Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Heat recovery from sorbent-based CO.sub.2 capture

The present invention provides a method of increasing the efficiency of exothermic CO.sub.2 capture processes. The method relates to withdrawing heat generated during the exothermic capture of CO.sub.2 with various sorbents via heat exchange with a working fluid. The working fluid is provided at a temperature and pressure such that it is in the liquid state, and has a vaporization temperature in a range such that the heat arising from the reaction of the CO.sub.2 and the sorbent causes a phase change from liquid to vapor state in whole or in part and transfers heat from to the working fluid. The resulting heated working fluid may subsequently be used to generate power.

54 ENVIRONMENTAL SCIENCES↗

Theoretical Design of Thermosyphon for Process Heat Transfer from NGNP to Hydrogen Plant

The Next Generation Nuclear Plant (NGNP) will most likely produce electricity and process heat, with both being considered for hydrogen production. To capture nuclear process heat, and transport it to a distant industrial facility requires a high temperature system of heat exchangers, pumps and/or compressors. The heat transfer system is particularly challenging not only due to the elevated temperatures (up to ~ 1300K) and industrial scale power transport (=50 MW), but also due to a potentially large separation distance between the nuclear and industrial plants (100+m) dictated by safety and licensing mandates. The work reported here is the preliminary analysis of two-phase thermosyphon heat transfer performance with alkali metals. A thermosyphon is a device for transporting heat from one point to another with quite extraordinary properties. In contrast to single-phased forced convective heat transfer via ‘pumping a fluid’, a thermosyphon (also called a wickless heat pipe) transfers heat through the vaporization / condensing process. The condensate is further returned to the hot source by gravity, i.e. without any requirement of pumps or compressors. With this mode of heat transfer, the thermosyphon has the capability to transport heat at high rates over appreciable distances, virtually isothermally and without any requirement for external pumping devices. Two-phase heat transfer by a thermosyphon has the advantage of high enthalpy transport that includes the sensible heat of the liquid, the latent heat of vaporization, and vapor superheat. In contrast, single-phase forced convection transports only the sensible heat of the fluid. Additionally, vapor-phase velocities within a thermosyphon are much greater than single-phase liquid velocities within a forced convective loop. Thermosyphon performance can be limited by the sonic limit (choking) or vapor flow and/or by condensate entrainment. Proper thermosyphon requires analysis of both.

08 HYDROGEN↗

Molecular simulation of liquid–vapor coexistence for NaCl: Full-charge vs scaled-charge interaction models

Scaled-charge models have been recently introduced for molecular simulations of electrolyte solutions and molten salts to attempt to implicitly represent polarizability. Although these models have been found to accurately predict electrolyte solution dynamic properties, they have not been tested for coexistence properties, such as the vapor pressure of the melt. In this work, we evaluate the vapor pressure of a scaled-charge sodium chloride (NaCl) force field and compare the results against experiments and a non-polarizable full-charge force field. The scaled-charge force field predicts a higher vapor pressure than found in experiments, due to its overprediction of the liquid-phase chemical potential. Reanalyzing the trajectories generated from the scaled-charge model with full charges improves the estimation of the liquid-phase chemical potential but not the vapor pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supporting Data for "Pitfalls in Parameters: Practical Process Development in Chemical Vapor Processing of SiC"

CALculation of PHAse Diagrams (CALPHAD) was used to produce equilibrium phase diagrams of the MTS/H2 system. These were calculated in FactSage 8.2 using a combination of the FactPS and SGTE Solutions 2022 databases. Equilibrium was calculated for 185 gas species, 36 pure liquids, 8 pure solids, 1 liquid solution, and 22 solid solutions. Phase diagrams were calculated with 25 °C steps in temperature from 700 to 1325 °C and 10 torr steps in pressure from 20 to 760 torr.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-isothermal flow in low permeable porous media: A comparison of Richards' and two-phase flow approaches

The present work compares the performance of two alternative flow models for the simulation of thermal-hydraulic coupled processes in low permeable porous media: non-isothermal Richards and two-phase flow concepts. Both models take vaporization processes into account: however, the Richards model neglects dynamic pressure variations and bulk flow of the gaseous phase. For the comparison of the two approaches first published data from a laboratory experiment is studied involving thermally driven moisture flow in a partially saturated bentonite sample. Then a benchmark test of longer-term thermal-hydraulic behavior in the engineered barrier system of a geological nuclear waste repository is analyzed (DECOVALEX project). It was found that both models can be used to reproduce the vaporization process if the intrinsic permeability is relative high. However, when a thermal-hydraulic coupled problem has the same low intrinsic permeability for both the liquid and the gas phase, only the two-phase flow approach provides reasonable results.

54 ENVIRONMENTAL SCIENCES↗

Microstructure, phase transition, and interfacial chemistry of Gd{sub 2}O{sub 3}/Si(111) grown by electron-beam physical vapor deposition

The effects of growth temperature, film thickness, and oxygen flux on the microstructure, phase transition, and interfacial chemistry of gadolinium oxide (Gd{sub 2}O{sub 3}) films grown on Si(111) substrates by electron-beam physical vapor deposition were investigated using a combination of transmission electron microscopy (TEM), electron diffraction, scanning TEM, x-ray energy dispersive spectrometry, and electron energy loss spectrometry. The authors find that a low growth temperature (250 Degree-Sign C) and a high oxygen flux (200 sccm) led to a small grain size and a high porosity of the Gd{sub 2}O{sub 3} film. Lowering the oxygen flux to 50 sccm led to reduced film porosity, presumably due to the increased diffusion length of the Gd atoms on the surface. Increasing the growth temperature to 650 Degree-Sign C resulted in a film with large columnar grains and elongated pores at the grain boundaries. Thin films grown at 250 Degree-Sign C consisted of cubic Gd{sub 2}O{sub 3}, but thermodynamically less stable monoclinic phase formed as the film thickness increased. Lowering the oxygen flux apparently further promoted the formation of the monoclinic phase. Furthermore, monoclinic phase dominated in the films grown at 650 Degree-Sign C. Such phase transitions may be related to the stress evolution of the films at different temperatures, thicknesses, and oxygen fluxes. Enhanced Gd{sub 2}O{sub 3}/Si interfacial reaction was observed as the growth temperature, film thickness, and oxygen flux increased. Moreover, oxygen was found to play a crucial role in the Gd{sub 2}O{sub 3}/Si interfacial reaction and the formation of Gd-Si-O interface layers, which proceeded by the reaction of excess oxygen with Si followed by the intermixing of SiO{sub x} and Gd{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Plasma-enhanced atomic layer deposition of silicon dioxide films using plasma-activated triisopropylsilane as a precursor

The plasma-enhanced atomic layer deposition (PEALD) process was developed as a growth technique of SiO{sub 2} thin films using a plasma-activated triisopropylsilane [TIPS, ((iPr){sub 3}SiH)] precursor. TIPS was activated by an argon plasma at the precursor injection stage of the process. Using the activated TIPS, it was possible to control the growth rate per cycle of the deposited films by adjusting the plasma ignition time. The PEALD technique allowed deposition of SiO{sub 2} films at temperatures as low as 50 °C without carbon impurities. In addition, films obtained with plasma ignition times of 3 s and 10 s had similar values of root-mean-square surface roughness. In order to evaluate the suitability of TIPS as a precursor for low-temperature deposition of SiO{sub 2} films, the vapor pressure of TIPS was measured. The thermal stability and the reactivity of the gas-phase TIPS with respect to water vapor were also investigated by analyzing the intensity changes of the C–H and Si–H peaks in the Fourier-transform infrared spectrum of TIPS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pore-Water Extraction Intermediate-Scale Laboratory Experiments and Numerical Simulations

A series of flow cell experiments was conducted to demonstrate the process of water removal through pore-water extraction in unsaturated systems. In this process, a vacuum (negative pressure) is applied at the extraction well establishing gas and water pressure gradients towards the well. The gradient may force water and dissolved contaminants, such as 99Tc, to move towards the well. The tested flow cell configurations consist of packings, with or without fine-grained well pack material, representing, in terms of particle size distribution, subsurface sediments at the SX tank farm. A pore water extraction process should not be considered to be equal to soil vapor extraction because during soil vapor extraction, the main goal may be to maximize gas removal. For pore water extraction systems, pressure gradients in both the gas and water phases need to be considered while for soil vapor extraction purposes, gas phase flow is the only concern. In general, based on the limited set (six) of flow experiments that were conducted, it can be concluded that pore water extraction rates and cumulative outflow are related to water content, the applied vacuum, and the dimensions of the sediment layer providing the extracted water. In particular, it was observed that application of a 100-cm vacuum (negative pressure) in a controlled manner leads to pore-water extraction until the water pressure gradients towards the well approach zero. Increased cumulative outflow was obtained with an increase in initial water content from 0.11 to 0.18, an increase in the applied vacuum to 200 cm, and when the water-supplying sediment was not limited. The experimental matrix was not sufficiently large to come to conclusions regarding maximizing cumulative outflow.

54 ENVIRONMENTAL SCIENCES↗

Nucleation and Growth of MOCVD Grown (Cr, Zn)O Films: Uniform Doping vs Secondary Phase Formation

We have investigated Cr solubility and secondary phase formation in metallorganic chemical vapor deposition (MOCVD) grown (Cr, Zn)O films on Si(100). Simultaneous deposition of 0.15 M Cr(TMHD) and 0.025 M Zn(TMHD) precursors in an oxidizing environment with a flow ratio of 1:10 resulted in secondary phase formation rather than uniform Cr doping. Based on several surface and microstructural techniques, we have identified nanocrystalline ZnCr{sub 2}O{sub 4} and disordered Cr{sub 2}O{sub 3} as the secondary Cr-containing phases. Analysis suggests that ZnCr{sub 2}O{sub 4} crystallites are dispersed throughout the film, and that disordered Cr{sub 2}O{sub 3} layer may form at the interface. These results are consistent with the tendency of Cr to exhibit octahedral, rather than tetrahedral coordination with O.

36 MATERIALS SCIENCE↗

Phase 2 testing results of immobilization of WTP effluent management facility vaporator bottoms simulant

The Hanford Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) vitrification facility will generate an aqueous condensate recycle stream (LAW Melter Off-Gas Condensate) from the primary off-gas system. This work examined three waste form formulations based on previous testing with related simulants: 8 wt% ordinary portland cement (OPC), 47 wt% blast furnace slag (BFS), 45 wt% fly ash (FA) known as Cast Stone formulation; 20 wt% Aquaset® II-GH and 80 wt% BFS; 20 wt% OPC and 80 wt% BFS. These tests successfully produced one waste form that set within five days (Cast Stone formulation); however the other two formulations, Aquaset® II-GH/BFS and OPC/BFS, took approximately eight and fourteen days to set, respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Communication: Dynamical and structural analyses of solid hydrogen under vapor pressure

Nuclear quantum effects play a dominant role in determining the phase diagram of H{sub 2}. With a recently developed quantum molecular dynamics simulation method, we examine dynamical and structural characters of solid H{sub 2} under vapor pressure, demonstrating the difference from liquid and high-pressure solid H{sub 2}. While stable hexagonal close-packed lattice structures are reproduced with reasonable lattice phonon frequencies, the most stable adjacent configuration exhibits a zigzag structure, in contrast with the T-shape liquid configuration. The periodic angular distributions of H{sub 2} molecules indicate that molecules are not a completely free rotor in the vapor-pressure solid reflecting asymmetric potentials from surrounding molecules on adjacent lattice sites. Discrete jumps of librational and H–H vibrational frequencies as well as H–H bond length caused by structural rearrangements under vapor pressure effectively discriminate the liquid and solid phases. The obtained dynamical and structural information of the vapor-pressure H{sub 2} solid will be useful in monitoring thermodynamic states of condensed hydrogens.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling solvent evaporation during thin film formation in phase separating polymer mixtures

Preparation of thin films by dissolving polymers in a common solvent followed by evaporation of the solvent has become a routine processing procedure. However, modeling of thin film formation in an evaporating solvent has been challenging due to a need to simulate processes at multiple length and time scales. In this paper, we present a methodology based on the principles of linear non-equilibrium thermodynamics, which allows systematic study of various effects such as the changes in the solvent properties due to phase transformation from liquid to vapor and polymer thermodynamics resulting from such solvent transformations. The methodology allows for the derivation of evaporative flux and boundary conditions near each surface for simulations of systems close to the equilibrium. We apply it to study thin film microstructural evolution in phase segregating polymer blends dissolved in a common volatile solvent and deposited on a planar substrate. Finally, effects of the evaporation rates, interactions of the polymers with the underlying substrate and concentration dependent mobilities on the kinetics of thin film formation are studied.

36 MATERIALS SCIENCE↗

Assessing the Quality of Molecular Simulations for Vapor–Liquid Equilibria: An Analysis of the TraPPE Database

As molecular modeling and simulation techniques become increasingly important sources of thermophysical property and phase equilibrium data, the ability to assess the robustness of that data becomes more critical. Recently, the use of the compressibility factor (Z) has been suggested as a metric for testing the quality of simulation data for vapor–liquid equilibria (VLE). Int his paper, we analyze predicted VLE data from the transferable potentials for phase equilibria (TraPPE) database and show that, apart from data entry or typographical errors, Z will always be well-behaved in Gibbs ensemble Monte Carlo (GEMC) simulations even when the simulations are not sufficiently equilibrated. However, this is not true for grand canonical Monte Carlo simulations. When the pressure is calculated from the internal forces, then pressure and density are strongly correlated for the vapor phase and, for GEMC simulations, it is recommended to treat Z as an instantaneous mechanical property. From analysis of the TraPPE VLE data, we propose a complementary metric based on the predicted vapor pressures at three neighboring temperatures and their deviation from a local Clausius–Clapeyron fit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquid-based hybrid absorption cycle for water heating, dehumidification, and cooling

Water heating, dehumidification and space cooling are responsible for significant energy consumption in buildings. A potential energy saving measure is to develop hybrid systems that can utilize the sensible and latent heats removed in space cooling to heat water. In this paper, we present experimental results on a hybrid system that utilizes the latent heat released in the dehumidification process for water heating. This system absorbs water vapor from the air and transfers the heat of phase change into the process water. The absorbed water vapor is then liberated in a desorber and subsequently condensed in a condenser, while its latent heat is transferred to the process water. The condensed water vapor can then be either drained (if dehumidification is desired), or utilized in an evaporative cooling process (if sensible space cooling is desired). In essence, the system can exchange both sensible and latent heats with its ambient. The main innovations implemented in the system are (1) a semi-open absorption system architecture to lower the system cost, (2) a membrane-based absorber to alleviate the liquid entrainment issue encountered in the conventional packed bed absorbers and (3) an ionic liquid that eliminates the crystallization risks and minimizes corrosion issues normally associated with LiBr-based absorption systems. Furthermore, a water heating thermal COP of 1.4 is achieved at 30°C, 70% RH ambient conditions.

42 ENGINEERING↗

Method and apparatus for continuous removal of water vapors from gases

A method for continuously removing water vapor from a carrier gas is disclosed. This method includes, first, causing direct contact of the carrier gas with a liquid mixture in a separation chamber, the carrier gas condensing at a lower temperature than the water vapor. A combination of chemical effects cause the water vapor to condense, complex, or both condense and complex with the liquid mixture. The liquid mixture is chosen from the group consisting of: first, a combination of components that can be maintained in a liquid phase at a temperature below the water vapor's condensation point, whereby the water vapor condenses into the liquid mixture; second, a combination of components where at least one component forms a chemical complex with the water vapor and thereby extracts at least a portion of the water vapor from the carrier gas; and third, a combination of components that can both be maintained in a liquid phase at a temperature below the water vapor's condensation point, and wherein at least one component forms a chemical complex with the water vapor and thereby extracts at least a portion of the water vapor from the carrier gas. The liquid mixture is then reconstituted after passing through the separation chamber by a chemical separation process chosen to remove an equivalent amount of the water vapor from the liquid mixture as was removed from the carrier gas. The reconstituted liquid mixture is restored to temperature and pressure through heat exchange, compression, and expansion, as necessary, in preparation for recycling back to the separation chamber. The liquid mixture is then returned to the separation chamber. In this manner, the carrier gas leaving the exchanger has between 1% and 100% of the water vapor removed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Different Processing Routes for the Synthesis of Semiconducting AlSb

AlSb is a low-cost, high-band-gap semiconducting material, yet largely limited in its potential due to difficulty in the synthesis of single-phase AlSb. The present work compares different processing routes in their potency to produce bulk and nanocrystalline AlSb. Vacuum arc melting has been successfully employed, for the first time, to synthesize single-phase bulk AlSb. Owing to high vapor pressure of Sb, an optimum amount of excess Sb (3%) needs to be added to achieve single-phase line compound AlSb. Two methods, viz. mechanical alloying of elemental powders and mechanical milling of cast alloy, have been used to synthesize nanocrystalline AlSb. Nanocrystalline AlSb could be produced after ball milling the cast alloy; however, prolonged milling results in the appearance of Sb along with a non-stoichiometric Al-Sb-O oxide. Mechanical alloying of Al and Sb does not lead to appearance of single-phase AlSb, and the mixture largely consists of starting material and amorphous products. Therefore, the effectiveness of a synthesis route in producing single-phase AlSb is governed by the tendency of oxygen pickup during the processing.

36 MATERIALS SCIENCE↗

Material properties of aqueous potassium acetate solutions for use in liquid desiccant air conditioning

We present thermophysical properties of aqueous potassium acetate solutions relevant to their application as a liquid desiccant in air-conditioning systems. Liquid desiccant air conditioners could provide up to 80% energy savings compared to high-efficiency vapor compression air conditioners. However, the commonly used liquid desiccants, particularly chloride salt solutions, are highly corrosive. This precludes the use of metallic components, necessitating specialized plastics and thereby driving up cost, weight, and limiting operational temperature and pressure ranges. Potassium acetate has been identified as a less corrosive alternative, potentially enabling broader material compatibility in LDAC components. In this study we systematically measured and modelled key thermophysical properties of KAc solutions density, vapor pressure, viscosity, specific heat capacity, phase behavior, and diffusion coefficient across a range of concentrations (10 - 70wt%) and temperatures. For instance, KAc exhibits a vapor pressure of 3.1 kPa at 50wt% and 40degrees C, demonstrating dehumidification capability comparable to chloride salts. By providing an extended dataset and associated models, this work advances the understanding needed to design energy-efficient, corrosion mitigating LDAC system.

36 MATERIALS SCIENCE↗