Search NASA⌕ Search

SEARCH · Search NASA

Results for “etch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Silicon nanostructures-induced photoelectrochemical solar water splitting for energy applications

We study the photoelectrochemical (PEC) solar water splitting assisted with synthesized nanostructures. Si nanowires decorated with silver dendrite nanostructures have been synthesized using metal assisted wet chemical etching of (100) Si wafer. Etching has been carried out in an aqueous solution consisting of 5M HF and 0.02M AgNO{sub 3}. Investigations showed that such type of semiconductor nanostructures act as efficient working electrodes for the splitting of normal water in PEC method. An enhancement in the photon-to-current conversion efficiency and solar-to-hydrogen evolution was observed for obtaining a practical source of clean and renewable fuel.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

“Virtual IED sensor” at an rf-biased electrode in low-pressure plasma

Energy distribution and the flux of the ions coming on a surface are considered as the key-parameters in anisotropic plasma etching. Since direct ion energy distribution (IED) measurements at the treated surface during plasma processing are often hardly possible, there is an opportunity for virtual ones. This work is devoted to the possibility of such indirect IED and ion flux measurements at an rf-biased electrode in low-pressure rf plasma by using a “virtual IED sensor” which represents “in-situ” IED calculations on the absolute scale in accordance with a plasma sheath model containing a set of measurable external parameters. The “virtual IED sensor” should also involve some external calibration procedure. Applicability and accuracy of the “virtual IED sensor” are validated for a dual-frequency reactive ion etching (RIE) inductively coupled plasma (ICP) reactor with a capacitively coupled rf-biased electrode. The validation is carried out for heavy (Ar) and light (H{sub 2}) gases under different discharge conditions (different ICP powers, rf-bias frequencies, and voltages). An EQP mass-spectrometer and an rf-compensated Langmuir probe (LP) are used to characterize plasma, while an rf-compensated retarded field energy analyzer (RFEA) is applied to measure IED and ion flux at the rf-biased electrode. Besides, the pulsed selfbias method is used as an external calibration procedure for ion flux estimating at the rf-biased electrode. It is shown that pulsed selfbias method allows calibrating the IED absolute scale quite accurately. It is also shown that the “virtual IED sensor” based on the simplest collisionless sheath model allows reproducing well enough the experimental IEDs at the pressures when the sheath thickness s is less than the ion mean free path λ{sub i} (s < λ{sub i}). At higher pressure (when s > λ{sub i}), the difference between calculated and experimental IEDs due to ion collisions in the sheath is observed in the low energy range. The effect of electron impact ionization in the sheath on the origin and intensity of low-energy peaks in IED is discussed compared to ion charge-exchange collisions. Obviously, the extrapolation of the “virtual IED sensor” approach to higher pressures requires developing some other sheath models, taking into account both ion and electron collisions and probably including even a model of the whole plasma volume instead of plasma sheath one.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radial direct bandgap p-i-n GaNP microwire solar cells with enhanced short circuit current

We report the demonstration of dilute nitride heterostructure core/shell microwire solar cells utilizing the combination of top-down reactive-ion etching to create the cores (GaP) and molecular beam epitaxy to create the shells (GaNP). Systematic studies of cell performance over a series of microwire lengths, array periods, and microwire sidewall morphologies examined by transmission electron microscopy were conducted to shed light on performance-limiting factors and to optimize the cell efficiency. We show by microscopy and correlated external quantum efficiency characterization that the open circuit voltage is degraded primarily due to the presence of defects at the GaP/GaNP interface and in the GaNP shells, and is not limited by surface recombination. Compared to thin film solar cells in the same growth run, the microwire solar cells exhibit greater short circuit current but poorer open circuit voltage due to greater light absorption and number of defects in the microwire structure, respectively. The comprehensive understanding presented in this work suggests that performance benefits of dilute nitride microwire solar cells can be achieved by further tuning of the epitaxial quality of the underlying materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Edge structures and properties of triangular antidots in single-layer MoS{sub 2}

Density functional theory and experiments are employed to shed light on the edge structures of antidots in O etched single-layer MoS{sub 2}. The equilibrium morphology is found to be the zigzag Mo edge with each Mo atom bonded to two O atoms, in a wide range of O chemical potentials. Scanning electron microscopy shows that the orientation of the created triangular antidots is opposite to the triangular shape of the single-layer MoS{sub 2} samples, in agreement with the theoretical predictions. Furthermore, edges induced by O etching turn out to be p-doped, suggesting an effective strategy to realize p-type MoS{sub 2} devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optically pumped deep-UV multimode lasing in AlGaN double heterostructure grown by molecular beam homoepitaxy

Multimode lasing at sub-300 nm wavelengths is demonstrated by optical pumping in AlGaN heterostructures grown on single-crystal AlN substrates by plasma-assisted molecular beam epitaxy. Edge-emitting ridge-based Fabry–Pérot cavities are fabricated with the epitaxial AlN/AlGaN double heterostructure by a combined inductively coupled plasma reactive ion etch and tetramethylammonium hydroxide etch. The emitters exhibit peak gain at 284 nm and modal linewidths on the order of 0.1 nm at room temperature. The applied growth technique and its chemical and heterostructural design characteristics offer certain unique capabilities toward further development of electrically injected AlGaN laser diodes.

36 MATERIALS SCIENCE↗

Fabrication of microcapillaries in fused silica using axicon focusing of femtosecond laser radiation and chemical etchingion/ms

Fabrication of microcapillaries with a diameter of 50 - 80 {mu}m and a length up to 2.5 mm in fused silica by axicon focusing of femtosecond laser radiation and subsequent chemical etching in a 8 % hydrofluoric acid solution is demonstrated. The etching rate is {approx}6 {mu}m min{sup -1}. It is shown that the microcapillaries have optical waveguiding properties, which testifies to the optical quality of the walls of obtained structures. (extreme light fields and their applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser nanoablation of diamond surface at high pulse repetition rates

The chemical etching of the surface of a natural diamond single crystal irradiated by subpicosecond laser pulses with a high repetition rate (f⩽500 kHz) in air is experimentally investigated. The irradiation has been performed by the second-harmonic (515 nm) radiation of a disk Yb : YAG laser. Dependences of the diamond surface etch rate on the laser energy density and pulse repetition rate are obtained. (interaction of laser radiation with matter)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Depth-dependent magnetism in epitaxial MnSb thin films: effects of surface passivation and cleaning

Depth-dependent magnetism in MnSb(0001) epitaxial films has been studied by combining experimental methods with different surface specificities: polarized neutron reflectivity, x-ray magnetic circular dichroism (XMCD), x-ray resonant magnetic scattering and spin-polarized low energy electron microscopy (SPLEEM). A native oxide {approx}4.5 nm thick covers air-exposed samples which increases the film's coercivity. HCl etching efficiently removes this oxide and in situ surface treatment of etched samples enables surface magnetic contrast to be observed in SPLEEM. A thin Sb capping layer prevents oxidation and preserves ferromagnetism throughout the MnSb film. The interpretation of Mn L{sub 3,2} edge XMCD data is discussed.

36 MATERIALS SCIENCE↗

Plasma treatment of bulk niobium surface for superconducting rf cavities: Optimization of the experimental conditions on flat samples

Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate nonsuperconductive pollutants in the penetration depth region and to remove the mechanically damaged surface layer, which improves the surface roughness. Here we show that the plasma treatment of bulk niobium (Nb) presents an alternative surface preparation method to the commonly used buffered chemical polishing and electropolishing methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on the Nb removal rate on flat samples. We have achieved an etching rate of 1.7 μm/min⁡ using only 3% chlorine in the reactive mixture. Combining a fast etching step with a moderate one, we have improved the surface roughness without exposing the sample surface to the environment. We intend to apply the optimized experimental conditions to the preparation of single cell cavities, pursuing the improvement of their rf performance.

43 PARTICLE ACCELERATORS↗

Using Minority Carrier Lifetime Measurement to Determine Saw Damage Characteristics on Si Wafer Surfaces

The damage on the Si wafer surfaces, caused by ingot cutting, is determined from measurement of minority carrier lifetime (..tau..eff). Samples are sequentially etched to remove thin layers from each surface and lifetime is measured after each etch step. The thickness-removed at which the lifetime reaches a peak value corresponds to the damage depth. This technique also allows the depth distribution of the damage to be quantified in terms of surface recombination velocity (SRV). An accurate measurement of ..tau..eff requires corrections to optical reflection, and transmission to account for changes in the surface morphology and in the wafer thickness.

14 SOLAR ENERGY↗

Pinhole Formation in Poly-Si/SiOx Passivating Contacts on Si(111)-Oriented Textures

Poly-Si/SiOx passivating contacts were grown on inverted pyramid and random pyramid textured wafers to investigate the hypothesis that pinhole formation is most susceptible at the valleys and edges of a textured surface. Tetramethylammonium hydroxide (TMAH) etching and electron beam induced current (EBIC) were used to assess pinhole formation and charge-carrier transport. Scanning electron microscopy revealed that TMAH etching can expose pinhole locations on textured surfaces. We show that pinholes may preferentially form at the vertices of inverted pyramids. Our TMAH and EBIC analyses on random pyramids show no preferential oxide breakup at the pyramid valleys.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Surface loss rates of H and Cl radicals in an inductively coupled plasma etcher derived from time-resolved electron density and optical emission measurements

A study is undertaken of the loss kinetics of H and Cl atoms in an inductively coupled plasma (ICP) reactor used for the etching of III-V semiconductor materials. A time-resolved optical emission spectroscopy technique, also referred to as pulsed induced fluorescence (PIF), has been combined with time-resolved microwave hairpin probe measurements of the electron density in a pulsed Cl{sub 2}/H{sub 2}-based discharge for this purpose. The surface loss rate of H, k{sub w}{sup H}, was measured in H{sub 2} plasma and was found to lie in the 125-500 s{sup -1} range ({gamma}{sub H} surface recombination coefficient of {approx}0.006-0.023), depending on the reactor walls conditioning. The PIF technique was then evaluated for the derivation of k{sub w}{sup Cl}, and {gamma}{sub Cl} in Cl{sub 2}-based plasmas. In contrast to H{sub 2} plasma, significant variations in the electron density may occur over the millisecond time scale corresponding to Cl{sub 2} dissociation at the rising edge of the plasma pulse. By comparing the temporal evolution of the electron density and the Ar-line intensity curves with 10% of Ar added in the discharge, the authors show that a time-resolved actinometry procedure using Ar as an actinometer is valid at low to moderate ICP powers to estimate the Cl loss rate. They measured a Cl loss rate of {approx}125-200 s{sup -1} (0.03{<=}{gamma}{sub Cl}{<=}0.06) at 150 W ICP power for a reactor state close to etching conditions. The Cl surface loss rate was also estimated for high ICP power (800 W) following the same procedure, giving a value of {approx}130-150 s{sup -1} ({gamma}{sub Cl}{approx}0.04), which is close to that measured at 150 W ICP power.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orientation-dependent ion beam sputtering at normal incidence conditions in FeSiAl alloy

The authors have performed Ar+ broad ion beam sputtering of a polycrystalline Fe-Si-Al alloy at normal incidence at energies varying from 6 to 10 keV. Sputtering results in the formation of etch pits, which can be classified in three shapes: triangular, rectangular, and square. As each grain of individual orientation exhibits a certain type of pattern, the etch pits were correlated with the crystal orientations by electron backscattered diffraction technique.

36 MATERIALS SCIENCE↗

Glancing angle deposition of Ge nanorod arrays on Si patterned substrates

A periodic arrangement of Ge nanorods on a Si(111) substrate was realized by glancing angle deposition (GLAD) onto honeycomb-like arranged Au hillocks formed using a self-assembled monolayer of polystyrene nanospheres as an evaporation mask. Additionally, a honeycomb-like arrangement of Au dots was used as an etch mask in a reactive ion beam etching process for pattern transfer procedure. Resulting honeycomb patterns consisting of Si hillocks within the Si(111) substrates were utilized to deposit Ge nanorods. Effective morphological variations in shape and dimension of GLAD-grown nanorods on honeycomb-like patterned substrates with both Au dot and Si dot arrays are strongly influenced by interseed distances, seed heights, and consequently shadowing lengths. For a large pattern period, it was observed that the usual triangular shape of the nanorod changed to a hexagonal shape as an effect of additional particle flux that reached the growing nanorod from the direction of second and third-nearest neighbors due to inadequate shadowing lengths and increased interseed condensation.

36 MATERIALS SCIENCE↗

Damage by radicals and photons during plasma cleaning of porous low-k SiOCH. I. Ar/O{sub 2} and He/H{sub 2} plasmas

Porous dielectric materials offer lower capacitances that reduce RC time delays in integrated circuits. Typical porous low dielectric (low-k) materials include SiOCH-silicon dioxide with carbon groups, principally -CH{sub 3}, lining the pores. Fluorocarbon plasmas are often used to etch such low-k materials. These processes leave a fluorocarbon polymer on the SiOCH surface that must be removed, often with oxygen or hydrogen containing plasmas. Pores open to the surface and that are internally connected provide pathways for reactive species to enter into the porous network and produce damage. For example, during cleaning using O{sub 2} containing plasmas, reactions of O atoms with -CH{sub 3} groups can increase the k-value by removing C atoms. Vacuum ultraviolet (VUV) photons produced by the plasma and that penetrate into the material can scission -Si-CH{sub 3} bonds and accelerate the removal of -CH{sub 3} groups. This paper reports on results from a computational investigation of Ar/O{sub 2} and He/H{sub 2} plasma cleaning of porous SiOCH when including the effects of VUV photons. The authors found that He/H{sub 2} plasmas are able to clean CF{sub x} polymers deposited during etching while producing milder damage to underlying -CH{sub 3} sites compared to O{sub 2} plasmas due to the lower reactivity of H atoms and the shorter penetration distance of photons produced in He/H{sub 2} plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cl atom recombination on silicon oxy-chloride layers deposited on chamber walls in chlorine-oxygen plasmas

Chlorine atom recombination coefficients were measured on silicon oxy-chloride surfaces deposited in a chlorine inductively coupled plasma (ICP) with varying oxygen concentrations, using the spinning wall technique. A small cylinder embedded in the walls of the plasma reactor chamber was rapidly rotated, repetitively exposing its surface to the plasma chamber and a differentially pumped analysis chamber housing a quadruple mass spectrometer for line-of-sight desorbing species detection, or an Auger electron spectrometer for in situ surface analysis. The spinning wall frequency was varied from 800 to 30 000 rpm resulting in a detection time, t (the time a point on the surface takes to rotate from plasma chamber to the position facing the mass or Auger spectrometer), of {approx}1-40 ms. Desorbing Cl{sub 2}, due to Langmuir-Hinshelwood (LH) Cl atom recombination on the reactor wall surfaces, was detected by the mass spectrometer and also by a pressure rise in one of the differentially pumped chambers. LH Cl recombination coefficients were calculated by extrapolating time-resolved desorption decay curves to t = 0. A silicon-covered electrode immersed in the plasma was either powered at 13 MHz, creating a dc bias of -119 V, or allowed to electrically float with no bias power. After long exposure to a Cl{sub 2} ICP without substrate bias, slow etching of the Si wafer coats the chamber and spinning wall surfaces with an Si-chloride layer with a relatively small amount of oxygen (due to a slow erosion of the quartz discharge tube) with a stoichiometry of Si:O:Cl = 1:0.38:0.38. On this low-oxygen-coverage surface, any Cl{sub 2} desorption after LH recombination of Cl was below the detection limit. Adding 5% O{sub 2} to the Cl{sub 2} feed gas stopped etching of the Si wafer (with no rf bias) and increased the oxygen content of the wall deposits, while decreasing the Cl content (Si:O:Cl = 1:1.09:0.08). Cl{sub 2} desorption was detectable for Cl recombination on the spinning wall surface coated with this layer, and a recombination probability of {gamma}{sub Cl} = 0.03 was obtained. After this surface was conditioned with a pure oxygen plasma for {approx}60 min, {gamma}{sub Cl} increased to 0.044 and the surface layer was slightly enriched in oxygen fraction (Si:O:Cl = 1:1.09:0.04). This behavior is attributed to a mechanism whereby Cl LH recombination occurs mainly on chlorinated oxygen sites on the silicon oxy-chloride surface, because of the weak Cl-O bond compared to the Cl-Si bond.

36 MATERIALS SCIENCE↗

Modeling of inductively coupled plasma Ar/Cl{sub 2}/N{sub 2} plasma discharge: Effect of N{sub 2} on the plasma properties

A global kinetic model of Cl{sub 2}/Ar/N{sub 2} plasma discharge has been developed, which allows calculation of the densities and fluxes of all neutral and charged species considered in the reaction scheme, as well as the electron temperature, as a function of the operating conditions. In this work, the results from the global model are first compared to the calculations given by other models. Our simulation results are focused on the effect of nitrogen adding to the Cl{sub 2}/Ar plasma mixture, which impacts both neutral and charged species transport phenomena. The N{sub 2} percentage is varied to the detriment of Cl{sub 2} by keeping the total flow rates of Cl{sub 2} and N{sub 2} constant. In order to better understand the impact of N{sub 2} addition to the Cl{sub 2}/Ar gas mixture, the authors analyzed the output plasma parameters calculated from the model for different N{sub 2} flow rate percentages. Indeed, the simulation results show a decrease in electron density and an increase in electron temperature with increasing percentage of N{sub 2}. Particular attention is paid to the analysis of electronegativity, Cl{sub 2} and N{sub 2} dissociation, and positive ion to neutral flux ratio evolution by varying percentage of N{sub 2}. Such parameters have a direct effect on the etching anisotropy of the materials during the etching process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-resolution chemical patterns from negative tone resists for the integration of extreme ultraviolet patterns of metal-oxide resists with directed self-assembly of block copolymers

Extreme ultraviolet (EUV) lithography faces significant challenges in designing suitable resist materials that can provide adequate precision, while maintaining economically viable throughput. These challenges in resist materials have led to printing failures and high roughness in EUV patterns, compromising the performance of semiconductor devices. Integrating directed self-assembly (DSA) of block copolymers (BCPs) with EUV lithography offers a promising solution because, while the BCPs register to the EUV-defined chemical guiding pattern, the thermodynamically determined structures of the BCPs automatically rectify defects and roughness in the EUV pattern. Despite the superior resolution of metal-oxide EUV resists (MORs), their application to DSA is limited by the difficulty in converting them into chemical patterns that allow effective transfer of the rectified patterns of DSA films into inorganic materials. To address this challenge, this study introduces a novel strategy for fabricating chemical patterns using hydrogen silsesquioxane (HSQ), a high-resolution negative tone inorganic resist, as a model system for MORs. Initially, a sacrificial Cr pattern is generated from HSQ patterns via reactive ion etching. The sacrificial Cr pattern is converted into a chemical pattern by first grafting a water-soluble polyethylene oxide brush onto the substrate, then wet etching the Cr, and finally grafting nonpolar polystyrene brushes. Assembling polystyrene-block-poly(methyl methacrylate) on these patterns results in structures oriented and registered with the underlying pattern, achieving 24 nm full-pitch resolutions. In conclusion, this approach has the potential to integrate MOR patterns into the DSA process, thereby enabling the generation of high-quality sub-10 nm patterns with high-χ BCPs.

Atomic force microscopy↗