Search NASA⌕ Search

SEARCH · Search NASA

Results for “ION IMPLANTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Implanter Source Life and Stability Improvement Using In-Situ Chemical Cleaning

Current 300 mm fabs rely heavily on automation to provide manufacturing efficiency. While implant processes and equipment follow this trend, tool availability and maintenance cycles are often driven by the ion source and adjacent areas which suffer from premature failures due to unwanted material deposits. While working in a high volume production environment, side by side comparative data has been collected on two tools running similar processes, with one tool having integrated in-situ cleaning cycles and the other with no in-situ cleaning. This paper will discuss significant improvements achieved in beam stability, glitch rate, ion source lifetime and maintenance cycles which were achieved on the tool with integrated in-situ cleaning. A program was established at Texas Instruments' DMOS6 wafer fab in early 2007 to explore and document process and equipment performance. Other critical areas, such as particle and metals contamination will be discussed with inferences as to potential yield improvements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field-induced spin polarization in the lightly Cr-substituted layered antiferromagnet NiP S 3

Tuning magnetic properties in layered magnets is an important route to realize novel phenomenon related to two-dimensional (2D) magnetism. Recently, tuning antiferromagnetic (AFM) properties through substitution and intercalation techniques has been widely studied in MPX 3 compounds. Interesting phenomena, such as diverse AFM structures and even the signatures of ferrimagnetism, have been reported. However, long-range ferromagnetic (FM) ordering has remained elusive. Here, in this work, we explored the magnetic properties of the Cr-substituted NiP S 3 . We found that Cr substitution is extremely efficient in controlling spin orientation in NiP S 3 . Our study reveals a field-induced spin polarization in lightly (9%) Cr-substituted NiP S 3 , which is likely attributed to the attenuation of AFM interactions and magnetic anisotropy due to Cr doping. Our work provides a possible strategy to achieve FM phase in AFM MPX 3 , which could be useful for investigating 2D magnetism as well as potential device applications.

2-dimensional systems↗

Angle Performance on Optima XE

Angle control on high energy implanters is important due to shrinking device dimensions, and sensitivity to channeling at high beam energies. On Optima XE, beam-to-wafer angles are controlled in both the horizontal and vertical directions. In the horizontal direction, the beam angle is measured through a series of narrow slits, and any angle adjustment is made by steering the beam with the corrector magnet. In the vertical direction, the beam angle is measured through a high aspect ratio mask, and any angle adjustment is made by slightly tilting the wafer platen during implant.Using a sensitive channeling condition, we were able to quantify the angle repeatability of Optima XE. By quantifying the sheet resistance sensitivity to both horizontal and vertical angle variation, the total angle variation was calculated as 0.04 deg. (1{sigma}). Implants were run over a five week period, with all of the wafers selected from a single boule, in order to control for any crystal cut variation.

43 PARTICLE ACCELERATORS↗

Iron implantation in {alpha}-Al{sub 2}O{sub 3}

Single crystal and ceramic {alpha}-Al{sub 2}O{sub 3} samples were implanted with {sup 57}Fe ions at different fluences, and different charge states of Fe were determined. The hyperfine interaction data showed that implanted ions are in Fe{sup 0}, Fe{sup 2+}, and Fe{sup 3+} states depending on the fluence. It is shown that after the annealing of the implanted sample in a 2.5CO 1CO{sub 2} atmosphere Fe spinel forms. The phase diagram of Fe-Al-O in a limited concentration range was studied by determining the hyperfine interaction parameters of the formed phases after annealing the samples in different atmospheres. The hyperfine interaction parameters of an ion implanted {alpha}-Al{sub 2}O{sub 3} sample annealed in a 2.5CO 1CO{sub 2} atmosphere at different temperatures were determined. The hyperfine interaction parameters of the gradually forming Fe-spinel phase were compared with the values of synthesized Fe-spinel crystal.

36 MATERIALS SCIENCE↗

Local modification of the magnetic vortex-core velocity by gallium implantation

The dynamics of magnetic vortices in microsquares with local modifications of magnetic parameters and thickness are investigated. By implanting gallium ions with focussed ion beam into permalloy thin-film elements, we have locally tailored their magnetic properties and the layer thickness. The vortex of the Landau domain pattern of a square is resonantly excited to a gyrotropic motion and crosses regions with and without implantation. With time-resolved scanning transmission x-ray microscopy, we observe an abrupt change in the vortex velocity close to the borders between the two regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal orientation effects on helium ion depth distributions and adatom formation processes in plasma-facing tungsten

We present atomistic simulations that show the effect of surface orientation on helium depth distributions and surface feature formation as a result of low-energy helium plasma exposure. We find a pronounced effect of surface orientation on the initial depth of implanted helium ions, as well as a difference in reflection and helium retention across different surface orientations. Our results indicate that single helium interstitials are sufficient to induce the formation of adatom/substitutional helium pairs under certain highly corrugated tungsten surfaces, such as (1 1 1)-orientations, leading to the formation of a relatively concentrated layer of immobile helium immediately below the surface. The energies involved for helium-induced adatom formation on (1 1 1) and (2 1 1) surfaces are exoergic for even a single adatom very close to the surface, while (0 0 1) and (0 1 1) surfaces require two or even three helium atoms in a cluster before a substitutional helium cluster and adatom will form with reasonable probability. This phenomenon results in much higher initial helium retention during helium plasma exposure to (1 1 1) and (2 1 1) tungsten surfaces than is observed for (0 0 1) or (0 1 1) surfaces and is much higher than can be attributed to differences in the initial depth distributions alone. The layer thus formed may serve as nucleation sites for further bubble formation and growth or as a source of material embrittlement or fatigue, which may have implications for the formation of tungsten “fuzz” in plasma-facing divertors for magnetic-confinement nuclear fusion reactors and/or the lifetime of such divertors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of ion-doped ZnO(Se) layers in the context of band anticrossing theory

The study of the optical properties of ZnO(Se) is a continuation of previous studies of ZnS(O), ZnSe(O), and CdS(O) systems in the context of band anticrossing theory. Selenium ions are implanted into high-purity zinc oxide crystals to a concentration of 10{sup 20} cm{sup –3}. The microcathodoluminescence spectra recorded with a scanning electron microscope at a temperature of 100 K provide information from the bulk of the implanted layer. The origin of the orange-red luminescence of ZnO(Se)–Zn layers is clarified. Orangered luminescence is thought to be a result of the formation of a highly mismatched alloy system, in which ZnSe(O) is formed during implantation and radiation annealing. Data suggesting that the green luminescence of pure self-activated ZnO–Zn is the self-activated (SA) emission studied in detail for other II–VI compounds (ZnS(O), ZnSe(O)) and defined by intrinsic defect complexes (A centers) are reported.

36 MATERIALS SCIENCE↗

Next Generation Angle Control for Medium Current and High Energy Implanters

Angle control continues to increase in importance with device scaling. For instance, threshold voltage and on-state current in advanced logic devices depend critically on the angle accuracy of medium current halo implants. TCAD simulation results, showing that on-state current changes of greater than 1% per degree of implant angle are possible, are presented. We report here on improvements to angle performance and control in both the horizontal and vertical directions. Beam data covering the full operating space of the VIISta 900XP is presented, demonstrating total angle control of better than {+-}0.2 deg. The data set is chosen to emphasize performance of typical halo implants. Single wafer high energy angle control data is also presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The structure of the NiTi surface layers after the ion-plasma alloying of Ta

The effect of the Ta-ion beam implantation on the micro- and nanostructures of the surface layers of NiTi alloy was investigated using transmission electron microscopy and Auger spectroscopy. It is found that the elements are distributed non-uniformly with depth, so that the sublayers differ significantly in structure. The modified surface layer was found to consist of two sublayers, i.e. the upper oxide layer and the lower-lying amorphous layer that contains a maximum of Ta atoms.

36 MATERIALS SCIENCE↗

Integration of an Axcelis Optima HD Single Wafer High Current Implanter for p- and n-S/D Implants in an Existing Batch Implanter Production Line

This paper is focused on the integration and qualification of an Axcelis Optima HD single wafer high current spot beam implanter in an existing 200 mm production line with different types of Axcelis batch implanters for high current applications. Both the design of the beamline and the beam shape are comparable between single wafer and batch high current spot beam implanters. In contrast to the single wafer high current ribbon beam implanter, energy contamination is not a concern for the considered spot beam tool because the drift mode can be used down to energies in the 2 keV region. The most important difference between single wafer and batch high current implanters is the significantly higher dose rate and, therefore, the higher damage rate for the single wafer tool due to the different scanning architecture. The results of the integration of high dose implantations, mainly for p- and n-S/D formation, for DRAM 110 nm without pre-amorphization implantation (PAI), CMOS Logic from around 250 nm down to 90 nm without and with PAI, are presented and discussed. Dopant concentration profile analysis using SIMS was performed for different technologies and implantation conditions. The impurity activation was measured using sheet resistance and in some cases spreading resistance technique was applied. The amorphous layer thickness was measured using TEM. Finally, device data are presented in combination with dose, energy and beam current variations. The results have shown that the integration of implantation processes into crystalline structure without PAI is more complex and time consuming than implantations into amorphous layer where the damage difference due to the different dose rates is negligible.

36 MATERIALS SCIENCE↗

The Role of Implanter Parameters on Implant Damage Generation: an Atomistic Simulation Study

In this article we use atomistic process simulation to study the effect of some implanter parameters on damage accumulation for two types of implanters: a batch tool with a spot ion beam and a single-wafer tool with a ribbon beam. The studied parameters are the scanning speed, the wheel rotation speed and the beam diameter for the former, and the scanning speed and the beam width for the latter. We kept constant not only the species, dose and energy, but also the average dose rate, managed by the beam current, the wafer temperature (T). In such conditions damage accumulation is expected to be constant. However we show that beam focalization has a strong impact, because it affects the instantaneous dose rate. We define the instantaneous dose rate as the dose rate seen by a point of the wafer while it passes through the beam. Its effects on damage accumulation are comparable to those of wafer T and average dose rate.

36 MATERIALS SCIENCE↗

Incorporation of erbium ions into thin-film lithium niobate integrated photonics

As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. In this work, we investigate the optical properties at 1.5 μm wavelengths of rare-earth ions (Er 3+ ) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post-annealing show that ion implantation damage can be repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized. The ion-cavity coupling is observed through a Purcell enhanced fluorescence from which a Purcell factor of 3.8 ± 0.5, compared with waveguide lifetime, is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.

36 MATERIALS SCIENCE↗

Fracture in Hydrogen-Implanted Germanium

We have studied the mechanism of fracture in hydrogen-implanted Ge. First, the as-implanted Ge state and its evolution during subsequent annealing were characterized via TEM and FTIR-MIR spectroscopy. Results showed that the extended defects formation and growth follow the same basic mechanism in Ge as in Si, which is the reference material. Nevertheless, the global damage level in the implanted Ge layer is higher compared to Si. Second, the fracture step was studied via the fracture kinetics analysis, SIMS and AFM on the transferred layer. An activation energy comparable to the reported data from blistering studies was obtained. Just like in Si, the Cmax of H in Ge measured via SIMS was found to decrease during the fracture anneal. This decrease is associated with the formation of gaseous H{sub 2} that pressurizes the internal cavities and then contributes to the fracture. Finally, a high roughness of the Ge transferred layer was measured, which results from the large thickness of the implantation damaged zone.

36 MATERIALS SCIENCE↗

The Effect of Amorphization Conditions on the Measured Activation of Source Drain Extension Implants

Un-patterned wafers were processed using low-dose Indium or medium-dose Germanium pre-amorphization implants (PAI) followed by p-type dopant implants of BF{sub 2} or carborane (CBH). The wafers were then annealed by RTA (spike), laser anneal (LSA) or combination of LSA and spike. Active dopant distributions calculated from SIMS and sheet resistance measurements compared favorably with those determined by differential Hall, which is a challenging technique for shallow profiles. The trends in B diffusion behavior and activation are discussed in relation to the different implant damage budgets, damage evolution during the anneals and presence of fluorine. In particular, for low thermal budget LSA only anneals, CBH implants appear to give higher activation than BF{sub 2} due to the absence of fluorine.

36 MATERIALS SCIENCE↗

Origins of ferromagnetism in transition-metal doped Si

We present results of the magnetic, structural, and chemical characterizations of Mn{sup +}-implanted Si displaying n-type semiconducting behavior and ferromagnetic ordering with Curie temperature, T{sub C}, well above room temperature. The temperature-dependent magnetization measured by superconducting quantum interference device from 5 to 800 K was characterized by three different critical temperatures (T{sub C}*{approx}45 K, T{sub C1}{approx}630-650 K, and T{sub C2}{approx}805-825 K). Their origins were investigated using dynamic secondary ion mass spectroscopy and transmission electron microscopy (TEM) techniques, including electron energy loss spectroscopy, Z-contrast scanning TEM imaging, and electron diffraction. We provided direct evidences of the presence of a small amount of Fe and Cr impurities which were unintentionally doped into the samples together with the Mn{sup +} ions as well as the formation of Mn-rich precipitates embedded in a Mn-poor matrix. The observed T{sub C}* is attributed to the Mn{sub 4}Si{sub 7} precipitates identified by electron diffraction. Possible origins of T{sub C1} and T{sub C2} are also discussed. Our findings raise questions regarding the origin of the high-T{sub C} ferromagnetism reported in many material systems without a careful chemical analysis.

36 MATERIALS SCIENCE↗

B{sub 18}H{sub 22} Implantation for the Source-Drain Extension in 45 nm-node PMOSFETs and Beyond

We investigated the application properties of cluster implantation for MSA processing. We successfully replaced BF{sub 2} with B{sub 18}H{sub 22} to SDE implantation in pMOSFETs with the activation processing of MSA and spike-RTA. In the activation processing with only MSA, we found from blank wafer that B{sub 18}H{sub 22} implant is more advantageous from the viewpoint of R{sub s}, X{sub j} and leakage current, compared to B, BF{sub 2} and B with Ge-PAI00.

36 MATERIALS SCIENCE↗

Three-dimensional view of the shape, size, and atomic composition of ordered nanostructures by Rutherford backscattering spectrometry

Conventional Rutherford backscattering spectrometry (RBS) in combination with Monte Carlo simulations performed on 3D model cells allow the self-consistent determination of the shape, size, and atomic composition of silica particles as model structures, on the submicron scale. Spherical and ellipsoidal particle shapes and the spatial distribution of implanted Ar and Xe in the particles and in the unmasked zones of the underlying substrate is investigated. We demonstrate that both lateral and depth information for ordered nano-objects can be derived from multiple RBS spectrum analysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultra-Shallow P{sup +}/N Junction Formation in Si Using Low Temperature Solid Phase Epitaxy Assisted with Laser Activation

A combination of Ge pre-amorphization implantation (Ge-PAI), low-energy B implantation and laser annealing is a promising method to form highly-activated, abrupt and ultra-shallow junctions (USJ). In our previous report of IIT 2006, we succeeded in forming pn junctions less than 10 nm using non-melt double-pulsed green laser. However, a large leakage current under reverse bias was observed consequently due to residual defects in the implanted layer. In this study, a method to form USJ is proposed: a combination of low-temperature solid phase epitaxy and non-melt laser irradiation for B activation. Ge pre-amorphization implantation was performed at energy of 6 keV with a dose of 3x10{sup 14}/cm{sup 2}. Then B implantation was performed at energy of 0.2 keV with a dose of 1.2x10{sup 15}/cm{sup 2}. Samples were annealed at 400 deg. C for 10 h in nitrogen atmosphere. Subsequently, non-melt laser irradiation was performed at energy of 690 mJ/cm{sup 2} and pulse duration of 100 ns with intervals of 300 ns. As a result, USJ around 10 nm with better crystallinity was successfully formed. And the leakage current of pn diodes was reduced significantly. Moreover, it is proven from secondary ion mass spectroscopy (SIMS) analysis that transient enhanced diffusion (TED) of B is specifically suppressed.

36 MATERIALS SCIENCE↗