Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Imaging, microscopic analysis, and modeling of a CdTe module degraded by heat and light

Photoluminescence (PL), electroluminescence (EL), and dark lock-in thermography are collected during stressing of a CdTe module under one-Sun light at an elevated temperature of 100 degrees C. The PL imaging system is simple and economical. The PL images show differing degrees of degradation across the module and are less sensitive to effects of shunting and resistance that appear on the EL images. Regions of varying degradation are chosen based on avoiding pre-existing shunt defects. These regions are evaluated using time-of-flight secondary ion-mass spectrometry and Kelvin probe force microscopy. Reduced PL intensity correlates to increased Cu concentration at the front interface. Numerical modeling and measurements agree that the increased Cu concentration at the junction also correlates to a reduced space charge region.

14 SOLAR ENERGY↗

Tailoring Kinetics on a Topological Insulator Surface by Defect-Induced Strain: Pb Mobility on Bi 2 Te 3

Heteroepitaxial structures based on Bi2Te3-type topological insulators (TIs) exhibit exotic quantum phenomena. For optimal characterization of these phenomena, it is desirable to control the interface structure during film growth on such TIs. In this process, adatom mobility is a key factor. We demonstrate that Pb mobility on the Bi2Te3(111) surface can be modified by the engineering local strain, ε, which is induced around the point-like defects intrinsically forming in the Bi2Te3(111) thin film grown on a Si(111)-7 × 7 substrate. Scanning tunneling microscopy observations of Pb adatom and cluster distributions and first-principles density functional theory (DFT) analyses of the adsorption energy and diffusion barrier Ed of Pb adatom on Bi2Te3(111) surface show a significant influence of ε. Surprisingly, Ed reveals a cusp-like dependence on ε due to a bifurcation in the position of the stable adsorption site at the critical tensile strain εc ≈ 0.8%. This constitutes a very different strain-dependence of diffusivity from all previous studies focusing on conventional metal or semiconductor surfaces. Kinetic Monte Carlo simulations of Pb deposition, diffusion, and irreversible aggregation incorporating the DFT results reveal adatom and cluster distributions compatible with our experimental observations.

Chemistry↗

Domain configurations in dislocations embedded hexagonal manganite systems: From the view of graph theory

Topological defects and their interactions often arouse multiple types of emerging phenomena from edge states in Skyrmions to disclination pairs in liquid crystals. In hexagonal manganites, partial edge dislocations, a prototype topological defect, are ubiquitous and they significantly alter the topologically protected domains and their behaviors. In this work, combining electron microscopy experiment and graph theory analysis, we report a systematic study of the connections and configurations of domains in this dislocation embedded system. Rules for domain arrangement are established. The dividing line between domains, which can be attributed by the strain field of dislocations, is accurately described by a genus model from a higher dimension in the graph theory. In conclusion, our results open a door for the understanding of domain patterns in topologically protected multiferroic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Designing carbon wetting layers with inorganic salts as additives for enhanced adhesion and molten sodium wettability in electrochemical application

ß” alumina solid-state electrolyte (BASE) is considered one of the most promising materials for sodium batteries due to its high ionic conductivity and exceptional stability with molten sodium. However, at lower operating temperatures, the poor physical contact at the liquid-solid interface between molten sodium and BASE results in high interfacial resistance. In this study, we explore the optimization of carbon wetting layers with various salt additives to enhance adhesion and improve molten sodium wettability. Using a spray-coating method, carbon layers incorporating sodium hexametaphosphate (Na6(PO3)6, SHMP) as an additive demonstrate superior adhesion, mechanical stability, and enhanced wettability with molten sodium. Scanning Electron Microscopy (SEM) analysis reveals that SHMP preserves the porous carbon network required for efficient sodium transport while minimizing structural defects such as cracks and voids. Electrochemical testing using Na symmetric cells confirms that SHMP-modified layers significantly reduce interfacial resistance and overpotential, outperforming No salts counterparts. These findings highlight that the strategic incorporation of suitable additives, such as SHMP, in the design of microscale carbon layers could significantly enhance the performance of molten sodium batteries at lower operating temperatures.

Han, Henry H.↗

Microstructural and wear properties of sputtered carbides and silicides

Sputtered Cr3C2, Cr3Si2, and MoSi2 wear-resistant films (0.05 to 3.5 microns thick) were deposited on metal and glass surfaces. Electron transmission, electron diffraction, and scanning electron microscopy were used to determine the microstructural appearance. Strong adherence was obtained with these sputtered films. Internal stresses and defect crystallographic growth structures of various configurations within the film have progressively more undesirable effects for film thicknesses greater than 1.5 microns. Sliding contact and rolling element bearing tests were performed with these sputtered films. Bearings sputtered with a duplex coating (0.1-micron-thick undercoating of Cr3Si2 and subsequently 0.6-micron coating of MoS2) produced marked improvement over straight MoS2 films.

Spalvins, T.↗

Microstructural and wear properties of sputtered carbides and silicides

Sputtered Cr3C2, Cr3Si2, and MoSi2 wear-resistant films (0.05 to 3.5 microns thick) were deposited on metal and glass surfaces. Electron transmission, electron diffraction, and scanning electron microscopy were used to determine the microstructural appearance. Strong adherence was obtained with these sputtered films. Internal stresses and defect crystallographic growth structures of various configurations within the film have progressively more undesirable effects for film thicknesses greater than 1.5 microns. Sliding contact and rolling-element bearing tests were also performed with these sputtered films.

Spalvins, T.↗

Dislocation dissociation in some f.c.c. metals

The dissociation of a perfect screw dislocation into a stacking fault in an f.c.c. lattice is modeled by the modified lattice statics. The interatomic potentials are obtained from the work of Esterling and Swaroop and differ substantially from those empirical potentials usually employed in defect simulations. The calculated stacking fault widths for aluminum, copper, and silver are in good agreement with weak beam microscopy results.

Esterling, D. M.↗

Comparison of NDE techniques for sintered-SiC components

High frequency, bulk-wave ultrasonics detected defects in manufactured SiC components. In addition, gas-turbine blades and vanes were examined by scanning laser acoustic microscopy (SLAM). Comparative results obtained on simple shapes such as disks and bars by microfocus X-ray radiography, ultrasonics, scanning photoacoustic spectroscopy, and SLAM are discussed.

Srinivasan, M.↗

Optical properties of InGaN/GaN nanopillars fabricated by postgrowth chemically assisted ion beam etching

The optical properties of InGaN/GaN quantum wells, which were nanopatterned into cylindrical shapes with diameters of 2 {mu}m, 1 {mu}m, or 500 nm by chemically assisted ion beam etching, were investigated. Photoluminescence (PL) and time-resolved PL measurements suggest inhomogeneous relaxation of the lattice-mismatch induced strain in the InGaN layers. By comparing to a strain distribution simulation, we found that partial stain relaxation occurs at the free side wall, but strain remains in the middle of the pillar structures. The strain relaxation leads to an enhanced radiative recombination rate by a factor of 4-8. On the other hand, nonradiative recombination processes are not strongly affected, even by postgrowth etching. Those characteristics are clearly reflected in the doughnut-shape emission patterns observed by optical microscopy.

36 MATERIALS SCIENCE↗

Electrodeposited Biaxially Textured Buffer Layers for YBCO Superconductors

Non-vacuum electrodeposition (ED) was used to prepare simplified Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7} and CeO{sub 2}/Gd{sub 2}Zr{sub 2}O{sub 7} buffer layers on a Ni-W substrate. Post-annealing conditions of electrodeposited precursor films were optimized to obtain high-quality biaxially textured buffer layers. The buffer layers were characterized by X-ray diffraction, optical profiling, and transmission electron microscopy (TEM). The effect of the cap layer thickness on the surface morphology and texture of the buffers was also studied. The microstructure of CeO{sub 2}/Gd{sub 2}Zr{sub 2}O{sub 7} was analyzed and compared to Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7}. The high-resolution TEM shows biaxially textured crystalline elctrodeposited Gd{sub 2}O{sub 3} and CeO{sub 2} cap layers on the electrodeposited Gd{sub 2}Zr{sub 2}O{sub 7} layers without any defects. YBa{sub 2}Cu{sub 3}O{sub 7}-delta (YBCO) superconductor was deposited by pulsed laser deposition (PLD) on the simplified ED-Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7} and ED-CeO{sub 2}/Gd{sub 2}Zr{sub 2}O{sub 7} buffers. Transport current density of 3.3 MA/cm{sup 2} at 77 K was obtained for PLD YBCO deposited on ED-Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7} buffer layers.

14 SOLAR ENERGY↗

Structural Defects of Silver Hollandite, Ag x Mn 8 O y , Nanorods: Dramatic Impact on Electrochemistry

Hollandites (OMS-2) are an enticing class of sorbents, catalysts, and energy storage materials with a tunnel structure permitting one-dimensional insertion and deinsertion of ions and small molecules along the c direction. A 7-fold increase in delivered capacity for Li/Ag x Mn 8 O 16 electrochemical cells (160 versus 23 mAh/g) observed upon a seemingly small change in silver content ( x ~1.1 (L-Ag-OMS-2) and 1.6 (H-Ag-OMS-2)) led us to characterize the structure and defects of the silver hollandite material. In this work, Ag hollandite nanorods are studied through the combined use of local (atomic imaging, electron diffraction, electron energy-loss spectroscopy) and bulk (synchrotron based X-ray diffraction, thermogravimetric analysis) techniques. Selected area diffraction and high resolution transmission electron microscopy show a structure consistent with that refined by XRD; however, the Ag occupancy varies significantly even within neighboring channels. Both local and bulk measurements indicate a greater quantity of oxygen vacancies in L-Ag-OMS-2, resulting in lower average Mn valence relative to H-Ag-OMS-2. Electron energy loss spectroscopy shows a lower Mn oxidation state on the surface relative to the interior of the nanorods, where the average Mn valence is approximately Mn 3.7+ for H-Ag-OMS-2 and Mn 3.5+ for L-Ag-OMS-2 nanorods, respectively. The higher delivered capacity of L-Ag-OMS-2 may be related to more oxygen vacancies compared to H-Ag-OMS-2. Thus, the oxygen vacancies and MnO 6 octahedra distortion are assumed to open the MnO 6 octahedra walls, facilitating Li diffusion in the ab plane. These results indicate crystallite size and surface defects are significant factors affecting battery performance.

25 ENERGY STORAGE↗

Linearly aligned single-chiral vortices in hexagonal manganites by in situ electric arc heating

Nanoscale topological defects, such as vortices and skyrmions in ferroic systems, have been intensively investigated due to their intriguing properties and behaviors. In addition to harnessing and tuning their functionalities, spatial manipulation and control of topological defects as functional elements are important for future nanotechnologies. Here in this paper, we report a linear alignment behavior of single-chiral vortices observed in thin transmission electron microscopy samples of multiferroic hexagonal manganites during an in situ heating experiment. In order to avoid chemical degradation during high-temperature heating in vacuum, we have utilized a rapid heating and quenching by in situ electric arcing. Using atomic resolution electron microscopy and phase-field simulation, we found that vortices and antivortices formed near the phase transition temperature are pulled out in the opposite directions by mechanical strain to leave single-chiral vortices linearly aligned along an isothermal line formed during quenching. In conclusion, Oour study provides important insight into spatial manipulation of the topological defects in oxide multiferroics by investigating far-equilibrium dynamics of symmetry-breaking continuous phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computing virtual dark-field X-ray microscopy images of complex discrete dislocation structures from large-scale molecular dynamics simulations

Dark-field X-ray microscopy (DFXM) is a novel diffraction-based imaging technique that non-destructively maps the local deformation from crystalline defects in bulk materials. While studies have demonstrated that DFXM can spatially map 3D defect geometries, it is still challenging to interpret DFXM images of the high-dislocation-density systems relevant to macroscopic crystal plasticity. This work develops a scalable forward model to calculate virtual DFXM images for complex discrete dislocation structure(s) (DDS) obtained from atomistic simulations. Our new DDS-DFXM model integrates a non-singular formulation for calculating the local strain from the DDS and an efficient geometrical optics algorithm for computing the DFXM image from the strain field. We apply the model to complex DDS obtained from a large-scale mol­ecular dynamics simulation of compressive loading on single-crystal silicon. Simulated DFXM images exhibit prominent contrast for dislocation features between the multiple slip systems, demonstrating the potential of DFXM to resolve features from dislocation multiplication. In conclusion, the integrated DDS-DFXM model provides a toolbox for DFXM experimental design and image interpretation in the context of bulk crystal plasticity for a range of measurements across shock plasticity and the broader materials science community.

X-ray imaging↗

Imaging Hindered Rotations of Alkoxy Species on TiO2(110)

We present the first study of the rotational dynamics of organic species on any oxide surface. Specifically, variable-temperature scanning tunneling microscopy (STM) and dispersion-corrected density functional theory are used to study the alkyl chain conformational disorder and dynamics of 1-, 2-, 3- and 4-octoxy on rutile TiO2(110). Initially, the geminate pairs of the octoxy and bridging hydroxyl species are created via octanol dissociation on bridging-oxygen (Ob) vacancy defects. The STM images provide time averaged snapshots of octoxy species rotating among multiple energetically nearly-degenerate configurations accessible at a given temperature. In the calculations we find that the underlying corrugated potential energy surface is a result of the interplay between attractive Van der Waals dispersion forces leading to weak attractive C...Ti and repulsive C...Ob interactions which lead to large barriers of 50-70kJmol-1 for the rotation of the octoxy alkyl chains across the Ob rows. In the presence of the germinal hydroxyl groups we find that the relative populations of the various conformations as well as the rotational barriers are perturbed by the presence of geminate hydroxyl due to additional C...hydroxyl repulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous fatigue damage in a nickel-based single-crystal superalloy unraveled using correlative 3D X-ray technology

Nickel-based single-crystal (Ni-SX) superalloys under cyclic stress are susceptible to cracking at stress-concentration sites, eventually leading to low-cycle fatigue (LCF) failure. LCF cracks typically originate from intrinsic defects (e.g., voids and carbides) within solidified dendrites. However, systematic quantitative experimental analyses of defect-mediated local damage remain limited. To thoroughly understand the microscopic origins and evolution of LCF damage, correlated 3D mapping of dendrites across various regions is essential. Here, in this study, macroscale micro-computed tomography (μ-CT) was initially used to capture internal interdendritic secondary cracks within bulk DD413 superalloy after LCF testing at 760 °C. Subsequently, a multimodal methodology combining synchrotron 3D microdiffraction (3D-μXRD), high-resolution μ-CT, and electron microscopy was established. This approach allowed precise localization of internal damage zones near interdendritic secondary cracks and detailed mapping of the 3D correlated distributions of dendrites, defects, and residual stress/strain fields within these zones at submicron spatial resolution. Finally, the same approach was applied to specimens subjected to interrupted loading at approximately 40 % of the fatigue life to uncover the early damage states of dendrites. The dendrite cores (DCs) and interdendritic regions (IDs) exhibit microscale heterogeneous mechanical responses: nearly defect-free DCs accumulate local irreversible slip along specific slip systems to generate slip bands, while the IDs containing various defects accommodate local microplasticity through the activation of multiple slip systems around these defects. The local tensile stress near defects in the IDs exceeds that in the DC slip band regions by more than threefold, leading to the generation of local damage zones within the IDs. Chain-like defect distributions facilitate the interconnection of these local zones into a continuous damage region, further elevating the overall tensile stress in the IDs. Additionally, geometrically necessary dislocations alone are insufficient as indicators of LCF damage; both the internal stress state and its magnitude must be considered. These experimental results provide critical data and insights for the development of multi-physics fatigue models.

Localized deformation↗

Topological insulator Bi{sub 2}Se{sub 3} thin films grown on double-layer graphene by molecular beam epitaxy

Atomically flat thin films of topological insulator Bi{sub 2}Se{sub 3} have been grown on double-layer graphene formed on 6H-SiC(0001) substrate by molecular beam epitaxy. By a combined study of reflection high energy electron diffraction and scanning tunneling microscopy, we identified the Se-rich condition and temperature criterion for layer-by-layer growth of epitaxial Bi{sub 2}Se{sub 3} films. The as-grown films without doping exhibit a low defect density of 1.0{+-}0.2x10{sup 11}/cm{sup 2}, and become a bulk insulator at a thickness of ten quintuple layers, as revealed by in situ angle resolved photoemission spectroscopy measurement.

36 MATERIALS SCIENCE↗

Morphology and Luminescence Properties of Transition Metal Doped Zinc Selenide Crystals

Zinc selenide is an excellent matrix material to dope with rare-earth and transition metal to achieve mid-infrared luminescence to develop high power lasers. The luminescence, morphology and refractive index is significantly affected by the doping and defects generated due to size and valency of dopants, concentration, growth process and convection during the growth. The aim of the study is to investigate effect of point and line defects generated due to low doping of iron and chromium on the emission and morphology of the zinc selenide. Luminescence and morphological properties of large iron and chromium doped zinc selenide single crystals were studied to evaluate the effect of extremely low residual impurities and defects associated with the doping process. The emission properties following both short wavelength (i.e., ultraviolet; 350 – 370 nm) excitation and longer wavelength (i.e., near infrared; 850 – 870 nm) excitation were characterized. Luminescence emission bands were identified in both doped crystals. In addition to the primary emission bands, satellite peaks and intra-center transitions were also observed. Due to local population defects associated with the residual impurities (ppm to ppb) in the Fe-ZnSe and Cr-ZnSe crystals, peak emission wavelengths were observed to shift. Raman studies using 266 and 532 – nm excitation revealed different positions of longitudinal and transverse peaks for Fe-ZnSe and Cr-ZnSe crystals, associated with different levels of defects due to the different ion sizes. The emission bands were found to decrease in intensity due to recombination of residual impurity co-dopants and complex defects generated during growth and fabrication. Cryogenic temperature analyses revealed a very clean emission band due to freezing of some of the point and line defects. An emission band observed at 980 nm for both crystals at room temperature as well as cryogenic temperatures indicates a vibronic peak in ZnSe. The scanning electron microscopy (SEM) images of the local morphology support the conclusion that small crystallites in doped crystals are also present.

Zinc selenide↗