Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Incoherent Dynamics of Intense Proton Beams under Electron Cooling

The minimum emittance of ion beams achieved using electron cooling is limited by the heating processes of Intra Beam Scattering and diffusion driven by resonance crossing of particles due to space-charge. We describe a new experiment to explore the intense space-charge regime with a transverse tune shift approaching -0.5 using 2.5~MeV protons at the Integrable Optics Test Accelerator (IOTA) at Fermilab. We also report on the results from PyORBIT simulations incorporating transverse space-charge and electron cooling with emphasis on the incoherent dynamics of the particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Aerodynamic Improvement of a Compact Centrifugal Compressor

For the example of the JetCat P-200RX turbojet engine, optimization of the diffuser and straightening unit of a compact centrifugal compressor is considered, on the basis of a mathematical model of viscous turbulent air flow. The goal of optimization is to increase the isentropic (adiabatic) efficiency of the compressor.

42 ENGINEERING↗

Nanostructured ZnO-Based Electrochemical Sensor with Anionic Surfactant for the Electroanalysis of Trimethoprim

In this research, detection of trimethoprim (TMP) was carried out using a nanostructured zinc oxide nanoparticle-modified carbon paste electrode (ZnO/CPE) with an anionic surfactant and sodium dodecyl sulphate (SDS) with the help of voltametric techniques. The electrochemical nature of TMP was studied in 0.2 M pH 3.0 phosphate-buffer solution (PBS). The developed electrode displayed the highest peak current compared to nascent CPE. Effects of variation in different parameters, such as pH, immersion time, scan rate, and concentration, were investigated. The electrode process of TMP was irreversible and diffusion controlled with two electrons transferred. The effective concentration range (8.0 × 10 -7 M–1.0 × 10 -5 M) of TMP was obtained by varying the concentration with a lower limit of detection obtained to be 2.58 × 10 -8 M. In addition, this approach was effectively employed in the detection of TMP in pharmaceutical dosages and samples of urine with the excellent recovery data, suggesting the potency of the developed electrode in clinical and pharmaceutical sample analysis.

36 MATERIALS SCIENCE↗

Single-Step Fabrication of Au-Fe-BaTiO3 Nanocomposite Thin Films Embedded with Non-Equilibrium Au-Fe Alloyed Nanostructures

Nanocomposite thin film materials present great opportunities in coupling materials and functionalities in unique nanostructures including nanoparticles-in-matrix, vertically aligned nanocomposites (VANs), and nanolayers. Interestingly the nanocomposites processed through a non-equilibrium processing method, e.g., pulsed laser deposition (PLD), often possess unique metastable phases and microstructures that could not achieve using equilibrium techniques, and thus lead to novel physical properties. In this work, a unique three-phase system composed of BaTiO3 (BTO), with two immiscible metals, Au and Fe, is demonstrated. By adjusting the deposition laser frequency from 2 Hz to 10 Hz, the phase and morphology of Au and Fe nanoparticles in BTO matrix vary from separated Au and Fe nanoparticles to well-mixed Au-Fe alloy pillars. This is attributed to the non-equilibrium process of PLD and the limited diffusion under high laser frequency (e.g., 10 Hz). The magnetic and optical properties are effectively tuned based on the morphology variation. This work demonstrates the stabilization of non-equilibrium alloy structures in the VAN form and allows for the exploration of new non-equilibrium materials systems and their properties that could not be easily achieved through traditional equilibrium methods.

36 MATERIALS SCIENCE↗

Finding the Remnants of the Milky Way's Last Neutron Star Mergers

The discovery of a binary neutron star merger (NSM) through both its gravitational wave and electromagnetic emission has revealed these events to be key sites of $r$-process nucleosynthesis. Here, we evaluate the prospects of finding the remnants of Galactic NSMs by detecting the gamma-ray decay lines from their radioactive $r$-process ejecta. We find that 126 Sn, which has several lines in the energy range 415-695 keV and resides close to the second $r$-process peak, is the most promising isotope, because of its half-life $t_{1/2}$ = 2:30(14) 10 5 yr being comparable to the ages of recent NSMs. Using a Monte Carlo procedure, we predict that multiple remnants are detectable as individual sources by next-generation $\gamma$-ray telescopes which achieve sub-MeV line sensitivities of ~18 -8 -10 -6 $\gamma$ cm -2 s -1 . However, given the unknown locations of the remnants, the most promising search strategy is a systematic survey of the Galactic plane and bulge extending to high Galactic latitudes. Individual known supernova remnants which may be mis-classi ed NSM remnants could also be targeted, especially those located outside the Galactic plane. Detection of a moderate sample of Galactic NSM remnants would provide important clues to unresolved issues such as the production of actinides in NSMs, properties of merging NS binaries, and even help distinguish them from rare supernovae as current Galactic $r-$process sources. We also investigate the diffuse flux from longer-lived nuclei (e.g. 182 Hf) that could in principle trace the Galactic spatial distribution of NSMs over longer timescales, but find that the detection of the diffuse flux appears challenging even with next-generation telescopes.

79 ASTRONOMY AND ASTROPHYSICS↗

Anomalous Distributions of Primary Cosmic Rays as Evidence for Time-dependent Particle Acceleration in Supernova Remnants

Recent precise measurements of cosmic-ray (CR) spectra show that the energy distribution of protons is softer than those of heavier nuclei, and there are spectral hardenings for all nuclear compositions above ∼200 GV. Models proposed for these anomalies generally assume steady-state solutions of the particle acceleration process. We show that if the diffusion coefficient has a weak dependence on the particle rigidity near shock fronts of supernova remnants (SNRs), time-dependent solutions of the linear diffusive shock acceleration at two stages of SNR evolution can naturally account for these anomalies. The high-energy component of CRs is dominated by acceleration in the free expansion and adiabatic phases with enriched heavy elements and a high shock speed. The low-energy component may be attributed to acceleration by slow shocks propagating in dense molecular clouds with low metallicity in the radiative phase. Instead of a single power-law distribution, the spectra of time-dependent solutions soften gradually with the increase of energy, which may be responsible for the “knee” of CRs.

79 ASTRONOMY AND ASTROPHYSICS↗

Process controls introduction of selected impurities into semiconductor wafers

Modified three-step process controls the concentration of lithium diffused as a dopant into the base region of a diffused n-on-p silicon solar cell wafer. Part of the surface layer of the base region of the p-type silicon containing the diffused dopant is removed, prior to redistributing the remaining portion of the dopant into the bulk of the wafer.

Bartholomay, W. C.↗

Test and inspection for process control of monolithic circuits

Report details the test and inspection procedures for the mass production of high reliability integrated circuits. It covers configuration control, basic fundamentals of quality control, control charts, wafer process evaluation, general process evaluation, evaluation score system, and diffusion evaluation.

Spangenberg, E.↗

Laminated sheet composites reinforced with modular filament sheet

Aluminum and magnesium composite sheet laminates reinforced with low density, high strength modular filament sheets are produced by diffusion bonding and explosive bonding. Both processes are accomplished in normal atmosphere and require no special tooling or cleaning other than wire brushing the metal surfaces just prior to laminating.

Reece, O. Y.↗

Ultrahigh Energy Gamma-rays

An analysis is made of the interactions of very high energy cosmic ray protons with the relict radiation in extragalactic space. Two situations are examined: gamma rays derived from neutral pions -mesons produced in collisions in a nonevolutionary situation and gamma rays from electron pairs produced at early epochs. It is shown that the ultrahigh energy gamma rays could conceivably be of high enough intensity to be detected. The flux of gamma rays from the second process is not far from the diffuse background that was reported.

Strong, A. W.↗

LPE growth of GaAs-Ga/1-x/Al/x/As solar cells

The procedures for the liquid phase epitaxial (LPE) growth of high efficiency p-Ga(1-x)Al(x)As,p-GaAs,n-GaAs solar cells have been developed. The methods are based on forming the structure by a one-step process in which the Zn-diffused p-n junction in the n-type GaAs substrate forms in conjunction with the LPE growth of the Zn-doped p-Ga(1-x)Al(x)As layer. For structures with 1-10 micron thick Ga(1-x)Al(x)As layers, an isothermal soak of the GaAs substrate in a saturated Ga-Al-As: Zn melt followed by ramp cooling produces good cells. For structures with less than one micron thick Ga(1-x)Al(x)As layers, it is necessary to isothermally soak the GaAs substrate in an undersaturated melt, and ramp cooling is not required.

Woodall, J. M.↗

Properties of the stratospheric aerosol layer studied with a one-dimensional computer model

Aerosol particle effects are often neglected in theoretical studies of stratospheric phenomena. In reality, the particulate matter normally found above the tropopause may influence the terrestrial radiation balance, catalyze heterogeneous chemical interactions, and serve as a tracer of atmospheric motions. The paper proposes a one-dimensional model of the stratospheric aerosol layer, and it is used to compare aerosol theory with observational data. The model considers gaseous sulfur photochemistry and the physical aerosol processes of nucleation, coagulation, sedimentation, and diffusion. Calculations of the effects on the aerosol layer of stratospheric injections of aluminum oxide particles by Space Shuttle engines and of sulfur dioxide molecules by volcanic activity are performed. The relation between measured aerosol variability and changes in stratospheric air temperatures and vertical transport rates are discussed.

Turco, R. P.↗

A kinetic approach to compressible turbulence

A kinetic theory of strong turbulence is developed by decomposing fluctuation of distribution function into scaled components, or ranks, to represent three transport processes: macroscopic evolution, transport property and relaxation. Closure is obtained by formulating a relaxation process for the approach of eddy diffusivity to equilibrium. The kinetic equation is solved and three transport functions of turbulence in adiabatic gas are derived: two transfer functions describe turbulent mode transfer, and a coupling function describes the build-up of kinetic energy at the expense of internal energy. The energy balance in the inertial subrange of homogeneous and isotropic turbulence in an adiabatic gas yields a k to the -3rd law, in agreement with numerical computations from one dimensional model of compressible turbulence.

Tchen, C. M.↗

Measuring Diffusion and Recombination in Polycrystalline Silicon

Light-beam-induced currents yield information about solar cell material. Apparatus measures short-circuit current generated when spot of concentrated light is scanned across grains and grain boundaries in material under test. Technique used to evaluate SOC samples for diffusion and recombination effects of cell processing and chemical and structural defects.

Zook, J. D.↗

Gravity waves in the middle atmosphere: Recent progress and needed studies

The recent recognition of the important role played by gravity waves in the large-scale circulation and thermal structure of the mesosphere and lower thermosphere has stimulated considerable research on their properties and their middle atmosphere effects. For example, these studies have begun to provide important information on gravity wave scales, propagation, filtering, and the processes responsible for saturation and turbulent diffusion. There remain, however, many areas in which our current understanding of middle atmosphere gravity waves is deficient. The purpose here is to review the progress that has been made to date and to suggest areas in which additional studies are most needed. Gravity wave scales, gravity wave saturation mechanisms, turbulence production and turbulent diffusion, and distribution of gravity wave energies and momentum fluxes with height and time are discussed.

Fritts, D. C.↗

The split-cross-bridge resistor for measuring the sheet resistance, linewidth, and line spacing of conducting layers

A new test structure was developed for evaluating the line spacing between conductors on the same layer using an electrical measurement technique. This compact structure can also be used to measure the sheet resistance, linewidth, and line pitch of the conducting layer. Using an integrated-circuit fabrication process, this structure was fabricated in diffused polycrystalline silicon and metal layers and measured optically and electrically. For the techniques used, the optical measurements were typically one-quarter micron greater than the electrical measurements. Most electrically measured line pitch values were within 2 percent of the designed value. A small difference between the measured and designed line pitch is used to validate sheet resistance, linewidth, and line spacing values.

Buehler, M. G.↗

Fast Measurements Of Thermal Diffusivities Of Ceramics

Temperature rises of samples compared with reference sample. Apparatus quickly measures thermal diffusivities of ceramics at high temperatures. Produces data on relative thermal diffusivities of as many as six ceramic specimens per hour. Thermal-diffusivity tester makes it easy to determine thermal diffusivities of ceramics. Pronounced effects of processing parameters on thermal properties of ceramics evaluated quickly.

Smith, Marnell↗