Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Relativistic ultrafast electron diffraction at high repetition rates

The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments are being developed that are aimed at increasing the beam brightness in order to observe structural signatures, but so far they have been limited to low average current beams. Here, we present the technical design and capabilities of the HiRES (High Repetition-rate Electron Scattering) instrument, which blends relativistic electrons and high repetition rates to achieve orders of magnitude improvement in average beam current compared to the existing state-of-the-art instruments. The setup utilizes a novel electron source to deliver femtosecond duration electron pulses at up to MHz repetition rates for UED experiments. Instrument response function of sub-500 fs is demonstrated with < 100 fs time resolution targeted in future. We provide example cases of diffraction measurements on solid-state and gas-phase samples, including both micro- and nanodiffraction (featuring 100 nm beam size) modes, which showcase the potential of the instrument for novel UED experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Grazing incidence extreme ultraviolet spectrometer fielded with time resolution in a hostile Z-pinch environment

This recently developed diagnostic was designed to allow for time-gated spectroscopic study of the EUV radiation (4 nm < {lambda} < 15 nm) present during harsh wire array z-pinch implosions. The spectrometer utilizes a 25 {mu}m slit, an array of 3 spherical blazed gratings at grazing incidence, and a microchannel plate (MCP) detector placed in an off-Rowland position. Each grating is positioned such that its diffracted radiation is cast over two of the six total independently timed frames of the MCP. The off-Rowland configuration allows for a much greater spectral density on the imaging plate but only focuses at one wavelength per grating. The focal wavelengths are chosen for their diagnostic significance. Testing was conducted at the Zebra pulsed-power generator (1 MA, 100 ns risetime) at University of Nevada, Reno on a series of wire array z-pinch loads. Within this harsh z-pinch environment, radiation yields routinely exceed 20 kJ in the EUV and soft x-ray. There are also strong mechanical shocks, high velocity debris, sudden vacuum changes during operation, energic ion beams, and hard x-ray radiation in excess of 50 keV. The spectra obtained from the precursor plasma of an Al double planar wire array contained lines of Al IX and AlX ions indicating a temperature near 60 eV during precursor formation. Detailed results will be presented showing the fielding specifications and the techniques used to extract important plasma parameters using this spectrometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural and optical characterization of InAs nanocrystals deposited by spray pyrolysis

4-5 nm size InAs nanocrystals were prepared by spray pyrolysis technique on glass substrates from alkaline solution containing InCl{sub 3} and As{sub 2}O. X-Ray diffraction and absorption spectra suggested that the deposition conditions (deposition time and temperature) had a profound influence on the structure and thickness of deposited layers. The optical absorption band edges shifted to lower energy when increasing the thickness with respect to the bulk material. The marked blue shift of the optical absorption edge indicated a strong quantum confinement effect in InAs films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Peculiarities of the correlation functions, X-ray and neutron scattering in BaTiO{sub 3}

Based on molecular-dynamics (MD) simulations, we have calculated the static and dynamic correlation functions in a BaTiO{sub 3} crystal. The static correlation functions have been used to study the peculiarities of diffuse scattering in barium titanate showing the experimentally observed anomalous planes. Based on time-dependent pair correlation functions, we have calculated the phonon spectra of BaTiO{sub 3} and studied the central peak of inelastic scattering. The phonon frequencies calculated by the MD method agree well with those obtained previously in the quasi-harmonic approximation. We show that the central peak of inelastic scattering is associated mainly with the soft optic mode and has the same symmetry. The large anisotropy in the displacements of atoms in the soft mode allows the presence of peculiarities in both X-ray scattering and EXAFS spectroscopy to be explained. The characteristic shape of the EXAFS spectra is shown to be explained by the quasi-one-dimensional motion of the oxygen ions in the cubic lattice of BaTiO{sub 3}. Our calculation of triple correlation functions shows that the titanium atom in the described model oscillates around the cubic cell center. Explaining the experimental data that have caused disagreement about the nature of the phase transition in BaTiO{sub 3} using the developed model gives grounds to treat the phase transition in barium titanate as a displacive one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of a single protein by ultrafast X-ray diffraction

The idea of using ultrashort X-ray pulses to obtain images of single proteins frozen in time has fascinated and inspired many. It was one of the arguments for building X-ray free-electron lasers. According to theory, the extremely intense pulses provide sufficient signal to dispense with using crystals as an amplifier, and the ultrashort pulse duration permits capturing the diffraction data before the sample inevitably explodes. This was first demonstrated on biological samples a decade ago on the giant mimivirus. Since then, a large collaboration has been pushing the limit of the smallest sample that can be imaged. The ability to capture snapshots on the timescale of atomic vibrations, while keeping the sample at room temperature, may allow probing the entire conformational phase space of macromolecules. Here we show the first observation of an X-ray diffraction pattern from a single protein, that of Escherichia coli GroEL which at 14 nm in diameter is the smallest biological sample ever imaged by X-rays, and demonstrate that the concept of diffraction before destruction extends to single proteins. From the pattern, it is possible to determine the approximate orientation of the protein. Our experiment demonstrates the feasibility of ultrafast imaging of single proteins, opening the way to single-molecule time-resolved studies on the femtosecond timescale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vapor-Phase Intercalation of Cesium into Black Phosphorous

Cesium vapors were charged into black phosphorous (BP) flakes at varied times and at a temperature gradient of 150 °C. The X-ray diffraction (XRD) measurements of these samples suggest a reduction in the strength of van der Waal interactions between BP layers leading to the loss of coherence of out-of-plane peaks. At the same time, the three main Raman modes of BP (A g 1 , B 2 g , and A g 2 ) steadily redshifted as exposure times were increased, with modes B 2 g and A g 2 shifting faster than A g 1 . After initial rapid downshifts of active BP phonon modes, this intercalation strategy showed its limits following prolonged exposure times. Saturation of BP flakes by Cs vapors ensued and the kinetics was fitted with an exponential decay function. Furthermore, the thermoelectric power (TEP) of cesiated BP exhibited an inversion in sign from positive to negative around 400 K, lending credence to the transformation of as-prepared BP which is a p-type semiconductor to an n-type equivalent due to Cs atom intercalation driven shifting of the Fermi level toward the conduction band of BP and the donation of electrons from Cs. Furthermore, density functional theory (DFT) calculations were used to delve deeper into understanding Cs intercalation on the structural evolution of BP.

36 MATERIALS SCIENCE↗

Simultaneous X-ray diffraction and phase-contrast imaging for investigating material deformation mechanisms during high-rate loading

Using a high-speed camera and an intensified charge-coupled device (ICCD), a simultaneous X-ray imaging and diffraction technique has been developed for studying dynamic material behaviors during high-rate tensile loading. A Kolsky tension bar has been used to pull samples at 1000 s -1 and 5000 s -1 strain-rates for super-elastic equiatomic NiTi and 1100-O series aluminium, respectively. By altering the ICCD gating time, temporal resolutions of 100 ps and 3.37 µs have been achieved in capturing the diffraction patterns of interest, thus equating to single-pulse and 22-pulse X-ray exposure. Furthermore, the sample through-thickness deformation process has been simultaneously imaged via phase-contrast imaging. It is also shown that adequate signal-to-noise ratios are achieved for the detected white-beam diffraction patterns, thereby allowing sufficient information to perform quantitative data analysis diffraction via in-house software ( WBXRD_GUI ). Of current interest is the ability to evaluate crystal d -spacing, texture evolution and material phase transitions, all of which will be established from experiments performed at the aforementioned elevated strain-rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Characterization of Electrodeposited Technetium on Gold Foil

The reduction and electrodeposition of TcO{sub 4}{sup -} on a smooth gold foil electrode with an exposed area of 0.25 cm{sup 2} was performed in 1 M H{sub 2}SO{sub 4} supporting electrolyte using bulk electrolysis with a constant current density of 1.0 A/cm{sup 2} at a potential of -2.0 V. Significant hydrogen evolution accompanied the formation of Tc deposits. Tc concentrations consisted of 0.01 M and 2 x 10{sup -3} M and were electrodeposited over various times. Deposited fractions of Tc were characterized by powder x-ray diffraction, x-ray absorption fine structure spectroscopy, and scanning electron microscopy with the capability to measure semiquantitative elemental compositions by energy-dispersive x-ray emission spectroscopy. Results indicate the presence of Tc metal on all samples as the primary electrodeposited constituent for all deposition times and Tc concentrations. Thin films of Tc have been observed followed by the formation of beads that are removable by scratching. After 2000, the quantity of Tc removed from solution and deposited was 0.64 mg Tc per cm{sup 2}. The solution, after electrodeposition, showed characteristic absorbances near 500 nm corresponding to hydrolyzed Tc(IV) produced during deposition of Tc metal. No detectable Tc(IV) was deposited to the cathode.

08 HYDROGEN↗

Room-temperature ferromagneticlike behavior in Mn-implanted and postannealed InAs layers deposited by molecular beam epitaxy

We report on the magnetic and structural properties of Ar- and Mn-implanted InAs epitaxial films grown on GaAs (100) by molecular beam epitaxy and the effect of rapid thermal annealing (RTA) for 30 s at 750 deg. C. Channeling particle induced x-ray emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are substitutional in the In site of the InAs lattice, like in a diluted magnetic semiconductor. All of these samples show diamagnetic behavior. However, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments was performed with Ar as implantation ion, all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagneticlike behavior in the Mn-InAs-RTA layer is not related to lattice disorder produced during implantation but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns and Rutherford backscattering measurements evidence the segregation of an oxygen-deficient MnO{sub 2} phase (nominally MnO{sub 1.94}) in the Mn-InAs-RTA epitaxial layers which might be the origin of the room-temperature ferromagneticlike response observed.

36 MATERIALS SCIENCE↗

Microwave synthesis and electrochemical characterization of mesoporous carbon@Bi{sub 2}O{sub 3} composites

Graphical abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance is up to 386 F g{sup -1}. Research highlights: {yields} An efficient and quick microwave method has been employed. {yields} A worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites have been successfully prepared. {yields} This composite exhibits excellent capacitance performance. {yields} This composite could be a potential electrode material for the supercapacitors. -- Abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. As-prepared products have been characterized by X-ray diffraction, N{sub 2} adsorption-desorption, scanning electron microscopy, transmission electron microscopy and inductive coupled plasma atomic emission spectroscopy. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance reaches 386 F g{sup -1}, three times more than the pure worm-like mesoporous carbon.

36 MATERIALS SCIENCE↗

Large-scale and shape-controlled synthesis and characterization of nanorod-like nickel powders under microwave radiation

Graphical abstract: The nanorod-like pure nickel were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The materials were characterized by XRD, SEM, EDS, HRTEM, and selected-area electron diffraction, etc. The lattice expansion for Ni powders was explained in detail. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of Ni nanorod-like (fcc) were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Highlights: Black-Right-Pointing-Pointer The synthesis of nanorod-like nickel under microwave irradiation. Black-Right-Pointing-Pointer Nitrogen generated in reaction as a shielding gas. Black-Right-Pointing-Pointer The lattice expansion for Ni powders was explained in detail. Black-Right-Pointing-Pointer Magnetic properties of Ni were quite different from those of Ni nanoparticles. -- Abstract: The nanorod-like nickel powders were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The morphology and structure of as-prepared products could be easily tuned by adjusting process parameters such as pH value and microwave irradiation time. The resulting materials were characterized by X-ray diffraction (XRD), scanning electron microscope, transmission electron microscopy and selected-area electron diffraction (SAED). The results demonstrated that pure nickel powders with face-centered cubic (fcc) structure were prepared at relatively mild condition and no characteristic peaks of nickel oxide in the XRD pattern were found. The phenomenon of lattice expansion for Ni powders was explained in details according to the XRD theory. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of nanorod-like (fcc) Ni powders were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Furthermore, it had more strong ferromagnetic properties than that of Ni powders both bulk and nanoparticles.

36 MATERIALS SCIENCE↗

Synthesizing pseudo-Kossel lines from neutron transmission data. II. Validation with neutron diffraction data

A new method to recover the orientation matrix of a single crystal with a known unit cell by analyzing synthesized pseudo-Kossel lines from time-of-flight neutron transmission data has been outlined in a companion article [Dessieux et al. (2023). J. Appl. Cryst. 56, https://dx.doi.org/10.1107/S1600576723001346; referred to here as Article I]. In this work, validation of this new technique is presented by employing experimental neutron transmission and diffraction measurements performed on two copper single-crystal specimens. Time-of-flight spectra were recorded during rotation (ω) of the single crystals about a vertical axis perpendicular to the incident neutron beam. The λ–ω maps recorded in transmission are utilized to determine the crystal orientation with respect to the neutron beam, following the procedure presented in Article I. Further, to validate the indexing procedure, the crystal orientations are compared with those obtained via conventional methods using the diffraction data. The resulting pseudo-Kossel lines across the 2D detectors are also observed for the first time.

36 MATERIALS SCIENCE↗

Structure and Dynamics for LiBH4-LiCl Solid Solutions

A surprisingly high degree of structural and compositional dynamics is observed in the system LiBH{sub 4}-LiCl as a function of temperature and time. Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data reveals that Cl{sup -} readily substitutes for BH{sub 4}{sup -} in the structure of LiBH{sub 4}. Prolonged heating a sample of LiBH{sub 4}-LiCl (1:1 molar ratio) above the phase transition temperature and below the melting point (108 < T < 275 C) can produce highly chloride substituted hexagonal lithium borohydride, h-Li(BH{sub 4}){sub 1-x}Cl{sub x}, e.g., x {approx} 0.42, after heating from room temperature (RT) to 224 C at 2.5 C/min. LiCl has a higher solubility in h-LiBH{sub 4} as compared to orthorhombic lithium borohydride, o-LiBH{sub 4}, which is illustrated by a LiBH{sub 4}-LiCl (1:1) sample equilibrated at 245 C for 24 days and left at RT for another 13 months. Rietveld refinement reveals that this sample contains o-Li(BH{sub 4}){sub 0.91}Cl{sub 0.09} and LiCl. This illustrates a significantly faster dissolution of LiCl in h-LiBH{sub 4} as compared to a slower segregation of LiCl from o-LiBH{sub 4}, which is also demonstrated by in situ SR-PXD from three cycles of heating and cooling of the same Li(BH{sub 4}){sub 0.91}Cl{sub 0.09} sample. The substitution of the smaller Cl{sup -} for the larger BH{sub 4}{sup -} ion is clearly observed as a reduction in the unit cell volume as a function of time and temperature. A significant stabilization of h-LiBH{sub 4} is found to depend on the degree of anion substitution. Variable temperature solid-state magic-angle spinning (MAS) {sup 7}Li and {sup 11}B NMR experiments on pure LiBH{sub 4} show an increase in full width at half maximum (fwhm) when approaching the phase transition from o- to h-LiBH{sub 4}, which indicates an increase of the relaxation rate (i.e., T{sub 2} decreases). A less pronounced effect is observed for ion-substituted Li(BH{sub 4}){sub 1-x}Cl{sub x}, 0.09 < x < 0.42. The MAS NMR experiments also demonstrate a higher degree of motion in the hexagonal phase, i.e., fwhm is reduced by more than a factor of 10 at the o- to h-LiBH{sub 4} phase transition.

36 MATERIALS SCIENCE↗

True molecular conformation and structure determination by three-dimensional electron diffraction of PAH by-products potentially useful for electronic applications

The true mol­ecular conformation and the crystal structure of benzo[e]di­naphtho­[2,3-a;1',2',3',4'-ghi]fluoranthene, 7,14-di­phenyl­naphtho­[1,2,3,4-cde]bis­anthene and 7,16-di­phenyl­naphtho­[1,2,3,4-cde]heli­anthrene were determined ab initio by 3D electron diffraction. All three mol­ecules are remarkable polycyclic aromatic hydro­carbons. The mol­ecular conformation of two of these com­pounds could not be determined via classical spectroscopic methods due to the large size of the mol­ecule and the occurrence of multiple and reciprocally connected aromatic rings. The mol­ecular structure of the third mol­ecule was previously considered provisional. These com­pounds were isolated as by-products in the synthesis of similar products and were at the same time nanocrystalline and available only in very limited amounts. 3D electron diffraction data, taken from submicrometric single crystals, allowed for direct ab initio structure solution and the unbiased determination of the inter­nal mol­ecular conformation. Detailed synthetic routes and spectroscopic analyses are also discussed. Based on many-body perturbation theory simulations, benzo[e]di­naphtho­[2,3-a;1',2',3',4'-ghi]fluoranthene may be a promising candidate for triplet–triplet annihilation and 7,14-di­phenyl­naphtho­[1,2,3,4-cde]bis­anthene may be a promising candidate for inter­molecular singlet fission in the solid state.

36 MATERIALS SCIENCE↗

Synchrotron X-ray diffraction of pyrolusite (MnO 2 ) and rutile (TiO 2 ) during heating to ~1000 °C

To compare thermal expansion behaviors in isomorphic structures with different redox behaviors, we separately heated pyrolusite (Mn 4+ O 2 ) and rutile (Ti 4+ O 2 ) powders from 25 to ~1000 °C at a rate of 0.05 °C/s at ambient pressure and analyzed them using synchrotron X-ray diffraction and Rietveld refinement. The pyrolusite exhibited two reduction-induced phase decompositions. Between 531 and 583 °C, pyrolusite decomposed to bixbyite (Mn 3+ 2 O 3 ), and between 972 and 998 °C, bixbyite decomposed to hausmannite (Mn 2+ Mn 3+ 2 O 4 ). The rutile experienced no phase decompositions or transitions over this same temperature interval. The refined bond lengths and angles for pyrolusite showed that the Mn 4+ coordination octahedron became more distorted near the phase decomposition to bixbyite due to the approach of two coordinating oxygen atoms. The 3d electrons of each Mn 4+ ion in pyrolusite make π bonds with the 2p electrons of the surrounding O 2- ions, whereas the Ti 4+ of rutile has no 3d electrons. Thus, π bonding between octahedral Mn 4+ and the surrounding O 2- anions increases the strength of the Mn–O bonds of pyrolusite relative to the Ti–O bonds of rutile. However, we observed a small decrease in O–O distances in pyrolusite before the decomposition, suggesting that at high temperature, increased π bonding between adjacent O anions precedes the release of O 2 and the reduction of Mn 4+ to Mn 3+ . Analogous behavior was observed for bixbyite before its reductive phase decomposition to hausmannite. In contrast, no anomalous changes in the O–O distances occurred for rutile. Our X-ray diffraction analyses provided accurate thermal expansion coefficients for these materials over a broader temperature range than reported in previous studies. The Mn–O bond lengths in pyrolusite were shorter and stronger than the Ti–O bonds of rutile; for example, at 60 °C, bond distances in pyrolusite refined to 1.8854(6) Å whereas the bond lengths of rutile were 1.9575(4) Å. Accordingly, the axial and volumetric thermal expansion coefficients refined for rutile were greater than those for pyrolusite. Further, the axial coefficients of thermal expansion (CTE) for pyrolusite were 96% (a-axis) and 69% (c-axis) of the corresponding values for rutile, and the volumetric CTE for pyrolusite was 85% of that for rutile.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational approaches to model X-ray photon correlation spectroscopy from molecular dynamics

X-ray photon correlation spectroscopy (XPCS) allows for the resolution of dynamic processes within a material across a wide range of length and time scales. X-ray speckle visibility spectroscopy (XSVS) is a related method that uses a single diffraction pattern to probe ultrafast dynamics. Interpretation of the XPCS and XSVS data in terms of underlying physical processes is necessary to establish the connection between the macroscopic responses and the microstructural dynamics. To aid the interpretation of the XPCS and XSVS data, we present a computational framework to model these experiments by computing the X-ray scattering intensity directly from the atomic positions obtained from molecular dynamics simulations. We compare the efficiency and accuracy of two alternative computational methods: the direct method computing the intensity at each diffraction vector separately, and a method based on fast Fourier transform that computes the intensities at all diffraction vectors at once. Furthermore, the computed X-ray speckle patterns capture the density fluctuations over a range of length and time scales and are shown to reproduce the known properties and relations of experimental XPCS and XSVS for liquids.

36 MATERIALS SCIENCE↗

Design and optimization of stepped austempered ductile iron using characterization techniques

Conventional characterization techniques such as dilatometry, X-ray diffraction and metallography were used to select and optimize temperatures and times for conventional and stepped austempering. Austenitization and conventional austempering time was selected when the dilatometry graphs showed a constant expansion value. A special heat color-etching technique was applied to distinguish between the untransformed austenite and high carbon stabilized austenite which had formed during the treatments. Finally, it was found that carbide precipitation was absent during the stepped austempering in contrast to conventional austempering, on which carbide evidence was found. - Highlights: • Dilatometry helped to establish austenitization and austempering parameters. • Untransformed austenite was present even for longer processing times. • Ausferrite formed during stepped austempering caused important reinforcement effect. • Carbide precipitation was absent during stepped treatment.

36 MATERIALS SCIENCE↗

Interplay of strain and phase evolution of laser powder bed fusion Ti–6Al–4V

While additive manufacturing (AM) provides a method of producing geometrically complex and highly detailed structures, the generation of residual strain in AM processes like laser powder bed fusion (L-PBF) can negatively impact performance-enabling properties. In applications such as orthopedic implants, specific performance windows require optimized microstructures in order to obtain desirable properties from multi-phase alloys like Ti–6Al–4V. This research aims to quantify the microscale origins of strain in L-PBF manufactured Ti–6Al–4V by understanding how strain is distributed at the grain and sub-grain scale, the interplay between phase evolution and strain, and examining post-processing strain relief strategies to control these features. Model spinal cage implants were manufactured from Ti–6Al–4V powder via L-PBF and then subjected to strain relieving heat treatment cycles above and below the Ti–6Al–4V β transus as a function of time and cooling rate. Residual strain was then studied via high resolution electron backscatter diffraction (HR-EBSD), and 2D strain maps with sub-micron resolution were generated for each post-processing state. It was found that macroscale thermal strains decreased with heat treatment time, but additional contributions from phase stabilizing residual strains retained primarily in the α' grains as lattice distortive strain remained. Additionally, the retention of β phase significantly changed the strain and dislocation distribution while reducing overall residual strain. In conclusion, these results were validated and reinforced with 3D mesoscopic micromechanical modeling of strain behavior across simulated microstructures, confirming that the local lattice dilation of α’ martensite is a primary contributor of microscale strain generation and retention in L-PBF Ti–6Al–4V.

36 MATERIALS SCIENCE↗