Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC BALANCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Intrinsic rotation in axisymmetric devices

Toroidal rotation is critical for fusion in tokamaks, since it stabilizes instabilities that can otherwise cause disruptions or degrade confinement. Unlike present-day devices, ITER might not have enough neutral-beam torque to easily avoid these instabilities. We must therefore understand how the plasma rotates 'intrinsically,' that is, without applied torque. Experimentally, torque-free plasmas indeed rotate, with profiles that are often non-flat and even non-monotonic. The rotation depends on many plasma parameters including collisionality and plasma current, and exhibits sudden bifurcations ('rotation reversals') at critical parameter values. Since toroidal angular momentum is conserved in axisymmetric systems, and since experimentally inferred momentum transport is much too large to be neoclassical, theoretical work has focused on rotation drive by nondiffusive turbulent momentum fluxes. In the edge, intrinsic rotation relaxes to a steady state in which the total momentum outflux from the plasma vanishes. Ion drift orbits, scrape-off-layer flows, separatrix geometry, and turbulence intensity gradient all play a role. In the core, nondiffusive and viscous momentum fluxes balance to set the rotation gradient at each flux surface. Although many mechanisms have been proposed for the nondiffusive fluxes, most are treated in one of two distinct but related gyrokinetic formulations. In a radially local fluxtube, appropriate for ${\rho }_{\ast }\ll 1$, the lowest-order gyrokinetic formulations exhibit a symmetry that prohibits nondiffusive momentum flux for nonrotating plasmas in an up-down symmetric magnetic geometry with no ${\boldsymbol{E}}\times {\boldsymbol{B}}$ shear. Many symmetry-breaking mechanisms have been identified, but none have yet been conclusively demonstrated to drive a strong enough flux to explain commonly observed experimental rotation profiles. Radially global gyrokinetic simulations naturally include many symmetry-breaking mechanisms, and have shown cases with experimentally relevant levels of nondiffusive flux. These promising early results motivate further work to analyze, verify, and validate. This article provides a pedagogical introduction to intrinsic rotation in axisymmetric devices. Finally, intended for both newcomers to the topic and experienced practitioners, the article reviews a broad range of topics including experimental and theoretical results for both edge and core rotation, while maintaining a focus on the underlying concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studies of orbital Eoetvoes experiments

A direct force-balance technique was analyzed for carrying out the Eoetvoes experiment in space, which is intended to give sufficient sensitivity to allow investigation of the gravitational interactions of energy stored in the weak interaction. The heart of experiment is an exceedingly sensitive dual accelerometer, containing two proof masses constructed of the materials whose Eoetvoes ratio is to be compared. For use in development of the accelerometer, a magnetic microbalance is proposed in which the weight of the proof mass is supported by magnetic forces which vary very slowly with the proof mass position. It is shown that at least two different mechanizations of the magnetic suspension may be feasible.

Chapman, P. K.↗

New digital measurement methods for left ventricular volume using real-time three-dimensional echocardiography: comparison with electromagnetic flow method and magnetic resonance imaging

AIM: The aim of this study was to investigate the feasibility and accuracy of using symmetrically rotated apical long axis planes for the determination of left ventricular (LV) volumes with real-time three-dimensional echocardiography (3DE). METHODS AND RESULTS: Real-time 3DE was performed in six sheep during 24 haemodynamic conditions with electromagnetic flow measurements (EM), and in 29 patients with magnetic resonance imaging measurements (MRI). LV volumes were calculated by Simpson's rule with five 3DE methods (i.e. apical biplane, four-plane, six-plane, nine-plane (in which the angle between each long axis plane was 90 degrees, 45 degrees, 30 degrees or 20 degrees, respectively) and standard short axis views (SAX)). Real-time 3DE correlated well with EM for LV stroke volumes in animals (r=0.68-0.95) and with MRI for absolute volumes in patients (r-values=0.93-0.98). However, agreement between MRI and apical nine-plane, six-plane, and SAX methods in patients was better than those with apical four-plane and bi-plane methods (mean difference = -15, -18, -13, vs. -31 and -48 ml for end-diastolic volume, respectively, P<0.05). CONCLUSION: Apically rotated measurement methods of real-time 3DE correlated well with reference standards for calculating LV volumes. Balancing accuracy and required time for these LV volume measurements, the apical six-plane method is recommended for clinical use.

Evaluation Studies↗

High-field side scrape-off layer investigation: Plasma profiles and impurity screening behavior in near-double-null configurations

New experiments on Alcator C-Mod reveal that the favorable impurity screening characteristics of the high-field side (HFS) scrape-off layer (SOL), previously reported for single null geometries, is retained in double null configurations, despite the formation of an extremely thin SOL. In balanced double-null, nitrogen injected locally into the HFS SOL is better screened by a factor of 2.5 compared to the same injection into the low field side (LFS) SOL. This result is insensitive to plasma current and Greenwald fraction. Nitrogen injected into the HFS SOL is not as well screened (only a factor of 1.5 improvement over LFS) in unbalanced double-null discharges, when the primary divertor is in the direction of B×∇B. In this configuration, impurity ‘plume’ emission patterns indicate that an opposing E × B drift competes with the parallel impurity flow to the divertor. In balanced double-null plasmas, the dispersal pattern exhibits a dominant E × B motion. Unbalanced discharges with the primary divertor opposite the direction of B×∇B exhibit excellent HFS screening characteristics – a factor of 5 enhancement compared to LFS. These data support the idea that future tokamaks should locate all RF actuators and close-fitting wall structures on the HFS and employ near-double-null magnetic topologies, both to precisely control plasma conditions at the antenna/plasma interface and to maximally mitigate the impact of local impurity sources arising from plasma-material interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron critical gradient scale length measurements of ICRF heated L-mode plasmas at Alcator C-Mod tokamak

A profile for the critical gradient scale length ( L c ) has been measured in L-mode discharges at the Alcator C-Mod tokamak, where electrons were heated by an ion cyclotron range of frequency through minority heating with the intention of simultaneously varying the heat flux and changing the local gradient. The electron temperature gradient scale length ( L Te -1 = |∇ T e |/ T e ) profile was measured via the B T -jog technique and it was compared with electron heat flux from power balance (TRANSP) analysis. The T e profiles were found to be very stiff and already above the critical values, however, the stiffness was found to be reduced near the q = 3/2 surface. The measured L c profile is in agreement with electron temperature gradient (ETG) models which predict the dependence of L c -1 on local , Z eff , T e /T i , and the ratio of the magnetic shear to the safety factor. The results from linear Gene gyrokinetic simulations suggest ETG to be the dominant mode of turbulence in the electron scale ( k ⊥ ρ s > 1), and ion temperature gradient/trapped electron mode modes in the ion scale ( k ⊥ ρ s > 1). Finally, the measured L c profile is in agreement with the profile of ETG critical gradients deduced from GENE simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of particle transport, neutrals and radiation in magnetically-confined plasmas with Aurora

In this work, we present Aurora, an open-source package for particle transport, neutrals and radiation modeling in magnetic confinement fusion plasmas. Aurora's modern multi-language interface enables simulations of 1.5D impurity transport within high-performance computing frameworks, particularly for the inference of particle transport coefficients. A user-friendly Python library allows simple interaction with atomic rates from the Atomic Data and Atomic Structure database as well as other sources. This enables a range of radiation predictions, both for power balance and spectroscopic analysis. We discuss here the superstaging approximation for complex ions, as a way to group charge states and reduce computational cost, demonstrating its wide applicability within the Aurora forward model and beyond. Aurora also facilitates neutral particle analysis, both from experimental spectroscopic data and other simulation codes. Leveraging Aurora's capabilities to interface SOLPS-ITER results, we demonstrate that charge exchange is unlikely to affect the total radiated power from the ITER core during high performance operation. Finally, we describe the ImpRad module in the one modeling framework for integrated task framework, developed to enable experimental analysis and transport inferences on multiple devices using Aurora.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamical phase transitions in the collisionless pre-thermal states of isolated quantum systems: theory and experiments

Abstract We overview the concept of dynamical phase transitions (DPTs) in isolated quantum systems quenched out of equilibrium. We focus on non-equilibrium transitions characterized by an order parameter, which features qualitatively distinct temporal behavior on the two sides of a certain dynamical critical point. DPTs are currently mostly understood as long-lived prethermal phenomena in a regime where inelastic collisions are incapable to thermalize the system. The latter enables the dynamics to substain phases that explicitly break detailed balance and therefore cannot be encompassed by traditional thermodynamics. Our presentation covers both cold atoms as well as condensed matter systems. We revisit a broad plethora of platforms exhibiting pre-thermal DPTs, which become theoretically tractable in a certain limit, such as for a large number of particles, large number of order parameter components, or large spatial dimension. The systems we explore include, among others, quantum magnets with collective interactions, ϕ 4 quantum field theories, and Fermi–Hubbard models. A section dedicated to experimental explorations of DPTs in condensed matter and AMO systems connects this large variety of theoretical models.

Physics↗

Current-limited electron beam injection

The injection of an electron beam into a weakly collisional, magnetized background plasma was investigated experimentally. The injected beam was energetic and cold, the background plasma was initially isothermal. Beam and plasma dimensions were so large that the system was considered unbounded. The temporal and spatial evolution of the beam-plasma system was dominated by collective effects. High-frequency electrostatic instabilities rapidly thermalized the beam and heated the background electrons. The injected beam current was balanced by a return current consisting of background electrons drifting toward the beam source. The drift between electrons and ions gave rise to an ion acoustic instability which developed into strong three-dimensional turbulence. It was shown that the injected beam current was limited by the return current which is approximately given by the electron saturation current. Non-Maxwellian electron distribution functions were observed.

Stenzel, R. L.↗

Cloud containment by a flux of particles

It is generally believed that relatively dense gas clouds must be present in the broad-line-emitting regions of Seyfert galaxies and quasars. A possible mechanism for the containment of these dense clouds is investigated in which momentum transfer from a flux of particles produces the hydrostatic equilibrium. Using a slab geometry and requiring ionization, energy, and force balance at each point in the cloud, the physical conditions are determined as a function of position in the cloud. The calculation describes equally well the confinement by ram pressure of a cloud moving rapidly through a thin gas. An important result is that the initial relative velocity of the incident particles and the cloud must be at least 20,000 km/s in the absence of a magnetic field parallel to its surface.

Rowe, D.↗

Magsat attitude dynamics and control: Some observations and explanations

Before its reentry 7 months after launch, Magsat transmitted an abundance of valuable data for mapping the Earth's magnetic field. As an added benefit, a wealth of attitude data for study by spacecraft dynamicists was also collected. Because of its unique configuration, Magsat presented new control problems. With its aerodynamic trim boom, attitude control was given an added dimension. Minimization of attitude drift, which could be mapped in relative detail, became the goal. Momentum control, which was accomplished by pitching the spacecraft in order to balance aerodynamic and gravity gradient torques, was seldom difficult to achieve. Several interesting phenomena observed as part of this activity included occasional momentum wheel instability and a rough correlation between solar flux and the pitch angle required to maintain acceptable momentum. An overview is presented of the attitude behavior of Magsat and some of the control problems encountered. Plausible explanations for some of this behavior are offered. Some of the control philosophy used during the mission is examined and aerodynamic trimming operations are summarized.

Stengle, T. H.↗

Elemental Analysis of the JSC Mars-1 Soil Simulant using Laser Ablation and Magnetic Separation

Future long-duration missions to Mars require capabilities in terms of manufacture of structures and chemical compounds essential for human habitat and exploratory activities. Currently, it is not feasible to import all the required raw and finished materials from Earth. In fact, essential items such as structural members as well as various gases for human consumption and material processing need to be largely extracted from the available planetary resources. The resources on Mars include its soil and rocks, its atmosphere and the polar caps. Mars atmosphere consists of 95% carbon dioxide and the balance contains small percentages of oxygen, nitrogen, and argon. The Mars regolith contains many metal oxides in various mineralogical forms. Presently, Martian soil samples are not available. However, a closely matched Martian soil simulant developed by the Johnson Space Center has been available for scientific research and engineering studies. The chemical makeup of this simulant is compared with the data from Viking Lander and Path Finder missions are shown..

Nasab, Ahab S.↗

How MRI Compatible is 'MRI Compatible'? A Systematic Comparison of Artifacts Caused by Biopsy Needles at 3.0 and 1.5 T

Purpose: This study was designed to systematically investigate artifacts caused by interventional needles recommended for use in MRI, with focus on field strength, needle/mandrin type, orientation and sequence. Methods: Eight different MRI compatible needles were placed in porcine tissue and examined at 1.5 and 3.0 T with balanced-steady-state-free-precession (B-SSFP) and T1-weighted-spoiled-gradient-echo (T1-SPGR) sequences in different orientations to B{sub 0}. Artifact diameters with regards to the primary, inner, and secondary, outer artifacts were assessed and statistically evaluated. Results: The types and degree of artifacts varied considerably, especially between different mandrin types even for the same needles. Orientation of the needle in the magnetic field was another main contributor to the artifact dimensions. Less important factors were the type of pulse sequence and field strength. Artifacts ranged from 0.7 mm (steel, 0 Degree-Sign , B-SSFP, 3.0 T, inner) to 71.4 mm (nitinol, 90 Degree-Sign , B-SSFP, 1.5 T, outer). Inner artifact diameters in B-SSFP were slightly larger (8.2 {+-} 5.7 mm) than those in T1-SPGR (7.6 {+-} 5.4 mm) and comparable between 1.5 and 3.0 T (e.g., 8.0 vs. 8.4 mm, B-SSFP). Conclusions: Although all were sold as 'MR compatible,' the artifacts differed greatly between needle types, and even more so for different mandrins. The results suggest an empirical approach to the needle choice based on lesion type and approach angle.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Collisional alpha transport in a weakly rippled magnetic field

To properly treat the collisional transport of alpha particles due to a weakly rippled tokamak magnetic field the tangential magnetic drift due to its gradient (the $\unicode[STIX]{x1D735}B$ drift) and pitch angle scatter must be retained. Their combination gives rise to a narrow boundary layer in which collisions are able to match the finite trapped response to the ripple to the vanishing passing response of the alphas. Away from this boundary layer collisions are ineffective. There the $\unicode[STIX]{x1D735}B$ drift of the alphas balances the small radial drift of the trapped alphas caused by the ripple. A narrow collisional boundary layer is necessary since this balance does not allow the perturbed trapped alpha distribution function to vanish at the trapped–passing boundary. The solution of this boundary layer problem allows the alpha transport fluxes to be evaluated in a self-consistent manner to obtain meaningful constraints on the ripple allowable in a tokamak fusion reactor. A key result of the analysis is that collisional alpha losses are insensitive to the ripple near the equatorial plane on the outboard side where the ripple is high. As the high field side ripple is normally very small, collisional $\sqrt{\unicode[STIX]{x1D708}}$ ripple transport is unlikely to be a serious issue.

Physics↗

Elastic colloidal monopoles and reconfigurable self-assembly in liquid crystals

Monopole-like electrostatic interactions are ubiquitous in condensed matter, but they are often screened by counter-ions and cannot be switched from attractive to repulsive. In colloidal science, where the main goal is to develop colloidal particles that mimic and exceed the diversity and length scales of atomic and molecular assembly, electrostatically charged particles cannot change the sign of their surface charge or transform from monopoles to higher-order multipoles. In liquid-crystal colloids, elastic interactions between particles arise to minimize the free energy associated with elastic distortions in the long-range alignment of rod-like molecules around the particles. In dipolar quadrupolar and hexadecapolar nematic colloids, the symmetries of such elastic distortions mimic both electrostatic multipoles and the outermost occupied electron shells of atoms. Electric and magnetic switching, spontaneous transformations and optical control of elastic multipoles, as well as their interactions with topological defects and surface boundary conditions, have been demonstrated in such colloids. However, it has long been understood that elastic monopoles should relax to uniform or higher-order multipole states because of the elastic torques that they induce. We develop nematic colloids with strong elastic monopole moments and with elastic torques balanced by the optical torques induced by ambient light. We demonstrate the monopole-to-quadrupole reconfiguration of these colloidal particles by unstructured light, which resembles the driving of atoms between the ground state and various excited states. We show that the sign of the elastic monopoles can be switched, and that like-charged monopoles attract whereas oppositely charged ones repel, unlike in electrostatics. We also demonstrate the out-of-equilibrium dynamic assembly of these colloidal particles. This diverse and surprising behaviour is explained using a model that considers the balance of the optical and elastic torques that are responsible for the excited-state elastic monopoles and may lead to light-powered active-matter systems and self-assembled nanomachines.

36 MATERIALS SCIENCE↗

Reflux physics and an operational scenario for the spheromak

The spheromak [1] is a toroidal magnetic confinement geometry for plasma with most of the magnetic field generated by internal currents. It has been demonstrated to have excellent energy confinement properties: A peak electron temperature of 0.4 keV was achieved in the Compact Torus Experiment (CTX) experiment [2] and of 0.5 keV in the Sustained Spheromak Physics Experiment (SSPX) [3]. In both cases the plasmas were decaying slowly following formation and (in SSPX) sustainment by coaxial helicity injection (CHI) [4]. In SSPX, power balance analysis during this operational phase yielded electron thermal conductivities in the core plasma in the range of 1-10 m 2 /s [5, 6], comparable to the tokamak L-mode. These results motivate the consideration of possible operating scenarios for future fusion experiments or even reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-field side scrape-off layer investigation: plasma profiles and impurity screening behavior in near-double-null configurations

New experiments on Alcator C-Mod reveal that the favorable impurity screening characteristics of the high-field side (HFS) scrape-off layer (SOL), previously reported for single null geometries, is retained in double null configurations, despite the formation of an extremely thin SOL. In balanced double-null, nitrogen injected locally into the HFS SOL is better screened by a factor of 2.5 compared to the same injection into the low field side (LFS) SOL. This result is insensitive to plasma current and Greenwald fraction. Nitrogen injected into the HFS SOL is not as well screened (only a factor of 1.5 improvement over LFS) in unbalanced double-null discharges, when the primary divertor is in the direction of B×?B. In this configuration, impurity ‘plume’ emission patterns indicate that an opposing E X B drift competes with the parallel impurity flow to the divertor. In balanced double-null plasmas, the dispersal pattern exhibits a dominant E X B motion. Unbalanced discharges with the primary divertor opposite the direction of B×?B exhibit excellent HFS screening characteristics – a factor of 5 enhancement compared to LFS. These data support the idea that future tokamaks should locate all RF actuators and close-fitting wall structures on the HFS and employ near-double-null magnetic topologies, both to precisely control plasma conditions at the antenna/plasma interface and to maximally mitigate the impact of local impurity sources arising from plasma-material interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extreme tensile strain states in La 0.7 Ca 0.3 MnO 3 membranes

A defining feature of emergent phenomena in complex oxides is the competition and cooperation between ground states. In manganites, the balance between metallic and insulating phases can be tuned by the lattice; extending the range of lattice control would enhance the ability to access other phases. We stabilized uniform extreme tensile strain in nanoscale La 0.7 Ca 0.3 MnO 3 membranes, exceeding 8% uniaxially and 5% biaxially. Uniaxial and biaxial strain suppresses the ferromagnetic metal at distinctly different strain values, inducing an insulator that can be extinguished by a magnetic field. Electronic structure calculations indicate that the insulator consists of charge-ordered Mn 4+ and Mn 3+ with staggered strain-enhanced Jahn-Teller distortions within the plane. This highly tunable strained membrane approach provides a broad opportunity to design and manipulate correlated electron states.

36 MATERIALS SCIENCE↗

Passive Superconducting Flux Conservers for Rotating-Magnetic-Field-Driven Field-Reversed Configurations

The Princeton Field-Reversed Configuration (PFRC) experiment employs an odd-parity rotating magnetic field (RMFo) current drive and plasma heating system to form and sustain high-Β plasmas. For radial confinement, an array of coaxial, internal, passive, flux-conserving (FC) rings applies magnetic pressure to the plasma while still allowing radio-frequency RMFo from external coils to reach the plasma. The 3 ms pulse duration of the present experiment is limited by the skin time (τfc) of its room-temperature copper FC rings. To explore plasma phenomena with longer characteristic times, the pulse duration of the next-generation PFRC-2 device will exceed 100 ms, necessitating FC rings with (τfc > 300 ms. In this paper we review the physics of internal, discrete, passive FCs and describe the evolution of the PFRC's FC array. We then detail new experiments that have produced higher performance FC rings that contain embedded high-temperature superconducting (HTS) tapes. Several HTS tape winding configurations have been studied and a wide range of extended skin times, from 0.4 s to over 103 s, has been achieved. The new FC rings must carry up to 3 kA of current to balance the expected PFRC-2 plasma pressure, so the dependence of the HTS-FC critical current on the winding configuration and temperature was also studied. From these experiments, the key HTS-FC design considerations have been identified and HTS-FC rings with the desired performance characteristics have been produced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗