Search NASA⌕ Search

SEARCH · Search NASA

Results for “FASTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

A nodal transport method for coupled fast-thermal reactor analysis

We report that for efficient core analyses of coupled fast-thermal reactors, a new deterministic method has been developed based on the variational nodal transport method of VARIANT. A new multigroup cross section generation procedure was devised by combining Monte Carlo lattice calculations for thermal assemblies and the two-step procedure of the MC 2 -3 code for fast assemblies. To reduce assembly homogenization errors in nodal transport calculations, a new nodal equivalence method was developed based on the partial current discontinuity factor (PCDF) and incorporated in VARIANT. A practical procedure to calculate PCDFs with fixed source supercell calculations was also devised. The performance of the proposed method was investigated using a test problem derived from the versatile coupled test reactor (VCTR) design. The new procedure produced multigroup cross sections accurately for all assemblies. VARIANT transport calculations with PCDFs produced accurate multiplication factor and power distribution compared to reference Serpent-2 Monte Carlo solutions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Co-processing catalytic fast pyrolysis oil in an FCC reactor

Here, studies of co-processing catalytic fast pyrolysis (CFP) oil with vacuum gas oil (VGO) are conducted in a Davison Circulating Riser (DCR). The CFP oil (CFPO) for this study was produced by upgrading fast-pyrolysis vapors from pine in an ex-situ fixed-bed reactor. CFPOs were co-processed at up to a volume fraction of 0.05 with VGO at 521 degrees C and 257 kPa. The yields of oil, aqueous phase, tail gas, and coke were measured. The amount of coke was determined from the carbon containing components in the regenerator flue gas. A compositional analysis was conducted with gas chromatography and elemental analyzers. The organic liquids were distilled into gasoline, jet-fuel, diesel, and resid fractions. A biocarbon analysis was conducted on the organic phase and its individual boiling-point fractions. The results show a small decrease in liquid yield and a generally increased gas yield when co-processing CFPO with VGO. The experiments showed that 75%-100% of biocarbon is incorporated into liquid fuels relative to fossil carbon, depending on catalyst and CFPO. The measurements indicate that cracked CFPO components are predominantly included in the jet-fuel and diesel fractions. A techno-economic analysis (TEA) estimated the minimum fuel selling price (MSFP) for fuel-range products derived from FCC co-processing of CFPO at 24 to 29 $\$$/GJ ($\$$2.90 to $\$$3.50 per gasoline-gallon equivalent; GGE) at a yield of 4.87-7.14 GJ/t(biomass) or 40-58 GGE/t.

09 BIOMASS FUELS↗

Bilayer hybrid graphite anodes via freeze tape casting for extreme fast charging applications

Extreme fast charging (XFC) of lithium-ion batteries is critical for continuous market adoption of electric vehicles. However, mass transport limitations and sluggish kinetics lead to lithium plating in graphite anodes under fast charging conditions. One approach to address the mass transport limitation in graphite is to design low-tortuosity electrodes to enhance ionic transport. In this study, a bilayer hybrid structured electrode with directionally aligned channels was developed via freeze tape casting, which enables faster lithium ion diffusion through the graphite electrode. A scalable roll-to-roll process was designed in which slurry can be cast on any substrates for simple processing. Additionally, electrochemical impedance spectroscopy measurements indicated that the bilayer hybrid coating had both low tortuosity and short diffusion pathways, enabling XFC charging. Rate testing for the bilayer hybrid electrode indicated superior performance over the other coatings, exhibiting a ~20% improvement in the charge capacity compared with the conventional coating at 5C and 10 min total charging time. The bilayer hybrid electrode also demonstrated a 10% improvement in capacity retention compared with the conventional electrode after 1000 cycles at XFC conditions. This study demonstrates freeze tape casting as a scalable way to fabricate low-tortuosity electrodes for XFC applications.

25 ENERGY STORAGE↗

Towards fast-charging high-energy lithium-ion batteries: From nano- to micro-structuring perspectives

Electric vehicles (EVs) have been playing an indispensable role in reducing greenhouse gas emissions for our modern society. However, current EVs are difficult to meet people’s diverse travel needs, especially in long endurance and fast-charging capacities. At the heart of this issue is the physicochemical limit of current lithium-ion batteries (LIBs), which are the core parts for powering the vehicles. Hence, LIBs with simultaneous high energy and power are critically required to further promote the development of EVs. Here, in this review, we first summarize the key electrochemical processes in electrochemical reactions which lead to the corresponding overpotentials in or between multiple battery components. Furthermore, numerical simulations are employed to quantitatively analyze the effects of versatile electrode parameters on electrochemical properties in high-energy NMC811//graphite systems. On the basis of the in-depth understandings from simulation, recent experimental efforts on designing electroactive materials and electrode architectures across multiple length scales are discussed. Among them, nano-structuring can promote local mass transport and stabilize the interfaces at the particle level, while micro-structuring can establish efficient pathways for charge carriers at the electrode level. Finally, we conclude that a tight feedback loop among structure engineering, characterization and simulation should be followed to speed up the understanding of the deficiencies existing in current electrode designs as well as point out the possible electrode optimization routes for next-generation fast-charging LIBs.

25 ENERGY STORAGE↗

HALO: A full-orbit model of nonlinear interaction of fast particles with eigenmodes

HALO (HAgis LOcust) solves the initial value Vlasov-Maxwell problem perturbatively for application to certain nonlinear wave-particle problems in tokamak plasmas. It uses the same basic approach as the HAGIS code for wave evolution but is built on the LOCUST-GPU full-orbit code for the solution of the Hamiltonian fast particle motion in cylindrical coordinates. The wave amplitude and particle evolution include all finite Larmour radius effects. We describe and benchmark the currently implemented Alfvén eigenmode workflow, demonstrating correct particle motion, linear and nonlinear power transfer. Here, the formulation and numerical scheme are sufficiently general as to allow easy future implementation of different kinds of eigenmodes, such as modes close to the ion-cyclotron frequency. The code can model multiple eigenmodes and multiple fast ion species simultaneously, and supports the general form of the equilibrium distribution in constants of motion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enabling fast-charging of lithium-ion batteries through printed electrodes

It has been well recognized that introducing secondary porous networks (SPNs) into the electrodes can effectively improve the electrochemical performance of lithium-ion batteries (LIBs), especially under fast-charging operations. However, the process complexity and high cost limit the commercial success of advanced electrodes with SPNs. To address this issue, we developed a facile screen-printing process to produce structured graphite electrodes with SPNs. The experimental results demonstrated that, by tuning the diameter and center-to-center (C2C) distance of emulsion dots on the stencil screen, the pore diameters and C2C pore distances of SPNs in screenprinted electrodes can be precisely controlled in the range of 100 mu m to 1 mm and 100 mu m to 3 mm respectively. In addition, the SPNs with hexagonal and square-shape pore alignments have also been imprinted onto the electrode coatings through adjusting the patterns of screen stencils. Used as anodes, the printed graphite electrodes demonstrated significantly reduced overpotential and voltage fluctuation under fast-charging operations from 2C to 6C. Coupled with LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathodes, the full cells with printed graphite anodes exhibited an unprecedently stable performance with almost no capacity decay up to 170 cycles when charged to 80 % SOC at 2C. Observations from electron microscopy showed plated lithium undetectable at the surface of printed graphite electrodes after numerous cycles. The electrochemical analysis on the voltage evolution during the cell rest period indicated the significantly delayed onset of lithium plating in the presence of printed graphite electrodes. In conclusion, all these results suggest that the significantly improved cell performance is associated with the shortened Li-ion diffusion distance, reduced polarization and suppressed Li plating in the printed electrodes with patterned SPNs.

25 ENERGY STORAGE↗

An open source fast fluid dynamics model for data center thermal management

Although computational fluid dynamics (CFD) has been widely adopted to improve data center thermal management, the high computational demand limits its applications, such as multivariate optimal design and operation. Fast fluid dynamics (FFD), which has been applied for fast airflow simulation, shows great potential. However, few research applied FFD for optimal design and operation of data center thermal management. This research improves the FFD model for data centers and conducts a comprehensive evaluation and demonstration. First, the FFD model is improved by solving the advection and diffusion equations together using an upwind scheme instead of a semi-Lagrangian advection solver in the conventional FFD model. Second, new features for data centers are added, such as a pressure correction method to simulate plenum airflow and dynamic boundary conditions for IT racks. The new FFD model is first validated with two indoor environment cases and the results show that the new FFD model has slightly better overall prediction accuracy and faster speed compared to the conventional FFD model. It is also observed that both FFD models achieve acceptable accuracy, except for a few localized disparities with experimental data, which might be due to simplified handling of turbulence viscosity near the boundaries. Furthermore, validation with a real data center shows that the FFD model achieves a similar level of accuracy as CFD when compared to the experimental measurements with some level of uncertainties. It is then demonstrated for data center optimal design and operation, which saves 53.4–58.8% of annual energy while still meeting the thermal requirements. In conclusion, with a much faster speed and comparable accuracy compared to CFD, the FFD model parallelized on a graphics processing unit is promising for practical model-based data center early design and operation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Consumer behavioral adaption in EV fast charging through pricing

Despite the recent development surrounding fast electric vehicle charging and ever growing interest in research, little is known as to how people in reality use Direct Current Fast Charger (DCFC) or how different pricing may affect their recharging behavior. Understanding the consumer behavior in DCFC usage is critical in successful deployment of DCFC. This paper analyzes real-world field data to examine DCFC usage in the U.S. In particular, it examines the effect of a flat-rate fee on the changes in the rate of charge. Furthermore, the result from regression analysis shows evidence that a flat-rate fee has a negative effect on efficient DCFC stations usage.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Extended cycle life implications of fast charging for lithium-ion battery cathode

Enabling extreme fast charging (XFC, =10–15 min charging) requires a comprehensive understanding of its implications. While lithium plating is a key bottleneck for the anode, the full extent of limitations for the cathode are not well-understood, particularly in extended-cycle settings with well-defined battery designs and conditions. This article presents cycle-life implications of XFC on cathodes at multiple length scales, combining electrochemical analyses, degradation modeling, and post-test characterizations. The comprehensive test matrix includes 41 well-defined gr/NMC pouch cells under varied fast-charge rates (1–9C) and state-of-charges cycled up to 1000 times. Cathode issues remain minimal in early cycling, but begin to accelerate in later life, when distinct cracking is found and identified as a fatigue mechanism. The bulk structure of cathodes remains intact, but distinct particle surface reconstruction is observed; however, this shows less pronounced effect on cathode aging than does cracking.

25 ENERGY STORAGE↗

Levelized cost of charging of extreme fast charging with stationary LMO/LTO batteries

Extreme DC fast charging for electric vehicles (EVs) could be competitive with the internal combustion engine refueling experience and enable longer-distance travel, which could help with EV adoption and decarbonization, but these systems have high capital costs and extremely variable high-power demands. Behind-the-meter systems (BTMS) could support extreme-fast-charging (XFC) stations to increase nationwide adoption of EVs. Here, this study examines the optimal break-even levelized cost of charging (LCOC) across 96 BTMS scenarios to enable low-wait XFC stations providing 200 miles of charge in 10 min. This research simulates LCOC via synthetic XFC-capable EV loads, machine-learned battery life models from testing data, and nonlinear optimal controls, co-minimizing complex utility costs and battery replacements. An aggregate optimal BTMS design treating each EV load as equal likely gives an optimal LCOC per utility rate, the average of which is $\$$0.59/kWh. In addition, the sensitivity of optimal and off-optimal design factors, the long-life LMO/LTO chemistry, and optimized controls are analyzed. The battery control model, based on battery stressors to compare chemistries, optimizes LMO/LTO resting state of charge and cycle depth without compromising cost reduction, which enables greater flexibility in operation. The LCOC savings due to replacement reduction are small, up to $\$$0.035/kWh (6%), with an average of $\$$0.02/kWh (3.5%). Compared with gasoline stations, the aggregate XFC station design achieves comparable speed, experience of service, and cost at $\$$3.81/gal gasoline, showing that EVs can replace gasoline vehicles even for longer-distance travel.

25 ENERGY STORAGE↗

Theoretical background for a fast flow liquid metal divertor experiment

Tokamak Energy has developed a liquid metal experiment featuring a lithium loop that circulates lithium through the HIDRA stellarator at the University of Illinois at Urbana-Champaign. The loop includes a replaceable divertor module, designed to demonstrate fast, steady, open-surface liquid metal flow. The first-generation divertor module was deliberately kept simple—an open-surface chute—to enable modelling validation and establish a benchmark for future design iterations. This paper presents the theoretical foundations of the experimental design. Specifically, we identify module overflooding as the primary challenge and determine the limits of fluid velocity and magnetic field strength necessary to prevent it. The steady-state flow patterns are expected to exhibit relatively slow surface velocities, which do not fully align with the fast-flow concept. Nevertheless, the experiment is designed to achieve controllable, continuous open-surface flow within an operational fusion device, representing a significant step toward the development of liquid metal divertor technology.

Experiment↗

A generalizable machine learning-assisted fast Fourier transform algorithm to simulate the large strain phenomena in polycrystalline materials

Machine learning methods have shown initial promise in constitutive modeling for single crystals or homogenized polycrystals, delivering notable computational efficiency. However, existing machine learning-based constitutive models often lack generalizability, limiting their application across diverse boundary value problems. This study introduces a thermodynamics-informed artificial neural network model to accelerate rate-tangent crystal plasticity fast Fourier transform simulations for cross-scale deformation behaviors of polycrystals under complex loading. Our model integrates microstructural variability and local interactions effectively. To address local effects in each grain, we employ K-means clustering to group Gauss points within the microstructure into clusters assumed to be in similar mechanical states. This approach, based on self-clustering analysis, extends model scope from macroscopic stress response to the granular level, capturing mechanical responses and orientation evolution across grains. This reduces the number of nonlinear problems to solve, with cluster responses propagated throughout each group. The thermodynamics-based artificial neural network-extracted features are further processed using local material state clusters to account for history-dependent deformation and evolving microstructures. Additionally, representative volume element simulations with rate-tangent crystal plasticity fast Fourier transform provide reliable datasets for model training. The proposed model demonstrates high efficiency, accuracy, self-consistency, and enhanced generalizability in predicting strain–stress responses and orientation evolution at both individual grain and aggregate scales under complex loading conditions, such as biaxial tension and arbitrary loading scenarios.

36 MATERIALS SCIENCE↗

Modern nanostructured ferritic alloys: A compelling and viable choice for sodium fast reactor fuel cladding applications

Sodium fast reactor cores present a truly challenging environment for the fuel cladding and core structural materials that limit achievable fuel burnup in these systems. Modern nanostructured ferritic alloys have the potential to deliver the desired high performance characteristics where historic austenitic and ferritic/martensitic alloys fall short. Herein, a new nanostructured ferritic alloy, OFRAC ( O ak Ridge F ast R eactor A dvanced Fuel C ladding), is developed and demonstrated in cladding geometry with a length > 1 m. The alloy composition and microstructure are tailored to deliver dramatically improved strength and creep resistance. At 600 °C the ultimate tensile strength is ~600 MPa and the stress to induce a steady state strain rate of 10 -6 s -1 is 500 MPa vs. 200 MPa for traditional ferritic/martensitic alloys. A very high defect sink density was engineered in these alloys that is expected to further enhance the traditional good swelling and irradiation creep resistance of ferritic/martensitic steels. These significant improvements along with the demonstrated viability for seamless cladding production indicate that this alloy is a compelling and viable choice for sodium fast reactor fuel cladding applications.

36 MATERIALS SCIENCE↗

Interface chemistry informs about cathode and anode degradation during fast charging

Here, the aim of this study is to examine the development and makeup of the Solid Electrolyte Interphase (SEI) and Cathode Electrolyte Interphase (CEI) in lithium-ion batteries during rapid charging. Using X-ray photoelectron spectroscopy (XPS) and depth profiling, we investigate the chemical modifications occurring on the electrode surfaces during the initial formation and subsequent fast charge-discharge cycles. Our research shows that the anode's SEI initially comprises a thin layer rich in ketones, which then transforms into a thicker layer dominated by carbonaceous compounds during rapid charging cycles. Following assembly, lithium fluoride (LiF) quickly becomes a key element of the SEI, and its presence continues to grow substantially during the formation cycle, remaining the primary component throughout subsequent cycles. Initially, the cathode forms a thin oxide layer rich in ketones, with no noticeable carbonaceous CEI. The CEI primarily comprises LiF, which experiences an increase during the formation cycle and retains a thin layer of carbon coating after the initial rapid discharge. These findings show how the interphase layers impact the performance and stability of lithium-ion batteries, especially during fast charging for electric vertical take-off and landing (eVTOL) vehicles.

Fast charging↗

Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries

Morphological defects contribute to chronic and acute failures of batteries. The development of these morphological defects entails the multiscale chemo-mechanical coupling associated with internal mechanical stress. The mechanical stress, caused by anisotropic structural, chemical and state of charge (SOC) heterogeneities, is released through crack formation, undermining the continuous diffusion pathways of electrons and ions and creating fresh surfaces for electrode–electrolyte side reactions. The understanding of chemomechanical interplay has remained at the descriptive level, thus, the quantification or model to fingerprint these processes is highly desired. Herein, we systematically investigate the mesoscale morphological defects within LiNi 0.6 Mn 0.2 Co 0.2 O 2 secondary particles that have gone through fast-charging conditions. With the advanced synchrotron X-ray tomography, we nondestructively pierce the internal volume of secondary particles and quantify the morphological outcomes of the crack formation, such as porosity and internal surface area. We then develop a numerical model to predict the crack-induced diffusion deterrent of electrons and lithium ions. The mismatch between the local ionic and electronic conductivity can lead to highly heterogeneous SOC distribution in secondary particles, which exponentially deteriorates as the current density increases. In conclusion, our incisive investigation of chemomechanical interplay and fast-charging can inform a knowledge base to accelerate the discovery of advanced materials that are resilient against chemomechanical failures.

25 ENERGY STORAGE↗

Ultra-fast and sensitive magneto-optical hydrogen sensors using a magnetic nano-cap array

Magnetism in curved nano-geometries has opened a new path to design novel characteristics and phenomena that could greatly impact the future fundamental and applied studies of materials. Here, in this report, a hexagonally-packed array of magnetic nano-caps (or nano-patches, NP) exhibiting unique magnetic anisotropy and optimal nanostructure for fast hydrogen kinetics is explored as a sensing element for the spark-free magnetic-circular-dichroism (MCD) H 2 sensor. The MCD H 2 sensor outperforms the state-of-the-art optical sensors reported to date and satisfies the most challenging performance targets imposed by US Department of Energy. In particular, a Pd 67 Co 33 NP sensor exhibits response time of t 90 < 0.9 s, recovery time of t 10 < 9.0 s over the 1-100 mbar H 2 partial pressure range, and limit of detection (LOD) of ~1 ppm. The LOD improves to <700 ppb, when the signal-to-noise ratio is enhanced by stacking three NP arrays. Using a 30-nm TAF (Teflon AF 2400) polymer coating, the sorption kinetics of the Pd 67 Co 33 /TAF sensor are significantly accelerated, with t 90 < 0.4 s and t 10 < 2.8 s over the same pressure range. When the Pd 67 Co 33 /TAF sensor is further coated with a 100-nm poly(methyl methacrylate) (PMMA) layer, a rapid sorption time of t 90 < 0.5 s, LOD < 1 ppm and excellent sensor accuracy (<2.5% full scale) are maintained, while the sensor obtains strong selectivity against interference gases and moisture and a negligible aging effect. The MCD nano-cap sensor platform may have a great impact on the future deployment of H 2 fuel, H 2 environmental monitoring sensors, and fast proton-based magneto-ionic devices.

Fast and sensitive hydrogen sensors↗

Application of Covariances to Fast Reactor Core Analysis

In the present paper, the current status of covariance applications to fast reactor analysis and design is summarized with actual examples. The covariance applications are classified into three fields. First, covariances are used to quantify the uncertainty of nuclear core parameters such as criticality, control rod worth, reaction rate ratio, power distribution, sodium void reactivity, etc. The special features of the Japanese case are to include both the burnup-related parameters such as burnup reactivity loss or fuel composition changes, and the temperature-related parameter, that is, the Doppler reactivity. Second, covariances are used to select the important nuclides, reactions and energy ranges which are dominant to the uncertainty of core parameters, and to give nuclear scientists recommendations to improve the accuracy of the data. Finally, covariances are used to improve the accuracy of core design values by adopting the integral data such as the critical experiments and the power reactor operation data. The way toward improvement is classified into the conventional E/C (Experiment/Calculation) bias method and the more comprehensive cross section adjustment based on the Bayesian theorem and the generalized least square method. In Japan, an adjusted group-constant set, ADJ2000R, is now being used in the design work for future fast reactors.

99 GENERAL AND MISCELLANEOUS↗

Multi-principal element alloys for fast reactor cladding applications

Given the extensive list of multi-principal element alloys (MPEAs) within literature and the overwhelming number of alloys that can be made from only a handful of elements, this article proposes a methodology for prioritizing alloys for use as cladding within advanced reactors. This paper applies neutronic, mechanical, and chemical assessments to a collection of MPEAs available within literature for use as advanced reactor cladding. The results are compared to a reference design of HT9, a ferritic/martensitic steel, for employed in sodium-cooled fast reactor. Mechanical assessments determined pressure limits for a thin-walled tube pressure boundary, thus relating the material's mechanical properties to a minimum acceptable wall thickness. Neutronic analyses reveal a maximum allowable wall thickness that a given material must meet to provide a level of neutronic economy that is equivalent to than that of HT9. Lastly, each alloying element is compared to typical fission products found in a fast reactor fuels to mitigate deleterious phenomena such as fuel-cladding chemical interactions (FCCI). These analyses indicate that Mo-Nb-Ti-V-based alloys are likely to be advantageous and that the inclusion of elements with a high neutronic penalty (e.g., Hf) could be considered with minimal consequences.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗