spatial Distributions of Final Closure Cap Subsidence in the E-Area Low-Level Waste Facility

A Monte Carlo rectangle packing algorithm, summarized in Figure ES-1, has been developed to provide insights into the likely spatial distribution of subsided areas or holes in the final closure cap for the E-Area Low-Level Waste Facility (ELLWF) resulting from the placement of non-crushable waste containers within slit and engineered trench disposal units. Using historical records provided by Solid Waste Management as an indicator of future waste streams, a probability distribution of unique waste containers was constructed, and Monte Carlo sampling was used to sequentially select waste containers for placement in a rectangular region bounded by the disposal unit footprint. Within this Monte Carlo approach, the probability of any container type being selected is weighted by the fractional abundance relative to all other container types. For each Monte Carlo realization, the frequency of non-crushable waste containers appearing at each location on a spatially discretized mesh is updated. After many realizations, the location(s) with the highest frequencies of non-crushable waste containers are regarded as the most likely locations to experience subsidence (i.e., for a hole to form). Utilizing this approach has enabled the down-selection of a computationally intractable set of subsidence hole combinations to be explored in three-dimensional finite element groundwater flow and contaminant transport models. Such an approach can be applied to a number of different packaging problems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗