Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Sensitivity of a thermodynamic sea ice model with leads to time step size

The characteristics of sea ice models, developed to study the physics of the growth and melt of ice at the ocean surface and the variations in ice extent, depend on the size of the time step. Thus, to study longer-term variations within a reasonable computer budget, a model with a scheme allowing longer time steps has been constructed. However, the results produced by the model can definitely depend on the length of the time step. The sensitivity of a model to time-step size can be reduced by appropriate approaches. The present investigation is concerned with experiments which use a formulation of a lead parameterization that can be considered as a first step toward the development of a lead parameterization suitable for a use in long-term climate studies.

Ledley, T. S.↗

Preferential incorporation of substitutional nitrogen near the atomic step edges in diluted nitride alloys

We have investigated the influence of the surface roughness on nitrogen incorporation during the molecular beam epitaxy of diluted nitrides, independently of the other growth parameters. GaPN/GaP layers grown simultaneously on surfaces displaying different roughnesses reveal a large difference in nitrogen incorporation despite the same growth temperature and growth rate. The same difference is found on quasi-lattice-matched GaAsPN demonstrating that the phenomenon is not related to any strain-induced mechanisms. The tendency is clearly confirmed when varying the growth conditions. As a direct consequence, the incorporation of substitutional nitrogen near the atomic step edges is found to be 6.7 times more probable than the in-plane nitrogen incorporation. The formation of N-N{sub i} clusters and their stability on the surface is discussed.

36 MATERIALS SCIENCE↗

Investigation of surface termination by directional elastic peak electron spectroscopy: Experiment and theory

Experimental and theoretical details concerning the directional elastic peak electron spectroscopy are presented. The application of this experimental method to the identification of a crystalline structure of surface layers is shown for Cu(111) and Ru(0001), which enables the analysis of different surface terminations associated with different sequences of atoms along the surface normal. Theoretical data are obtained by applying the multiple scattering theory and different sources of phase shifts. The quantitative analysis performed by an R-factor reveals almost the same populations of A and B terminated (0001) terraces and proves explicitly the presence of steps of atomic height on the clean Ru(0001) surface. This is not the case for the Cu(111) surface, where the terrace termination does not affect the distribution of atomic directions within the first few atomic layers. The averaging of theoretical data versus scattering volume defined by the sphere radius R{sub max} around the emitter site is discussed in view of the computation time optimization. - Highlights: • We examined the structure and surface termination of fcc and hcp monocrystals. • Crystalline structure within the first few atomic layers was determined by DEPES. • Multiple scattering formalism was used to obtain theoretical results. • Populations of terraces with different terminations were determined. • Scattering parameters are discussed in the context of computation time optimization.

36 MATERIALS SCIENCE↗

Interface creation on a mixed-terminated perovskite surface

In the field of complex oxide heterostructures, understanding of the initial substrate surface can be critical to fundamental studies regarding the development of emergent properties at the film–substrate interface. For this reason, a considerable amount of effort has gone into the development of techniques to achieve surfaces with single termination for a variety of perovskite single crystals. However, a decisive understanding of how an interface is created when epitaxial growth occurs on a mixed terminated surface remains lacking. Employing in situ synchrotron X-ray scattering during thin film growth by molecular beam epitaxy, we investigate the initial stages of growth on (LaAlO 3 )(Sr 2 AlTaO 6 ) (001) substrates with mixed termination. Using LaNiO 3 as a model system, we find that the surface layers of the substrate restructure during deposition such that while a NiO 2 monolayer is weakly bound, a LaO monolayer bonds strongly, effectively incorporating with (Al, Ta)O 2 from the surface and forming a La(Al, Ta)O 3 ultrathin film. <!--/abstract content--><!--fulltext content--> With regard to the synthesis of high-quality complex oxide heterostructures, it is important that the substrate meet an array of criteria related to the crystal structure, lattice parameter, thermodynamic properties, electrical and optical properties, and so on. In particular, the surface of the substrate should be atomically smooth and exhibit the step-terrace structure ideal for epitaxial thin film growth. Perovskite oxides with the formula ABO 3 have two possible (001) surfaces: AO (A-site termination) and BO 2 (B-site termination). The ability to consistently achieve one of these surface terminations on SrTiO 3 , i.e., TiO 2 , has helped SrTiO 3 become the predominant oxide in the field.

36 MATERIALS SCIENCE↗

Novel Magnetically Fluidized Bed Reactor Development for the Looping Process: Coal to Hydrogen Production R&D

The coal to hydrogen project utilizes the iron/iron oxide looping process to produce high purity hydrogen. The input energy for the process is provided by syngas coming from gasification process of coal. The reaction pathways for this process have been studied and favorable conditions for energy efficient operation have been identified. The Magnetically Stabilized Porous Structure (MSPS) is invented. It is fabricated from iron and silica particles and its repeatable high performance has been demonstrated through many experiments under various conditions in thermogravimetric analyzer, a lab-scale reactor, and a large scale reactor. The chemical reaction kinetics for both oxidation and reduction steps has been investigated thoroughly inside MSPS as well as on the surface of very smooth iron rod. Hydrogen, CO, and syngas have been tested individually as the reducing agent in reduction step and their performance is compared. Syngas is found to be the most pragmatic reducing agent for the two-step water splitting process. The transport properties of MSPS including porosity, permeability, and effective thermal conductivity are determined based on high resolution 3D CT x-ray images obtained at Argonne National Laboratory and pore-level simulations using a lattice Boltzmann Equation (LBE)-based mesoscopic model developed during this investigation. The results of those measurements and simulations provide necessary inputs to the development of a reliable volume-averaging-based continuum model that is used to simulate the dynamics of the redox process in MSPS. Extensive efforts have been devoted to simulate the redox process in MSPS by developing a continuum model consist of various modules for conductive and radiative heat transfer, fluid flow, species transport, and reaction kinetics. Both the Lagrangian and Eulerian approaches for species transport of chemically reacting flow in porous media have been investigated and verified numerically. Both approaches lead to correct prediction of hydrogen production rates over a large range of experimental conditions in the laboratory scale reactor and the bench-scale reactor. In the economic analysis, a comparison of the hydrogen production plants using iron/iron oxide looping cycle and the conventional process has been presented. Plant configurations are developed for the iron/iron oxide looping cycle. The study suggests a higher electric power generation but a lower hydrogen production efficiency comparing with the conventional process. Additionally, it was shown that the price of H 2 obtained from our reactor can be as low as $\$$1.7/kg, which is 22% lower than the current price of the H 2 obtained from reforming plants.

01 COAL, LIGNITE, AND PEAT↗

Machine-Guided Design of Oxidation-Resistant Superconductors for Quantum Information Applications

Decoherence in superconducting qubits has long been attributed to two-level systems arising from the surfaces and interfaces present in real devices. A recent significant step in reducing decoherence was the replacement of superconducting niobium by superconducting tantalum, resulting in a tripling of transmon qubit lifetimes (T1). The identity, thickness, and quality of the native surface oxide, is thought to play a major role, as tantalum only has one oxide whereas niobium has several. Here we report the development of a thermodynamic metric to rank materials based on their potential to form a well-defined, thin, surface oxide. We first computed this metric for known binary and ternary metal alloys using data available from the Materials Project and experimentally validated the strengths and limits of this metric through the preparation and controlled oxidation of eight known metal alloys. Then we trained a convolutional neural network to predict the value of this metric from atomic composition and atomic properties. This allowed us to compute the metric for materials that are not present in the Materials Project, including a large selection of known superconductors, and, when combined with Tc, allowed us to identify new candidate superconductors for quantum information science and engineering (QISE) applications. We tested the oxidation resistance of a pair of these predictions experimentally. Our results are expected to lay the foundation for the tailored and rapid selection of improved superconductors for QISE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploration of the Moon with Remote Sensing, Ground-Penetrating Radar, and the Regolith-Evolved Gas Analyzer (REGA)

There are two important reasons to explore the Moon. First, we would like to know more about the Moon itself: its history, its geology, its chemistry, and its diversity. Second, we would like to apply this knowledge to a useful purpose. namely finding and using lunar resources. As a result of the recent Clementine and Lunar Prospector missions, we now have global data on the regional surface mineralogy of the Moon, and we have good reason to believe that water exists in the lunar polar regions. However, there is still very little information about the subsurface. If we wish to go to the lunar polar regions to extract water, or if we wish to go anywhere else on the Moon and extract (or learn) anything at all, we need information in three dimensions an understanding of what lies below the surface, both shallow and deep. The terrestrial mining industry provides an example of the logical steps that lead to an understanding of where resources are located and their economic significance. Surface maps are examined to determine likely locations for detailed study. Geochemical soil sample surveys, using broad or narrow grid patterns, are then used to gather additional data. Next, a detailed surface map is developed for a selected area, along with an interpretation of the subsurface structure that would give rise to the observed features. After that, further sampling and geophysical exploration are used to validate and refine the original interpretation, as well as to make further exploration/ mining decisions. Integrating remotely sensed, geophysical, and sample datasets gives the maximum likelihood of a correct interpretation of the subsurface geology and surface morphology. Apollo-era geophysical and automated sampling experiments sought to look beyond the upper few microns of the lunar surface. These experiments, including ground-penetrating radar and spectrometry, proved the usefulness of these methods for determining the best sites for lunar bases and lunar mining operations.

Cooper, B. L.↗

Consequences of Different Air-Sea Feedbacks on Ocean Using MITgcm and MERRA-2 Forcing: Implications for Coupled Data Assimilation Systems

Ocean surface flux estimates from atmospheric and oceanic reanalyses contain errors that compensate for inaccuracies in the respective atmosphere and ocean models used to generate these reanalyses. A conundrum for climate studies is the discrepancy between surface fluxes that minimize model-data differences for an atmosphere-only model vs surface fluxes that minimize model-data differences for an ocean model. As a first step towards a consistent coupled ocean-atmosphere data-assimilation (DA) system, we compare surface net heat flux from a state-of-the-art atmospheric reanalysis, the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), to net heat flux from a state-of-the-art ocean state estimate, the Estimating the Circulation and Climate of the Ocean Version 4 (ECCO-v4). The possible impacts of the MERRA-2 and ECCO-v4 air-sea net heat flux difference in a coupled DA system were assessed using a set of experiments designed to imitate different “flavors” of a coupled DA system in an ocean-only setup. This was done by forcing the ECCO-v4 underlying ocean model - the Massachusetts Institute of Technology general circulation model (MITgcm) - with different sets of MERRA-2 fields and utilizing different forcing methods. By doing so we were able to turn off different air-sea feedbacks which, in a coupled DA setup, are partially muted by the constraining observations. The set of experiments, therefore, represents a range of active feedbacks in different “flavors” of coupled data-assimilation systems. For the period 1992–2011, MERRA-2 net heat flux has a global mean difference of -4.9 Wm(exp -2) relative to ECCO-v4. When MERRA-2 surface fields are used to force MITgcm, imbalances in the energy and the hydrological cycles of MERRA-2, which are directly related to the fact that MERRA-2 was created without an interactive ocean, propagate to the ocean. The experiment in which MITgcm is forced with MERRA-2 fluxes (MERRA-2-flux experiment) results in a 2.5°C global mean Sea Surface Temperature (SST) cooling, a 1m reduction in global mean sea level, and other drastic changes in the large scale ocean circulation relative to those resulting when the MITgcm is forced with the optimized ECCO-v4 net heat flux (the ECCO-v4 experiment itself). When MITgcm is forced with MERRA-2 state variables (MERRA-2-state experiment), the SST is somewhat restored to the observed SST, but the errors are shifted to the water cycle, resulting in a global mean sea level increase of 2.7 m. To further explore the pros and cons of these two approaches, we introduce a new intermediate forcing method in which the ocean is forced with turbulent fluxes but has a long wave feedback. This method, unlike MERRA-2 state, preserves the MERRA-2 water and salinity cycles, and it reduces the SST error compared to the MERRA-2-flux experiment, but the SST is not as good as that in the MERRA-2-state experiment. Our results have implications for ocean-model forcing recipes and clearly reveal the undesirable consequences of limiting the feedbacks in either these types of experiments or in coupled DA.

Ehud Strobach↗

Simple models for complex natural surfaces - A strategy for the hyperspectral era of remote sensing

A two-step strategy for analyzing multispectral images is described. In the first step, the analyst decomposes the signal from each pixel (as expressed by the radiance or reflectance values in each channel) into components that are contributed by spectrally distinct materials on the ground, and those that are due to atmospheric effects, instrumental effects, and other factors, such as illumination. In the second step, the isolated signals from the materials on the ground are selectively edited, and recombined to form various unit maps that are interpretable within the framework of field units. The approach has been tested on multispectral images of a variety of natural land surfaces ranging from hyperarid deserts to tropical rain forests. Data were analyzed from Landsat MSS (multispectral scanner) and TM (Thematic Mapper), the airborne NS001 TM simulator, Viking Lander and Orbiter, AIS, and AVRIS (Airborne Visible and Infrared Imaging Spectrometer).

Adams, John B.↗

On the mechanism of H atom production in hot filament activated H{sub 2} and CH{sub 4}/H{sub 2} gas mixtures

This article reports systematic measurements of the power utilization by Ta (and Re) hot filaments (HFs) operating in a poor vacuum, in pure He, N{sub 2}, and H{sub 2}, and in CH{sub 4}/H{sub 2} gas mixtures of relevance to diamond growth by HF chemical vapor deposition, as functions of filament temperature T{sub fil} (in the range of 1800-2700 K) and gas pressure p (in the range of 10{sup -2}-100 Torr). In the cases of H{sub 2} and the CH{sub 4}/H{sub 2} gas mixtures, the power consumption studies are complemented by in situ measurements of the relative H atom densities [H] near the HF--which are seen to maximize at p{approx}10-20 Torr and thereafter to remain constant or, at the highest T{sub fil}, to decline at higher p. These (and many previous) findings are rationalized by a companion theoretical analysis, which reduces the complex array of chemisorption and desorption processes that must contribute to the HF-surface mediated dissociation of H{sub 2} to a two-step mechanism involving H atom formation by dissociative adsorption at bare (S{sup *}) sites and by desorption at hydrogenated (SH) sites on the HF surface.

36 MATERIALS SCIENCE↗

Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts

The discovery of new and versatile strategies for the immobilization of molecular water-oxidation catalysts (WOCs) is crucial for developing clean energy conversion devices [e.g., (photo)electrocatalytic cells for water splitting]. The traditional approach for surface attachment to transparent conductive oxides [e.g., fluorine doped tin oxide (FTO)] is via synthetic modification of the ligand architecture to incorporate functional groups such as carboxylic acids (-COOH) or phosphonates (-PO 3 H 2 ) prior to immobilization. However, challenges arising from desorption and the cumbersome derivatizations steps have limited the scope and applications of surface-bound WOCs. Herein, we report the successful immobilization of underivatized Ru(II)-based WOCs (Ru–Cat1 = [Ru(tpy) (bpy) (H 2 O)] 2+ (tpy = 2,2':6'2"–terpyridine and bpy = 2,2;-bipyridine) and Ru–Cat2 = [Ru(Mebimpy) (bpy) (H 2 O)] 2+ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) pyridine)) and the Ru(II) polypyridyl chromophore Ru–C3 = [Ru(bpy) 3 ] 2+ onto a FTO plasma-grafted poly(acrylic acid) surface (PAA|FTO). Various characterization techniques such as attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and cyclic voltammetry measurements provide evidence for the plasma-induced grafted PAA|FTO film and immobilization. Surface stability and electrocatalytic properties of these new hybrid composite films upon cycling were investigated at different pH values. Immobilized Ru–Cat1 and Ru–Cat2 onto PAA|FTO displayed pH-dependent (RuIII/RuII) couples and onset potentials indicative of PCET (proton-coupled electron transfer) reactions. Based on cyclic voltammetry results and spectroscopic monitoring, the immobilized WOCs Ru–Cat1 and Ru–Cat2 exhibited a higher surface stability in neutral aqueous solutions relative to Ru–C3 upon electrochemical oxidation. Furthermore, we attribute the surface PCET and stability to the presence of a water ligand in the coordination sphere of immobilized Ru–Cat1 and Ru–Cat2 which can H-bond with negatively charged carboxylate groups of the cross-linked PAA brushes. Our findings demonstrate that the plasma-grafted polymeric network onto FTO offers a versatile platform to directly anchor unmodified homogeneous WOCs or chromophores for potential applications in solar-to-fuel energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of heterogeneous surfaces: Modeling precursor–surface interaction using absorbing Markov chains

Heterogeneous reactive surfaces involving a spatial distribution of reactive sites are ubiquitous in thin film growth, from defect nucleation to step flow growth. In this work, the interaction of gas phase species with heterogeneous reactive surfaces was explored using a model combining absorbing Markov chains and local balance equations. Through this model, single particle statistics can be extracted of the adsorption-diffusion-desorption/reaction process even beyond the transport-limited regime, where the surface coverage of adsorbates, and hence adsorbate-adsorbate interaction, is not negligible, and local rates can be connected with macroscopic quantities, such as the sticking probability and desorption rates. In the transport-limited regime, a similarity law was identified for the sticking probability for both step flow growth and nucleation on randomly distributed reactive sites in which the sticking probability is a function of the product of the local diffusion and reaction probabilities. Lastly, the model can be applied to extract local reactivity maps providing the probability that a particle adsorbing on a given site reacts with the surface. This allows one to explore the development of capture zones and the impact of site-blocking and desorption on the local sticking probabilities.

36 MATERIALS SCIENCE↗

A Theoretical Investigation into the Role of Surface Defects for Oxygen Evolution on RuO 2

Here, the inability of conventional theoretical models to corroborate the well-known experimental activity of RuO 2 for the oxygen evolution reaction (OER) has recently been the subject of numerous research efforts. In this study, we use density functional theory calculations to investigate the possibility that surface defects formed during dissolution are responsible for the OER activity of RuO 2 . It has been well-established experimentally that RuO 2 undergoes dissolution during OER, yet little is known about the atomic structure or catalytic reactivity of the resulting defect sites. Through simulation of point defects, steps, and kinks derived from the RuO 2 (110) surface, we discover a 0.7 eV range in the primary descriptor for OER activity, with the most active sites outperforming those at the ideal (110) surface by nearly 0.5 eV. We postulate that these variations in reactivity are due to differences in the local electronic structure, and we investigate in more detail the electronic structure of two singly coordinated sites at the same Ru atom located at a kink. Finally, we investigate possible dissolution pathways that may proceed at the RuO 2 surface under OER conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Reduction by Homogeneous Molecular Catalysts and Electrocatalysts

The oxygen reduction reaction (ORR) is a key component of biological processes and energy technologies. This review provides a comprehensive report of soluble molecular catalysts and electrocatalysts for the ORR. The precise synthetic control and relative ease of mechanistic study for homogeneous molecular catalysts, as compared to heterogeneous materials or surface-adsorbed species, enables a detailed understanding of the individual steps of ORR catalysis. Thus, the review places particular emphasis on ORR mechanism and thermodynamics. First, the thermochemistry of oxygen reduction and the factors influencing ORR efficiency are described to contextualize the discussion of catalytic studies that follows. Reports of ORR catalysis are presented in terms of their mechanism, with separate sections for catalysis proceeding via initial outer- and inner-sphere electron transfer to O2. The rates and selectivities (for production of H2O2 vs H2O) of these catalysts are provided, along with suggested methods for accurately comparing catalysts of different metals and ligand scaffolds that were examined under different experimental conditions.

oxygen, electrocatalysis, molecular↗

Thermal conductance of aluminum oxy-fluoride passivation layers

Here, the thermal properties of plasma-generated aluminum oxyfluoride passivation layers at the surface of aluminum thin films are measured. The oxyfluoride layers are generated using plasmas produced in mixtures of NH 3 and SF 6 to simultaneously remove oxygen and add fluorine to the aluminum surface, an alternative approach to the more conventional two-step methods that utilize HF treatments to remove the native oxide followed by metal-fluoride (e.g., MgF 2 , LiF, and AlF 3 ) thin film deposition that serves to protect the aluminum surface from further oxidation. Here, the change in thermal properties of the layers as a function of plasma processing time is determined. A significant reduction in thermal boundary conductance is measured with the increasing treatment time, which can be related to the increasing fluorine content in the layers. Acoustic reflection measurements suggest this reduced thermal boundary conductance is related to lower bonding strength to aluminum with increasing fluorine.

36 MATERIALS SCIENCE↗

Evaluation of various cleaning methods to remove bacillus spores from spacecraft hardware materials

A detailed study was made of the biological cleaning effectiveness, defined in terms of the ability to remove bacterial spores, of a number of methods used to clean hardware surfaces. Aluminum (Al 6061) and titanium (Ti 6Al-4V) were chosen for the study as they were deemed the two materials most likely to be used in spacecraft extraterrestrial sampler construction. Metal coupons (1 cm x 2.5 cm) were precleaned and inoculated with 5.8 x 10(3) cultivable Bacillus subtilis spores, which are commonly found on spacecraft surfaces and in the assembly environments. The inoculated coupons were subsequently cleaned using: (1) 70% isopropyl alcohol wipe; (2) water wipe; (3) multiple-solvent flight-hardware cleaning procedures used at the Jet Propulsion Laboratory (JPL); (4) Johnson Space Center-developed ultrapure water rinse; and (5) a commercial, semi-aqueous, multiple-solvent (SAMS) cleaning process. The biological cleaning effectiveness was measured by agar plate assay, sterility test (growing in liquid media), and epifluorescent microscopy. None of the cleaning protocols tested completely removed viable spores from the surface of the aluminum. In contrast, titanium was capable of being cleaned to sterility by two methods, the JPL standard and the commercial SAMS cleaning process. Further investigation showed that the passivation step employed in the JPL standard method is an effective surface sterilant on both metals but not compatible with aluminum. It is recommended that titanium (Ti 6Al-4V) be considered superior to aluminum (Al 6061) for use in spacecraft sampling hardware, both for its potential to be cleaned to sterilization and for its ability to withstand the most effective cleaning protocols.

Spores, Bacterial/metabolism↗

Evaluation of Various Cleaning Methods to Remove Bacillus Spores from Spacecraft Hardware Materials

A detailed study was made of the biological cleaning effectiveness, defined in terms of the ability to remove bacterial spores, of a number of methods used to clean hardware surfaces. Aluminum (Al 6061) and titanium (Ti 6Al-4V) were chosen for the study as they were deemed the two materials most likely to be used in spacecraft extraterrestrial sampler construction. None of the cleaning protocols tested completely removed viable spores from the surface of the aluminum. In contrast, titanium was capable of being cleaned to sterility by two methods, the JPL standard and the commercial SAMS cleaning process. Further investigation showed that the passivation step employed in the JPL standard method is an effective surface sterilant on both metals but not compatible with aluminum. It is recommended that titanium (Ti 6Al-4V) be considered superior to aluminum (Al 6061) for use in spacecraft sampling hardware, both for its potential to be cleaned to sterilization and for its ability to withstand the most effective cleaning protocols.

planetary protection↗